Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Controlled growth of ZnO nanorods on textured silicon wafer and the application for highly effective and recyclable SERS substrate by decorating Ag nanoparticles

Highlights: • The growth behavior of ZnO nanorods (NRs) is studied on the textured Si wafer. • A new surface-enhanced Raman scattering (SERS) substrate has been achieved by assembling Ag nanoparticles onto the ZnO NRs. • The SERS substrate exhibits good performance in terms of high sensitivity, good reproducibility and recyclability. - Abstract: Based on the study of growth behavior of ZnO nanorods on the textured Si wafer, a new three-dimensional surface-enhanced Raman scattering substrate has been achieved by assembling Ag nanoparticles onto the ZnO nanorods to form a radial plasmonic nanostructure. It is found that the new substrate exhibits good performance in terms of high sensitivity and good reproducibility for surface-enhanced Raman scattering. The determined enhancement factor is in the order of 10{sup 7} and the Raman spectra exhibit the remarkable consistency with the deviation below 5.0%. Compared to the substrate fabricated with ZnO nanorod array on the flat Si wafer, the new substrates have the higher utility of excitation light. Meanwhile, the new substrate is demonstrated to be recyclable after the irradiation of ultraviolet light.

36 MATERIALS SCIENCE↗

Optimization of a neutron detector design using adjoint transport simulation

A synthetic aperture approach has been developed and investigated for Special Nuclear Materials (SNM) detection in vehicles passing a checkpoint at highway speeds. SNM is postulated to be stored in a moving vehicle and detector assemblies are placed on the road-side or in chambers embedded below the road surface. Neutron and gamma spectral awareness is important for the detector assembly design besides high efficiencies, so that different SNMs can be detected and identified with various possible shielding settings. The detector assembly design is composed of a CsI gamma-ray detector block and five neutron detector blocks, with peak efficiencies targeting different energy ranges determined by adjoint simulations. In this study, formulations are derived using adjoint transport simulations to estimate detector efficiencies. The formulations is applied to investigate several neutron detector designs for Block IV, which has its peak efficiency in the thermal range, and Block V, designed to maximize the total neutron counts over the entire energy spectrum. Other Blocks detect different neutron energies. All five neutron detector blocks and the gamma-ray block are assembled in both MCNP and deterministic simulation models, with detector responses calculated to validate the fully assembled design using a 30-group library. The simulation results show that the 30-group library, collapsed from an 80-group library using an adjoint-weighting approach with the YGROUP code, significantly reduced the computational cost while maintaining accuracy. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

In situ study of Crystal Surface Interactions Guided by Biomolecules or Ligands

Ligands or biomolecules commonly exist and play a key role in particle-mediated materials growth, leading to a wide variety of structures. However, it is not fully understood how these organic molecules control forces interacting between particles and thus the dynamics of particle assembly. Herein, the overall goal of this project is to gain an understanding of the role of surface-coating materials (ligands and biomolecules) in particle assembly processes; that is, how surface-coating materials determine the interfacial structures of solvent/ligand (biomolecule)/crystal surface and thus the interaction forces.

36 MATERIALS SCIENCE↗

Modular anti-rotation drilling systems and methods

A modular anti-rotation device for preventing rotation with respect to the central axis of a drilling tool in a borehole and for producing a notch in a borehole surface. The anti-rotation device includes an upper fixture portion and a lower fixture portion in axial alignment. The upper fixture portion and the lower fixture portion are connected by yoke assemblies. Each yoke assembly is connected to the fixture portion and fixture portion at one end, and forming an articulated joint of the upper yoke assembly and the lower yoke assembly at a distal end opposite the first end. A roller is connected at each joint, connecting the upper and lower yoke assemblies. The rollers engage vertically with a borehole surface, the rollers travelling axially, as a drill shaft penetrates into the borehole, the rollers simultaneously preventing radial movement of the anti-rotation device and prevent rotation with respect to the central axis of the borehole.

Su, Jiann-Cherng↗

Torque ripple reduction in electric machines

An electric machine, such as an Internal Permanent magnet or Synchronous Reluctance machine, having X phases, that includes a stator assembly, having M slots, with a stator core and stator teeth, that is further configured with stator windings to generate a stator magnetic field when excited with alternating currents and extends along a longitudinal axis with an inner surface that defines a cavity; and a rotor assembly, having N poles, disposed within the cavity which is configured to rotate about the longitudinal axis, wherein the rotor assembly includes a shaft, a rotor core located circumferentially around the shaft. The machine is configured such that a value k=M/(X*N) wherein k is a non-integer greater than about 1.3. The electric machine may alternatively, or additionally, include a non-uniformed gap between the exterior surface of the rotor spokes and the interior stator surface of the stator.

42 ENGINEERING↗

Rigid Supramolecular Aramid Nanotubes as Catalyst Supports

Solution‐phase heterogeneous catalysts benefit from nanoscale dimensions, which maximize specific surface area and enhance catalytic activity. However, the ease of recovering such nanocatalysts depends on the design of the support materials, which are often particle‐like. Rigid 1D nanomaterials are proposed as supports that can enhance separability while offering high volumetric specific surface area for greater catalyst loading and activity. Here, aramid amphiphiles (AAs) are designed to spontaneously self‐assemble in water into high‐aspect‐ratio supramolecular nanotubes with tunable surface chemistry. These AA nanotubes exhibit high persistence lengths (P = 750 ± 340 µm) and mechanical stiffnesses (3 N/m). Incorporating surface thiol groups enables immobilization of catalytic gold nanoparticles. The resulting AA nanotube‐gold nanoparticle complexes exhibit high catalytic activity, efficient recoverability via simple microfiltration, and sustained reusability over ten reaction cycles. This study demonstrates the utility of molecular self‐assembled 1D nanomaterials as versatile scaffolds for the reuse and recovery of nanoscale catalysts.

1D nanomaterials↗

From 2-D CuO nanosheets to 3-D hollow nanospheres: interface-assisted synthesis, surface photovoltage properties and photocatalytic activity

CuO hierarchical hollow nanostructures, assembled by nanosheets, were successfully prepared in n-octanol/aqueous liquid system through a microwave approach. Controlled experiments revealed that both bubble and interface play key roles in determining the self-assembly process of CuO hierarchical hollow nanostructures, and the morphology/size of building blocks and final products could be readily tuned by adjusting reaction parameters. Furthermore, a self-assembly mechanism of aggregation-then-growth process through bubble template was proposed for the formation of the hollow hierarchical architectures. Photocatalytic performance evidenced that the obtained CuO hierarchical hollow nanostructures possessed superior photocatalytic efficiency on RhB than that of non-hollow nanostructures, which could be easily demonstrated by SPS response about the separation and recombination situation of photogenerated charges. - Graphical abstract: From 2-D CuO nanosheets to 3-D hollow nanospheres: interface-assisted synthesis, surface photovoltage properties and photocatalytic activity. Various CuO architectures with different morphologies and sizes, including hierarchical hollow nanostructures were prepared through a synergic bubble-template and interface-assisted approach.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Separable self-aligning waveguide connector using a ball detent assembly having ball elements engaged with mating divots

Provided herein are various examples of separable waveguide couplers. In one example, a collar element is provided to surround a member comprising a faying surface, a waveguide conduit, and alignment protrusions arranged radially about a perimeter of the faying surface, where the collar element is configured to accept insertion of a mating member comprising a mating faying surface and a mating waveguide conduit. A ball detent assembly is provided having a spring element that retains ball elements in holes formed through the collar element. The waveguide conduit and the mating waveguide conduit are configured to be aligned radially by at least engagement of the alignment protrusions with alignment channels in the mating member and restrained axially by at least engagement of the ball elements with mating divots in the mating member.

Weems, Weyman Albert↗

Flat-plate solar array project. Volume 5: Process development

The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

Gallagher, B.↗

Langmuir Films of n -Alkanethiol-Capped Gold Nanoparticles and n -Alkanes: Interfacial Mixing Scenarios Assessed by X-ray Reflectivity and Grazing Incidence Diffraction

A series of n-alkanes cospread with alkanethiol-stabilized gold nanoparticles (AuNP) were studied as Langmuir monolayers by synchrotron X-ray reflectivity and diffraction. Tetradecanethiol capped gold nanoparticles with core diameters close to 2 nm were used to make films at 20 °C, below the ligand order–disorder temperature. A variety of n-alkane chain lengths (Cn = C n H 2n+2 , where n = 12, 15 and 16) were tested to assess the interfacial assembly of nanoparticle films as a result of different mixing scenarios indicated in their surface pressure versus area isotherms. Synchrotron grazing incidence X-ray diffraction (GIXD) and reflectivity (XR) confirm that mixtures of n-alkane and AuNP exhibiting improved fluidity in their compression isotherm are indeed incorporating n-alkane into the AuNP ligand shell and stabilizing it at the air–water interface. The resulting films show a doubling of their correlation lengths and thus a significant improvement on their ordering, as well as increased lattice spacing that is dependent upon the n-alkane chain length. Mixtures that do not exhibit changes in their surface pressure vs area isotherm similarly show little change in the interfacial assembly of the nanoparticle films except to promote monolayer collapse and multilayer formation. Improvements to the film order are assigned to the initial formation of larger nanoparticle domains. Here, the nature of the chain length dependence and persistence of the n-alkane through compression suggest a favorable interaction with the nanoparticle ligand shell that results in the extension of methylene units of the longer alkanes beyond the thiol layer, which has implications for influencing nanoparticle interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deformable bearing seat

A deformable bearing seat is described for seating a bearing assembly in a housing. The seat includes a seating surface in the housing having a first predetermined spheroidal contour when the housing is in an undeformed mode. The seating surface is deformable to a second predetermined spherically contoured surface when the housing is in a deformed mode. The seat is particularly adaptable for application to a rotating blade and mounting ring assembly in a gas turbine engine.

Moreman, O. S., III↗

Optical contamination evidence from Skylab and Gemini flights

Final results from a part of the T027 experiment performed on the first Skylab mission are presented. The sample array system containing 248 optical surfaces and exposed outside the orbital workshop did not collect any significant contaminants. Unfortunate performance compromises and the relative cleanliness of the assembly on the antisolar side placed the amount of available surface contaminants at or below the limiting sensitivity of the ground measuring instruments. Significant contamination was seen near the extravehicular hatch quadrant on the solar side of the orbiting assembly, and some results from returned samples are presented. Optical windows and mirrors exposed on the Gemini 12 mission showed degradation up to 35% in the UV wavelength region and solar absorptance increases up to 1.8 times the clean values. An expression for the attenuation coefficient vs wavelength is presented. The contaminant, a silicone base material, varied in thickness from 22 nm to 88 nm. The postflight scattered luminance of a contaminated Gemini 12 left-hand spacecraft hatch window was used to obtain threshold stellar visibility curves as a function of scattered and incident sunlight angles.

Muscari, J. A.↗

Controlling Interfacial Properties of Lithium-Ion Battery Cathodes with Alkylphosphonate Self-Assembled Monolayers

In this paper, the preparation and characterization of modified LiMn 2 O 4 (LMO) cathodes utilizing chemisorbed alkylphosphonic acids to chemically modify their surfaces are reported. Electrochemical methods to study ionic and molecular mobility through the alkylphosphonate self-assembled monolayers (SAMs) for different alkyl chain compositions, in order to better understand their impact on the lithium-ion electrochemistry, are utilized. Electrochemical trends for different chains correlate to trends observed in contact angle measurements and solvation energies obtained from computational methods, indicating that attributes of the microscopic wettability of these interfaces with the battery electrolyte have an important impact on ionic mobility. The effects of surface modification on Mn dissolution are also reported. The alkylphosphonate layer provides an important mode of chemical stabilization to the LMO, suppressing Mn dissolution by 90% during extended immersion in electrolytes. A more modest reduction in dissolution is found upon galvanostatic cycling, in comparison to pristine LMO cathodes. Finally, taken together, the data suggest that alkylphosphonates provide a versatile means for the surface modification of lithium-ion battery cathode materials allowing the design of specific interfaces through modification of organic chain functionalities.

25 ENERGY STORAGE↗

Development of Langmuir and Spatially Resolved OES Diagnostics for Arc Jet Shock and Boundary Layer Measurements Relevant to Atmospheric Re-Entry Environments

The second-generation miniature Arc Jet Research Chamber (mARC) ground testing facility at NASA Ames requires physical characterization of its supersonic plasma flow to verify numerical models and material sample testing. Two types of plasma diagnostics will be utilized: Langmuir probes and optical emission spectroscopy (OES). Several single and triple Langmuir probes have been constructed and will be inserted parallel to the flow via a sweep arm to measure post-shock electron temperature and number density along radial profiles at different axial distances. Due to the high heat flux (200-3000 W/cm2) sweep durations are necessarily short (< 0.1 s). Measuring these properties near the probe surface provide characterization of the post-shock environment. This is an important metric for validating coupled CFD-material codes, and will provide insight into longstanding thermocouple anomalies attributed to charging of heatshield surfaces. An OES system has also been assembled to obtain spatially resolved density and temperature for various flow species. The system consists of a convex lens that forms an image of the plasma onto a 16-channel linear fiber array, which will simultaneously capture the spectra from sixteen different locations. The light emission from the plasma is then focused by a spherical mirror into a spectrometer and recorded with a camera. These measurements non-intrusively provide a new spatially resolved flow characterization capability. This will initially be used to resolve issues with shock radiation interference in pyrometer measurements of material surface temperature. The design of each diagnostic and any initial results will be discussed.

Ethan Main-Loam Leong↗

Method for achieving sustained anisotropic crystal growth on the surface of a silicon melt

An apparatus for growing a crystalline sheet from a melt includes a cold block assembly. The cold block assembly may include a cold block and a shield surrounding the cold block and being at an elevated temperature with respect to that of the cold block, the shield defining an opening disposed along a surface of the cold block proximate a melt surface that defines a cold area comprising a width along a first direction of the cold block, the cold area operable to provide localized cooling of a region of the melt surface proximate the cold block. The apparatus may further include a crystal puller arranged to draw a crystalline seed in a direction perpendicular to the first direction when the cold block assembly is disposed proximate the melt surface.

36 MATERIALS SCIENCE↗

Method for achieving sustained anisotropic crystal growth on the surface of a silicon melt

An apparatus for growing a crystalline sheet from a melt includes a cold block assembly. The cold block assembly may include a cold block and a shield surrounding the cold block and being at an elevated temperature with respect to that of the cold block, the shield defining an opening disposed along a surface of the cold block proximate a melt surface that defines a cold area comprising a width along a first direction of the cold block, the cold area operable to provide localized cooling of a region of the melt surface proximate the cold block. The apparatus may further include a crystal puller arranged to draw a crystalline seed in a direction perpendicular to the first direction when the cold block assembly is disposed proximate the melt surface.

36 MATERIALS SCIENCE↗