Search NASA⌕ Search

SEARCH · Search NASA

Results for “process modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Prognostic Validation of a Neural Network Unified Physics Parameterization

Weather and climate models approximate diabatic and sub-grid-scale processes in terms of grid-scale variables using parameterizations. Current parameterizations are designed by humans based on physical understanding, observations, and process modeling. As a result, they are numerically efficient and interpretable, but potentially oversimplified. However, the advent of global high-resolution simulations and observations enables a more robust approach based on machine learning. In this letter, a neural network-based parameterization is trained using a near-global aqua-planet simulation with a 4-km resolution (NG-Aqua). The neural network predicts the apparent sources of heat and moisture averaged onto (160 km)2 grid boxes. A numerically stable scheme is obtained by minimizing the prediction error over multiple time steps rather than single one. In prognostic single-column model tests, this scheme matches both the fluctuations and equilibrium of NG-Aqua simulation better than the Community Atmosphere Model does.

54 ENVIRONMENTAL SCIENCES↗

Engineered microbial biofuel production and recovery under supercritical carbon dioxide

Culture contamination, end-product toxicity, and energy efficient product recovery are long-standing bioprocess challenges. To solve these problems, we propose a high-pressure fermentation strategy, coupled with in situ extraction using the abundant and renewable solvent supercritical carbon dioxide (scCO 2 ), which is also known for its broad microbial lethality. Towards this goal, we report the domestication and engineering of a scCO 2 -tolerant strain of Bacillus megaterium, previously isolated from formation waters from the McElmo Dome CO 2 field, to produce branched alcohols that have potential use as biofuels. After establishing induced-expression under scCO 2 , isobutanol production from 2-ketoisovalerate is observed with greater than 40% yield with co-produced isopentanol. Finally, we present a process model to compare the energy required for our process to other in situ extraction methods, such as gas stripping, finding scCO 2 extraction to be potentially competitive, if not superior.

09 BIOMASS FUELS↗

Regional trends and drivers of the global methane budget

Abstract The ongoing development of the Global Carbon Project (GCP) global methane (CH 4 ) budget shows a continuation of increasing CH 4 emissions and CH 4 accumulation in the atmosphere during 2000–2017. Here, we decompose the global budget into 19 regions (18 land and 1 oceanic) and five key source sectors to spatially attribute the observed global trends. A comparison of top‐down (TD) (atmospheric and transport model‐based) and bottom‐up (BU) (inventory‐ and process model‐based) CH 4 emission estimates demonstrates robust temporal trends with CH 4 emissions increasing in 16 of the 19 regions. Five regions—China, Southeast Asia, USA, South Asia, and Brazil—account for >40% of the global total emissions (their anthropogenic and natural sources together totaling >270 Tg CH 4 yr −1 in 2008–2017). Two of these regions, China and South Asia, emit predominantly anthropogenic emissions (>75%) and together emit more than 25% of global anthropogenic emissions. China and the Middle East show the largest increases in total emission rates over the 2000 to 2017 period with regional emissions increasing by >20%. In contrast, Europe and Korea and Japan show a steady decline in CH 4 emission rates, with total emissions decreasing by ~10% between 2000 and 2017. Coal mining, waste (predominantly solid waste disposal) and livestock (especially enteric fermentation) are dominant drivers of observed emissions increases while declines appear driven by a combination of waste and fossil emission reductions. As such, together these sectors present the greatest risks of further increasing the atmospheric CH 4 burden and the greatest opportunities for greenhouse gas abatement.

59 BASIC BIOLOGICAL SCIENCES↗

HERON

HERON is a modeling toolset and plugin for RAVEN to accelerate stochastic technoeconomic assessment of the economic viability of various grid-energy system configurations, especially with application to electrical grids and integrated energy systems (IES). The frameworks enabling this toolset are INL's RAVEN and its TEAL plugin. The toolset includes automated RAVEN workflow generation tools for performing stochastic analysis and optimization driven by technoeconomic factors. The workflows generated employ RAVEN for parametric or optimizing study of grid component characteristics, and again for stochastic sampling of regulated and deregulated markets, load, and weather histories. The toolset further provides methods for economically-optimal dispatch of system components given the stochastic samples of market, load, and weather histories. The toolset allows assembling of existing and new models through the RAVEN interface to the Modelica process modeling language.

Talbot, PaulW↗

IDSE Version 1 User's Manual

The integrated development support environment (IDSE) is a suite of integrated software tools that provide intelligent support for information modelling. These tools assist in function, information, and process modeling. Additional tools exist to assist in gathering and analyzing information to be modeled. This is a user's guide to application of the IDSE. Sections covering the requirements and design of each of the tools are presented. There are currently three integrated computer aided manufacturing definition (IDEF) modeling methodologies: IDEF0, IDEF1, and IDEF2. Also, four appendices exist to describe hardware and software requirements, installation procedures, and basic hardware usage.

Mayer, Richard↗

Macro Level Simulation Model Of Space Shuttle Processing

The contents include: 1) Space Shuttle Processing Simulation Model; 2) Knowledge Acquisition; 3) Simulation Input Analysis; 4) Model Applications in Current Shuttle Environment; and 5) Model Applications for Future Reusable Launch Vehicles (RLV's). This paper is presented in viewgraph form.

Source record↗

Parametric Modeling in the CAE Process: Creating a Family of Models

This Presentation meant as an example - Give ideas of approaches to use - The significant benefit of PARAMETRIC geometry based modeling The importance of planning before you build Showcase some NX capabilities - Mesh Controls - Associativity - Divide Face - Offset Surface Reminder - This only had to be done once! - Can be used for any cabinet in that "family" Saves a lot of time if pre-planned Allows re-use in the future

Brown, Christopher J.↗

Least Squares Reverse Time Migration (LSRTM) for Damage Imaging in Composite Laminates

A method for adapting least squares reverse time migration (LSRTM) for ultrasonic guided wave imaging of composite laminates is proposed in this paper. As composites become more widely used in fields such as the aerospace industry, the need for high-resolution imaging in structural health monitoring (SHM) and nondestructive evaluation (NDE) is also growing. For instance, delamination is a common problem in composite laminates, which has led to a certain degree of apprehension in the use of composite materials for load-bearing structures. Although the solver-based imaging techniques using conventional reverse time migration (RTM) methods illuminate damage with a wide range of damage-scattering effects, the resulting images do not fully define the damage regions due to the limited data acquisition aperture, sensor density, frequencies/wavelengths, and incompleteness of adjoint reconstruction. Previously, the LSRTM theory was derived by incorporating a least squares migration (LSM) algorithm into RTM, and benchmarked its high-resolution damage imaging performance for isotropic plates. To improve damage imaging in composite laminates, a process to create an ultrasonic guided wave-based LSRTM method for anisotropic materials is proposed in this paper. The derivation of the forward modeling operator and the adjoint operator is presented. Numerical case studies were conducted to show the improvement of LSRTM over RTM in mapping damage in composite plates. Multiple damage sites or damage with a complex shape were created in the numerical studies based on 1) Born approximation-based modeling or 2) reduction of the plate stiffness-based modeling. LSRTM begins by using a forward modeling process. The forward modeling accuracy for the flexural wave solver used in this study for LSRTM was also compared with the results from a three-dimensional rotated staggered grid (RSG) elastodynamic finite difference solver, previously open-sourced by NASA Langley Research Center. These benchmarking studies have shown that the LSRTM method is more effective in reducing artifacts, improving resolution, and enhancing damage model reconstruction compared to RTM in composite laminates.

Jiaze He↗

Experimental Characterization of an Electric Ducted Fan for the SUSAN 25% Scale Research Vehicle

An electric ducted fan (EDF) was tested in the NASA Langley 12-Foot Low-Speed Tunnel for the SUbsonic Single Aft eNgine (SUSAN) Electrofan 25% scale research vehicle, which incorporates distributed electric fans along the wings and serves as a scaled electrified transport aircraft testbed. The commercial-off-the-shelf EDF was selected as a propulsor that can meet the 25% scale vehicle geometry constraints, along with the performance requirements throughout the flight profile. The test included a series of one-factor-at-a-time (OFAT) and design of experiments (DOE) approaches that were implemented across a range of fan speed, voltage, freestream dynamic pressure, and incidence angle settings to characterize the performance of the EDF. Several test matrix designs and modeling approaches were considered. System identification methods were used to develop a static motor model, a dynamic motor model, an EDF thrust model, and a power consumption model. The model predictive capabilities were then evaluated with validation data not used in the modeling process. The results provide a comprehensive set of models developed to characterize the fan, and offer general insight into EDF modeling approaches.

electric ducted fan↗

Forward Physics Facility

High-energy collisions at the High-Luminosity Large Hadron Collider will produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located 617--682 meters from the ATLAS interaction point along the beam collision axis and shielded by concrete and rock, will host a suite of experiments to probe Standard Model processes and search for physics beyond the Standard Model. The FPF is supported by a rapidly growing user community of 400 physicists, and four pathfinder detectors that are currently operating at the LHC have already yielded promising results, including the first direct detection of collider neutrinos. Here we provide an Executive Summary, and then briefly summarize the status of the FPF, including its rich science case, the facility itself, the proposed FPF experiments and their technical readiness, the preliminary schedule and budget profile, and plans for international participation. Submitted to the DOE/NSF HEPAP Particle Physics Projects Prioritization Panel~(P5)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Semiempirical Model Would Control Czochralski Process

Semiempirical mathematical model proposed for control of growth of single crystals of silicon by Czochralski process. Expresses dependence of pulling rate and shape of liquid/solid interface upon important process variables; radius of growing crystal, temperature of crucible, level of melt, and height of exposed portion of crucible wall. Necessary to control shape of interface in manner consistent with other variables, to maintain radially uniform concentration of dopant, and reduce thermally induced stresses in vicinity of interface. Used to simulate complete growth cycles without requiring excessive computer time consumed by rigorous finite-element modeling.

Dudukovic, M. P.↗

Preface to the Special Issue on TOUGH Symposium 2015

The TOUGH Symposium 2015 was held in Berkeley, California, September 28-30, 2015. The TOUGH family of codes, developed at the Energy Geosciences Division of Lawrence Berkeley National Laboratory (LBNL), is a suite of computer programs for the simulation of multiphase and multicomponent fluid and heat flows in porous and fractured media with applications in many geosciences fields, such as geothermal reservoir engineering, nuclear waste disposal, geological carbon sequestration, oil and gas reservoirs, gas hydrate research, vadose zone hydrology and environmental remediation. Since the first release in the 1980s, many modifications and enhancements have been continuously made to TOUGH and its various descendants (iTOUGH2, TOUGH+, TOUGH-MP, TOUGHREACT, TOUGH+HYDRATE, TMVOC...), at LBNL and elsewhere. Today, these codes are used worldwide in academia, government organizations and private companies in problems involving coupled hydrological, thermal, biogeochemical and geomechanical processes. The Symposia, organized every 2-3 years, bring together developers and users for an open exchange on recent code enhancements and applications. In 2015, the Symposium was attended by one hundred participants, representing thirty-four nationalities. This Special Issue in Computers & Geosciences gathers extended versions of selected Symposium proceedings related to (i) recent enhancements to the TOUGH family of codes and (ii) coupled flow and geomechanics processes modeling. In this special issue, a paper by Jung et al. provides a new base version of TOUGH, TOUGH3. This latest version addresses the computational robustness and efficiency needed for the increasing complexity of the simulated processes and the growing size of model domains. Moreover, it consolidates the serial and parallel versions into a single code, hence, inconsistencies between different versions are less likely to occur, and code maintenance and development become more efficient. Finsterle et al. present a review of the capabilities of iTOUGH2 and illustrate the workflow of an integrated simulation-optimization framework. Liu et al. present an approach to reduce the computational cost of performing Bayesian inverse modeling and demonstrate their approach using a synthetic experiment simulated with TOUGH2. Regarding the mesh generation process, the paper by Doughty presents a generalization of the grid-generation algorithm embedded in TOUGH2 (MESHMAKER) to create one-column grids with fractal dimension, useful for representing flow through fractures or highly heterogeneous media with fractal geometry, and also for inverse methods. Sentís and Gable present a module to interface the open source code Lagrit with TOUGH2, that assists in the processes of mesh generation and model setup, and that can be particularly useful for complex geometries and large models. Bonduà et al. present a pre-processing tool (VORO2MESH) that features a full 3D Voronoi approach for structured and unstructured grids, and an enhanced post-processor (TOUGH2Viewer) for the visualization of 3D Voronoi grids. The literature review shows that coupled fluid flow and geomechanics has gained increasing attention in the last years in many geosciences fields. In this context, several codes of the TOUGH family have been successfully coupled with geomechanics software. The paper by Rutqvist presents a review of some of these TOUGH-based geomechanics models, of which the TOUGH-FLAC simulator – presented for the first time in the TOUGH Symposium 2003 – is well-known worldwide and has been used in a large variety of applications, encompassing the application domains of the TOUGH codes. Blanco-Martín et al. present an extension of TOUGH-FLAC to the finite strain framework, motivated by the existence of large strains associated with rock salt deformation in the context of heat-generating nuclear waste disposal. Following a paper published in the Special Issue of the TOUGH Symposium 2012 in this journal, Kim et al. present the current status of the TOUGH-RSBN simulator for coupled hydro-mechanical modeling of hydraulic fracturing using a discrete fracture network approach, and present some validation and demonstration cases. Rinaldi and Nespoli present TOUGH-SEED, an injection-induced seismicity modeling approach using TOUGH2 and a geomechanics stochastic model, and apply it to the Basel EGS project. Finally, Rinaldi et al. use the PEST protocol implemented in iTOUGH2, combined with TOUGH-FLAC as the forward model, to perform inverse modeling for the In Salah CO2 demonstration site in Algeria. Using pore pressures and InSAR displacements as observations, this approach allows for a multi-physics joint inversion and takes advantage of the inverse capabilities of iTOUGH2 (parameter estimation, sensitivity analysis, uncertainty estimation …), applied to coupled fluid flow and geomechanics. On behalf of the members of the TOUGH Symposium 2015 Organizing Committee, I hope that this collection of papers will provide the readers of Computers & Geosciences with a recent view of the capabilities of the TOUGH family of codes, as well as with current modeling research domains in the geosciences. Last but not least, I would like to express my gratitude to all the reviewers who kindly contributed to this Special Issue, as well as the Journal staff who have made this publication possible.

99 GENERAL AND MISCELLANEOUS↗

Thermal Modelling of the In-Situ Consolidation of Automated Fiber Placement Of Thermoplastic Composites

NASA is developing carbon fiber reinforced thermoplastic composites processing methods under the Hi-rate Composites Aircraft Manufacturing (HiCAM) project. The in-situ consolidation automated fiber placement (AFP) of thermoplastics (ICAT) process has high potential to increase manufacturing throughput and lower costs as it combines the repeatability and fast lay down rates of AFP with the thermoformability of thermoplastic materials to achieve part consolidation out of the autoclave. Physics-based process models are employed in the ICAT process development to understand, fundamentally, the thermal response of the carbon fiber (CF)/polyaryletherketone (PAEK) material during the rapid heating and cooling associated with laser-assisted AFP. A one-dimensional (1-D) closed-form model was developed capable of predicting the temperature profile through-the-thickness of the tape material. In addition, a two-dimensional (2-D) model was developed to predict the heat transfer through-the-thickness and in the laydown x-direction of the AFP head motion. The solution of the Fourier heat-transfer equations in the 2-D model is approximated using the explicit finite difference numerical method. The temperature profile during placement of PAEK slit-tape materials at various laser target temperatures and placement speeds were measured during ICAT process development trials at Electroimpact®, Inc. †† and the resulting experimental data is compared with the predictions of the 1-D and 2-D models.

Christopher J. Stelter↗

Multi-fidelity thermal modeling of laser powder bed additive manufacturing

Laser powder bed fusion (LPBF) Additive manufacturing (AM) has attracted interest as an agile method of building production metal parts to reduce design-build-test cycle times for systems. However, predicting part performance is difficult due to inherent process variabilities. This makes qualification challenging. Computational process models have attempted to address some of these challenges, including mesoscale, full physics models and reduced fidelity conduction models. The goal of this work is credible multi-fidelity modeling of the LPBF process by investigating methods for estimating the error between models of two different fidelities. Two methods of error estimation are investigated, adjoint-based error estimation and Bayesian calibration. Adjoint-based error estimation is found to effectively bounding the error between the two models, but with very conservative bounds, making predictions highly uncertain. Bayesian parameter calibration applied to conduction model heat source parameters is found to effectively bound the observed error between the models for melt pool morphology quantities of interest. However, the calibrations do not effectively bound the error in heat distribution.

36 MATERIALS SCIENCE↗

Verifying and Validating Proposed Models for FSW Process Optimization

This slide presentation reviews Friction Stir Welding (FSW) and the attempts to model the process in order to optimize and improve the process. The studies are ongoing to validate and refine the model of metal flow in the FSW process. There are slides showing the conventional FSW process, a couple of weld tool designs and how the design interacts with the metal flow path. The two basic components of the weld tool are shown, along with geometries of the shoulder design. Modeling of the FSW process is reviewed. Other topics include (1) Microstructure features, (2) Flow Streamlines, (3) Steady-state Nature, and (4) Grain Refinement Mechanisms

Schneider, Judith↗

Data-Driven Model Predictive Control for Temperature Management of Heat Pipe Microreactor

To enable the self-regulating capability of heat pipe (HP) microreactors, an anticipatory control strategy through model predictive control (MPC) could proactively respond to potential disturbances and deviations in operating setpoints. However, a key factor prohibiting the widespread adoption of MPCs in nuclear applications is the effort and computational costs associated with learning and calibrating first-principles-based process models when the target system is complex and when there are gaps between modeled and target reactor systems. In this paper, we demonstrate data-driven MPC using three approaches for modeling the system dynamics, including a linear state-space model, feedforward neural network, and recurrent neural networks long short-term memory. We present the development and validation process of each model and compare the performance of data-driven MPCs in controlling the temperatures of selected HPs at the evaporator and condenser regions in a 37-HP-monolith system. Our results show that, qualitatively, all data-driven MPCs are producing similar control actions, while quantitatively, with artificial neural nets (especially feedforward neural nets), MPC can better follow drastic changes in setpoints with smallest errors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Jitter model and signal processing techniques for pulse width modulation optical recording

A jitter model and signal processing techniques are discussed for data recovery in Pulse Width Modulation (PWM) optical recording. In PWM, information is stored through modulating sizes of sequential marks alternating in magnetic polarization or in material structure. Jitter, defined as the deviation from the original mark size in the time domain, will result in error detection if it is excessively large. A new approach is taken in data recovery by first using a high speed counter clock to convert time marks to amplitude marks, and signal processing techniques are used to minimize jitter according to the jitter model. The signal processing techniques include motor speed and intersymbol interference equalization, differential and additive detection, and differential and additive modulation.

Liu, Max M.-K.↗