Search NASA⌕ Search

SEARCH · Search NASA

Results for “interval analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Enlarged Nonclosure of Surface Energy Balance With Increasing Atmospheric Instabilities Linked to Changes in Coherent Structures

The nonclosure of surface energy balance remains an outstanding problem in eddy covariance (EC) measurements of land-surface fluxes of heat, water vapor, and CO 2 . Our data collected from an EC tower over a semiarid sagebrush ecosystem indicate that under unstable atmospheric conditions, the nonclosure becomes increased with increasing instability, consistent with many other studies. It is demonstrated that the increased nonclosure is not caused by the inadequate sampling of large-scale turbulent motions using a 30-min averaging interval, though the scales of turbulent motions dominating sensible and latent heat fluxes become enlarged with increasing instability. Quadrant analysis is then used to reveal that the flux contributions from ejections remain nearly constant with increasing instability, whereas the flux contributions from sweeps are reduced and their time fractions increase. Our results imply that the increased nonclosure of surface energy balance is associated with changes in turbulent structures including their dominant time scales and flux contributions of ejections and sweeps as the atmospheric instability increases, which require further studies using vertically distributed observations and/or large eddy simulations.

54 ENVIRONMENTAL SCIENCES↗

ACCRETION TORQUES AND MOTION OF THE HOT SPOT ON THE ACCRETING MILLISECOND PULSAR XTE J1807-294

We present a coherent timing analysis of the 2003 outburst of the accreting millisecond pulsar (AMXP) XTE J1807-294. We find a 95% confidence interval for the pulse frequency derivative of (+0.7, + 4.7) x 10{sup -14} Hz s{sup -1} and (-0.6, + 3.8) x 10{sup -14} Hz s{sup -1} for the fundamental and second harmonics, respectively. The sinusoidal fractional amplitudes of the pulsations are the highest observed among AMXPs and can reach values of up to 27% (2.5-30 keV). The pulse arrival time residuals of the fundamental frequency follow a linear anti-correlation with the fractional amplitudes that suggests hot spot motion both in longitude and latitude over the surface of the neutron star. An anti-correlation between residuals and X-ray flux suggests an influence of the accretion rate on pulse phase and casts doubts on the interpretation of pulse frequency derivatives in terms of changes of spin rates and torques on the neutron star.

79 ASTRONOMY AND ASTROPHYSICS↗

Kaon and pion femtoscopy at the highest energies available at the BNL Relativistic Heavy Ion Collider (RHIC) in a hydrokinetic model

The hydrokinetic approach that incorporates hydrodynamic expansion of the systems formed in A+A collisions and their dynamical decoupling is applied to restore the initial conditions and space-time picture of the matter evolution in central Au+Au collisions at the top Relativistic Heavy Ion Collider energy. The analysis is based on the detailed reproduction of the pion and kaon momentum spectra and femtoscopic data in whole interval of the transverse momenta studied by both the STAR and the PHENIX collaborations. The fitting procedure utilizes the two parameters: the maximal energy density at supposed thermalization time 1 fm/c and the strength of the prethermal flows developed to this time. The quark-gluon plasma and hadronic gas is supposed to be in complete local equilibrium above the chemical freeze-out temperature T{sub ch}=165 MeV with the equation of states (EoS) at high temperatures as in the lattice QCD. Below T{sub ch} the EoS in the expanding and gradually decoupling fluid depends on the composition of the hadron-resonance gas at each space-time point and accounts for decays of resonances into the nonequilibrated medium. A good description of the pion and kaon transverse momentum spectra and interferometry radii is reached at both used initial energy density profiles motivated by the Glauber and color glass condensate models, however, at different initial energy densities. The discussion as for the approximate pion and kaon m{sub T} scaling for the interferometry radii is based on a comparison of the emission functions for these particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hyper Suprime-Cam Year 3 results: Cosmology from galaxy clustering and weak lensing with HSC and SDSS using the minimal bias model

Here, we present cosmological parameter constraints from a blind joint analysis of three two-point correlation functions measured from the Year 3 Hyper Suprime-Cam (HSC-Y3) imaging data, covering about 416 deg 2 , and the SDSS DR11 spectroscopic galaxies spanning the redshift range [0.15, 0.70]. We subdivide the SDSS galaxies into three luminosity-cut, and therefore nearly volume-limited samples separated in redshift, each of which acts as a large-scale structure tracer characterized by the measurement of the projected correlation function, w p ⁡(R). We also use the measurements of the galaxy-galaxy weak-lensing signal Δ⁢Σ⁡(R) for each of these SDSS samples which act as lenses for a secure sample of source galaxies selected from the HSC-Y3 shape catalog based on their photometric redshifts. We combine these measurements with the cosmic shear correlation functions, ξ ± ⁡($\vartheta$) measured for our HSC source sample. We model these observables with the minimal bias model of the galaxy clustering observables in the context of a flat Λ⁢CDM cosmology. We use conservative scale cuts, R >12 and 8⁢ℎ -1 Mpc for Δ⁢Σ and w p , respectively, where the minimal bias model is valid, in addition to conservative prior on the residual bias in the mean redshift of the HSC photometric source galaxies. We present various validation tests of our model as well as analysis methods. Our baseline analysis yields S 8 = $0.77⁢5^{+0.043}_{-0.038}$ (68% C.I.) for the Λ⁢CDM model, after marginalizing over uncertainties in other parameters. Our value of S 8 is consistent with that from the Planck 2018 data, but the credible interval of our result is still relatively large. We show that various internal consistency tests based on different splits of the data are passed. Our results are statistically consistent with those of a companion paper, which extends this analysis to smaller scales with an emulator-based halo model, using Δ⁢Σ⁡(R) and w p ⁡(R) down to R >3 and 2⁢ℎ -1 Mpc, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Trapping of high-energy electrons into regime of surfatron acceleration by electromagnetic waves in space plasma

The phenomenon of trapping of weakly relativistic charged particles (with kinetic energies on the order of mc{sup 2}) into a regime of surfatron acceleration by an electromagnetic wave that propagates in plasma across a weak external magnetic field has been studied using nonlinear numerical calculations based on a solution of the relativistic equations of motion. Analysis showed that, for the wave amplitude above a certain threshold value and the initial wave phase outside the interval favorable for the surfing regime, the trajectory of a charged particle initially corresponds to its cyclotron rotation in the external magnetic field. For the initial particle energies studied, the period of this rotation is relatively short. After a certain number (from several dozen to several thousand and above) of periods of rotation, the wave phase takes a value that is favorable for trapping of the charged particle on its trajectory by the electromagnetic wave, provided the Cherenkov resonance conditions are satisfied. As a result, the wave traps the charged particle and imparts it an ultrarelativistic acceleration. In momentum space, the region of trapping into the regime of surfing on an electromagnetic wave turns out to be rather large.

79 ASTRONOMY AND ASTROPHYSICS↗

Utah FORGE: Neubrex Well 16B(78)-32 DAS Data - April, 2024

This dataset comprises Distributed Acoustic Sensing (DAS) data collected from the Utah FORGE monitoring well 16B(78)-32 (the producer well) during hydraulic fracture stimulation operations conducted in April 2024. The data were acquired continuously over the stimulation period at a temporal sampling rate of 10,000 Hz (10 kS/s) and a spatial resolution of approximately 3.35 feet (1.02109 meters). The measurements were captured using a Neubrex NBX-S4100 Time Gated Digital DAS interrogator unit connected to a single-mode fiber optic cable, which was permanently installed within the casing string. All recorded channels correspond to downhole segments of the fiber optic cable, from a measured depth (MD) of 5,369.35 feet to 10,352.11 feet. The DAS data reflect raw acoustic energy generated by physical processes within and surrounding the well during stimulation activities at wells 16A(78)-32 and 16B(78)-32. These data have potential applications in analyzing cross-well strain, far-field strain rates (including microseismic activity), induced seismicity, and seismic imaging. Metadata embedded in the attributes of the HDF5 files include detailed information on the measured depths of the channels, interrogation parameters, and other acquisition details. The dataset also includes a recording of a seminar held on September 19, 2024, where Neubrex's Chief Operating Officer presented insights into the data collection, analysis, and preliminary findings. The raw data files, stored in HDF5 format, are organized chronologically according to the recording intervals from April 9 to April 24, 2024, with each file corresponding to a 12-second recording interval.

15 GEOTHERMAL ENERGY↗

Quantifying and Qualifying Alloys Based on Level of Homogenization: A U–10 wt% Mo Alloy Case Study

Homogenization heat treatment is performed to attain uniformity in microstructure of metals and metal alloys, which is helpful to achieve the desired workability and microstructure in final products, and eventually to gain predictable and consistent performance. Fabrication of fuel plates made from a low-enriched uranium alloy with 10 wt% Mo (U-10Mo) involves multiple thermomechanical processing steps. It is well known that the molybdenum homogeneity in the final formed product affects the fuel performance in the nuclear reactor. To make sure these materials are uniformly homogenized, a statistical method was proposed to quantify and characterize the Mo concentration variation in U-10Mo fuel plates by analyzing the Mo concentration measurement data from scanning electron microscopy–energy dispersive spectroscopy line scans. Statistical tolerance intervals were employed to determine the qualification of U-10Mo fuel plates. We formulate an argument for the minimum number of independent samples required to define fuel plate qualification if no Mo measurement data are available in advance, and demonstrate that the given tolerance interval requirements can be equivalently reduced to a sample variance criterion in this application. The outcome of the statistical analysis can be used to optimize casting design and eventually increase productivity and reduce fabrication cost. The statistical strategy developed in this report can be implemented for other applications, especially in the field of material manufacturing to assess qualification requirements and monitor and improve process design.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Backward elastic pd scattering at 316, 364, 470 and 590 MeV

Preliminary results are reported from a part of the data obtained at the NASA Space Radiation Effect Laboratory for the elastic scattering of protons by deuterons in the backward hemisphere. The data is averaged over a proton angle interval which corresponds to the angular resolution on the correlation angle, given the proton bin used in the data analysis.

Alder, J. C.↗

Ion and laser microprobes applied to the measurement of corrosion produced hydrogen on a microscopic scale.

Use of an ion microprobe and a laser microprobe to measure concentrations of corrosion-produced hydrogen on a microscopic scale. Hydrogen concentrations of several thousand ppm were measured by both analytical techniques below corroded and fracture surfaces of hot salt stress corroded titanium alloy specimens. This extremely high concentration compares with only about 100 ppm hydrogen determined by standard vacuum fusion chemical analyses of bulk samples. Both the ion and laser microprobes were used to measure hydrogen concentration profiles in stepped intervals to substantial depths below the original corroded and fracture surfaces. For the ion microprobe, the area of local analysis was 22 microns in diameter and for the laser microprobe, the area of local analysis was about 300 microns in diameter. The segregation of hydrogen below fracture surfaces supports a previously proposed theory that corrosion-produced hydrogen is responsible for hot salt stress corrosion embrittlement and cracking of titanium alloys. These advanced analytical techniques suggest great potential for many areas of stress corrosion and hydrogen embrittlement research, quality control, and field inspection of corrosion problems. For example, it appears possible that a contour map of hydrogen distribution at notch roots and crack tips could be quantitatively determined. Such information would be useful in substantiating current theories of stress corrosion and hydrogen embrittlement.

Gray, H. R.↗

Investigation of ground reflection and impedance from flyover noise measurements

An extensive series of flyover noise tests was conducted for the primary purpose of studying meteorological effects on propagation of aircraft noise. The test airplane, a DC 9-10, flew several level-flight passes at various heights over a taxiway. Two microphone stations were located under the flight path. A total of 37 runs was selected for analysis and processed to obtain a consistant set of 1/3 octave band sound pressure levels at half-second intervals. The goal of the present study was to use the flyover noise data to deduce acoustical reflection coefficients and hence, acoustical impedances.

Chapkis, R. L.↗

Future data processing and its effect on spaceborne sensors

Remotely sensed data are attaining a new stature. New model for their use are being developed. Data delays are being overcome, and consideration is being given to multiple satellites and platforms providing shorter-interval repeat coverage. Statewide data systems are being developed to take advantage of remotely sensed data as a new analysis tool.

Billingsley, F. C.↗

Sensitivity of SLR baselines to errors in Earth orientation

The sensitivity of inter station distances derived from Satellite Laser Ranging (SLR) to errors in Earth orientation is discussed. An analysis experiment is performed which imposes a known polar motion error on all of the arcs used over this interval. The effect of the averaging of the errors over the tracking periods of individual sites is assessed. Baselines between stations that are supported by a global network of tracking stations are only marginally affected by errors in Earth orientation. The global network of stations retains its integrity even in the presence of systematic changes in the coordinate frame. The effect of these coordinate frame changes on the relative locations of the stations is minimal.

Smith, D. E.↗

A Monte Carlo study of Weibull reliability analysis for space shuttle main engine components

The incorporation of a number of additional capabilities into an existing Weibull analysis computer program and the results of Monte Carlo computer simulation study to evaluate the usefulness of the Weibull methods using samples with a very small number of failures and extensive censoring are discussed. Since the censoring mechanism inherent in the Space Shuttle Main Engine (SSME) data is hard to analyze, it was decided to use a random censoring model, generating censoring times from a uniform probability distribution. Some of the statistical techniques and computer programs that are used in the SSME Weibull analysis are described. The methods documented in were supplemented by adding computer calculations of approximate (using iteractive methods) confidence intervals for several parameters of interest. These calculations are based on a likelihood ratio statistic which is asymptotically a chisquared statistic with one degree of freedom. The assumptions built into the computer simulations are described. The simulation program and the techniques used in it are described there also. Simulation results are tabulated for various combinations of Weibull shape parameters and the numbers of failures in the samples.

Abernethy, K.↗

Evidence of atmospheric gravity wave perturbations of the Brunt-Vaisala frequency in the atmosphere

A series of high altitude, medium resolution, measurements of temperature, pressure and turbulence have been performed by the Air Force Geophysics Laboratory. These measurements were conducted using the VIZ Manufacturing Co. microsondes with attached micro-thermal probes measuring the temperature structure coefficient. A typical atmospheric temperature measurement is given. Several small temperature inversions are evident in the troposphere. The stratosphere is marked with numerous fluctuations in the temperature profile. Microsondes provide temperature and pressure measurements every 4 seconds up to a maximum altitude of 30 km (MSL). Since the average ascent rate is 5 m/s, the altitude interval between the measurement reports is 20 m. The potential temperature is calculated from the temperature and pressure. Spectral analysis of atmospheric Brunt-Vaisala frequencies reveal spectra similiar to the velocity spectra of Dewan et al. (1984), Daniels (1982), and Endlich and Singleton (1969). The Brunt-Vaisala spectra indicate the existence of separate, distinguishable wave modes.

Good, R. E.↗

Magnetic field draping in the Comet Halley coma - Comparison of Vega observations with computer simulations

During the Vega-1 encounter with Comet Halley, the magnetometer observed draping and compression of the interplanetary magnetic field. These are reproduced well by a three-dimensional MHD simulation of the cometary interaction. Rotations in the magnetic field similar to those at closest approach are also observed 2.75 hours earlier. It is suggested that both rotations correspond to the same IMF interval and that the spacecraft had overtaken the plasma and encountered 'older' magnetic field as it penetrated the coma. Analysis of the MHD model indicates that it should take about 3 to 5 hours for a solar wind parcel to pass from the unperturbed solar wind to Vega-1 at closest approach. A simulated magnetic field profile composed of nested sections for different IMF orientations closely resembles the observations. This result supports the hypothesis of layered magnetic orientations in the coma.

Schwingenschuh, K.↗

Surface composition of solid-rocket exhausted aluminum oxide particles

Particulate samples of aluminum oxide were collected on Teflon filters from the exhaust plume of the Space Shuttle (STS-61A, October 30, 1985) over the altitude interval 4.6-7.6 km immediately after launch. These particles were analyzed using SEM, energy-dispersive X-ray analysis, electron spectroscopy for chemical analysis, X-ray fluorescent spectroscopy, and conventional wet-chemical techniques. The samples were 0.6-1.0 percent surface-chlorided (chlorided meaning predominantly aluminum chlorides and oxychlorides, possibly including other adsorbed forms of chloride) by weight. This level of chloriding is about one-third of the amount determined previously from laboratory-prepared alumina and surface site samples of solid-rocket-produced alumina (SRPA) after both had been exposed to moist HCl vapor at temperatures down to ambient. This level is equivalent to previous laboratory results with samples exposed to moist HCl at temperatures above the boiling point of water. It is suggested that the present lower chloriding levels, determined for samples from a 'dry' Shuttle exhaust cloud, underscore the importance of a liquid water/hydrochloric acid phase in governing the extent of surface chloriding of SRPA. The reduced chloriding is not trivial with respect to potential physical/chemical modification of the SRPA particle surfaces and their corresponding interaction with the atmosphere.

Cofer, Wesley R., III↗

Analysis of the effects of mean local node-crossing time on the evolution of Sun-synchronous orbits

An investigation of the effect of mean local node-crossing time on the evolution of Sun-synchronous orbits was undertaken during Phase-A orbit analysis for the National Oceanic and Atmospheric Administration (NOAA) O,P,Q environmental spacecraft. That analysis added to the growing body of evidence that individual Sun-synchronous missions, at differing node-crossing times, experience nodal drift rates that can differ in both magnitude and direction. A Sun-synchronous orbit is obtained by means of a nodal drift rate approximating the 0.9856-degree-per-day apparent precession of the position of the mean Sun. This drift rate is achieved through the interaction of the orbital semimajor axis and inclination in Earth's geopotential field. Influencing perturbations include atmospheric drag and, most important, the effects of solar gravitation on inclination. The present analysis examines a series of Sun-synchronous orbits with mean local node-crossing times at 1-hour intervals from 6 a.m. to 6 p.m. It considers the fixed geometry of each orbital plane with respect to both the Sun and the diurnal atmospheric bulge, then analyzes the influence of these features upon the evolution of the semimajor axix and inclination and thus upon the rate of the nodal drift in the course of 1 year.

Jordan, P.↗

Analysis of atmospheric trace constituents from high resolution infrared balloon-borne and ground-based solar absorption spectra

Results of ongoing studies of high-resolution solar absorption spectra aimed at the identification and quantification of trace constituents of importance in the chemistry of the stratosphere and upper troposphere are presented. An analysis of balloon-borne and ground-based spectra obtained at 0.0025/cm covering the 700-2200/cm interval is presented. The 0.0025/cm spectra, along with corresponding laboratory spectra, improves the spectral line parameters, and thus the accuracy of quantifying trace constituents. Results for COF2, F22, SF6, and other species are presented. The retrieval methods used for total column density and altitude distribution for both ground-based and balloon-borne spectra are also discussed.

Goldman, A.↗