Search NASA⌕ Search

SEARCH · Search NASA

Results for “path integrals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Ground Testing of 2-µm Triple-Pulse IPDA Lidar for Carbon Dioxide and Water Vapor Measuremets

A triple-pulse, 2-µm, Integrated Path Differential Absorption (IPDA) lidar was developed at NASA Langley Research Center. This active remote sensing instrument provides a technique for measuring atmospheric carbon dioxide and water vapor simultaneously and independently. A 2-µm high-energy pulsed laser is incorporated for the IPDA transmitter, which provides high signal-to-noise ratio measurements using a commercial direct detection system. This results in a high-precision measurement capability for the low troposphere weighted-average column dry-air volume mixing ratio of the gases. Recent IPDA ground testing indicated carbon dioxide and water vapor measurements sensitivities of 8% and 14%, respectively and biases of 0.1%. However, using the R30 centerline position for the on-line enhances the CO2 measurement sensitivity to 0.6%.

Refaat, Tamer F.↗

Using Computational Flow Imaging to Optimize Filtered Rayleigh Scattering Measurements of an Isolator Shock Train

Filtered Rayleigh scattering (FRS) is a laser diagnostic where the intensity of elastically scattered light is measured after it passes through a molecular absorption filter. The filter removes background interference that overwhelms the relatively weak scattering from the gas molecules. However, with a filter, the measured light intensity depends on many of the scattering gas properties, including pressure, density, temperature, and velocity. In this work, CFD simulations of an isolator shock train flow field are input into a physics-based model to predict the values of FRS intensity measurements in a proposed experiment. The goal is to evaluate if a simplistic FRS setup (that utilizes one camera, laser, and absorption filter) can be used to accurately quantify number density despite the fact that the scattered light intensity also depends on other gas properties. It is found that the experimental setup can be optimized such that a linear relationship describes the number density with an average prediction error of 2%. The vast majority of the flow exhibits prediction errors of less than 3%, but small regions of the flow reach up to 11% error. A sensitivity analysis shows that the prediction error increases with the central wavelength of the incident laser light and decreases with the angle between the camera and laser propagation directions. The optimal experimental parameters are chosen based on a compromise between the prediction error, spatial resolution, and the amount of unfiltered light. In the future, the proposed FRS setup will be implemented to acquire new and valuable information on an isolator shock train, a flow field that has been traditionally studied using wall static pressure measurements and path-integrated visualization techniques, such as schlieren and shadowgraphy.

Hunt, Robin L.↗

TPSAS-NF1676L-28149-DND

An Optimal Estimation (OE) inversion method has been developed to retrieve vertical profiles of aerosol size distributions, volume/surface concentrations, complex refractive indices, and single scattering albedos using the High Spectral Resolution Lidar (HSRL) and polarimeter measurements. By combining the active and passive remote sensing data, we can take advantages of the high vertical resolution of the lidar measurements and the high information content of the combined observations. There are three components to the new retrieval system: 1) simultaneous aerosol vertical profile retrieval using HSRL data, 2) standalone aerosol retrieval using Research Scanning Polarimeter (RSP), and 3) combined HSRL and RSP optimal estimation retrieval. For the LIDAR retrieval, we solve for number concentrations, mode fractions, aerosol size distributions, and real and imaginary part of refractive indices simultaneously. Based on this information, other parameters such as effective particle radius, surface and volume concentration, single scattering albedo can be derived. The combined HSRL-polarimeter algorithm will provide improved single scattering albedo and refractive index retrievals. The newly developed retrieval algorithm is very fast, and it provides an optimal estimation solution with associated error estimates. By solving for the aerosol vertical profiles using HSRL extinctions and backscattering coefficients from different layers, the new OE method can effectively reduce the impact of measurement noise on the retrieved aerosol microphysical properties. It also enables us to effectively combing HSRL and RSP data in the single OE retrieval system since the passive polarimeter instruments measure path-integrated intensity and polarizations. We have performed sensitivity studies using simulated data and applied the OE algorithms to NASA airborne field data measured by the HSRL-2 and the RSP instruments.

Xu Liu↗

TPSAS-NF1676L-11930-DND

Under the NASA Laser Risk Reduction Program (LRRP), funded by Earth Science Technology Office (ESTO), an efficient, injection seeded, high repetition rate Tm:fiber laser pumped Ho:YLF laser has been developed and operation between 100 Hz to 10 kHz has been demonstrated. The work is underway to develop an efficient, high-repetition-rate, pulsed, 2-micron, coherent Differential Absorption Lidar (DIAL) / Integrated Path Differential Absorption (IPDA) instrument for measuring the atmospheric CO2 profiles (DIAL) and column densities (IPDA) from an airborne platform. In DIAL mode, this instrument will provide the first ever range-resolved, high-precision, remote measurements of the CO2 content of the atmospheric boundary layer (ABL) and lower troposphere.

Upendra N Singh↗

A Model Predictive Control Approach for In-Flight Acoustic Constraint Compliance

Vehicle noise remains one of the major barriers to public acceptance of Urban Air Mobility-class aircraft. This work focuses on motion planning for aircraft in noise-sensitive areas. A nonlinear Model Predictive Path Integral~(MPPI) control law is used to generate a finite-horizon trajectory that satisfies acoustic level constraints at a set of observer locations. The MPPI framework places no restrictions on the class of state-dependent cost functionals that can be employed, making it well-suited for use with sophisticated acoustic models and metrics, in addition to dynamic and mission-relevant constraints. The proposed control law is also suitable for implementation in a real-time application. A simulation example demonstrates the ability of the controller to modify the flight trajectory in order to satisfy acoustic constraints at multiple measurement locations.

Aircraft motion planning↗

A Model Predictive Control Approach for In-Flight Acoustic Constraint Compliance

Vehicle noise remains one of the major barriers to public acceptance of Urban Air Mobility class aircraft. This work focuses on motion planning for aircraft in noise-sensitive areas. A nonlinear Model Predictive Path Integral (MPPI) control law is used to generate a finite horizon trajectory that satisfies acoustic level constraints at a set of (three-dimensional) observer locations. The MPPI framework places no restrictions on the class of state-dependent cost functionals that can be employed, making it well-suited for use with sophisticated acoustic models and metrics, in addition to dynamic and mission-relevant constraints. The model predictive control architecture is also suitable for implementation in a real-time application. A simulation example demonstrates the ability of the controller to modify the flight trajectory in order to satisfy acoustic constraints at multiple measurement locations.

acoustically-aware vehicle↗

A Model Predictive Control Approach for In-Flight Acoustic Constraint Compliance

Vehicle noise remains one of the major barriers to public acceptance of Urban Air Mobility-class aircraft. This work focuses on motion planning for aircraft in noise-sensitive areas. A nonlinear Model Predictive Path Integral (MPPI) control law is used to generate a finite-horizon trajectory that satisfies acoustic level constraints at a set of (three-dimensional) observer locations. The MPPI framework places no restrictions on the class of state-dependent cost functionals that can be employed, making it well-suited for use with sophisticated acoustic models and metrics, in addition to dynamic and mission-relevant constraints. The model predictive control architecture is also suitable for implementation in a real-time application. A simulation example demonstrates the ability of the controller to modify the flight trajectory in order to satisfy acoustic constraints at multiple measurement locations.

acoustically-aware vehicle↗

Retrieval Algorithm for the Column CO2 Mixing Ratio from Pulsed Multi-Wavelength Lidar Measurements

The retrieval algorithm for the column mixing ratio of CO2 from the measurements of a pulsed multi-wavelength integrated path differential absorption (IPDA) lidar is described. The lidar samples the shape of the 1572.33 nm CO2 absorption line at 15 or 30 wavelengths. The algorithm uses a least-squares fit between the CO2 line shape computed from a layered 10 atmosphere model to that sampled by the lidar. In addition to the column average CO2 dry air mole fraction (XCO2), several other parameters are also solved simultaneously from the fit. These include the Doppler shift in the received laser signal wavelengths, the product of the surface reflectivity and atmospheric transmission and a linear trend in the lidar receiver’s spectral response. The algorithm can also be used to solve for the average water vapor mixing ratio, which causes a secondary absorption in the wings of the CO2 absorption line under high humidity conditions. The least-squares fit is linearized about the 15 expected XCO2 value which allows the use of a standard linear least-squares fitting method and software tools. The standard deviation of the retrieved XCO2 is obtained from covariance matrix of the fit. An averaging kernel is defined similarly to that used for passive trace-gas sounding. Examples are presented of using the algorithm to retrieve XCO2 from the measurements from NASA Goddard’s airborne CO2 Sounder lidar made at a constant altitude and during spiral-down maneuvers.

Xiaoli Sun↗

A New Laser Transmitter for Methane and Water Vapor Measurements at 1.65 μm

Atmospheric methane trends over the last few years have been increasing at a rate of 7-12 parts per billion (ppb) per year after brief a pause in the first decade of this century. The reasons for the pause and subsequent increase remains unclear. Thus, there is a critical need for additional, precise and accurate methane observations to understand the natural and anthropogenic processes that drive the trends in atmospheric methane and to constrain its sources, and sinks. At NASA Goddard Space Flight Center (GSFC), in collaboration with Freedom Photonics Inc., we have been developing a lidar to measure atmospheric methane using Integrated Path Differential Absorption (IPDA) from an airborne platform as a precursor to a future space mission. In this paper we present the design of a laser transmitter operating at ~1651 nmbased on a newly developed Distributed Bragg Grating (DBR) seed laser and an Optical parametric oscillator (OPO). The DBR is rapidly step-tuned over the methane absorption at several discrete wavelengths. This multi-wavelength approach enables us to sample the entire methane lineshape and reduce systematic errors.

Atmospheric methane trends↗

1.6-μm Er:YGG Waveguide Amplifiers

We report on the fabrication and characterization of Er:YGG films suitable for waveguide amplifiers that could in principle be used in integrated path differential absorption lidar systems. Presented is our fabrication technique, comprising pulsed-laser-deposition growth of ~10 μm-thick crystalline films, their channeling via ultraprecision ductile dicing with a diamond-blade, producing optical quality facets and sidewalls, and amplifier performance. Net gain at 1572 nm and 1651 nm is obtained for the first time in Er-doped YGG waveguide amplifiers. Additionally, in a channel waveguide a maximum internal gain of 3.5 dB/cm at the 1533nm peak was realized. Recent crystal film quality improvements promise further performance enhancements needed for the intended application for high-peak power sources in the 1.6-μm spectral region targeting Earth observation systems for monitoring greenhouse gases.

greenhouse gases; planar waveguide amplifiers↗

Convective precipitation retrievals from space-borne dual frequency (Ka- and W-band) radar observations

The 2017 Decadal Survey highlighted Earth System Science themes, science and application questions that led to the inclusion aerosols (A), clouds, convection, and precipitation (CCP) in the list of designated observables (DOs) to be pursued within the decade following the survey. Multiple observing system architectures were considered during the NASA A-CCP study, and dual frequency Ka-W band radars have been identified as components of the most likely architectures due to their ability to significantly contribute to the achievement of the science objectives and their synergy with other essential instruments. We present an algorithm to estimate convective precipitation from dual frequency, Ka- and W-band, observations applicable to the observing system architectures considered in the A-CCP study. The algorithm is based on the radar profiling algorithm used within the operational NASA GPM combined algorithm but features an additional module that makes the retrieval problem well-posed in cases of severe attenuation and potential loss of signal below the freezing level. The additional module is developed from GPM combined retrievals and consists of a procedure that generates an ensemble of potential retrievals consistent with the portions of the Ka-band and W-band observation profiles above the noise level. The ensemble solution is refined based on estimates of Path Integrated Attenuation (PIA) from the Surface Reference Technique (SRT) and radiometric observations.

Mircea Grecu↗

GPM DPR Retrievals: Algorithm, Evaluation, and Validation

The primary goal of the Dual-frequency Precipitation Radar (DPR) aboard the Global Precipitation Measurement (GPM) core satellite is to infer precipitationrate and raindrop/particle size distributions (DSD/PSD). The focus of this paper is threefold: 1)description of the DPR retrieval algorithm that uses an adjustable relationship between rainrate (R) and the mass-weighted diameter (Dm) or an R-Dm relationship in solving for R and Dmsimultaneously; 2) evaluation of the DPR algorithm based on the physical simulationsthat employ measured DSD/PSD to understand the mechanism and errorcharacteristics of the retrieval method; 3) review of ground validation studies for theDPR product as well as analysis of the strengths and weaknesses of the ground radarand rain gauge/disdrometer validations. Overall, the DPR Version-6 algorithmprovides reasonably accurate estimates of R and Dm in rain. Non-uniformity in therain profile, however, tends to degrade the accuracy of the R and Dm estimates tosome extent as the range-independent assumption of the adjustable parameter () ofthe R-Dm relation is not able to fully account for natural variation of DSD in the verticalprofile. Underestimation of the DPR snow rate is found when compared with theindependent dual-frequency ratio (DFR) technique. This is possibly the result of theconstraint associated with the path integral attenuation (PIA)/differential PIA (dPIA)used in the DPR algorithm to find the best  and range-independent  assumption. Arange-variable  model, proposed in the DPR Version-7 algorithm, is expected toimprove rain and snow retrieval.

Liang Liao↗

Guidelines for Schlieren Systems at Langley Research Center

The original Langley Working Paper (LWP 448) published on July 27th, 1967, provided guidance to NASA Langley Research Center personnel on how to set up conventional path-integrated schlieren flow visualization systems and what pitfalls could be expected with such setups. The guidance and information contained in the document continues to be used for schlieren setups at NASA Langley Research Center to this day.

Schlieren↗

Airborne lidar measurements of atmospheric CO 2 column concentrations to cloud tops made during the 2017 ASCENDS/ABoVE campaign

We measured the column-averaged atmospheric CO 2 mixing ratio (XCO 2 ) to a variety of cloud tops with an airborne pulsed multi-wavelength integrated path differential absorption (IPDA) lidar during NASA's 2017 ASCENDS/ABoVE airborne campaign. Measurements of height-resolved atmospheric backscatter profiles allow this lidar to retrieve XCO 2 to cloud tops, as well as to the ground, with accurate knowledge of the photon path length. We validated these measurements with those from an onboard in situ CO 2 sensor during spiral-down maneuvers. These lidar measurements were 2–3 times better than those from previous airborne campaigns due to our using a wavelength step-locked laser transmitter and a high-efficiency detector for this campaign. Precisions of 0.6 parts per million (ppm) were achieved for 10 s average measurements to mid-level clouds and 0.9 ppm to low-level clouds at the top of the planetary boundary layer. This study demonstrates the lidar's capability to fill in XCO 2 measurement gaps in cloudy regions and to help resolve the vertical and horizontal distributions of atmospheric CO 2 . Future airborne campaigns and spaceborne missions with this capability can be used to improve atmospheric transport modeling, flux estimation and carbon data assimilation.

Jianping Mao↗

Zemax Modeling of a Self-aligned Focusing Schlieren System with Simulated Compressible Flow

A self-aligned focusing schlieren system is simulated in the ANSYS Zemax OpticStudio software environment. The model uses a custom scatter-defining dynamic link library on the retroreflective background in order to scatter rays in the direction of the incident ray rather than the specular ray. Simulated compressible flow refractive index fields are imported into Zemax by use of the grid gradient object and a workaround to the maximum point limit is introduced. The Ronchi ruling is built as a high resolution bitmap image in MATLAB and set in Zemax as a slide object allowing the bitmap image to either transmit or terminate rays at each line pair. The Zemax simulations are compared to computational numerical schlieren and experimental conventional, path-integrated schlieren results from a hypersonic stagnation point injection flow configuration and an experimental image of a shock wave from a laser-induced breakdown. In the stagnation point injection simulations, the Zemax schlieren images capture complex flow features such as the Mach disk, shear layers, contact surface, and bow shock well, but contains long, curved features (striations) between the model and the bow shock that are not present in the synthetic schlieren image from the CFD or the experimental image. The image from Zemax of the spark-induced shock wave captures the shape and curvature of the shock but appears blurry due to grid discretization in the computational data.

Nicholas A Mejia↗

Efficient calculation of 1-D periodic Green's functions for leaky-wave applications.

In this paper an approach is described for the efficient computation of the mixed-potential scalar and dyadic Green's functions for a one-dimensional periodic (periodic along x direction) array of point sources embedded in a planar stratified structure. Suitable asymptotic extractions are performed on the slowly converging spectral series. The extracted terms are summed back through the Ewald method, modified and optimized to efficiently deal with all the different terms. The accelerated Green's functions allow for complex wavenumbers, and are thus suitable for application to leaky-wave antennas analysis. Suitable choices of the spectral integration paths are made in order to account for leakage effects and the proper/improper nature of the various space harmonics that form the 1-D periodic Green's function.

99 GENERAL AND MISCELLANEOUS↗

Quantification of sauter mean diameter in diesel sprays using scattering-absorption extinction measurements

Quantitative measurements of the primary breakup process in diesel sprays are lacking due to a range of experimental and diagnostic challenges, including: high droplet number density environments, very small characteristic drop size scales (~1-10 μm), and high characteristic velocities in the primary breakup region (~600 m/s). Due to these challenges, existing measurement techniques have failed to resolve a sufficient range of the temporal and spatial scales involved and much remains unknown about the primary atomization process in practical diesel sprays. To gain a better insight into this process, we have developed a joint visible and x-ray extinction measurement technique to quantify axial and radial distributions of the path-integrated Sauter Mean Diameter (SMD) and Liquid Volume Fraction (LVF) for diesel-like sprays. This technique enables measurement of the SMD in regions of moderate droplet number density, enabling construction of the temporal history of drop size development within practical diesel sprays. The experimental campaign was conducted jointly at the Georgia Institute of Technology and Argonne National Laboratory using the Engine Combustion Network “Spray D” injector. X-ray radiography liquid absorption measurements, conducted at the Advanced Photon Source at Argonne, quantify the liquid-fuel mass and volume distribution in the spray. Diffused back-illumination liquid scattering measurements were conducted at Georgia Tech to quantify the optical thickness throughout the spray. By application of Mie-scatter equations, the ratio of the absorption and scattering extinction measurements is demonstrated to yield solutions for the SMD. This work introduces the newly developed scattering-absorption measurement technique and highlights the important considerations that must be taken into account when jointly processing these measurements to extract the SMD. These considerations include co-alignment of measurements taken at different institutions, identification of viable regions where the measurement ratio can be accurately interpreted, and uncertainty analysis in the measurement ratio and resulting SMD. Because the measurement technique provides the spatial history of the SMD development, it is expected to be especially informative to the diesel spray modeling community. Results from this work will aid in understanding the effect of ambient densities and injection pressures on primary breakup and help assess the appropriateness of spray submodels for engine computational fluid dynamics codes.

33 ADVANCED PROPULSION SYSTEMS↗

Testing of the Authenticatable Container Tracking System (ACTS)

The Authenticatable Container Tracking System (ACTS) is being designed to provide a secure container tag that can be used to optimize chain-of-custody monitoring for packaged nuclear materials as they are being stored, processed, and transported. ACTS is an active device that uses an almost-universal core platform that can be appropriately configured to provide the necessary data acquisition, data logging, and communications functions needed for 21st century material accountancy, monitoring, and tracking applications. The core design supports active monitoring of containment, movement, and location and provides secure data transmission via selectable communication methods that can be used throughout the world. This core architecture enables appropriately designed modules to be easily interfaced to the basic system, thus providing an integration path for current and new technologies. ACTS contains a built-in set of sensors but also supports an expansion bus for up to six additional communications, tracking, or sensing modules that may enhance monitoring and tracking of particular containers for specific applications. ACTS stores events in memory, communicates activity to Argonne National Laboratory’s ARG-US TransPort tracking and information server, and provides options for data encryption and authentication. We are currently beginning a testing phase that will field five devices outdoors in a controlled environment to allow evaluation of the functionality of the systems and the hardness of the devices to outdoor conditions. Partners for this system are Oak Ridge National Laboratory, Argonne National Laboratory, Savannah River National Laboratory, Pacific Northwest National Laboratory, and commercialization partner The Aquila Group.

Britton Jr, Chuck↗