Search NASA⌕ Search

SEARCH · Search NASA

Results for “fermentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Production of C5 Hydrocarbons from Water Biomass

The objective of this study was to demonstrate feasibility and scale-up of cellulosic feedstocks for the production of a commercial C 6 lactone. Visolis, Inc. has developed a fermentation platform for production of the lactone at high titers and yields. The lactone is used in high-end cosmetics industry and also serves as a valuable intermediate for production of biopolymers and biofuels. Strains employed by Visolis are capable of metabolizing both glucose and xylose, enabling full utilization of cellulosic hydrolysates as feedstock. Visolis and ABPDU conducted a 2L proof-of-concept fermentation campaign followed by a 50L scale-up campaign.

09 BIOMASS FUELS↗

Development of a Sustainable Green Chemistry Platform for Production of Acetone and Downstream Drop-in Fuel and Commodity Products Directly From Biomass Syngas Via a Novel Energy Conserving Route in Engineered Acetogenic Bacteria

LanzaTech and Oak Ridge National Laboratory have developed and scaled up a process for sustainable production of acetone and downstream drop-in fuel and commodity products directly from biomass syngas via a novel energy conserving route in engineered acetogenic bacteria. This process offers a safer and more environmentally-friendly production method for acetone production than the current phenol-dependent method, and the product has significantly lower GHG emissions. The developed process offers a cost competitive route to Acetone and enables biofuels at or below DOE’s $3 gge target. In addition, it also provides an attractive biological alternative to traditional sugar-based ABE fermentation, by enabling utilization of non-food biomass resources as fermentation feedstocks. Challenges overcome: • By-products formation: Byproduct 2,3-butandiol and 3-hydroxybutyrate reduce yield and stability. Addressed by elimination of both pathways in our chassis acetone production strain. • Cost competitiveness: Addressed by developing an integrated acetone strain and eliminating by-products to increase yield and stability. Optimized co-selectivity and coproductivity of acetone and ethanol instead of titer, based on technoeconomic analysis. • Limited enzyme variety: Addressed by genome mining of over 300 industrial strains in LanzaTech collection, identifying unique enzyme sequences, and refactoring these unique enzyme variants through LanzaTech’s engineering platform. Resulted in over 10x improvement in acetone production from gas. • Continuous process (stability): Identified bottleneck through detailed omics studies, addressed by integration of the acetone pathway on the chromosome. • Novel process to scale up: Addressed by demonstrating stable acetone production in a 80- L pilot reactor, with acetone productivity and selectivity comparable to those observed under the same conditions in 2-L reactors. We have demonstrated stable acetone production for over 7 days at commercial target rate and selectivity in 2-L reactors and have piloted the process.

09 BIOMASS FUELS↗

Extreme Expression of Cellulases in Poplar

Plant cell walls provide a vast, untapped source of sugars in the form of cellulose that can be fermented for the production of ethanol and other biofuels. However, there are several roadblocks to developing an economically viable cellulosic ethanol production process based on biochemical conversion, one of which is the cost of the enzymes required to change the cellulose to glucose. Historically, cellulase enzymes for digesting plant biomass have been produced and purified using bacteria. An alternative and potentially more economic approach is the production of the enzymes within the plant itself. The goal of this research was to verify a transgenic technology (In Plant Activation Technology – INPACT) in poplar which allows for the controlled high level accumulation of enzymes within the plant (Dugdale et al., 2013), and to assess the impact of the resulting cellulases on the efficiency of converting cellulose to fermentable sugars. INPACT is an inducible, gene amplification system which is unique in two ways. First, the INPACT gene cassette is designed so that the gene of interest is only transcribed in the presence of an initiation protein and as a result, no functional protein expression can occur without the initiation protein. Second, expression of the initiation protein is regulated by an inducible promoter such that INPACT acts as a switch to turn on high-level expression of proteins within the plant, and is particularly suited to proteins that may be toxic or hinder plant development as expression is tightly controlled by the INPACT trigger. The INPACT expression system combines the advantages of both stable and transient expression, and significantly, can be used to produce “difficult” proteins that cannot be expressed within the plant using conventional approaches.

09 BIOMASS FUELS↗

Development of a Sustainable Green Chemistry Platform for Production of Acetone and Downstream Drop-in Fuel and Commodity Products directly from Biomass Syngas via a Novel Energy Conserving Route in Engineered Acetogenic Bacteria

LanzaTech and Oak Ridge National Laboratory have developed and scaled up a process for sustainable production of acetone and downstream drop-in fuel and commodity products directly from biomass syngas via a novel energy conserving route in engineered acetogenic bacteria. This process offers a safer and more environmentally-friendly production method for acetone production than the current phenol-dependent method, and the product has significantly lower GHG emissions. The developed process offers a cost competitive route to Acetone and enables biofuels at or below DOE’s $3/gge target. In addition, it also provides an attractive biological alternative to traditional sugar-based ABE fermentation, by enabling utilization of non-food biomass resources as fermentation feedstocks. Challenges overcome: (1) By-products formation: Byproduct 2,3-butanediol and 3-hydroxybutyrate reduce yield and stability. Addressed by elimination of both pathways in the chassis acetone production strain. (2) Cost competitiveness: Addressed by developing an integrated acetone strain and eliminating by-products to increase yield and stability. Optimized co-selectivity and co-productivity of acetone and ethanol, based on technoeconomic analysis. (3) Limited enzyme variety: Addressed by genome mining of over 300 industrial strains in LanzaTech collection, identifying unique enzyme sequences, and refactoring these unique enzyme variants through LanzaTech’s engineering platform. Resulted in over 10x improvement in acetone production from gas. (4) Continuous process (stability): Identified bottleneck through detailed omics studies, addressed by integration of the acetone pathway on the chromosome. (5) Novel process to scale up: Addressed by demonstrating stable acetone production in an 80-L pilot reactor, with acetone productivity and selectivity comparable to those observed under the same conditions in 2-L reactors. LanzaTech has demonstrated stable acetone production for over 7 days at commercial target rate and selectivity in a 2-L reactor and have piloted the process.

09 BIOMASS FUELS↗

Identification and characterization of an oleaginous microalgal base strain for use in bio-based poly-urethane production

In collaboration with Checkerspot, Inc, researchers at ABPDU have successfully demonstrated production of algal lipids at high rate, titer, and yield in fed-batch fermentation. This technology enables high-intensity fermentation of sugars to algal oil, helping to reduce the cost of algal oils as a highly customizable feedstock for development of new bio-based polyurethanes.

59 BASIC BIOLOGICAL SCIENCES↗

Dissecting the Division of Labor in Microbial Consortia for the Production of Biofuels and Chemicals (Final Technical Report)

The overarching objective of this project is to elucidate the fundamental design rules for microbial division of labor (DOL), the core of ecosystem organization, in the context of artificial yeast—lactic acid bacteria consortia that produce advanced biofuel and chemical from cellulosic biomass. Over the course of four years, we have successfully achieved the objective through three lines of research that combines experiment with mathematical modeling. Specifically, we have shown that compositional and temporal DOL is effective in modulating mixed sugar fermentation by an engineered consortium and uncovered general quantitative criteria for conditions under which microbial DOL outperforms single superbugs for simultaneous utilization of mixed substrates. We also demonstrated, in synthetic consortia of yeast and lactic acid bacteria, that partitioning the labor for substrate breakdown and end-product synthesis can allow an efficient production of 2-butanol that is difficult otherwise for a single yeast strain. Additionally, by systematically probing the stability of an engineered cooperative consortium, we found that the stability of microbial symbiosis is governed by the topological structure of the underlying cellular interactions rather than specific microbial species and that rational modulation of the interactions may facilitate the restoration of collapsed consortia as well as the intervention of target communities. Together, this project has advanced the fundamental knowledge of microbial DOL in terms of its strength in mixed substrate fermentation, production of complex chemicals, and ecological system stability in the context of microbial consortia. It also provides valuable insights into the design, construction and optimization of artificial consortia for the utilization of cellulosic biomass and economic production of biofuel and chemicals.

59 BASIC BIOLOGICAL SCIENCES↗

Algal Biomass Conversion to Fuels via Combined Algae Processing (CAP): 2022 State of Technology and Future Research

The annual State of Technology (SOT) assessment is an essential activity for platform research conducted under the Bioenergy Technologies Office (BETO). It allows for the impact of research progress (both directly achieved in-house at NREL and furnished by partner organizations) to be quantified in terms of economic improvements in the overall biofuel production process for a particular biomass processing pathway, whether based on terrestrial or algal biomass feedstocks. As such, initial benchmarks can be established for currently demonstrated performance, and progress can be tracked toward out-year goals to ultimately demonstrate economically viable biofuel technologies. NREL's algae SOT benchmarking efforts focus both on front-end algal biomass production and separately on back-end conversion to fuels through NREL's "combined algae processing" (CAP) pathway. The production model is based on outdoor long-term cultivation data, enabled by comprehensive algal biomass production trials conducted under Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR) consortium efforts and driven by data furnished by Arizona State University's (ASU's) Arizona Center for Algae Technology and Innovation (AzCATI) test bed site. The CAP model is primarily based on experimental efforts conducted under NREL research and development projects, with some process parameters provided by partner organizations. Assumptions regarding the wet storage of algae use data provided by Idaho National Laboratory (INL), while parts of the polyurethane production process leverage BETO-funded research from collaborators at Algenesis and the University of California, San Diego (UCSD). This report focuses on back-end conversion of algal biomass through the CAP pathway, highlighting the 2022 updates to minimum fuel selling price (MFSP). This update incorporates improvements to fermentation performance for two biological pathways through carboxylic acid and 2,3-butanediol (BDO) intermediates, as demonstrated through parallel research on the biochemical conversion of corn stover. Improvements are applied to the glucose fraction of the biomass only, while parameters regarding the conversion of the mannose fraction (not a significant component in corn stover) are maintained consistently with prior CAP SOTs. Additional parameters are also updated to reflect the most current understanding of each pathway, including an increase in the catalyst loading requirement in the ketonization step of the acids pathway and a decrease in the fermentation productivity in the BDO pathway. Additionally, the biomass feedstock costs (minimum biomass selling price [MBSP]), yields, and seasonal variability from the upstream cultivation SOT model were also incorporated into downstream Aspen Plus CAP models.

09 BIOMASS FUELS↗

Challenges and Advances in Aqueous Processing of Corn Stover Pellets into High Concentration Slurries

Significant progress has occurred in developing combined enzyme hydrolysis and fermentation technologies for transforming lignocellulosic feedstocks into ethanol and other bioproducts. Various routes described in the literature show that low carbon footprint processes efficiently convert the cellulose and hemicellulose fractions of pretreated corn stover, wood chips, and sugarcane bagasse to sugars and to ethanol.Combinations of different pretreatments at high or low pH or in liquid hot water, followed by enzyme hydrolysis and fermentation or direct conversion of cellulose to ethanol (i.e., by consolidated bioprocessing)have been demonstrated. These successes have brought the need to preparing the feedstock – before it enters the biorefinery – into focus. This paper summarizes recent developments in liquefying corn stover,before pretreatment, so that slurries with yield stresses below 200 Pa are obtained and a “pumpable” corn stover slurry results at initial solids loadings of up to 300 g/L. The manner in which corn stover pellets are combined with water and enzyme in an agitated bioreactor is described, and properties that define slurry behavior are presented. Implications on biorefinery operations are explained in terms of particle properties and the preprocessing of corn stover as well as the team approach used to obtain these results.

Wassgren, Carl↗

Modeling of High Solids Biomass Liquefaction, Techno-economic Assessment and Life Cycle Assessment for Industrial Scale UP

Biomass liquefaction improves corn-stover slurry transport within a biorefinery, and reduces challenges associated with solids handling. Slurries, formed with yield stresses (i.e., viscosities) that are low enough to facilitate pumping from one unit operation to the next, and that enable mixing at reasonable power inputs in large fermentation vessels, enable scaling of cellulose fermentations. Three liquefaction methods: enzyme, enzyme mimetic, and a hybrid approach were analyzed by a combination of techno-economic and life-cycle analyses, resulting in an assessment of cost-effectiveness and environmental impact. Of the three scenarios, enzyme-based processes emerged as the most efficient, both in cost and emissions reduction (gCO2-equivalent/kg slurry).

Ramirez, Jorge↗

Acetate as a Platform for Carbon-Negative Production of Renewable Fuels and Chemicals (Final Technical Report)

This project was an industrial-academic collaboration between experts at the University of Wisconsin-Madison, the University of Kentucky, and LanzaTech, a world leader in the use of gas fermentation to sustainably produce fuels and chemicals. The project developed technologies to create an integrated process for converting carbon dioxide and renewable hydrogen into molecules that can be blended with liquid transportation fuels or used in an array of chemical applications. The project was motivated by the Program Objectives of eliminating carbon dioxide release in the production of chemicals by integrating the unique and efficient capabilities of two microorganisms into a single process. The first microbe, an acetogen, produces acetate from carbon dioxide and hydrogen while the second microbe upgrades acetate from acetogen fermentation permeates to higher-value chemical products. The carbon dioxide released in the upgrading process is recycled internally to produce more acetate. As such, the process can be designed to operate with zero carbon dioxide release and net positive carbon dioxide capture. The process has the potential to provide an alternative paradigm to the current bioeconomy – one in which acetate is the primary energy carrier instead of sugars. Our process by-passes photosynthesis and the barriers created by biomass as primary chemical feedstock. As such, the process can be scaled to meet existing sources of carbon dioxide emissions and located anywhere renewable hydrogen can be provided. Our work developed microorganisms with optimized metabolism for producing acetate and other microorganisms with improved conversion of acetate to dodecanol and dodecyl-acetate. We developed synthetic biology tools for a promising non-model bacterium that could enhance metabolic engineering efforts to convert acetate to chemical products. We conducted protein engineering studies to improve the activity of key enzymes involved in our metabolic pathways. We conducted a full technoeconomic analysis that set technical targets for each strain to meet economic goals. We identified key technical barriers in our process and proposed strategies to overcome them.

09 BIOMASS FUELS↗

Engineering Anti-Microbial Peptide Production in Fungi and Bioprocess Development (CRADA 502)

Crop Protection, specifically controlling agricultural diseases and pests, is essential for crop production at every agricultural scale. Biologics hold enormous potential in this equation to decrease use of more toxic pesticides. Currently, the widespread use of biologics in crop protection is severely hampered by the lack of available tools for their mass production. To ensure biologics are regulated under EPA Biopesticide regulations, the following must be true: The biopesticide is a naturally occurring substance or structurally similar and functionally identical to a naturally occurring substance with a history of exposure to humans and the environment demonstrating minimal toxicity. Since this pertains to the marketed product it is also essential that fermentation hosts have a history of exposure and safe use by humans This research focuses on developing a novel platform for the production and delivery of the cghSAMP peptide using the filamentous fungus Aspergillus niger. A. niger is a well-established industrial microorganism, widely recognized for its strong protein secretion capabilities, high-yield production of enzymes, and classification as a generally recognized as safe (GRAS) organism. By genetically modifying A. niger to express the cghSAMP peptide transgene, we aim to leverage the fungus's robust fermentation system to produce a high volume of the antimicrobial agent. This engineered system represents a potential breakthrough in sustainable disease management, offering an environmentally friendly method for localized application or large-scale production of a biopesticide designed to mitigate the effects of citrus greening disease. The main objectives of this project were: 1. Developing a high-yield and cost-efficient bioprocess to produce an AMP in a current ABF host or readily onboarded hosts. 2. Scale up the process in stirred tank reactors and produce at least 100 grams of AMP at 1- 5g/L

60 APPLIED LIFE SCIENCES↗

One Earth Energy CO 2 Capture Facility FEED Study and Class 4 Cost Estimate

The One Earth Energy (OEE) plant in Gibson City, Illinois produces ethanol through a corn fermentation process. For this project, the maximum possible ethanol production rate for this facility is 160 million gallons per year (MMgal/yr) based on discussions with plant personnel regarding recent annual production rates and any foreseeable plans or possibilities to increase ethanol production at this facility. Yeast ferments the corn mash to produce ethanol and produces carbon dioxide (CO 2 ) as a by-product at the same time. The CO 2 bubbles out of the mash and flows through a packed bed water scrubber to remove volatile organic compounds before the gas vents to atmosphere. CO 2 will be captured after it has passed through the existing scrubber.

09 BIOMASS FUELS↗

Engineering Synthetic Anaerobic Consortia Inspired by the Rumen for Biomass Breakdown and Conversion

Lignocellulosic plant biomass is a widely-abundant renewable resource that can be harnessed for value-added production of fuels & chemicals. While microbes have been engineered to breakdown lignocellulose and turn released sugars into products, this remains an energy-intensive process that requires expensive pre-treatment and separation steps. Furthermore, it is difficult to engineer all desirable traits for breakdown and conversion into one organism. This project developed a new strategy that relies on microbial partnerships formed in the herbivore rumen to liberate sugars from crude plant biomass and convert that sugar to value-added chemicals. Microbial consortia consisting of fungi, bacteria, and archaea form tight associations in the herbivore rumen, which divide-and-conquer the difficult tasks of biomass breakdown. This project leveraged a “synthetic rumen” consortium composed of anaerobic fungi and chain-elongating bacteria to study which metabolites are shared and exchanged between microbes and identify strategies to bolster lignocellulose conversion to value-added products. Our approach developed high-throughput systems and synthetic biology approaches to realize stable synthetic consortia that route lignocellulosic carbon into short and medium chain fatty acids (SCFAs/MCFAs) rather than methane. Key research objectives were to (1) design and predict anaerobic fungal and bacterial consortia that efficiently convert lignocellulosic biomass into medium-chain fatty acids (MCFAs), (2) understand how fermentation parameters and microbe-microbe interactions regulate and drive microbiome metabolic fluxes, and (3) use genomic editing to alter the fermentation byproducts of anaerobic fungi and bolster MCFA titers and yields.

09 BIOMASS FUELS↗

Final Report: DOE/ID/14215

The proposed straw separation system developed in the research project harvests the large internode sections of the straw which has the greater potential as a feedstock for lignocellulosic ethanol production while leaving the chaff and nodes in the field. This strategy ensures sustainable agriculture by preventing the depletion of soil minerals, and it restores organic matter to the soil in amounts and particle sizes that accommodate farmers’ needs to keep tillage and fertilizer costs low. A ton of these nutrient-rich plant tissues contains as much as $10.55 worth of fertilizer (economic and energy benefits), in terms of nitrogen, phosphorus, potassium, and other nutrients provided to the soil when incorporated by tillage instead of being burned. Biomass conversion to fermentable sugars for the purpose of producing fuels, chemicals, and other industrial products is well understood. Most bioenergy strategies rely on low-cost fermentable sugars for sustainability and economic viability in the marketplace. Exploitation of the “whole crop”—specifically, wheat straw or other plant material currently regarded as residue or waste—is a practical approach for obtaining a reliable and low-cost source of sugars. However, industrial-scale production of sugars from wheat straw, while technically feasible, is plagued by obstacles related to capital costs, energy consumption, waste streams, production logistics, and the quality of the biomass feedstock. Currently available separation options with combine harvesters are not able to achieve sufficient separation of the straw/stover and chaff streams to realize the full potential of selective harvest. Since ethanol yield is a function of feedstock structural carbohydrate content, biomass anatomical fractions of higher product yield can have a significant beneficial impact on minimum ethanol selling price. To address this advanced biomass separation computation engineering models were developed to more effectively and efficiently engineer high-fidelity and high throughput separation systems for biomass components. INL and Iowa State University developed a computational modeling strategy for simulating multi-phase flow with an integrated solver using various computational fluid dynamics (CFD) codes. ISU set up a classic multi-phase test problem to be solved by the various CFD codes. The benchmark case was based on experimental data for bubble gas holdup and bed expansion for a gas/solid fluidized bed. Preliminary fluidization experiments identified some unexpected fluidization behavior, where rather than the bed uniformly fluidizing, a “blow out” would occur where a hole would open up in the bed through which the air would preferentially flow, resulting in erratic fluidization. To improve understanding of this phenomena and aid in building a design tool, improved computational tools were developed. The virtual engineering techniques developed were tested and utilized to design a separation baffle in a CNH combine. A computational engineering approach involving modeling, analysis, and simulation was used in the form of virtual engineering to design a baffle separator capable of accomplishing the high-fidelity residue separation established by the performance targets. Through the use of the virtual engineering model, baffle designs were simulated to (1) determine the effect of the baffle on the airflow of the combine cleaning system, and (2) predict the effectiveness of the baffle in separating the residue streams. A baffle design was selected based on the virtual engineering modeling, built into the INL selective harvest test combine. The result of the baffle changes improved the crop separation capability of the combine, enabling downstream improvement in composition and theoretical ethanol yield. In addition, the positive results from the application of the virtual engineering tools to the CNH combine design resulted in further application of these tools to other INL areas of research. INL and the University of Idaho identified, characterized, and modified a key plant biosynthetic lignin gene, cinnamoyl CoA reductase (CCR), to assess its influence on the efficiency with which the resulting biomaterials interact with and are processed by engineering systems. The characterization of CCR genes and resulting antisense gene constructs enabled the modification and assessment of the impact of cell wall biosynthetic gene in wheat. This allows the model systems needed to study the structural and functional post-harvest properties of straw to be created and assessed. Progress was made toward identifying and using key CCR lignin biosynthesis gene sequences for controlling lignin biosynthesis with the goal of altering lignin content and composition in wheat. This was important because of the potential impact that reduced lignin could have on feedstock harvesting, transportation, storage, pretreatment, and processing.

09 BIOMASS FUELS↗

Syntrophic Degradation of Lactate in Methanogenic Co-cultures

In environments where the amount of the inorganic electron acceptors (oxygen, nitrate, sulfate, sulfur oroxidized metal ions (Fe3+;Mn4+) is insufficient for complete breakdown of organic matter, methane is formed as the major reduced end product. In such methanogenic environments organic acids are degraded by syntrophic associations of fermenting, acetogenic bacteria (e.g., sulfate-reducing bacteria (SRB) as"secondary fermenters") and methanogenic archaea. In these consortia, the conversion of lactate to acetate, CO2 and methane depends on the cooperating activities of both metabolically distinct microbial groups that are tightly linked by the need to maintain the exchanged metabolites (hydrogenandformate) at very low concentrations.

54 ENVIRONMENTAL SCIENCES↗

KBase Narrative - Porphyromonadaceae sp. W3.11 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗

KBase Narrative - Lachnospiraceae sp. C1.1 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗

Succinate Overproduction: A Case Study of Computational Strain Design Using a Comprehensive Escherichia coli Kinetic Model

Computational strain-design prediction accuracy has been the focus for many recent efforts through the selective integration of kinetic information into metabolic models. In general, kinetic model prediction quality is determined by the range and scope of genetic and/or environmental perturbations used during parameterization. Here, we apply the k-OptForce procedure on a kinetic model of E. coli core metabolism constructed using the Ensemble Modeling (EM) method and parameterized using multiple mutant strains data under aerobic respiration with glucose as the carbon source. Minimal interventions are identified that improve succinate yield under both aerobic and anaerobic conditions to test the fidelity of model predictions under both genetic and environmental perturbations. Under aerobic condition, k-OptForce identifies interventions that match existing experimental strategies while pointing at a number of unexplored flux re-directions such as routing glyoxylate flux through the glycerate metabolism to improve succinate yield. Many of the identified interventions rely on the kinetic descriptions that would not be discoverable by a purely stoichiometric description. In contrast, under fermentative (anaerobic) condition, k-OptForce fails to identify key interventions including up-regulation of anaplerotic reactions and elimination of competitive fermentative products. This is due to the fact that the pathways activated under anaerobic condition were not properly parameterized as only aerobic flux data were used in the model construction. This study shed light on the importance of condition-specific model parameterization and provides insight on how to augment kinetic models so as to correctly respond to multiple environmental perturbations.

59 BASIC BIOLOGICAL SCIENCES↗