Search NASA⌕ Search

SEARCH · Search NASA

Results for “long term testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Labeled Release - An experiment in radiorespirometry

The Labeled Release extraterrestrial life detection experiment onboard the Viking spacecraft is described as it will be implemented on the surface of Mars in 1976. This experiment is designed to detect heterotrophic life by supplying a dilute solution of radioactive organic substrates to a sample of Martian soil and monitoring for evolution of radioactive gas. A significantly attenuated response by a heat-sterilized control sample of the same soil would confirm a positive metabolic response. Experimental assumptions as well as criteria for the selection of organic substrates are presented. The Labeled Release nutrient has been widely tested, is versatile in eliciting terrestrial metabolic responses, and is stable to heat sterilization and to the long-term storage required before its use on Mars. A testing program has been conducted with flight-like instruments to acquire science data relevant to the interpretation of the Mars experiment. Factors involved in the delineation of a positive result are presented and the significance of the possible results discussed.

Levin, G. V.↗

Solar energy system economic evaluation: Fern Tunkhannock, Tunkhannock, Pennsylvania

The economic performance of an Operational Test Site (OTS) is described. The long term economic performance of the system at its installation site and extrapolation to four additional selected locations to demonstrate the viability of the design over a broad range of environmental and economic conditions is reported. Topics discussed are: system description, study approach, economic analysis and system optimization, and technical and economical results of analysis. Data for the economic analysis are generated through evaluation of the OTS. The simulation is based on the technical results of the seasonal report simulation. In addition localized and standard economic parameters are used for economic analysis.

Source record↗

Steady generation of aerosols with an improved constant output atomizer

It is common practice to generate laboratory aerosols of soluble materials with pneumatic atomizers. In a typical device, a solution of the substance to be aerosolized is injected into a jet of air and the liquid is broken up into very small droplets. After forced evaporation, a dry aerosol of the solute is produced. A number of commercially available devices were tested, and despite differences in design, all the atomizers tested suffered from short- and/or long-term fluctuations of their output particle number concentrations. The mechanisms responsible for atomizer instabilities are discussed and methods for alleviating these problems are considered.

Dea, J. Y.↗

Transducers for ultrasonic limb plethysmography

The design, construction, and performance characteristics of ultasonic transducers suitable for limb plethysmography are presented. Both 3-mm-diameter flat-plate and 12-mm-diameter hemispheric ceramic transducers operating at 2 MHz were fitted in 1-mm thick epoxy-resin lens/acoustic-coupling structures and mounted in exercie-EKG electrode housings for placement on the calf using adhesive collars. The effects of transducer directional characteristics on performance under off-axis rotation and the electrical impedances of the transducers were measured: The flat transducer was found to be sensitive to rotation and have an impedance of 800 ohms; the hemispheric transducer, to be unaffected by rotation and have an impedance of 80 ohms. The use of hemispheric transducers as both transmitter and receiver, or of a flat transducer as transmitter and a hemispheric transducer as receiver, was found to produce adequate dimensional measurements, with minimum care in transducer placement, in short-term physiological experiments and long-term (up to 7-day) attachment tests.

Nickell, W. T.↗

An imaging proportional counter for a 0.1 to 10 keV X-ray telescope

A xenon multiwire position-sensitive proportional counter (PSPC) with a high degree of long-term stability has been constructed and tested in detail. It is suitable for a 0.1 to 10 keV X-ray telescope such as AXAF, which it would share with detectors having better spatial and spectral resolution. Compared to other detectors, the larger format, higher quantum efficiency, and lower background of the PSPC makes it generally the most useful instrument for observations of diffuse cosmic X-ray sources and associations of sources more extended than a few tenths of a degree in diameter. Given the good spatial linearity, the systematic uncertainty for source locations is finer than an arcsecond. The spatial resolution varies as 0.3 mm/exp 0.5 (keV) over the range 0.2-4 keV, in accordance with theoretical limits determined by the size and the number of electrons in the primary charge cloud.

Gorenstein, P.↗

Interim results from the characterization testing of the Engineering Development (EDM) rubidium clocks for satellite applications

Some interim results from the environmental testing program to evaluate the Engineering Design Model (EDM) of the EG and G Spaceborne Rubidium Clock are presented. This effort is in support of the Global Positioning System (GPS) BLOCK IIR program and is intended to characterize the performance of EG and G design for BLOCK IIR satellite applications. Two EG and G EDM units are currently under test at NRL's Clock Test Facility to measure the long-term frequency stability, drift, and frequency versus temperature characteristics.

Powers, Edward D., Jr.↗

Optimization of the alexandrite laser tuning elements for a water vapor lidar

An overview of some of the developments completed on an alexandrite laser for making water vapor DIAL measurements is presented in this paper. A computer control for active stabilization of the two intracavity etalons has been implemented and recently tested in an aircraft environment. Long-term frequency drift (i.e., 2 hours) of less than 0.7 pm has been observed in the laboratory. An alignment technique to get the optimum free spectral range ratio for the two etalons is also developed.

Ponsardin, Patrick↗

Atomic oxygen resistant protective coatings for the Hubble Space Telescope solar array in low earth orbit

The Hubble Space Telescope back-up solar array (BSFR-ATOX) was designed with atomic oxygen resistant materials to replace the original high efficiency cell (HEC) array. Pending qualification of the BSFR-ATOX array, protective coatings for application to the existing HEC array were evaluated. Three polysiloxane-type coating materials, SWS V-10, DC-100, and CV-1144 were evaluated with respect to atomic oxygen resistance, outgassing, contamination potential, stability under UV irradiation, electron-proton irradiation, thermal cycling, and long-term storage after application. Atomic oxygen testing included characterization of the atomic oxygen plasma using comparison of Kapton reaction to existing flight data, residual gas analysis, and temperature measurements. Results from these tests show DC-100 as a greater contamination concern if used in the vicinity of sensitive optical surfaces, i.e., solar cell cover glasses. The SWS V-10 and CV-1144 coatings met all acceptance criteria.

Burns, H. D.↗

Movement of Trace Elements During Residence in the Antarctic Ice: a Laboratory Simulation

Recent work has determined that differences in the trace element distribution between Antarctic eucrites and non-Antarctic eucrites may be due to weathering during residence in the ice, and samples that demonstrate trace element disturbances do not necessarily correspond to eucrites that appear badly weathered to the naked eye. This study constitutes a preliminary test of the idea that long-term residence in the ice is the cause of the trace element disturbances observed in the eucrites. Samples of a non-Antarctic eucrite were leached in water at room temperature conditions. Liquid samples were analyzed for rare earth element abundances using ion chromatography. The results for the short-term study showed little or no evidence that leaching had occurred. However, there were tantalizing hints that something may be happening. The residual solid samples are currently being analyzed for the unleached trace metals using instrumental neutron activation analysis and should show evidence of disturbance if the chromatography clues were real. In addition, another set of samples continues to be intermittently sampled for later analysis. The results should give us information about the movement of trace elements under our conditions and allow us to make some tentative extrapolations to what we observe in actual Antarctic eucrite samples.

Strait, Melissa M.↗

Stability Analysis of the Planetary System Orbiting Upsilon Andromedae

We present results of long-term numerical orbital integrations designed to test the stability of the three-planet system orbiting Upsilon Andromedae and short-term integrations to test whether mutual perturbations among the planets can be used to determine planetary masses. Our initial conditions are based on the latest fits to the radial velocity data obtained by the planet-search group at Lick Observatory. The new fits result in significantly more stable systems than did the initially announced planetary parameters. An analytic analysis of the star and the two outer planets shows that this subsystem is Hill stable up to five. Our integrations involving all three planets show that the system is stable for at least 100 Myr for up to four. In our simulations, we still see a secular resonance between the outer two planets and in some cases large oscillations in the eccentricity of the inner planet.

Lissauer, Jack J.↗

Stability Analysis of the Planetary System Orbiting Upsilon Andromedae: Simulations Using New Lick Observatory Fits - 2

We present results of long-term numerical orbital integrations designed to test the stability of the three-planet system orbiting upsilon Andromedae and short-term integrations to test whether mutual perturbations among the planets can be used to determine planetary masses. Our initial conditions are based on recent fits to the radial velocity data obtained by the planet search group at Lick Observatory. The new fits result in significantly more stable systems than did the initially announced planetary parameters. Our integrations using the 2000 February parameters show that if the system is nearly planar, then it is stable for at least 100 Myr for m(sub f) = 1/sin i less than or = 4. In some stable systems, the eccentricity of the inner planet experiences large oscillations. The relative periastra of the outer two planets' orbits librate about 0 deg. in most of the stable systems; if future observations imply that the periastron longitudes of these planets are very closely aligned at the present epoch, dynamical simulations may provide precise estimates for the masses and orbital inclinations of these two planets.

Lissauer, Jack J.↗

Highlights of Recent Research Activities at the NASA Orbital Debris Program Office

The NASA Orbital Debris Program Office (ODPO) was established at the NASA Johnson Space Center in 1979. The ODPO has initiated and led major orbital debris research activities over the past 38 years, including developing the first set of the NASA orbital debris mitigation requirements in 1995 and supporting the establishment of the U.S. Government Orbital Debris Mitigation Standard Practices in 2001. This paper is an overview of the recent ODPO research activities, ranging from ground-based and in-situ measurements, to laboratory tests, and to engineering and long-term orbital debris environment modeling. These activities highlight the ODPO's commitment to continuously improve the orbital debris environment definition to better protect current and future space missions from the low Earth orbit to the geosynchronous Earth orbit regions.

Liou, J - C.↗

Predictive Workload Model for Air Traffic Controllers during UAM Operations

The effect of airspace factors on air traffic controller (ATC) workload has been an active area of study for almost three decades due to the importance of safety considerations necessary to design and maintain operations. Existing literature has examined several traffic-related (e.g., number of aircraft under control, loss of separation) contributors to ATC workload and proposed mathematical functions to best describe controller response. However, future air traffic continues to increase in complexity with the introduction of urban air mobility (UAM) – or the transportation of humans and cargo using electric vertical takeoff and landing (eVTOL) aircraft. UAM aims to alleviate congestion for existing ground transportation systems and improve mobility within urban centers and other high-demand locations. This shift in the traditional airspace paradigm necessitates an evolved understanding of model use and development for ATC workload prediction. This study aimed to develop an ATC workload forecasting model based on human-in-the-loop (HITL) simulation data for UAM operations at large airports. Data collected from the HITL simulation served as the training and testing data for a Long Short-Term Memory recurrent neural network and enabled time-series forecasting of ATC workload from traffic characteristics. Results demonstrated the potential of LSTM models for forecasting ATC workload 40 minutes into the future and highlighted important considerations for future development.

predictive model↗

Predictive Workload Model for Air Traffic Controllers during UAM Operations

The effect of airspace factors on air traffic controller (ATC) workload has been an active area of study for almost three decades due to the importance of safety considerations necessary to design and maintain operations. Existing literature has examined several traffic-related (e.g., number of aircraft under control, loss of separation) contributors to ATC workload and proposed mathematical functions to best describe controller response. However, future air traffic continues to increase in complexity with the introduction of urban air mobility (UAM) – or the transportation of humans and cargo using electric vertical takeoff and landing (eVTOL) aircraft. UAM aims to alleviate congestion for existing ground transportation systems and improve mobility within urban centers and other high-demand locations. This shift in the traditional airspace paradigm necessitates an evolved understanding of model use and development for ATC workload prediction. This study aimed to develop an ATC workload forecasting model based on human-in-the-loop (HITL) simulation data for UAM operations at large airports. Data collected from the HITL simulation served as the training and testing data for a Long Short-Term Memory recurrent neural network and enabled time-series forecasting of ATC workload from traffic characteristics. Results demonstrated the potential of LSTM models for forecasting ATC workload 40 minutes into the future and highlighted important considerations for future development.

predictive model↗

Perspective of Dry Interim Storage of spent nuclear fuel (SNF) in Germany - 16504

According to article 6 of the German Atomic Energy Act, storage of nuclear fuel requires a license granted by the competent authority in this field, which is the Federal Office of Radiation Protection (BfS). In 1995 a license to store spent nuclear fuel (SNF) and vitrified high level waste (HAW) for the interim storage facility in Gorleben was granted. Dry Interim storage at the NPP sites in its current form started in 2002 in the interim storage facility next to the NPP Lingen. Since this time each NPP erected its own storage facility and three central storage facilities have been built. All of these facilities use dry storage in metallic dual purpose casks (DPCs). The actual storage licenses for SNF and the HAW (which is stored in Gorleben and Rubenow) are limited to 40 years after closing the transport and storage cask. The first license to expire will be the storage license for the interim storage facility in Gorleben in the year 2035. During the last two years in Germany preparatory consultations to restart the process towards finding a repository took place, organised by a commission. This commission consists out of members of the scientific community, religious parties, social communities and environmental organizations as well as members of federal states governments and members of the German parliament (Bundestag). Recently the commission decided to extend its working period until summer 2016. Taking this background into account the BfS plans to intensify its research into extended interim storage with respect to potential material degradation leading to interference with safety functions (e.g. neutron shielding material). This includes topics like ageing of gasket materials which are already studied in ongoing experiments (e.g. at the Federal Institute for Materials Research and Testing) as well as studies of long term relaxation processes. Because of the need for transportation towards a repository another important field is the behaviour of the inventory under mechanical loads. For SNF, first calculations showed that because of the lower decay heat load after 60 years due to hydride reorientation the cladding might become much less ductile. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Mobile Hot Cell for Conditioning Disused Sealed Radioactive Sources for Storage or Transportation

An innovative Mobile Hot Cell (MHC) has been developed for conditioning Disused Sealed Radioactive Sources (DSRS) category 1 and 2 for storage or transportation. The MHC is designed to provide both Radiological and Biological containment with a maximum capacity of 1000 Ci Co60 or 5000Ci Cs137 source and can be transported via standard cargo containers. This project has been supported through the National Nuclear Safety Administration (NNSA) Offsite Source Recovery Program (OSRP). The project is intended for the international community rather than domestic although domestic use is a possibility. Many countries have significant stockpiles of these devices that are often stored in less-than-optimal circumstances. This necessitates that these devices be addressed expeditiously, and the sources secured. The MHC utilizes robotics, automation, and other non-traditional methods for disassembling, characterizing, and packaging these sources that have reached end of life or are otherwise not needed. These innovative approaches are necessary to facilitate an expedited timeline to efficiently and safely secure these sources in a non-proliferation effort. Conditioning efforts include disassembling the device such as a teletherapy head used for cancer treatment, or blood/research irradiators such that the radioactive sources may be removed safely. The sources are then characterized. Leak checks are performed, dimensions are verified, and serial numbers are confirmed. Upon completion, the sources are typically placed into a Standard Forms Capsule which is seal welded closed. It is leak tested and placed into a Long-Term Storage Shield (LTSS) which can either be secured for storage directly or loaded into an appropriate cask for transportation. Further innovations include multiple deployment scenarios that include a full deployment of MHC components, deployment of the MHC automation internal components to an existing hot cell, deployment of minimally required MHC components and incorporation of sand for shielding, and integration of the MHC for Silo Storage, or Bore Hole Storage efforts. The MHC has evolved from a very specific use case to a “Swiss Army Knife” type of a tool in that it can be readily adapted to a large variety of situations. Innovative approaches such as the use of robotics, Computer Numeric Control (CNC) machining centers, automated welding equipment, HDMI Cameras, and LED lighting are some of the developed technologies incorporated into the MHC design. Shielding is accomplished with a steel walled Base Box which is surrounded by four nesting doll shield shells which when combined limits the external dose rate to 5mr/hr when a 1000 Ci Co60 source is exposed inside.

99 - GENERAL AND MISCELLANEOUS↗

Aluminum Clad Spent Nuclear Fuel Task 2: Oxide Layer Radiolytic Gas Generation Resolution Experiment Test Plan

This document presents the test plan for Task 2 of the Aluminum Clad Spent Nuclear Fuel Long Term Dry Storage Technical Issues Action Plan. This task’s overarching goal is the resolution of gas generation resulting from the radiolytic degradation of the oxide layers on aluminum. The uncertainty associated with the build-up of gaseous radiolytic products inside the ASNF storage canisters is one of the dominant technical challenges associated with long term dry storage of aluminum clad fuel. The objectives of the Task 2 test plan are to: 1. Understand how radiation chemistry inside the ASNF dry storage canister impacts extended dry storage performance. 2. Understand the radiation induced mechanisms governing the production of radiolytic gases and alteration of gas composition within a canister. 3. Correlate the observed changes in material properties of ASNF with the radiolytic degradation of aluminum oxide in fill environments of variable moisture and gas composition. 4. Compile a predictive kinetic modeling tool, to provide quantitative mechanistic insight into the in-cask radiation chemistry of ASNF. 5. Interface with the canister modeling activity of Task 3 to deliver degradation rates for package performance of both sealed and vented scenarios.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗