Search NASA⌕ Search

SEARCH · Search NASA

Results for “stream flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Quantitatively Monitoring Bubble-Flow at a Seep Site Offshore Oregon: Field Trials and Methodological Advances for Parallel Optical and Hydroacoustical Measurements

Two lander-based devices, the Bubble-Box and GasQuant-II, were used to investigate the spatial and temporal variability and total gas flow rates of a seep area offshore Oregon, United States. The Bubble-Box is a stereo camera–equipped lander that records bubbles inside a rising corridor with 80 Hz, allowing for automated image analyses of bubble size distributions and rising speeds. GasQuant is a hydroacoustic lander using a horizontally oriented multibeam swath to record the backscatter intensity of bubble streams passing the swath plain. The experimental set up at the Astoria Canyon site at a water depth of about 500 m aimed at calibrating the hydroacoustic GasQuant data with the visual Bubble-Box data for a spatial and temporal flow rate quantification of the site. For about 90 h in total, both systems were deployed simultaneously and pressure and temperature data were recorded using a CTD as well. Detailed image analyses show a Gaussian-like bubble size distribution of bubbles with a radius of 0.6–6 mm (mean 2.5 mm, std. dev. 0.25 mm); this is very similar to other measurements reported in the literature. Rising speeds ranged from 15 to 37 cm/s between 1- and 5-mm bubble sizes and are thus, in parts, slightly faster than reported elsewhere. Bubble sizes and calculated flow rates are rather constant over time at the two monitored bubble streams. Flow rates of these individual bubble streams are in the range of 544–1,278 mm 3 /s. One Bubble-Box data set was used to calibrate the acoustic backscatter response of the GasQuant data, enabling us to calculate a flow rate of the ensonified seep area (~1,700 m 2 ) that ranged from 4.98 to 8.33 L/min (5.38 × 10 6 to 9.01 × 10 6 CH 4 mol/year). Such flow rates are common for seep areas of similar size, and as such, this location is classified as a normally active seep area. For deriving these acoustically based flow rates, the detailed data pre-processing considered echogram gridding methods of the swath data and bubble responses at the respective water depth. The described method uses the inverse gas flow quantification approach and gives an in-depth example of the benefits of using acoustic and optical methods in tandem.

54 ENVIRONMENTAL SCIENCES↗

Mercury removal from coal by leaching with SO{sub 2}

This paper is about the pretreatment of coal to remove mercury content prior to coal combustion. The minute amount of mercury in Pittsburgh No. 8 coal (0.177 ppm) was removed by flowing a gas stream containing 10% oxygen and 1000 ppm SO{sub 2} into a coal-water slurry at 30 mL/s. A total of 50 g of 35-65 mesh coal was leached each time in 500 mL of solution. The temperature was varied from 50 to 80{sup o}C and the initial solution pH varied at 5.7, 1.8, and 1.5. It was found that the mercury removal increased from 44.2% at 50{sup o}C to 88.6% at 75{sup o}C at the natural pH (5.7) and after 3 h of reaction time. The pyrite conversions were much lower than those of mercury. Both the mercury and pyrite removals increased as the pH decreased at 71{sup o}C. Mercury removal was high enough to consider the application of this technology to a commercial process. 10 refs., 11 figs.

01 COAL, LIGNITE, AND PEAT↗

Effect of gas velocity on the weakly nonlinear instability of a planar viscous sheet

A weakly nonlinear spatial instability of a two-dimensional planar viscous sheet for sinuous disturbances in a co-flowing inviscid gas stream is investigated theoretically, with an emphasis on the effect of the surrounding gas velocity. The solutions of the second-order interface disturbances are derived and the wave deformation has been computed. The results indicate that the second-order surface disturbance of the fundamental sinuous mode is varicose, which causes the thinning and the subsequent breakup of the liquid sheet. The nonlinear behaviors of the planar sheet are quite sensitive to variations in gas-to-liquid velocity ratio. The deviation of the velocity ratio from the value of unity leads to a larger growth rate, a larger second-order initial amplitude, and a shorter breakup length, and therefore enhances the instability. The growth rates predicted by the present nonlinear analysis according to the shortest breakup length are generally smaller than the linear predictions and can better conform to the experimental measures of Barreras et al. [“Linear instability analysis of the viscous longitudinal perturbation on an air-blasted liquid sheets,” Atomization Sprays 11, 139 (2001)]. Furthermore, the wave deformations of the most unstable disturbances are presented. The nonlinear instability of the planar sheet for a fixed velocity difference is performed. An equal increase of the gas and liquid velocity reduces the spatial growth rate and increases the breakup length, but generally has no influences on the second-order initial amplitude and the wavelength of the disturbance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical investigation of plasma edge transport and limiter heat fluxes in Wendelstein 7-X startup plasmas with EMC3-EIRENE

Here the results of a first systematic assessment of plasma edge transport processes for the limiter startup configuration at Wendelstein 7-X are presented. This includes an investigation of transport from intrinsic and externally injected impurities and their impact on the power balance and limiter heat fluxes. The fully 3D coupled plasma fluid and kinetic neutral transport Monte Carlo code EMC3-EIRENE is used. The analysis of the magnetic topology shows that the poloidally and toroidally localized limiters cause a 3D helical scrape-off layer (SOL) consisting of magnetic flux tubes of three different connection lengths L C . The transport in the helical SOL is governed by L C as topological scale length for the parallel plasma loss channel to the limiters. A clear modulation of the plasma pressure with L C is seen. The helical flux tube topology results in counter streaming sonic plasma flows. The heterogeneous SOL plasma structure yields an uneven limiter heat load distribution with localized peaking. Assuming spatially constant anomalous transport coefficients, increasing plasma density yields a reduction of the maximum peak heat loads from 12 MWm -2 to 7.5 MWm -2 and a broadening of the deposited heat fluxes. The impact of impurities on the limiter heat loads is studied by assuming intrinsic carbon impurities eroded from the limiter surfaces with a gross chemical sputtering yield of 2 . The resulting radiative losses account for less than 10% of the input power in the power balance with marginal impact on the limiter heat loads. It is shown that a significant mitigation of peak heat loads, 40–50%, can be achieved with controlled impurity seeding with nitrogen and neon, which is a method of particular interest for the later island divertor phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Drought resilience of the California Central Valley surface-groundwater-conveyance system

A series of drought simulations were performed for the California Central Valley using computer applications developed by the California Department of Water Resources and historical datasets representing a range of droughts from mild to severe for time periods lasting up to 60 years. Land use, agricultural cropping patterns, and water demand were held fixed at the 2003 level and water supply was decreased by amounts ranging between 25 and 50%, representing light to severe drought types. Impacts were examined for four hydrologic subbasins, the Sacramento Basin, the San Joaquin Basin, the Tulare Basin, and the Eastside Drainage. Results suggest the greatest impacts are in the San Joaquin and Tulare Basins, regions that are heavily irrigated and are presently overdrafted in most years. Regional surface water diversions decrease by as much as 70%. Stream-to-aquifer flows and aquifer storage declines were proportional to drought severity. Most significant was the decline in ground water head for the severe drought cases, where results suggest that under these scenarios the water table is unlikely to recover within the 30-year model-simulated future. However, the overall response to such droughts is not as severe as anticipated and the Sacramento Basin may act as ground-water insurance to sustain California during extended dry periods.

54 ENVIRONMENTAL SCIENCES↗

DEGRADATION ISSUES IN SOLID OXIDE CELLS DURING HIGH TEMPERATURE ELECTROLYSIS

Idaho National Laboratory (INL) is performing high-temperature electrolysis research to generate hydrogen using solid oxide electrolysis cells (SOECs). The project goals are to address the technical and degradation issues associated with the SOECs. This paper provides a summary of various ongoing INL and INL sponsored activities aimed at addressing SOEC degradation. These activities include stack testing, post-test examination, degradation modeling, and a list of issues that need to be addressed in future. Major degradation issues relating to solid oxide fuel cells (SOFC) are relatively better understood than those for SOECs. Some of the degradation mechanisms in SOFCs include contact problems between adjacent cell components, microstructural deterioration (coarsening) of the porous electrodes, and blocking of the reaction sites within the electrodes. Contact problems include delamination of an electrode from the electrolyte, growth of a poorly (electronically) conducting oxide layer between the metallic interconnect plates and the electrodes, and lack of contact between the interconnect and the electrode. INL's test results on high temperature electrolysis (HTE) using solid oxide cells do not provide a clear evidence whether different events lead to similar or drastically different electrochemical degradation mechanisms. Post-test examination of the solid oxide electrolysis cells showed that the hydrogen electrode and interconnect get partially oxidized and become non-conductive. This is most likely caused by the hydrogen stream composition and flow rate during cool down. The oxygen electrode side of the stacks seemed to be responsible for the observed degradation due to large areas of electrode delamination. Based on the oxygen electrode appearance, the degradation of these stacks was largely controlled by the oxygen electrode delamination rate. University of Utah (Virkar) has developed a SOEC model based on concepts in local thermodynamic equilibrium in systems otherwise in global thermodynamic non-equilibrium. This model is under continued development. It shows that electronic conduction through the electrolyte, however small, must be taken into account for determining local oxygen chemical potential, within the electrolyte. The chemical potential within the electrolyte may lie out of bounds in relation to values at the electrodes in the electrolyzer mode. Under certain conditions, high pressures can develop in the electrolyte just under the oxygen electrode (anode)/electrolyte interface, leading to electrode delamination. This theory is being further refined and tested by introducing some electronic conduction in the electrolyte.

08 HYDROGEN↗

Virtual Flow Simulator

Virtual Flow Simulator (VFS) is a state-of-the-art computational fluid mechanics (CFD) package that is capable of simulating multi-physics/multi-phase flows with the most advanced turbulence models (RANS, LES) over complex terrains. The flow solver is based on the Curvilinear Immersed Boundary (CURVIB) method to handle geometrically complex and moving domains. Different modules of the VFS package can provide different simulation capabilities for specific applications ranging from the fluid-structure interaction (FSI) of solid and deformable bodies, the two-phase free surface flow solver based on the level set method for ocean waves, sediment transport models in rivers and the large-scale models of wind farms based on actuator lines and surfaces. All numerical features of VFS package have been validated with known analytical and experimental data as reported in the related journal articles. VFS package is suitable for a broad range of engineering applications within different industries. VFS has been used in different projects with applications in wind and hydrokinetic energy, offshore and near-shore ocean studies, cardiovascular and biological flows, and natural streams and river morphodynamics. Over the last decade, the development of VFS has been supported and assisted with the help of various United States companies and federal agencies that are listed in the sponsor lists. In this version, VFS-Wind contains all the necessary modeling tools for wind energy applications, including land-based and offshore wind farms. VFS is highly scalable to run on either desktop computers or high performance clusters (up to 16,000 CPUs). This released version comes with a detailed user’s manual and a set of case studies designed to facilitate the learning of the various aspects of the code in a comprehensive manner. The included documentation and support material has been elaborated in a collaboration effort with Sandia National Labs under the contract DE-EE0005482. The VFS-Wind source code is distributed under the GNU General Public License (GPL 2.0), offering to the community the flexibility to use and expand the capabilities of the package. We note that future publications including academic journals that result from the use of VFS must be cited appropriately under the GPL v.2 license agreement.

Yang, Xiaolei↗

Hydrothermal Liquefaction and Upgrading of Wastewater-Grown Microalgae: 2021 State of Technology

The fiscal year (FY) 2021 State of Technology (SOT) Assessment for the hydrothermal liquefaction (HTL) of wastewater (WW)-grown microalgae and biocrude upgrading system was completed and reported here. An industrial partner, Gross-Wen Technologies (GWT), provided algae feedstock cultivated on a revolving algal biofilm (RAB) system by using the primary effluent from a water resource recovery facility (WRRF). This provided algae was tested at PNNL for HTL processing. The experimental results provided the major design basis of the HTL process of the SOT baseline case. The primary effluent of the Metropolitan Water Reclamation District (MWRD) of Greater Chicago was assumed to be the nutrients source for algae growth and the algae yield data per gallon wastewater provided by GWT were used to estimate the total algae production rate and thus the HTL conversion plant scale. Considering different cultivation technologies and wastewater streams with different flow rates and nutrients contents can be used to produce algae, this SOT assessment just provided an example case study for WW-grown algae based HTL conversion to fuels systems. A preliminary economic analysis was developed based on process simulation results. Sensitivity analysis was implemented to evaluate cost impacts of plant scales, potential cost improvements and other key factors.

54 ENVIRONMENTAL SCIENCES↗

Avoiding Conflicts between Future Freshwater Algae Production and Water Scarcity in the United States at the Energy-Water Nexus

Sustainable production of algae will depend on understanding trade-offs at the energy-water nexus. Algal biofuels promise to improve the environmental sustainability profile of renewable energy along most dimensions. In this assessment of potential US freshwater production, we assumed sustainable production along the carbon dimension by simulating placement of open ponds away from high-carbon-stock lands (forest, grassland, and wetland) and near sources of waste CO 2 . Along the water dimension, we quantified trade-offs between water scarcity and production for an ‘upstream’ indicator (measuring minimum water supply) and a ‘downstream’ indicator (measuring impacts on rivers). For the upstream indicator, we developed a visualization tool to evaluate algae production for different thresholds for water surplus. We hypothesized that maintaining a minimum seasonal water surplus would also protect river habitat for aquatic biota. Our study confirmed that ensuring surplus water also reduced the duration of low-flow events, but only above a threshold. We also observed a trade-off between algal production and the duration of low-flow events in streams. These results can help to guide the choice of basin-specific sustainability targets to avoid conflicts with competing water users at this energy-water nexus. Where conflicts emerge, alternative water sources or enclosed photobioreactors may be needed for algae cultivation.

54 ENVIRONMENTAL SCIENCES↗

Determination of Plasma Screening Effects for Thermonuclear Reactions in Laser-generated Plasmas

Due to screening effects, nuclear reactions in astrophysical plasmas may behave differently than in the laboratory. The possibility to determine the magnitude of these screening effects in colliding laser-generated plasmas is investigated theoretically, having as a starting point a proposed experimental setup with two laser beams at the Extreme Light Infrastructure facility. A laser pulse interacting with a solid target produces a plasma through the Target Normal Sheath Acceleration scheme, and this rapidly streaming plasma (ion flow) impacts a secondary plasma created by the interaction of a second laser pulse on a gas jet target. We model this scenario here and calculate the reaction events for the astrophysically relevant reaction {sup 13}C({sup 4}He, n ){sup 16}O. We find that it should be experimentally possible to determine the plasma screening enhancement factor for fusion reactions by detecting the difference in reaction events between two scenarios of ion flow interacting with the plasma target and a simple gas target. This provides a way to evaluate nuclear reaction cross-sections in stellar environments and can significantly advance the field of nuclear astrophysics.

79 ASTRONOMY AND ASTROPHYSICS↗

Laboratory observations of electron temperature in the wake of a sphere in a streaming plasma

A parametric study was performed of electron-temperature variation in the wake of a conducting sphere in a streaming plasma. The flow conditions were varied as follows: the ambient electron temperatures in the range from 850 to 2450 K; the ambient electron densities in the range from 0.0005 to 0.00007 per cu cm; and body potentials relative to plasma potential in the range from +1.7 to -2.8 V for an ion-beam energy of approximately 4 eV. Electron-temperature enhancements were observed which ranged up to 200 per cent above ambient in the nearest proximity of the body surface. The magnitude of the enhancement depends upon the ambient density, temperature, and body potential.

Oran, W. A.↗

Prediction of Laminar and Turbulent Boundary Layer Flow Separation in V/STOL Engine Inlets

A description is presented of the development of the boundary layer on the lip and diffuser surface of a subsonic inlet at arbitrary operating conditions of mass flow rate, free stream velocity and incidence angle. Both laminar separation on the lip and turbulent separation in the diffuser are discussed. The agreement of the theoretical results with model experimental data illustrates the capability of the theory to predict separation. The effects of throat Mach number, inlet size, and surface roughness on boundary layer development and separation are illustrated.

Chou, D. C.↗

Potential flows in propulsion system inlets

Collection of computer programs used to calculate compressible potential flow in arbitrary axisymmetric inlet at any combination of operating conditions of inlet mass-flow rate, free stream velocity, and incident angle proves useful in development of wide variety of propulsion system inlet designs.

Farrell, C. A., Jr.↗