Search NASA⌕ Search

SEARCH · Search NASA

Results for “shells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

The structure and photovoltaic properties of double-shell TiO{sub 2}/ZnSe/CdSe nanocable arrays synthesized by using TiO{sub 2}/ZnO nanocables template

Highlights: • The ZnSe/CdSe/TiO{sub 2} nanocable arrays were synthesized. • The TiO{sub 2}/ZnSe/CdSe double shell electrode shown better photovoltaic performance. • A stepwise band alignment structure was constructed in the TiO{sub 2}/ZnSe/CdSe electrode. • A highest power conversion efficiency of 1.33% has been obtained. - Abstract: A simple method was reported for the first time to synthesize ZnSe/CdSe co-sensitized TiO{sub 2} nanorod arrays. TiO{sub 2}/ZnO nanocables were firstly prepared by magnetic sputtering ZnO films on TiO{sub 2} nanorod arrays, and the TiO{sub 2}/ZnSe nanocables were synthesized by selenization of TiO{sub 2}/ZnO nanocables with Se{sup 2−} ions. Finally, CdSe quantum dots (QDs) were electrodeposited on the TiO{sub 2}/ZnSe nanocables forming a TiO{sub 2}/ZnSe/CdSe tri-layer configuration. It is found that the tri-layer photoelectrode has a complementary effect in the light absorption, while the ZnSe shell acts as a blocking layer to retarding the interfacial recombination. Furthermore, a stepwise band alignment structure was constructed in the TiO{sub 2}/ZnSe/CdSe electrode, which greatly speeds up the transfer rate of photoexcited electrons from CdSe to TiO{sub 2}. Thus, the TiO{sub 2}/ZnSe/CdSe electrode presented better photovoltaic performance than the single shell. Through optimization the thickness of ZnSe layer in the TiO{sub 2}/ZnSe/CdSe photoelectrode, a highest power conversion efficiency of 1.33% was obtained.

36 MATERIALS SCIENCE↗

Construction of ultrathin N-doped carbon shell on LiFePO{sub 4} spheres as enhanced cathode for lithium ion batteries

Graphical abstract: N-doped carbon (N-C) coated LiFePO{sub 4} spheres have been prepared by a facile one-step spray drying method and demonstrated with high capacity and good cycling life as cathode of lithium ion batteries. - Highlights: • Construct N-C shell on LiFePO{sub 4} as enhanced cathode for LIBs. • LiFePO{sub 4}/N-C cathodes show high capacity and good cycling life. • N-C shell structure is favorable for fast electron transfer. - Abstract: Developing advanced cathode is playing a crucial role in the advancement of lithium ion batteries (LIBs). In this work, we report a novel one-step spray drying method for fabrication of N-doped carbon (N-C) coated LiFePO{sub 4} spheres forming LiFePO{sub 4}/N-C spheres composite. Thin N-C layer of about 5 nm was coating on the surface of LiFePO{sub 4} spheres. The electrochemical properties of LiFePO{sub 4}/N-C spheres composite have been thoroughly studied as cathode of LIBs. The LiFePO{sub 4}/N-C spheres composite delivers discharge capacities of 160, 143 and 115 mAh g{sup −1} at 1 C, 5 C and 20 C, respectively, much better than unmodified LiFePO{sub 4} cathode. A high discharge capacity of 159 mAh g{sup −1} is preserved with 99% capacity retention after 1000 cycles at 1 C. The enhanced performance is due to the introduction of N-C shell with improved electrical conductivity and structural stability.

36 MATERIALS SCIENCE↗

Conformal construction of polyaniline shell on cobalt oxide nanoflake core for enhanced Li ion storage

Highlights: • Construct non-axial polyaniline shell on Co{sub 3}O{sub 4} nanoflake core. • Non-axial core/shell arrays show enhanced Li storage properties. • Ultrathin PANI shell is favorable for fast ion and electron transfer. - Abstract: It is of great importance to controllably synthesize non-axial metal oxide/conducting polymers arrays for construction of high-performance electrochemical devices. In this work, we develop a facile electro-polymerization method to conformally coat interwoven polyaniline (PANI) shell on the preformed porous Co{sub 3}O{sub 4} nanoflakes forming non-axial Co{sub 3}O{sub 4}/PANI core/shell arrays. Uniform conductive PANI network and high porosity are realized in the non-axial core/shell arrays. As active materials for Li ion storage, the Co{sub 3}O{sub 4}/PANI core/shell arrays show superior high-rate performance including lower polarization, higher reactivity and better cycling life, as compared to the unmodified Co{sub 3}O{sub 4} nanoflake arrays. The capacity deterioration of the Co{sub 3}O{sub 4}/PANI arrays is restricted to a very lower level with a capacity of 871 mAh g{sup −1} at 0.25 A g{sup −1} after 100 cycles, better than the Co{sub 3}O{sub 4} counterpart (669 mAh g{sup −1} at 0.25 A g{sup −1}). This non-axial combination opens up a new door for developing advanced composite arrays for energy storage.

36 MATERIALS SCIENCE↗

Cross-shell excitations in {sup 30}Al and {sup 30}Si at high spin.

Yrast and near-yrast states in {sup 30}Al and {sup 30}Si have been populated to high spin with the {sup 18}O + {sup 14}C fusion-evaporation reaction in inverse kinematics. The level schemes for these two isobars have been extended up to J {approx} 9 {h_bar} at 9.4 and 15.5 MeV, respectively. Their decay schemes indicate that cross-shell excitations dominate at high spin, where negative-parity structures exist. Positive-parity states are compared to the results of shell-model calculations using the USD, USDA, and USDB effective interactions. The negative-parity levels are compared to predictions of the WBP interaction and the recently-developed WBP-a Hamiltonian, by allowing 1p-1h excitations to fp-shell orbitals. The results suggest that single-neutron excitations to the 0f7/2 orbital play a significant role at high spin.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence of off-shell Higgs boson production from ZZ leptonic decay channels and constraints on its total width with the ATLAS detector

This Letter reports on a search for off-shell production of the Higgs boson using 139 fb —1 of $pp$ collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS detector at the Large Hadron Collider. The signature is a pair of $\overline{Z}$ bosons, with contributions from both the production and subsequent decay of a virtual Higgs boson and the interference of that process with other processes. The two observable final states are $\overline{Z}$ $\overline{Z}$ → 4$\ell$ and $\overline{Z}$ $\overline{Z}$ → 2$\ell$2$ν$ with $\ell$ = $e$ or $μ$. In the $\overline{Z}$ $\overline{Z}$ → 4$\ell$ final state, a dense Neural Network is used to enhance analysis sensitivity with respect to matrix element-based discrimination. The backgroundonly hypothesis is rejected with an observed (expected) significance of 3.3 (2.2) standard deviations, representing experimental evidence for off-shell Higgs boson production. Assuming that no new particles enter the production of the virtual Higgs boson, its total width can be deduced from the measurement of its off-shell production cross-section. The measured total width of the Higgs boson is ${4.5}_{—2.5}^{+3.3}$ MeV, and the observed (expected) upper limit on the total width is found to be 10.5 (10.9) MeV at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Constraining off-shell Higgs boson production and the Higgs boson total width using WW → ℓνℓν final states with the ATLAS detector

A measurement of off-shell Higgs boson production is performed in the H* → WW channel. The measurement uses a proton–proton collision dataset with an integrated luminosity of 140 fb -1 collected at a centre-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Final states in which both W bosons decay leptonically are targeted, and events are categorised based on the flavour of the final-state leptons, the jet multiplicity, and the output of neural network-based classifiers. The data are found to be compatible with the Standard Model expectation. An observed (expected) upper bound on the 95 % symmetric confidence level interval is set on the rate of off-shell Higgs boson production at a value of 3.4 (4.4) times the Standard Model prediction. These results are combined with the results from the measurement of on-shell Higgs boson production in the same final states to obtain an observed (expected) upper bound at 95 % confidence level on the Higgs boson total width of 13.1 (17.3) MeV.

Aad, G. [Aix-Marseille Univ., Marseille (France)] ↗

No evidence of a reduction in the dipole polarisability at shell closures

Photoabsorption reactions have a long and productive history as probes of the response of nuclei to electromagnetic fields. In recent years, there has been a suggestion that the dipole polarisability may be reduced at shell closures, potentially due to the reduced level density. In the current paper, more recent photoabsorption strengths are reanalysed including nuclei on closed proton shells to search for a similar reduction. The previously reported reduction is not reproduced. We conclude that the previously observed reduction may be due to incomplete evaluations of the photoabsorption due to missing cross section contributions and experimental artefacts. More experimental data are necessary to draw a firm conclusion about whether shell effects persist into high excitation energies, especially data which can obviate any systematic effects and look at relative photoabsorption strengths between nuclei.

Giant dipole response↗

Growth and structural transitions of core-shell nanorods in nanocrystalline Al-Ni-Y

Unique nanorod precipitates with a core-shell structure are found to nucleate from the grain boundaries of a bulk nanocrystalline Al-Ni-Y alloy fabricated via powder consolidation, contributing significantly to stabilization and strengthening. The local structure, chemistry, and evolution of these features during annealing are reported here. In the as-consolidated state, the nanorods can be either structurally ordered or disordered, yet a consistent chemical patterning is found where the core is primarily Al plus C while the shell is enriched with Y. As annealing time increases, more nanorods transform to an ordered structure as they coarsen while the core composition remains unchanged. In contrast, the shell chemistry transitions from Y-rich to Ni-rich with longer annealing treatments, most likely due to the different diffusivities of Y and Ni in Al. Furthermore, a spatial and chemical correlation between the nanorods and amorphous complexions is observed, suggesting that these complexions serve as preferential nucleation sites.

36 MATERIALS SCIENCE↗

Chitosan-shelled oxygen-loaded nanodroplets abrogate hypoxia dysregulation of human keratinocyte gelatinases and inhibitors: New insights for chronic wound healing

Background: : In chronic wounds, efficient epithelial tissue repair is hampered by hypoxia, and balances between the molecules involved in matrix turn-over such as matrix metalloproteinases (MMPs) and tissue inhibitors of metalloproteinases (TIMPs) are seriously impaired. Intriguingly, new oxygenating nanocarriers such as 2H,3H-decafluoropentane-based oxygen-loaded nanodroplets (OLNs) might effectively target chronic wounds. Objective: : To investigate hypoxia and chitosan-shelled OLN effects on MMP/TIMP production by human keratinocytes. Methods: : HaCaT cells were treated for 24 h with 10% v/v OLNs both in normoxia or hypoxia. Cytotoxicity and cell viability were measured through biochemical assays; cellular uptake by confocal microscopy; and MMP and TIMP production by enzyme-linked immunosorbent assay or gelatin zymography. Results: : Normoxic HaCaT cells constitutively released MMP-2, MMP-9, TIMP-1 and TIMP-2. Hypoxia strongly impaired MMP/TIMP balances by reducing MMP-2, MMP-9, and TIMP-2, without affecting TIMP-1 release. After cellular uptake by keratinocytes, nontoxic OLNs abrogated all hypoxia effects on MMP/TIMP secretion, restoring physiological balances. OLN abilities were specifically dependent on time-sustained oxygen diffusion from OLN core. Conclusion: : Chitosan-shelled OLNs effectively counteract hypoxia-dependent dysregulation of MMP/TIMP balances in human keratinocytes. Therefore, topical administration of exogenous oxygen, properly encapsulated in nanodroplet formulations, might be a promising adjuvant approach to promote healing processes in hypoxic wounds. - Highlights: • Hypoxia impairs MMP9/TIMP1 and MMP2/TIMP2 balances in HaCaT human keratinocytes. • Chitosan-shelled oxygen-loaded nanodroplets (OLNs) are internalised by HaCaT cells. • OLNs are not toxic to HaCaT cells. • OLNs effectively counteract hypoxia effects on MMP/TIMP balances in HaCaT cells. • OLNs appear as promising and cost-effective therapeutic tools for hypoxic wounds.

60 APPLIED LIFE SCIENCES↗

Impact of different catalysis supported by oyster shells on the pyrolysis of tyre wastes in a single and a double fixed bed reactor

Highlights: • An innovative way in the disposal of tyre wastes with energy recovery by pyrolysis is proposed. • Performance of catalysts is improved by spreading them over layers of oyster shells. • One or two levels of supported catalytic beds may favor the quantity and/or the calorific value of the pyrolysis by-products. - Abstract: The treatment and disposal of tyres from vehicles has long been of considerable environmental importance. Studies have been undertaken to reduce their environmental impact. In this study, an alternative gas was produced from automobile tyre wastes by the means of a controlled pyrolysis. To do so, a novel catalytic system was designed with the aim of increasing the rate of conversion and improving the quality of the pyrolysis products. This work aimed also to reduce the severity of the overall reactions, by using powder catalysts (MgO, Al{sub 2}O{sub 3}, CaCO{sub 3}, and zeolite ZSM-5) uniformly distributed on two layers of oyster shells (OS) particles. The catalyst/tyres mass ratio was kept for all the tests at 1/30. The pyrolysis reactor was maintained at 500 °C and the influence of each catalyst and of the number of shell beds (0, 1 or 2), on the yield and composition of the derived products, was examined. The gas yields could contribute by 1.2% of total consumption in Tunisia. Furthermore, some combinations could upgrade the derived gas and made it possible to use it as such or with the minimum of post-treatment. It was found that, with the use of supported catalyst, the gas produced is 45% greater compared to classical thermal pyrolysis. The Heating value of the produced gas was also improved by the use of supported catalysts; it was found 16% greater with the use of Al{sub 2}O{sub 3}/OS compared to non-catalytic pyrolysis. When compared to the gas obtained from only one catalytic supported bed, the sulfur content was reduced by 80% with the use of CaCO{sub 3}/OS on two catalytic beds.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Local Electric Field Effects on Water Dissociation in Bipolar Membranes Studied Using Core–Shell Catalysts

The local electric field strength is thought to affect the rate of water dissociation (WD) in bipolar membranes (BPMs) at the catalyst–nanoparticle surfaces. Here, we study core–shell nanoparticles, where the core is metallic, semiconducting, or insulating, to understand this effect. The nanoparticle cores were coated with a WD catalyst layer (TiO2 or HfO2) via atomic layer deposition (ALD), and the morphology was imaged with transmission electron microscopy. Irrespective of the core material, these core–shell catalysts displayed comparable WD overpotentials at optimal mass loading, despite the hypothesized differences in the electric field strength across the catalyst particle suggested by continuum electrostatic simulations. Substantial atomic interdiffusion between the core and shell was ruled out by X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and diffuse reflectance optical measurements. However, the optimal mass loading of catalyst was roughly 1 order of magnitude higher for the conductive and high dielectric core materials than for the low dielectric insulating cores. These findings are consistent with the hypothesis that electric field screening within the core material focuses the electric field drop between particles such that larger film thicknesses can be tolerated. Collectively, these data support the idea that it is the local electric field at the molecular level that controls proton-transfer rates and that the metal core/dielectric-shell constructs introduced here modulate that field. Further materials and synthetic design may enable optimization of the electric field strength across the proton-transfer trajectory at the material surface.

Sarma, Prasad V↗

A Facile Method for Synthesizing Dendritic Core–Shell Structured Ternary Metallic Aerogels and Their Enhanced Electrochemical Performances

Currently, three dimensional self-supported metallic structures are attractive for their unique properties of high porosity, low density, excellent conductivity etc. that promote their wide application in fuel cells. Here, for the first time, we report a facile synthesis of dendritic core-shell structured Au/Pt 3 Pd ternary metallic aerogels via a one-pot self-assembly gelation strategy. The as-prepared Au/Pt 3 Pd ternary metallic aerogels demonstrated superior electrochemical performances toward oxygen reduction reaction compared to commercial Pt/C. The unique dendritic core-shell structures, Pt 3 Pd alloyed shells and the cross-linked network structures are beneficial for the electrochemical oxygen reduction reaction performances of the Pt-based materials via the electronic effect, geometric effect and synergistic effect. Lastly, this strategy of fabrication of metallic hydrogels and aerogels as well as their exceptional properties hold great promise in a variety of applications.

36 MATERIALS SCIENCE↗

Identification of Second Shell Coordination in Transition Metal Species Using Theoretical XANES: Example of Ti–O–(C, Si, Ge) Complexes

X-ray absorption near-edge structure (XANES) is a common technique for elucidating oxidation state and first shell coordination geometry in transition metal complexes, among many other materials. However, the structural information obtained from XANES is often limited to the first coordination sphere. In this study, we show how XANES can be used to differentiate between C, Si, and Ge in the second coordination shell of Ti–O–(C, Si, Ge) molecular complexes based on differences in their Ti K-edge XANES spectra. Experimental spectra were compared with theoretical spectra calculated using density functional theory structural optimization and ab initio XANES calculations. The unique features for second shell C, Si, and Ge present in the Ti K pre-edge XANES are attributed to the interaction between the Ti center and the O–X (X = C, Si, or Ge) antibonding orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Solvation Shells of Lithium Ions in Glyme-Based Electrolytes

Glymes have been extensively studied as solvents for Li-battery electrolytes, most recently in equimolar mixtures with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), due to their ability to form stable solvates. However, directly quantifying free and coordinated glyme molecules in the liquid state has been challenging due to several experimental limitations. Here, in this work, new vibrational probes are demonstrated for studying the solvation structures of diglyme and triglyme in LiTFSI electrolytes. These IR probes make use of an amine group to report the solvation state of glymes at salt-to-solvent molar ratios ranging from 1:5 to 1:10. Characterization of the thermodynamic properties of the solvent exchange occurring in the first solvation shell of lithium ions (Li + ) showed an equilibrium constant for these probes close to unity at room temperature. This result demonstrates that the probes exhibit a similar solvation behavior to their glyme analogue. Concentration dependence studies also revealed a lack of significant amounts of contact ion pairs at the studied concentrations. Moreover, the first solvation shell of Li + appears to be formed by two partially chelating glyme molecules, establishing that even triglyme with multiple chelation sites does not fully coordinate the cation. Complementary molecular dynamics (MD) simulations agree with the experimental results and suggest that at these concentrations, TFSI – predominantly forms solvent-separated ion pairs. However, the simulations do not properly capture the partial solvation structure of the glyme molecules in the solvation shell of Li + as derived from the experiments.

electrolytes↗

Hollow Au Nanosphere-Cu 2 O Core–Shell Nanostructures with Controllable Core Surface Morphology

Design of metal-semiconductor interfaces and heterostructures is of strong interest for various catalytic applications including photocatalysis. Here, a series of hollow Au nanosphere (HGN)-Cu 2 O core-shell nanostructures with varying core surface rugosities are synthesized and investigated for possible photocatalytic applications. HGN surface rugosity is tuned by pH modification during galvanic exchange, and carboxyl groups are utilized as coordination sites to deposit uniform Cu 2 O shells onto the gold surfaces. Final core-shell structures are verified by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), and X-ray diffraction (XRD). Information regarding chemical state and electronic band structure is acquired by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Ultrafast transient absorption (TA) reveals that charge separation in bumpy HGN (bHGN)-Cu 2 O may effectively provide longer-lived photoexcited carriers, offering great potential for utilization in advanced photocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tetragonal-Like Phase in Core–Shell Iron Iron-Oxide Nanoclusters

Two sizes of iron/iron-oxide (Fe/Fe-oxide) nanoclusters (NCs) of 10 and 35 nm diameters were prepared using a cluster deposition technique. Both these NCs displayed X-ray diffraction (XRD) peaks due to body-centered cubic (BCC) Fe 0 and magnetite-like phase. 57 Fe Mössbauer spectroscopy measurements confirmed (a) the core–shell nature of the NCs, (b) the Fe-oxide shell to be nanocrystalline and partially oxidized beyond magnetite, and (c) the Fe-oxide spins are significantly canted. In addition to the BCC Fe and magnetite-like phases, a phase similar to tetragonal σ-Fe-Cr (8% Cr) was clearly evident in the larger NC, based on XRD. The origin of the tetragonal-like phase in the larger NC could be due to significant distortion of the Fe 0 core lattice planes; subtle peaks due to this phase were also apparent in the smaller NC. Unambiguous evidence for the presence of such a phase was not clear from X-ray photoelectron spectroscopy, vibrating sample magnetometry, X-ray magnetic circular dichroism, or transmission electron microscopy. 57 Fe Mössbauer spectroscopy, however, provided support for a non-BCC Fe 0 phase in the strongest sixth and the first resonance lines of the Fe 0 sextet. So to our knowledge, this is the first report of a tetragonal-like phase in the Fe/Fe-oxide core–shell systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dye Encapsulation in Fluorescent Core–Shell Silica Nanoparticles as Probed by Fluorescence Correlation Spectroscopy

Synthetic advances in the formation of ultrasmall (<10 nm) fluorescent poly(ethylene glycol)-coated (PEGylated) core–shell silica nanoparticles (SNPs), enabling improved particle size and surface chemical property control, have led to successful clinical translation of SNPs as diagnostic probes in oncology. Despite the success of such probes, details of the dye incorporation and resulting silica architecture are still poorly understood. Here, we employ afterpulse-corrected fluorescence correlation spectroscopy (FCS) to monitor fast fluorescence fluctuations (lag times <10 –5 s) of the negatively charged cyanine dye Cy5 as a probe to study such details for dye encapsulation in 5 nm silica cores of PEGylated core–shell SNPs (C dots). Upon deposition of additional silica shells over the silica core, we find that the amplitude of photoinduced cis–trans isomerization decreases, suggesting that the Cy5 dyes are located near or on the surface of the original SNP cores. In combination with time-correlated fluorescence decay measurements, we deduce radiative and nonradiative rates of the Cy5 dye in these particles. Finally, results demonstrate that FCS is a well-suited tool to investigate aspects of the photophysics of fluorescent nanoparticles, and that conformational changes of cyanine dyes like Cy5 are excellent indicators for the local dye environment within ultrasmall SNPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Larger Solvation Shells in a LiFSI Salt Solution for Enhanced Li + Transport

Electrodes and electrolytes in Li-ion batteries (LIBs) are crucial for their electrochemical performance, and fabricating these materials to achieve the desired properties for improved efficiency is challenging. A recent study published in Nature ( Nature 2024, 627, 101−107) outlined guidelines for designing an electrolyte using fluoroacetonitrile (FACN), a small-molecule solvent with low solvation energy. This characteristic enables the formation of an anion-rich inorganic interphase in a 1.3 M lithium bis(fluorosulfonyl)imide (LiFSI) solution, facilitating higher ionic conductivity, even at low temperatures. The formation of a ligand channel was postulated and demonstrated in the simulation due to the attraction of small solvent molecules from the secondary solvation shell to the Li + ion in the primary solvation shell, thereby enhancing Li + transport. While that study primarily focused on Li + ion behavior in LIBs, the behavior of FACN in solutions with different lithium salts and what makes LiFSI in FACN outperform other systems remain to be explored. In conclusion, using an experimental technique sensitive to FACN molecules, here we directly observe formation of larger solvation shells in a LiFSI solution compared to the Li salts with different anions, consistent with the postulated ligand-channel-mechanism and potentially paving the way to achieving enhanced ionic conductivity and energy density during LIB operation.

Batteries↗