Search NASA⌕ Search

SEARCH · Search NASA

Results for “deformation function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

First Observation of Multiple Transverse Wobbling Bands of Different Kinds in 183 Au

Here, we report the first observation of two wobbling bands in 183 Au, both of which were interpreted as the transverse wobbling (TW) band but with different behavior of their wobbling energies as a function of spin. It increases (decreases) with spin for the positive (negative) parity configuration. The crucial evidence for the wobbling nature of the bands, dominance of the $\textit{E}$2 component in the Δ$\textit{I}$ = 1 transitions between the partner bands, is provided by the simultaneous measurements of directional correlation from the oriented states ratio and the linear polarization of the $\textit{γ}$ rays. Particle rotor model calculations with triaxial deformation reproduce the experimental data well. A value of spin, $I_m$, has been determined for the observed TW bands below which the wobbling energy increases and above which it decreases with spin. The nucleus 183 Au is, so far, the only nucleus in which both the increasing and the decreasing parts are observed and thus gives the experimental evidence of the complete transverse wobbling phenomenon.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The Sealing Mechanisms of a Fracture in Opalinus Clay as Revealed by in situ Synchrotron X-Ray Micro-Tomography

The detailed mechanisms of the sealing of a single fracture, from hydration to almost complete closure by increase of confining pressure, as monitored from in situ synchrotron X-ray microtomography during the flow of carbonated water, is here shown for the first time. Different mechanisms play the key role at different stages in the evolution of the fracture. Hydration mechanically weakens the surfaces of the fracture and induces a first closure due to microcracking at the asperity contacts, increasing their size and creating choke points. Increase in confining stress promptly hydraulically seals the fracture by closing the main choke point, with a relative small deformation of the sample. Finally, the more pervasive mechanical deformation observed at higher stresses almost completely seals the whole fracture. The evolution of the sample has been described and quantified using 4D image processing, focusing on the evolution of aperture and digital volume correlation. Hydraulic properties of the sample at different stages have been modeled via Stokes flow simulation, and the results compared to the morphometric analysis, finding positive correlations with the average fracture aperture variation along the flowpath in function of confining pressure. Opalinus Clay is found to be a rock markedly prone to sealing in case of flow with carbonated water; this behavior is the result of the large fraction of clays and of its microstructure, lacking both cementing phases and large stiff particles. CO2 in this sample has no evident role in the evolution of the fracture; chemically induced weathering on the surface has not been detected, in contrast with the behavior observed in samples with carbonates as cementing phase.

58 GEOSCIENCES↗
DOE OSTI2020

Anatomical and hydraulic responses to desiccation in emergent conifer seedlings

Premise The young seedling life stage is critical for reforestation after disturbance and for species migration under climate change, yet little is known regarding their basic hydraulic function or vulnerability to drought. Here, we sought to characterize responses to desiccation including hydraulic vulnerability, xylem anatomical traits, and impacts on other stem tissues that contribute to hydraulic functioning. Methods Larix occidentalis , Pseudotsuga menziesii , and Pinus ponderosa (all ≤6 weeks old) were imaged using x‐ray computed microtomography during desiccation to assess seedling biomechanical responses with concurrently measured hydraulic conductivity ( k s ) and water potential ( Ψ ) to assess vulnerability to xylem embolism formation and other tissue damage. Results In non‐stressed samples for all species, pith and cortical cells appeared circular and well hydrated, but they started to empty and deform with decreasing Ψ which resulted in cell tearing and eventual collapse. Despite the severity of this structural damage, the vascular cambium remained well hydrated even under the most severe drought. There were significant differences among species in vulnerability to xylem embolism formation, with 78% xylem embolism in L. occidentalis by Ψ of −2.1 MPa, but only 47.7% and 62.1% in P. ponderosa and P. menziesii at −4.27 and −6.73 MPa, respectively. Conclusions Larix occidentalis seedlings appeared to be more susceptible to secondary xylem embolism compared to the other two species, but all three maintained hydration of the vascular cambium under severe stress, which could facilitate hydraulic recovery by regrowth of xylem when stress is relieved.

Miller, Megan L.↗
DOE OSTI2020

Modeling the dynamic response of rock masses with multiple compliant fluid saturated joint sets—Part I: Mesoscale simulations

Recently a mesoscale model was developed that includes thermomechanically consistent constitutive equations with dissipation due to porous compaction, inelastic distortional deformation rate, and slipping on persistent dry joint surfaces. In this Part I of a two-part paper, we describe enhancements of the mesoscale model which include: normal compliance with hysteresis, non-persistent joints with finite area, joint sets with angular deviation, and the weakening effect of fluid pressure in the joints. Examples study the influences of these effects on average strength. These computationally expensive simulations are used to inspire functional forms in a continuum model, described in Part II, which is needed for large scale simulations of real applications.

42 ENGINEERING↗
DOE OSTI2026

Latent space dynamics identification for interface tracking with application to shock-induced pore collapse

Capturing sharp, evolving interfaces remains a central challenge in reduced-order modeling, especially when data is limited and the system exhibits localized nonlinearities or discontinuities. Here, we propose LaSDI-IT (Latent Space Dynamics Identification for Interface Tracking), a data-driven framework that combines low-dimensional latent dynamics learning with explicit interface-aware encoding to enable accurate and efficient modeling of physical systems involving moving material boundaries. At the core of LaSDI-IT is a revised autoencoder architecture that jointly reconstructs the physical field and an indicator function representing material regions or phases, allowing the model to track complex interface evolution without requiring detailed physical models or mesh adaptation. The latent dynamics are learned through linear regression in the encoded space and generalized across parameter regimes using Gaussian process interpolation with greedy sampling. We demonstrate LaSDI-IT on the problem of shock-induced pore collapse in high explosives, a process characterized by sharp temperature gradients and dynamically deforming pore geometries. The method achieves relative prediction errors below 9% across the parameter space, accurately recovers key quantities of interest such as pore area and hot spot formation, and matches the performance of dense training with only half the data. This latent dynamics prediction was 10 6 times faster than the conventional high-fidelity simulation, proving its utility for multi-query applications. These results highlight LaSDI-IT as a general, data-efficient framework for modeling discontinuity-rich systems in computational physics, with potential applications in multiphase flows, fracture mechanics, and phase change problems.

Gaussian process↗
DOE OSTI2019

Electron Transport Properties of Al x Ga 1 – x N / Ga N Transistors Based on First-Principles Calculations and Boltzmann-Equation Monte Carlo Simulations

High-electron-mobility transistors (HEMTs) based on Al x Ga 1–x N/GaN heterostructures have great potential for applications in power electronics and radio frequency applications. Operating under large bias and electric fields, hot electrons are present in the channel where they can activate preexisting benign defects that cause scattering or carrier trapping, resulting in device degradation, such as threshold-voltage shifts and transconductance degradation. We report a comprehensive investigation of the electron transport properties of wurtzite-phase GaN and AlN and of an Al 0.25 Ga 0.75 N/GaN HEMT by solving the Boltzmann transport equation with a synchronous ensemble Monte Carlo technique and employing first-principles electronic properties, including the full energy bands, phonon dispersions, and electron-phonon scattering rates. We find that, for electron collisions with the highest-energy optical phonon mode, nonpolar scattering by optical phonons contributes comparable to polar scattering. Polar scattering with acoustic phonons, that is, piezoelectric scattering, is found to be as important as the polar scattering with optical phonons for low-energy electrons at room temperature. Here, we compare the calculated high-field transport characteristics of bulk GaN with previously reported results. We also calculate the nonpolar acoustic deformation potential, nonpolar optical deformation potential, and high-field transport characteristics of bulk AlN. We find that inclusion of piezoelectric scattering results in a low-field electron mobility of approximately 450cm 2 /(V s), which is very close to the experimental value. Simulation results are presented for an Al 0.25 Ga 0.75 N/GaN HEMT, including electric field, average carrier kinetic energy, and drift velocity in the channel. Finally, we present the carrier energy distribution function in the conducting channel, which is key to accurately determine hot-carrier-caused device degradation and identify possible routes to an improved device design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Vibronic States and Their Effect on the Temperature and Strain Dependence of Silicon-Vacancy Qubits in 4$\textit{H}$-SiC

Silicon-vacancy qubits in silicon carbide ( Si C ) are emerging tools in quantum-technology applications due to their excellent optical and spin properties. In this paper, we explore the effect of temperature and strain on these properties by focusing on the two silicon-vacancy qubits, V1 and V2, in 4$\textit{H}$-SiC. We apply density-functional theory beyond the Born-Oppenheimer approximation to describe the temperature-dependent mixing of electronic excited states assisted by phonons. We obtain a polaronic gap of around 5 and 22 meV for the V1 and V2 centers, respectively, which results in a significant difference in the temperature-dependent dephasing and zero-field splitting of the excited states, which explains recent experimental findings. Finally, we also compute how crystal deformations affect the zero-phonon line of these emitters. Our predictions are important ingredients in any quantum applications of these qubits sensitive to these effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

The experimentally measured grain-orientation-dependent residual lattice strains, evolved in an interstitia-free steel after 70% cold rolling reduction, are studied by means of crystal elastic visco-plastic finite element simulations, which provides a very satisfactory prediction of deformation texture. The calculated residual lattice strain pole figure matches well with the experimentally measured counterpart within the highest density regions of major texture components observed. Both experimental evidence and results of modeling clearly indicate that the residual lattice strain is orientation dependent, based on comprehensive information on the evolution of residual lattice strain in various crystallographic orientations during plastic deformation. It appears that in a cold rolled material, there is a general correlation between the stresses developed just prior to unloading and the residual lattice strains in particular directions. Here, it is also shown that the cumulative plastic shear does not reveal a clear correlation with the components of residual lattice strain while presented in the normal correlation plot, however, this relationship can be better understood by means of the orientation distribution function of residual lattice strain, which can be derived from the neutron or X-ray diffraction experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Machine learning the density functional theory potential energy surface for the inorganic halide perovskite CsPbBr 3

The temperature and pressure dependence of structural phase transitions determine the structure-functionality relationships in many technologically important materials. Harmonic Hamiltonians have proven successful in predicting the vibrational properties of many materials. However, they are inadequate for modeling structural phase transitions in crystals with potential energy surfaces that are either strongly anharmonic or nonconvex with respect to collective atomic displacements or homogeneous strains. In this paper we develop a framework to express highly anharmonic first-principles potential energy surfaces as polynomials of collective cluster deformations. We further adapt the approach to a nonlinear extension of the cluster expansion formalism through the use of an artificial neural net model. Finally, the machine learning models are trained on a large database of first-principles calculations and are shown to reproduce the potential energy surface with low error.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Insights into Plastic Localization by Crystallographic Slip from Emerging Experimental and Numerical Approaches

Advanced experimental and numerical approaches are being developed to capture the localization of plasticity at the nanometer scale as a function of the multiscale and heterogeneous microstructure present in metallic materials. These innovative approaches promise new avenues to understand microstructural effects on mechanical properties, accelerate alloy design, and enable more accurate mechanical property prediction. This article provides an overview of emerging approaches with a focus on the localization of plasticity by crystallographic slip. New insights into the mechanisms and mechanics of strain localization are addressed. The consequences of the localization of plasticity by deformation slip for mechanical properties of metallic materials are also detailed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Sample problems for Section III, Division 5 design by inelastic analysis of Grade 91 components

This report works through two sample design analyses of representative Grade 91 components using the ASME Boiler & Pressure Vessel Code Section III, Division 5, Appendix HBB-T rules for the strain and deformation and creep-fatigue design criteria using a design by inelastic analysis approach. The component geometries and loadings were selected to span a wide variety of potential applications. The sample components are an endplate geometry, which is fairly representative of typical pressure vessel construction, and a core block, representing a critical component in a heat pipe microreactor, which has a complicated geometry and complex thermal stress history. These sample problems serve several functions. First, they are complete worked examples of how to apply the current design by inelastic analysis rules. Second, they serve as test cases to evaluate the current rules and provide feedback on how they could be optimized to deal with complicated component geometries or to be better automated in modern finite element analysis software. Finally, the analysis here uses an inelastic constitutive model for Grade 91 developed by Argonne National Laboratory and proposed for inclusion in the ASME Boiler & Pressure Vessel Code Section III, Division 5 rules as a reference constitutive model. Using this constitutive model in the sample problem analyses tests the model in the context of the ASME Code rules. The final conclusions of this report are that the material model and the current Code rules are satisfactory, but that the Code rules could be optimized to simplify automation and reduce over conservatism. Future work should address the specific optimization topics discussed in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2017

The analytic structure of conformal blocks and the generalized Wilson-Fisher fixed points

Here, we describe in detail the method used in our previous work arXiv:1611.10344 to study the Wilson-Fisher critical points nearby generalized free CFTs, exploiting the analytic structure of conformal blocks as functions of the conformal dimension of the exchanged operator. Our method is equivalent to the mechanism of conformal multiplet recombination set up by null states. We also compute, to the first non-trivial order in the ε-expansion, the anomalous dimensions and the OPE coefficients of infinite classes of scalar local operators using just CFT data. We study single-scalar and O(N)-invariant theories, as well as theories with multiple deformations. When available we agree with older results, but we also produce a wealth of new ones. Furthermore, unitarity and crossing symmetry are not used in our approach and we are able to apply our method to non-unitary theories as well. Some implications of our results for the study of the non-unitary theories containing partially conserved higher-spin currents are briefly mentioned.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Structural study of the effects of mutations in proteins to identify the molecular basis of the loss of local structural fluidity leading to the onset of autoimmune diseases

Protein-Protein Interactions (PPIs) are crucial in most of the biological processes and PPI dysfunctions are known to be associated with the onsets of various diseases. One of such diseases is the auto-immune disease. Auto-immune diseases are one among the less studied group of diseases with very high mortality rates. Thus, we tried to correlate the appearances of mutations with their probable biochemical basis of the molecular mechanisms leading to the onset of the disease phenotypes. We compared the effects of the Single Amino Acid Variants (SAVs) in the wild type and mutated proteins to identify any structural deformities that might lead to altered PPIs leading ultimately to disease onset. For this we used Relative Solvent Accessibility (RSA) as a spatial parameter to compare the structural perturbation in mutated and wild type proteins. We observed that the mutations were capable to increase intra-chain PPIs whereas inter-chain PPIs would remain mostly unaltered. This might lead to more intra-molecular friction causing a deleterious alteration of protein's normal function. A Lyapunov exponent analysis, using the altered RSA values due to polymorphic and disease causing mutations, revealed polymorphic mutations have a positive mean value for the Lyapunov exponent while disease causing mutations have a negative mean value. Thus, local spatial stochasticity has been lost due to disease causing mutations, indicating a loss of structural fluidity. The amino acid conversion plot also showed a clear tendency of altered surface patch residue conversion propensity than polymorphic conversions. So far, this is the first report that compares the effects of different kinds of mutations (disease and non-disease causing polymorphic mutations) in the onset of autoimmune diseases. - Highlights: • Protein-Protein Interaction. • Changes in Relative Solvent Accessibility (RSA). • Amino acid conversion matrix. • Polymorphic mutations. • Disease causing mutations.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Antielectrophoretic Response-Driven Bending–Tilting Deformation of Cationic Polyelectrolyte Brushes Drives Nonlinear Electroosmotic Transport in Brush-Grafted Nanochannels

In this paper, we use all-atom molecular dynamics (MD) simulations to describe a non-linearly enhanced electroosmotic (EOS) flow, where, in a nanochannel grafted with cationic PMETAC ([Poly(2-(Methacryloyloxy)Ethyl) Trimethylammonium Chloride]) brushes, a two-fold increase in the electric field strength leads to a several-fold (more than two-fold) increase in the EOS flow strength and volume flow rate. The electric field enforces the PMETAC brushes to undergo a bending-tilting driven deformation with a significant portion of the brush layer becoming parallel to the grafting surface. In response, a substantial fraction of the counterions leave the brush layer (hence become more mobile), but instead of going into the bulk, accumulate at the brush-bulk interface, i.e., stay in proximity of the brush segments aligned parallel to the grafting surface. This creates an interesting situation, where the counterions are not completely within the brush layer, yet they fully screen the brush charges. Such “freer” conditions enable the counterions to achieve very high velocity, thereby ensuring that the water solvating the counterions themselves move very fast triggering the significantly augmented EOS transport. Probing deeper we can identify that the bending-tilting driven brush deformation, enforcing the brushes to align parallel to the substrate, results from the anti-electrophoretic behavior of the brushes, where despite being positively charged, the brushes move against the electric field direction. Such an anti-electrophoretic behavior of the PE brushes, which has not been reported before, can be associated with the very fast velocities of the negatively charged counterions and the electrostatic and hydrodynamic coupling of the counterions with the positive functional groups of the brushes. Here, we anticipate that the findings of this paper will shed light on strategies for nanochannel flow, the anti-electrophoretic response of charged polymer chains, and the significance of capturing the detailed chemical architecture of polyelectrolytes in nanoscale science and engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fracture and fatigue of thin crystalline SrTiO 3 membranes

The increasing availability of a variety of two-dimensional materials has generated enormous growth in the field of nanoengineering and nanomechanics. Recent developments in thin film synthesis have enabled the fabrication of freestanding functional oxide membranes that can be readily incorporated in nanomechanical devices. While many oxides are extremely brittle in bulk, recent studies have shown that, in thin membrane form, they can be much more robust to fracture as compared to their bulk counterparts. Here, we investigate the ultimate tensile strength of SrTiO 3 membranes by probing freestanding SrTiO 3 drumheads using an atomic force microscope. We demonstrate that SrTiO 3 membranes can withstand an elastic deformation with an average strain of ~6% in the sub-20 nm thickness regime, which is more than an order of magnitude beyond the bulk limit. Further, we also show that these membranes are highly resilient upon a high cycle fatigue test, surviving up to a billion cycles of force modulation at 85% of their fracture strain, demonstrating their high potential for use in nanomechanical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Machine learning approach to pattern recognition in nuclear dynamics from the ab initio symmetry-adapted no-core shell model

A novel machine learning approach is used to provide further insight into atomic nuclei and to detect orderly patterns amid a vast data of large-scale calculations. The method utilizes a neural network that is trained on ab initio results from the symmetry-adapted no-core shell model (SA-NCSM) for light nuclei. We show that the SA-NCSM, which expands ab initio applications up to medium-mass nuclei by using dominant symmetries of nuclear dynamics, can reach heavier nuclei when coupled with the machine learning approach. In particular, we find that a neural network trained on probability amplitudes for s- and p-shell nuclear wave functions not only predicts dominant configurations for heavier nuclei but in addition, when tested for the 20 Ne ground state, accurately reproduces the probability distribution. The non-negligible configurations predicted by the network provide an important input to the SA-NCSM for reducing ultralarge model spaces to manageable sizes that can be, in turn, utilized in SA-NCSM calculations to obtain accurate observables. The neural network is capable of describing nuclear deformation and is used to track the shape evolution along the 20-42 Mg isotopic chain, suggesting a shape coexistence that is more pronounced toward the very neutron-rich isotopes. We provide first descriptions of the structure and deformation of 24 Si and 40 Mg of interest to x-ray burst nucleosynthesis, and even of the extremely heavy nuclei such as 166,168 Er and 236 U, that build on first-principles considerations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Establishing the Maximum Collectivity in Highly Deformed N = Z Nuclei

The lifetimes of the first excited 2 + states in the N = Z nuclei 80 Zr, 78 Y, and 76 Sr have been measured using the γ-ray line shape method following population via nucleon-knockout reactions from intermediate-energy rare-isotope beams. The extracted reduced electromagnetic transition strengths yield new information on where the collectivity is maximized and provide evidence for a significant, and as yet unexplained, odd-odd vs even-even staggering in the observed values. As a result, the experimental results are analyzed in the context of state-of-the-art nuclear density-functional model calculations.

59 ≤ A ≤ 89↗
DOE OSTI2018

Functional Performances of CuZnAl Shape Memory Alloy Open-Cell Foams

Shape memory alloys (SMAs) with cellular structure offer a unique mixture of thermo-physical–mechanical properties. These characteristics can be tuned by changing the pore size and make the shape memory metallic foams very attractive for developing new devices for structural and functional applications. In this work, CuZnAl SMA foams were produced through the liquid infiltration of space holder method. In comparison, a conventional CuZn brass alloy was foamed trough the same method. Functional performances were studied on both bulk and foamed SMA specimens. Calorimetric response shows similar martensitic transformation (MT) below 0 °C. Compressive response of CuZnAl revealed that mechanical behavior is strongly affected by sample morphology and that damping capacity of metallic foam is increased above the MT temperatures. The shape memory effect was detected in the CuZnAl foams. The conventional brass shows a compressive response similar to that of the martensitic CuZnAl, in which plastic deformation accumulation occurs up to the cellular structure densification after few thermal cycles.

36 MATERIALS SCIENCE↗