Search NASA⌕ Search

SEARCH · Search NASA

Results for “interfacial structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Superlattice structure including two-dimensional material and device including the superlattice structure

Provided are a superlattice structure including a two-dimensional material and a device including the superlattice structure. The superlattice structure may include at least two different two-dimensional (2D) materials bonded to each other in a lateral direction, and an interfacial region of the at least two 2D materials may be strained. The superlattice structure may have a bandgap adjusted by the interfacial region that is strained. The at least two 2D materials may include first and second 2D materials. The first 2D material may have a first bandgap in an intrinsic state thereof. The second 2D material may have a second bandgap in an intrinsic state thereof. An interfacial region of the first and second 2D materials and an adjacent region may have a third bandgap between the first bandgap and the second bandgap.

Lee, Minhyun↗

Unified descriptor for enhanced critical heat flux during pool boiling of hemi-wicking surfaces

Boiling heat transfer is dictated by interfacial phenomena at the three-phase contact line where vapor bubbles form on the surface. Structured surfaces have shown significant enhancement in critical heat flux (CHF) during pool boiling by tailoring interfacial phenomena. This CHF enhancement has been primarily explained by two structural effects: roughness, which extends the contact line length at the bubble base, and wickability, the ability to imbibe liquid through surface structures by capillary pumping. Here, in this work, we show that CHF enhancement on structured surfaces cannot be described by roughness or wickability alone. This result was confirmed using systematically designed micropillar surfaces with controlled roughness and wickability. Further, we performed a scaling analysis and derived a unified descriptor, which represents the combined effects of thin film density and volumetric wicking rate. This unified descriptor shows a reasonable correlation with CHF values with our experiments and literature data. This work provides important insights in understanding the role of surface structures on CHF enhancement, thereby providing guidelines for the systematic design of surface structures for enhanced pool boiling heat transfer.

42 ENGINEERING↗

Enhancing ion transport in charged block copolymers by stabilizing low symmetry morphology: Electrostatic control of interfaces

Recently, the interest in charged polymers has been rapidly growing due to their uses in energy storage and transfer devices. Yet, polymer electrolyte-based devices are not on the immediate horizon because of the low ionic conductivity. In the present study, we developed a methodology to enhance the ionic conductivity of charged block copolymers comprising ionic liquids through the electrostatic control of the interfacial layers. Unprecedented reentrant phase transitions between lamellar and A15 structures were seen, which cannot be explained by well-established thermodynamic factors. X-ray scattering experiments and molecular dynamics simulations revealed the formation of fascinating, thin ionic shell layers composed of ionic complexes. The ionic liquid cations of these complexes predominantly presented near the micellar interfaces if they had strong binding affinity with the charged polymer chains. Therefore, the interfacial properties and concentration fluctuations of the A15 structures were crucially dependent on the type of tethered acid groups in the polymers. Overall, the stabilization energies of the A15 structures were greater when enriched, attractive electrostatic interactions were present at the micellar interfaces. Contrary to the conventional wisdom that block copolymer interfaces act as “dead zone” to significantly deteriorate ion transport, this study establishes a prospective avenue for advanced polymer electrolyte having tailor-made interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

N and OH-Immobilized Cu 3 Clusters In Situ Reconstructed from Single-Metal Sites for Efficient CO 2 Electromethanation in Bicontinuous Mesochannels

Cu-based catalysts hold promise for electrifying CO 2 to produce methane, an extensively used fuel. However, the activity and selectivity remain insufficient due to the lack of catalyst design principles to steer complex CO 2 reduction pathways. Herein, we develop a concept to design carbon-supported Cu catalysts by regulating Cu active sites’ atomic-scale structures and engineering the carbon support’s mesoscale architecture. This aims to provide a favorable local reaction microenvironment for a selective CO 2 reduction pathway to methane. In situ X-ray absorption and Raman spectroscopy analyses reveal the dynamic reconstruction of nitrogen and hydroxyl-immobilized Cu 3 (N,OH-Cu 3 ) clusters derived from atomically dispersed Cu–N 3 sites under realistic CO 2 reduction conditions. The N,OH-Cu 3 sites possess moderate *CO adsorption affinity and a low barrier for *CO hydrogenation, enabling intrinsically selective CO 2 -to-CH 4 reduction compared to the C–C coupling with a high energy barrier. Importantly, a block copolymer-derived carbon fiber support with interconnected mesopores is constructed. The unique long-range mesochannels offer an H 2 O-deficient microenvironment and prolong the transport path for the CO intermediate, which could suppress the hydrogen evolution reaction and favor deep CO 2 reduction toward methane formation. Thus, the newly developed catalyst consisting of in situ constructed N,OH-Cu 3 active sites embedded into bicontinuous carbon mesochannels achieved an unprecedented Faradaic efficiency of 74.2% for the CO 2 reduction to methane at an industry-level current density of 300 mA cm –2 . In conclusion, this work explores effective concepts for steering desirable reaction pathways in complex interfacial catalytic systems via modulating active site structures at the atomic level and engineering pore architectures of supports on the mesoscale to create favorable microenvironments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial chemical reaction and multiple gap state formation on three layer cathode in organic light-emitting diode: Ca/BaF{sub 2}/Alq{sub 3}

A three layer cathode is a promising stack structure for long lifetime and high efficiency in organic light-emitting diodes. The interfacial chemical reactions and their effects on electronic structures for alkaline-earth metal (Ca, Ba)/Alq{sub 3} [tris(8-hydroxyquinolinato)aluminum] and Ca/BaF{sub 2}/Alq{sub 3} are investigated using in-situ X-ray and ultraviolet photoelectron spectroscopy, as well as molecular model calculation. The BaF{sub 2} interlayer initially prevents direct contact between Alq{sub 3} and the reactive Ca metal, but it is dissociated into Ba and CaF{sub 2} by the addition of Ca. As the Ca thickness increases, the Ca penetrates the interlayer to directly participate in the reaction with the underlying Alq{sub 3}. This series of chemical reactions takes place irrespective of the BaF{sub 2} buffer layer thickness as long as the Ca overlayer thickness is sufficient. The interface reaction between the alkaline-earth metal and Alq{sub 3} generates two energetically separated gap states in a sequential manner. This phenomenon is explained by step-by-step charge transfer from the alkaline-earth metal to the lowest unoccupied molecular orbital states of Alq{sub 3}, forming new occupied states below the Fermi level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-Assembly Interactions in Magnetite-Coated Cellulose Nanocrystals: Implications for Magnetic Hyperthermia Applications

Magnetic cellulose nanocrystal (MCNC) nanocomposites are promising sustainable and biocompatible platforms for magnetic hyperthermia; however, the molecular mechanisms governing Fe 3 O 4 adsorption and deposition onto CNCs remain poorly understood. Here, sulfated (S-CNC) and TEMPO-oxidized CNCs (T-CNC) were used to prepare nanocomposites at 1:2 and 1:4 CNC:Fe 3 O 4 mass ratios, enabling a systematic evaluation of how surface chemistry and nanoparticle loading dictate interfacial interactions and magneto-colloidal behavior. Bare magnetite nanoparticles were 21 ± 5 nm by TEM but grew to 144 ± 18 in the DLS measurement at pH 7. The S-CNC nanocomposites had hydrodynamic sizes between 144 and 210 nm, not much larger than the 140 nm long CNC rods, suggesting an enhanced dispersion stability compared to Fe3O4 alone. X-ray photoelectron spectroscopy combined with density functional theory revealed that −OH and −COOH groups drive electrostatic adsorption with charge transfer from Fe 3 O 4 to the CNC surface, while T-CNCs showed more favorable adsorption energies and evidence of covalent Fe−O bonding. Vibrating sample magnetometry demonstrated superparamagnetic behavior for all samples, with S-CNC/Fe 3 O 4 1:4 and 1:2 displaying saturation magnetizations of 78 and 77 emu/g-Fe 3 O 4 , close to the 83 emu/g of bare magnetite. The T-CNC composites showed lower (60 and 66 emu/g-Fe3O4) saturation magnetizations. Zero-field-cooled/field-cooled measurements resulted in a blocking temperature of 112 K for all samples, except T-CNC/Fe 3 O 4 1:2 (100 K). Magnetic hyperthermia studies revealed that specific absorption rate (SAR) increased with field strength and Fe 3 O 4 content; however, S-CNC/Fe 3 O 4 (1:2) achieved the highest intrinsic SAR per gram of Fe 3 O 4 (649 W/g-Fe 3 O 4 ) likely due to its anisotropy and fast magnetic relaxation. Cytotoxicity assays confirmed that all nanocomposites were nontoxic toward mammalian cells. These results establish quantitative structure−property relationships between CNC surface chemistry, interfacial bonding mechanisms, and magnetic heating performance, providing a foundation for rational design of biocompatible magnetic nanocomposites for hyperthermia and related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Grafting nanometer metal/oxide interface towards enhanced low-temperature acetylene semi-hydrogenation

Metal/oxide interface is of fundamental significance to heterogeneous catalysis because the seemingly “inert” oxide support can modulate the morphology, atomic and electronic structures of the metal catalyst through the interface. The interfacial effects are well studied over a bulk oxide support but remain elusive for nanometer-sized systems like clusters, arising from the challenges associated with chemical synthesis and structural elucidation of such hybrid clusters. We hereby demonstrate the essential catalytic roles of a nanometer metal/oxide interface constructed by a hybrid Pd/Bi 2 O 3 cluster ensemble, which is fabricated by a facile stepwise photochemical method. The Pd/Bi 2 O 3 cluster, of which the hybrid structure is elucidated by combined electron microscopy and microanalysis, features a small Pd-Pd coordination number and more importantly a Pd-Bi spatial correlation ascribed to the heterografting between Pd and Bi terminated Bi 2 O 3 clusters. The intra-cluster electron transfer towards Pd across the as-formed nanometer metal/oxide interface significantly weakens the ethylene adsorption without compromising the hydrogen activation. As a result, a 91% selectivity of ethylene and 90% conversion of acetylene can be achieved in a front-end hydrogenation process with a temperature as low as 44 °C.

36 MATERIALS SCIENCE↗

Phase-field modeling of stacking structure formation and transition of δ-hydride precipitates in zirconium

d-hydride structures in Zr nuclear fuel-rod cladding significantly affect mechanical properties. In this work, a micromechanical phase-field model is developed to investigate the effect of interfacial energy anisotropy and elastic interaction on the nucleation, stacking structure formation, and stacking structure transition of d-hydride precipitates. It is found that the nucleation probability and growth of d-hydride near pre-existing hydrides are strongly spatially dependent. Results show that (1) the d-hydride precipitate has a platelet-like shape. The large shear deformation associated with lattice mismatches and a small interfacial energy of its broad interface cause the orientation of the plate-like d-hydride off the basal plane a small angle of approximately 14.7°. (2) Stress-induced nucleation of d-hydride precipitates near a pre-existing hydride results in the unique stacking structure formation of d-hydride precipitates. (3) The morphology and alignment of hydride stacking structures, called as macroscopic hydrides which consist of microscopic hydrides with certain stacking sequences, change under stresses. The alignment of macroscopic hydrides changes from along the circumferential direction to along the radial direction under tensile hoop stress while the orientation of microscopic hydrides remains parallel to the basal plane. These results are in agreement with experimental observations. The simulations reveal that stress-induced heterogeneous nucleation and growth is the mechanism for the formation and transition of unique macro-hydride stacking structures observed in in Zr nuclear fuel-rod cladding.

Han, G. M.↗

Carbon quantum dots interfacial modified graphene/silicon Schottky barrier solar cell

The two-dimensional thin film, as an effective interface modification layer to improve the power conversion efficiency (PCE) of graphene/silicon (Gr/Si) heterojunction solar cells has attracted extensive attention recently. However, the complicated manufacturing process and specialized equipment requirements impede its broad application. Herein, carbon quantum dots (CQDs) fabricated under the mild reaction condition was first time used to modify Gr/Si devices interface structure. The effects of CQDs size distributions and coating thickness on J-V characteristics and the energy band structure of Gr/CQDs/Si solar cells were systematically analyzed. The findings indicate that the PCE of resulting Gr/CQDs/Si solar cells could reach 9.97% when the thickness and sizes of CQDs interlayer are ~26 nm and 4–7 nm, without any chemical doping, which is 6.8-times PCE than that of virgin Gr/Si solar cells. The CQDs interlayer serves as both an electron blocking layer and hole transport layer to reduce the carrier recombination, leading to a lower reverse saturation current as well as a larger VOC then improved the device performance. The enhanced PCE shows that the CQDs species have the potential applications in a cost-effective photovoltaic device.

14 SOLAR ENERGY↗

Direct observation of interfacial reaction of Ni/6H-SiC and carbon redistribution by in situ transmission electron microscopy

Highlights: • Interfacial reaction mechanism for Ni/SiC at 550 °C is investigated in situ by TEM. • NBED, EDS and EELS analyses were performed to identify the phases formed. • Carbon atoms from decomposed SiC were redistributed in three different regions. • Graphite/Ni{sub 31}Si{sub 12}/Ni{sub 31}Si{sub 12} + graphite/6H-SiC structure was observed after the reaction. - Abstract: The interfacial reaction of Ni/SiC has been attracting considerable attention because SiC substrate has excellent chemical and thermal stability and low electrical resistivity, which are essential properties for various device applications. However, research on the initial reaction at low temperature and exact mechanism is currently insufficient. Therefore, we investigated the reaction of Ni films on a 6H-SiC substrate and the behavior of carbon at 550 °C by direct observation with transmission electron microscopy (TEM) during in situ heating. At 550 °C, the Ni{sub 31}Si{sub 12} phase formed during the reaction of Ni and SiC. The Ni silicide layer thickened as the reaction front proceeded toward the 6H-SiC substrate and carbon atoms from decomposed SiC converted into graphite. In addition, carbon existed in three regions. First, carbon existed as graphite on the external surface of Ni silicide layer during initial reaction. Second, graphite formed at the original interface between the Ni film and the 6H-SiC substrate. Finally, carbon existed at the bottom of the Ni silicide region due to its low diffusivity in the silicide. The elemental distribution of Ni, Si, and C was observed in detail through various analytical techniques. We demonstrate the reaction mechanism of Ni and SiC at 550 °C and the distribution of carbon atoms.

36 MATERIALS SCIENCE↗

Interfacial Reactivity-Triggered Oscillatory Lattice Strains of Nanoalloys

Understanding the structure evolution of nanoalloys under reaction conditions is vital to the design of active and durable catalysts. Herein, we report an operando measurement of the dynamic lattice strains of dual-noble-metal alloyed with an earth-abundant metal as a model electrocatalyst in a working proton-exchange membrane fuel cell using synchrotron high-energy X-ray diffraction coupled with pair distribution function analysis. Additionally, the results reveal an interfacial reaction-triggered oscillatory lattice strain in the alloy nanoparticles upon surface dealloying. Analysis of the lattice strains with an apparent oscillatory irregularity in terms of frequency and amplitude using time-frequency domain transformation and theoretical calculation reveals its origin from a metal atom vacancy diffusion pathway to facilitate realloying upon dealloying. This process, coupled with surface metal partial oxidation, constitutes a key factor for the nanoalloy's durability under the electrocatalytic oxygen reduction reaction condition, which serves as a new guiding principle for engineering durable or self-healable electrocatalysts for sustainable fuel cell energy conversion.

Wu, Zhi-Peng [State University of New York (SUNY),↗

Molecular polarizabilities as fingerprints of perturbations to water by ions and confinement

Perturbations to water, both by ions and confining media, have been the focus of numerous experimental and theoretical studies. Yet, several open questions remain, including the extent to which such perturbations modify the structural and dielectric properties of the liquid. Here, we present a first-principles molecular dynamics study of alkali cations in water (Li + , Na + , and K + ) as well as of water and LiCl and KCl solutions under confinement within carbon nanotubes (CNTs) of small diameter (1.1-1.5 nm). Our simulations support the view that the water structure is only modified locally in the presence of cations. We found that molecular polarizabilities are fingerprints of hydrogen bonding modifications, which occur at most up to the second solvation shell for all cations in bulk water. Under confinement, we found that the overall value of the molecular polarizability of water molecules near the surface is determined by the balance of two effects, which are quantitatively different in CNTs of different radii: the presence of broken hydrogen bonds at the surface leads to a decrease in the polarizabilities of water molecules, while the interaction with the CNT enhances polarizabilities. Interestingly, the reduction in dipole moments of interfacial water molecules under confinement is instead driven only by changes in the water structure and not by interfacial interactions. As expected, confinement effects on water molecular polarizabilities and dipole moments are more pronounced in the case of the 1.1 nm CNT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative protein structural dynamics of homodimeric hemoglobin linked to water cluster at subunit interface revealed by time-resolved X-ray solution scattering

Homodimeric hemoglobin (HbI) consisting of two subunits is a good model system for investigating the allosteric structural transition as it exhibits cooperativity in ligand binding. In this work, as an effort to extend our previous study on wild-type and F97Y mutant HbI, we investigate structural dynamics of a mutant HbI in solution to examine the role of well-organized interfacial water cluster, which has been known to mediate intersubunit communication in HbI. In the T72V mutant of HbI, the interfacial water cluster in the T state is perturbed due to the lack of Thr72, resulting in two less interfacial water molecules than in wild-type HbI. By performing picosecond time-resolved X-ray solution scattering experiment and kinetic analysis on the T72V mutant, we identify three structurally distinct intermediates (I 1 , I 2 , and I 3 ) and show that the kinetics of the T72V mutant are well described by the same kinetic model used for wild-type and F97Y HbI, which involves biphasic kinetics, geminate recombination, and bimolecular CO recombination. The optimized kinetic model shows that the R-T transition and bimolecular CO recombination are faster in the T72V mutant than in the wild type. From structural analysis using species-associated difference scattering curves for the intermediates, we find that the T-like deoxy I 3 intermediate in solution has a different structure from deoxy HbI in crystal. In addition, we extract detailed structural parameters of the intermediates such as E-F distance, intersubunit rotation angle, and heme-heme distance. By comparing the structures of protein intermediates in wild-type HbI and the T72V mutant, we reveal how the perturbation in the interfacial water cluster affects the kinetics and structures of reaction intermediates of HbI.

59 BASIC BIOLOGICAL SCIENCES↗

Slow Organic-to-Inorganic Sub-Lattice Thermalization in Methylammonium Lead Halide Perovskites Observed by Ultrafast Photoluminescence

We examine carrier dynamics in polycrystalline methylammonium lead iodide (CH3NH3PbI3) perovskite thin films as functions of temperature and excitation wavelength. At room temperature, long-lived (nanosecond) transient absorption signals indicate negligible carrier trapping. Conversely, in ultrafast photoluminescence, we observe a heretofore unreported large amplitude (50-60%), 45-ps decay process prior to slower recombination. This fast feature persists for temperatures down to the orthorhombic phase transition near 150 K, below which phase coexistence manifests as rapid energy transfer between domains. At 3 K, a transient photoluminescence red-shift indicates formation of bound excitons from photogenerated free carriers with a 16 meV binding energy for the orthorhombic phase. Finally, we show that the fast PL decay component depends on pump photon energy, which we suggest relates excitation of high energy phonon modes associated with the organic component that alters wavefunction overlap. High-level electronic structure and dynamics calculation support the experimental findings. Hence, the fast PL decay relates a characteristic organic-to-inorganic sub-lattice equilibration timescale at optoelectronic-relevant excitation energies.

Chang, Angela Y.↗

Effect of Li Promoter on titania-supported Rh catalyst for ethanol formation from CO hydrogenation

The addition of 0.10wt% Li to Rh/TiO2 more than doubled the CO conversion for CO hydrogenation while increasing ethanol selectivity. The addition of Li also increases formation of C2 oxygenates at the expense of C1 species, methanol and methane. This is attributed to enhanced dispersion of Rh by Li that appears to reduce dissociation of CO, which previous studies have shown requires large ensembles of Rh atoms on the surface. Li promotion appears to increase the associatively adsorbed CO, allowing for increased H2 chemisorption on the surface compared to the dissociative adsorption of the same number of CO atoms. This increases selectivity to ethanol compared to the unpromoted catalysts. CO-TPD shows more reactive adsorbed CO species on the Li-promoted catalyst. FTIR results suggest that Li promotion alters CO bonding at bridged or interfacial sites and its effect is more structural than electronic.

03 NATURAL GAS↗

Insights into enhanced sodium ion storage mechanism in Fe 3 S 4 : The coupling of surface chemistry, microstructural regulation and 3D electronic transport

Sodium ion batteries (SIBs) are considered a potential energy storage technology due to their low cost and the abundance of sodium resources. Numerous strategies have been made to address the remaining challenges such as low electronic conductivity, huge volume change, and sluggish sodium ions kinetics. In spite of impressive advances, a comprehensive understanding of the microstructure-stability correlation remains elusive. Here, the three-dimensional (3D) Fe 3 S 4 flower-like hierarchical materials constructed from two-dimensional (2D) nanosheet building units were synthesized via a facile and cost-effective method. Instead of materials synthesis and performance evaluation, more attentions have been paid on the underlying coupling mechanism between microstructure design, surface chemistry and 3D electronic/ionic transport pathways. It found that the thin and stable SEI layer generated by ether-based electrolytes contributes to the stable surface chemistry and fast interfacial Na + ion transport, while 3D hierarchical structure enables short diffusion distance, volume change accomodation as well as stabilizing SEI layer. Taking advantage of the inherent high electronic conductivity in Fe 3 S 4 , we have demonstrated the paramount importance of the synergistic strategy to improve the stability of SIBs through X-ray nanotomography. In conclusion, this work explicitly illuminate the electrochemical stability mechanisms of 3D hierarchitectures and resolves new strategies to rational design SIBs anodes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Gearbox of the Bacterial Flagellar Motor Switch

Switching of flagellar motor rotation sense dictates bacterial chemotaxis. Multi-subunit FliM-FliG rotor rings couple signal protein binding in FliM with reversal of a distant FliG C-terminal (FliGC) helix involved in stator contacts. Subunit dynamics were examined in conformer ensembles generated by molecular simulations from the X-ray structures. Principal component analysis extracted collective motions. Interfacial loop immobilization by complex formation coupled elastic fluctuations of the FliM middle (FliMM) and FliG middle (FliGM) domains. Coevolved mutations captured interfacial dynamics as well as contacts. FliGM rotation was amplified via two central hinges to the FliGC helix. Intrinsic flexibility, reported by the FliGMC ensembles, reconciled conformers with opposite FliGC helix orientations. FliG domain stacking deformed the inter-domain linker and reduced flexibility; but conformational changes were not triggered by engineered linker deletions that cause a rotation-locked phenotype. These facts suggest that binary rotation states arise from conformational selection by stacking interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Adsorption of Mixed Micelles of Polysorbate 80 and Oleic Acid to the Air–Water Interface

The solubilization of long chain amphiphiles with limited solubility into mixed micelles composed of highly soluble surfactants plays a crucial role in modulating the stability and functionality of formulations in pharmaceutical and food systems. Subsequently, the mixed micelles adsorb from solution to the air−water surface, defining the transport mechanism of the insoluble amphiphiles to the interface. We use X-ray reflectivity to measure the composition and provide insight into the structure of these mixed monolayers, and, alongside interfacial tension measurements, we provide an understanding of how the bulk composition determines the surface composition and the dynamics of tension reduction. We use a model system consisting of an insoluble fatty acid, oleic acid (OA), and a soluble micelle-forming surfactant, polysorbate 80 (PS80). PS80 forms spherical micelles, and, above the critical micelle concentration (cmc), OA is readily solubilized inside the micelles. We show that the adsorption of PS80/OA mixed micelles to the air−water interface rapidly reduces the tension and lowers the equilibrium tension in proportion to the OA concentration. X-ray reflectivity data, fit using Parratt-slab models, quantitively demonstrates that the monolayers become enriched with OA, and we show how the OA intercalates into the PS80 monolayers.

36 MATERIALS SCIENCE↗