Search NASA⌕ Search

SEARCH · Search NASA

Results for “random systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Wiring Damage Analyses for STS OV-103

This study investigated the Shuttle Program s belief that Space Transportation System (STS) wiring damage occurrences are random, that is, a constant occurrence rate. Using Problem Reporting and Corrective Action (PRACA)-derived data for STS Space Shuttle OV-103, wiring damage was observed to increase over the vehicle s life. Causal factors could include wiring physical deterioration, maintenance and inspection induced damage, and inspection process changes resulting in more damage events being reported. Induced damage effects cannot be resolved with existent data. Growth analysis (using Crow-AMSAA, or CA) resolved maintenance/inspection effects (e.g., heightened awareness) on all wire damages and indicated an overall increase since Challenger Return-to-Flight (RTF). An increasing failure or occurrence rate per flight cycle was seen for each wire damage mode; these (individual) rates were not affected by inspection process effects, within statistical error.

Thomas, Walter, III↗

AVNG authentication features

Any verification measurement performed on potentially classified nuclear material must satisfy two seemingly contradictory constraints. First and foremost, no classified information can be released. At the same time, the monitoring party must have confidence in the veracity of the measurement (called authentication). An information barrier (IB) is included in the measurement system to protect the potentially classified information. To achieve both goals, the IB allows only very limited, previously agreed-on information to be displayed to the monitoring party. In addition to this limited information from the potentially classified measurement, other measurements are performed and procedures are put in place for the monitoring party to gain confidence that the material being measured is consistent with the host's declarations concerning that material. In this presentation, we will discuss the techniques used in the AVNG attribute measuring system to facilitate authentication of the verification measurements by the monitors. These techniques include measuring unclassified items while allowing more information to be displayed; having the monitor understand the system function, design, and implementation; and randomly selecting the order of measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Discriminant forest classification method and system

A hybrid machine learning methodology and system for classification that combines classical random forest (RF) methodology with discriminant analysis (DA) techniques to provide enhanced classification capability. A DA technique which uses feature measurements of an object to predict its class membership, such as linear discriminant analysis (LDA) or Andersen-Bahadur linear discriminant technique (AB), is used to split the data at each node in each of its classification trees to train and grow the trees and the forest. When training is finished, a set of n DA-based decision trees of a discriminant forest is produced for use in predicting the classification of new samples of unknown class.

54 ENVIRONMENTAL SCIENCES↗

Multilevel resistive information storage and retrieval

The present invention relates to resistive random-access memory (RRAM or ReRAM) systems, as well as methods of employing multiple state variables to form degenerate states in such memory systems. The methods herein allow for precise write and read steps to form multiple state variables, and these steps can be performed electrically. Such an approach allows for multilevel, high density memory systems with enhanced information storage capacity and simplified information retrieval.

42 ENGINEERING↗

Development and application of a standardized flow measurement uncertainty analysis framework to various low-head short-converging intake types across the United States federal hydropower fleet

Turbine discharges at low-head short converging intakes are difficult to measure accurately. The proximity of the measurement section to the intake entrance admits large uncertainties related to asymmetry of the velocity profile, swirl, and turbulence. Existing turbine performance codes [10, 24] do not address this special case and published literature is largely silent on rigorous evaluation of uncertainties associated with this measurement context. The American Society of Mechanical Engineers (ASME) Committee investigated the use of Acoustic transit time (ATT), Acoustic scintillation (AS), and Current meter (CM) in a short converging intake at the Kootenay Canal Generating Station in 2009. Based on their findings, a standardized uncertainty analysis (UA) framework for velocity-area method (specifically for CM measurements) is presented in this paper given the fact that CM is still the most fundamental and common type of measurement system. Typical sources of systematic and random errors associated with CM measurements are investigated, and the major sources of uncertainties associated with turbulence and velocity fluctuations, numerical velocity integration technique (bi-cubic spline), and the number and placement of current meters are being considered for an evaluation. Since the velocity measurements in a short converging intake are associated with complex nonlinear and time varying uncertainties (e.g., Reynolds stress in fluid dynamics), simply applying the law of propagation of uncertainty is known to overestimate the measurement variance while the Monte Carlo method does not. Therefore, a pseudo-Monte Carlo simulation method (random flow generation technique [8]) which was initially developed for the purpose of establishing upstream or initial conditions in the Large-Eddy Simulation (LES) and the Direct Numerical Simulation (DNS) is used to statistically determine uncertainties associated with turbulence and velocity fluctuations. This technique is then combined with a bi-cubic spline interpolation method which converts point velocities into a continuous velocity distribution over the measurement domain. Subsequently the number and placement of current meters are simulated to investigate the accuracy of the estimated flow rates using the numerical velocity-area integration method outlined in ISO 3354 [12]. The authors herein consider that statistics on generated flow rates processed with bi-cubic interpolation and sensor simulations are the combined uncertainties which already accounted for the effects of all those three uncertainty sources. A preliminary analysis based on the current meter data obtained through an upgrade acceptance test of a single unit located in a mainstem plant has been presented.

Smith, Brennan T↗

Quantum-authenticated clock signal

The present disclosure is directed to a system and method of distributing time information to enable synchronization in an authenticated manner via a quantum channel. A source device may transmit a timing signal, T on a communication channel from the source device to a receiver device. The timing signal T may be include a time or times stored in memory or calculated using a previously agreed upon formula. The method may include transmitting a quantum system Q from the source device to the receiver device. The quantum system may be prepared in a randomly chosen state and may be measured by the receiver device in a randomly chosen measurement basis.

47 OTHER INSTRUMENTATION↗

A Synthetic Transcription Factor and Core Promoter System in Picochlorum renovo Enables Tunable Gene Expression

Picochlorum renovo is a recently characterized microalga of industrial interest. Its rapid growth rate, and high temperature and salinity tolerances make P. renovo an attractive candidate for industrial scale cultivation and downstream production of sustainable fuels and chemicals. Currently, genetic tools for many non-model microalgae are limited and would greatly benefit from an orthogonal gene expression system to bypass host regulation. Additionally, the engineering of complex metabolic pathways in eukaryotic organisms to optimize growth or biosynthesize high value products often requires tunable expression of each gene in a pathway. Here we explore a tunable orthogonal gene expression system using a synthetic transcription factor (sTF) and core promoters (CPs) conferring expression of the fluorescent protein mCherry to quantify protein expression. The sTF paired with the relevant binding site (BS) led to an ~5X increase in reporter gene expression compared to the native RuBisCo promoter, however had limited tunability with increasing BS number. Quantification of mCherry expression under 34 different CPs paired with the sTF and BS showed an order of magnitude of expression tunability. Future work with this system will entail generation of an overexpression library via random integration of the relevant BS in an sTF expressing P. renovo strain. With this sTF and CP system we aim to greatly improve growth rates and product titers in photosynthetic organisms, while also providing a potentially universal gene expression system for microalgae.

algae↗

Combustion control using spiking neural networks

A system that controls a combustion engine stores network vectors in a memory that represent diverse and distinct spiking neural networks. The system decodes the network vectors and trains and evaluates the spiking neural networks. The system duplicates selected network vectors and crosses-over the duplicated network vectors that represent modified spiking neural networks. The system mutates the crossed-over duplicated network vectors by randomly modifying one or more portions of the crossing-over duplicated network vectors. The system meter exhaust gas into an intake manifold when an engine temperature exceeds a threshold, an engine load exceeds a threshold, an engine's rotation-per-minute rate exceeds a threshold, and a fuel flow exceeds a threshold. The system modifies fuel flow into an engine's combustion chamber on a cycle-to-cycle basis by the trained spiking neural network.

Puente, Brian P. Maldonado↗

Pseudo-Random Number Generators

Package features comprehensive selection of probabilistic distributions. Monte Carlo simulations resorted to whenever systems studied not amenable to deterministic analyses or when direct experimentation not feasible. Random numbers having certain specified distribution characteristic integral part of simulations. Package consists of collector of "pseudorandom" number generators for use in Monte Carlo simulations.

Howell, L. W.↗

Advanced Water Vapor Lidar Detection System

In the present water vapor lidar system, the detected signal is sent over long cables to a waveform digitizer in a CAMAC crate. This has the disadvantage of transmitting analog signals for a relatively long distance, which is subjected to pickup noise, leading to a decrease in the signal to noise ratio. Generally, errors in the measurement of water vapor with the DIAL method arise from both random and systematic sources. Systematic errors in DIAL measurements are caused by both atmospheric and instrumentation effects. The selection of the on-line alexandrite laser with a narrow linewidth, suitable intensity and high spectral purity, and its operation at the center of the water vapor lines, ensures minimum influence in the DIAL measurement that are caused by the laser spectral distribution and avoid system overloads. Random errors are caused by noise in the detected signal. Variability of the photon statistics in the lidar return signal, noise resulting from detector dark current, and noise in the background signal are the main sources of random error. This type of error can be minimized by maximizing the signal to noise ratio. The increase in the signal to noise ratio can be achieved by several ways. One way is to increase the laser pulse energy, by increasing its amplitude or the pulse repetition rate. Another way, is to use a detector system with higher quantum efficiency and lower noise, on the other hand, the selection of a narrow band optical filter that rejects most of the day background light and retains high optical efficiency is an important issue. Following acquisition of the lidar data, we minimize random errors in the DIAL measurement by averaging the data, but this will result in the reduction of the vertical and horizontal resolutions. Thus, a trade off is necessary to achieve a balance between the spatial resolution and the measurement precision. Therefore, the main goal of this research effort is to increase the signal to noise ratio by a factor of 10 over the current system, using a newly evaluated, very low noise avalanche photo diode detector and constructing a 10 MHz waveform digitizer which will replace the current CAMAC system.

Elsayed-Ali, Hani↗

Topological defects from doping and quenched disorder in artificial ice systems

We examine the ice-rule obeying and ice-rule breaking vertices in an artificial spin ice system created using magnetic vortices in type-II superconductors with nanostructured pinning arrays. We show that this system can be doped by changing the external field to move the number of vortices away from commensurability and create sites that contain two or zero vortices. For a square ice, the doping leads to the formation of a grain boundary of vertices that do not obey the ice rules. In commensurate systems where the ice rules are obeyed, we can introduce random disorder at the individual pinning sites to create regions where vortices may not be able to flip from one side of the trap to another. For weak disorder, all of the vertices still obey the ice rules, while at intermediate levels of disorder we find grain boundaries of vertices which do not obey the ice rules. For strong disorder it is possible to create isolated paired vertices that do not obey the ice rules. In summary, we have shown that an artificial square ice can be created using vortices in a type-II superconductor interacting with a periodic array of pinning sites where each site has a double well potential. By defining the direction of the effective spin according to the side of the double well occupied by the vortex, we find that this system obeys the ice rules for square ice. We add disorder to the system in the form of randomness of the height of the potential barrier at the center of the well, and obtain vertex configurations using a rotating drive protocol which is similar to the shaking ac magnetic field used in nanomagnetic systems. For weak disorder the entire system still obeys the square ice rules. For intermediate disorder, ice-rule breaking vertices appear and form grain boundaries, while for strong disorder there are both gain boundaries and isolated paired defects. In a system with uniform potential barrier heights, we introduce disorder by moving away from commensurability and creating Home pinning sites that contain two or zero vortices. In this case we find grain boundaries that emanate from the defect site and span the sample.

36 MATERIALS SCIENCE↗

Fluctuation theorem in driven nonthermal systems with quenched disorder

We demonstrate that the fluctuation theorem of Evans and Searles can be used to characterize the class of dynamics that arises in nonthermal systems of collectively interacting particles driven over random quenched disorder. By observing the frequency of entropy-destroying trajectories, we show that there are specific dynamical regimes near depinning in which this theorem holds. Hence the fluctuation theorem can be used to characterize a significantly wider class of non-equilibrium systems than previously considered. We discuss how the fluctuation theorem could be tested in specific systems where noisy dynamics appear at the transition from a pinned to a moving phase such as in vortices in type-II superconductors, magnetic domain walls, and dislocation dynamics.

36 MATERIALS SCIENCE↗

Power spectrum and form factor in random diagonal matrices and integrable billiards

Triggered by a controversy surrounding a universal behavior of the power spectrum in quantum systems exhibiting regular classical dynamics, we focus on a model of random diagonal matrices (RDM), often associated with the Poisson spectral universality class, and examine how the power spectrum and the form factor get affected by two-sided truncations of RDM spectra. Having developed a nonperturbative description of both statistics, we perform their detailed asymptotic analysis to demonstrate explicitly how a traditional assumption (lying at the heart of the controversy) – that the power spectrum is merely determined by the spectral form factor – breaks down for truncated spectra. This observation has important consequences as we further argue that bounded quantum systems with integrable classical dynamics are described by heavily truncated rather than complete RDM spectra. High-precision numerical simulations of semicircular and irrational rectangular billiards lend independent support to these conclusions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE EVOLUTION OF STELLAR VELOCITY DISPERSION DURING DISSIPATIONLESS GALAXY MERGERS

Using N-body simulations, we studied the detailed evolution of central stellar velocity dispersion, {sigma}{sub *}, during dissipationless binary mergers of galaxies. Stellar velocity dispersion was measured using the common mass-weighting method as well as a flux-weighting method designed to simulate the technique used by observers. A toy model for dust attenuation was introduced in order to study the effect of dust attenuation on measurements of {sigma}{sub *}. We found that there are three principal stages in the evolution of {sigma}{sub *} in such mergers: oscillation, phase mixing, and dynamical equilibrium. During the oscillation stage, {sigma}{sub *} undergoes damped oscillations of increasing frequency. The oscillation stage is followed by a phase mixing stage during which the amplitude of the variations in {sigma}{sub *} is smaller and more chaotic than in the oscillation stage. Upon reaching dynamical equilibrium, {sigma}{sub *} assumes a stable value. We used our data regarding the evolution of {sigma}{sub *} during mergers to characterize the scatter inherent in making measurements of {sigma}{sub *} in non-quiescent systems. In particular, we found that {sigma}{sub *} does not fall below 70% nor exceed 200% of its final, quiescent value during a merger and that a random measurement of {sigma}{sub *} in such a system is much more likely to fall near the equilibrium value than near an extremum. Our toy model of dust attenuation suggested that dust can systematically reduce observational measurements of {sigma}{sub *} and increase the scatter in {sigma}{sub *} measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental nonlinear dynamical studies in cesium magneto-optical trap using time-series analysis

A magneto-optical trap of neutral atoms is essentially a dissipative quantum system. The fast thermal atoms continuously dissipate their energy to the environment via spontaneous emissions during the cooling. The atoms are, therefore, strongly coupled with the vacuum reservoir and the laser field. The vacuum fluctuations as well as the field fluctuations are imparted to the atoms as random photon recoils. Consequently, the external and internal dynamics of atoms becomes stochastic. In this paper, we have investigated the stochastic dynamics of the atoms in a magneto-optical trap during the loading process. The time series analysis of the fluorescence signal shows that the dynamics of the atoms evolves, like all dissipative systems, from deterministic to the chaotic regime. The subsequent disappearance and revival of chaos was attributed to chaos synchronization between spatially different atoms in the magneto-optical trap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Test and evaluation of the generalized gate logic system simulator

The results of the initial testing of the Generalized Gate Level Logic Simulator (GGLOSS) are discussed. The simulator is a special purpose fault simulator designed to assist in the analysis of the effects of random hardware failures on fault tolerant digital computer systems. The testing of the simulator covers two main areas. First, the simulation results are compared with data obtained by monitoring the behavior of hardware. The circuit used for these comparisons is an incomplete microprocessor design based upon the MIL-STD-1750A Instruction Set Architecture. In the second area of testing, current simulation results are compared with experimental data obtained using precursors of the current tool. In each case, a portion of the earlier experiment is confirmed. The new results are then viewed from a different perspective in order to evaluate the usefulness of this simulation strategy.

Miner, Paul S.↗

Avalanches and many-body resonances in many-body localized systems

Here we numerically study both the avalanche instability and many-body resonances in strongly disordered spin chains exhibiting many-body localization (MBL). Finite-size systems behave like MBL within the MBL regimes, which we divide into the asymptotic MBL phase and the finite-size MBL regime; the latter regime is, however, thermal in the limit of large systems and long times. In both Floquet and Hamiltonian models, we identify some landmarks within the MBL regimes. Our first landmark is an estimate of where the MBL phase becomes unstable to avalanches, obtained by measuring the slowest relaxation rate of a finite chain coupled to an infinite bath at one end. Our estimates indicate that the actual MBL-to-thermal phase transition occurs much deeper in the MBL regimes than has been suggested by most previous studies. Our other landmarks involve systemwide many-body resonances: We find that the effective matrix elements producing eigenstates with systemwide many-body resonances are enormously broadly distributed. This broad distribution means that the onset of such resonances in typical samples occurs quite deep in the MBL regimes, and the first such resonances typically involve rare pairs of eigenstates that are farther apart in energy than the minimum gap. Thus we find that the resonance properties define two landmarks that divide the MBL regimes of finite-size systems into three subregimes: (i) at strongest randomness, typical samples do not have any eigenstates that are involved in systemwide many-body resonances; (ii) there is a substantial intermediate subregime where typical samples do have such resonances but the pair of eigenstates with the minimum spectral gap does not, so the size of the minimum gap agrees with expectations from Poisson statistics; and (iii) in the weaker randomness subregime, the minimum gap is larger than predicted by Poisson level statistics because it is involved in a many-body resonance and thus subject to level repulsion. Nevertheless, even in this third subregime, all but a vanishing fraction of eigenstates remain nonresonant and the system thus still appears MBL in most respects. Based on our estimates of the location of the avalanche instability, it might be that the MBL phase is only part of subregime (i) and the other subregimes are entirely in the thermal phase, even though they look localized in most respects, so are in the finite-size MBL regime.

36 MATERIALS SCIENCE↗

The Dominant Influencer of Voltage Fluctuation (DIVF) for Power Distribution System

Variability in power generation at multiple consumer owned renewable energy sources can cause random voltage fluctuations, which may result in voltage violations at multiple nodes in a power distribution system. Traditional methods of voltage control are ineffective to address fast voltage variations. New dynamic methods of voltage control using end user devices can significantly benefit from the knowledge of the dominant influencer of voltage fluctuation (DIVF). This paper introduces information theoretic metrics to identify DIVF for every node in the power distribution system. A node can be DIVF due to its location in the distribution system and its capacity to generate and change its power. Use of traditional power flow algorithms to identify the DIVF is computationally complex which limits their use in real-time applications. In this work, information theoretic indicators of the DIVF are computed analytically in a computationally efficient manner, and their effectiveness to identify the DIVF is tested using the IEEE 69 node test system. From simulations, it is illustrated that differential entropy, Kullback-Leibler distance and Frechet distance are effective indicators of the DIVF and can successfully identify the most influential nodes providing the foundation for intelligent voltage control.

24 POWER TRANSMISSION AND DISTRIBUTION↗