Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface slopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Cratering history of the Uranian satellites - Umbriel, Titania, and Oberon

Crater size-frequency data for Umbriel, Titania, and Oberon are presented, and the implications of those data are discussed in terms of the geologic histories of these bodies and the populations of objects that have cratered them. The surfaces of Oberon and Umbriel are old and are inferred to date to a period early in their histories when the cratering rate was significantly higher than at present. No significant endogenic resurfacing appears to have occurred on either body after that inferred period of intense cratering. Titania exhibits the youngest surface of these three and appears to have undergone almost complete endogenic resurfacing. Among the Uranian satellites the surfaces of Oberon and Umbriel are interpreted to be the oldest, that of Titania intermediate, and those of Ariel and parts of Miranda the youngest. The size-frequency distributions for these satellites have an average slope of about -3, indicative of a steep crater production function. The cumulative size-frequency data for these Uranian satellites may be interpreted to indicate that parts of their surfaces are saturated with craters at small diameters.

Plescia, J. B.↗
DOE OSTI2023

Comparing the Effectiveness of Low Temperature Bake in EP and BCP Cavities

Electropolishing (EP) and buffered chemical polishing (BCP) are conventional surface preparation techniques for superconducting radiofrequency (SRF) cavities. Both EP and BCP treated SRF cavities display high field Q-slope (HFQS) which degrades performance at high gradients. While high gradient performance in EP cavities can be improved by introducing oxygen via a low temperature bake (LTB) of 120^{°}C by 48 hours, LTB does not consistently remove HFQS in BCP cavities. There is no consensus as to why LTB is not effective on BCP prepared cavities. We examine quench in EP, BCP, EP+LTB, and BCP+LTB treated 1.3 GHz single-cell Nb cavities by studying the heating behavior with field using a temperature mapping system. Cavity performance is correlated to characterizations of surface impurity profile obtained via time of flight secondary ion mass spectrometry studies. We observe a difference in near surface hydrogen concentration following BCP compared to EP that may suggest that the causes of quench in EP and BCP cavities are different.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Platinum Surface Water Orientation Dictates Hydrogen Evolution Reaction Kinetics in Alkaline Media

The fundamental understanding of sluggish hydrogen evolution reaction (HER) kinetics on a platinum (Pt) surface in alkaline media is a topic of considerable debate. Herein, we combine cyclic voltammetry (CV) and electrical transport spectroscopy (ETS) approaches to probe the Pt surface at different pH values and develop molecular-level insights into the pH-dependent HER kinetics in alkaline media. The change in HER Tafel slope from ~110 mV/decade in pH 7–10 to ~53 mV/decade in pH 11–13 suggests considerably enhanced kinetics at higher pH. The ETS studies reveal a similar pH-dependent switch in the ETS conductance signal at around pH 10, suggesting a notable change of surface adsorbates. Fixed-potential calculations and chemical bonding analysis suggest that this switch is attributed to a change in interfacial water orientation, shifting from primarily an O-down configuration below pH 10 to a H-down configuration above pH 10. This reorientation weakens the O–H bond in the interfacial water molecules and modifies the reaction pathway, leading to considerably accelerated HER kinetics at higher pH. Finally, our integrated studies provide an unprecedented molecular-level understanding of the nontrivial pH-dependent HER kinetics in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

Diurnal and Seasonal Cold Lands Signatures in SSM/I-scale Microwave Radiometry of the North Slope of Alaska

In this paper, we explore scaling and data assimilation-related issues associated with utilizing passive microwave satellite observations of Cold Lands-in this case, the climatologically and ecologically sensitive arctic tundra. Our approach expands on our earlier work using a one-year dataset from the Radiobrightness Energy Balance Experiment-3 (REBEX-3). REBEX-3 featured a tower-based SSM/I (Special Sensor Microwave/Imager) simulator deployed on the North Slope of Alaska in 1994-95. Two findings are significant here. First, a comparison of tower and satellite signatures at 19 and 37 GHz strongly suggested that the North Slope is radiometrically homogeneous for spatial scales up to SSM/I footprints (approximately 25 km), an unusual and valuable characteristic for monitoring and retrieving land surface conditions. And second, at the plot scale, signatures of snow/no-snow and freeze/thaw transitions were identifiable for tussock tundra land cover, so that even snow-free frozen tundra could be unambiguously distinguished from tundra covered with dry snow, another unusual and valuable characteristic. We present results from analyzing satellite brightness signatures of selected North Slope pixels corresponding to instrumented sites along a transect from the Brooks Range to the Arctic Ocean. A custom EASE (Equal Area Scalable Earth)-Grid processor was used to extract SSMJI data for every orbit with observations of this region during the 1994-95 year. The resulting high temporal-resolution (4-8 points/day), gridded data were then analyzed for evidence of the same diurnal and seasonal signatures seen at the plot scale (through micrometeorological and/or brightness data). Differences between satellite and tower brightness observations are quantified for various conditions at the REBEX-3 site. Such differences from the less-frequent and/or larger-scale satellite observations represent a form of input 'noise' in data assimilation applications. For the other sites, the performance of snow/no-snow and freeze/thaw discriminators vs. ground truth represents an opportunity to gauge the homogeneity of other pixels.

Kim, Edward J.↗
NASA NTRS2012

Characterization of Mineralogy Across Vesta

Dawn VIR spectra are characterized by pyroxene absorptions and no clear evidence for abundant other minerals are observed at the scale of the present measurements. Even though Vesta spectra are dominated by pyroxenes, spectral variation at regional and local scales are evident and distinct color units are identified. Although almost all of the surface materials exhibit spectra like those of howardites, some large units can be interpreted to be material richer in diogenite (based on pyroxenes band depths and band centers) and some others like eucrite-rich howardite units. VIR data strongly indicate that the south polar region (Rheasilvia) has its own spectral characteristics, indicating the presence of Mg-pyroxene-rich terrains (diogenite-like), while the equatorial areas have swallower band depths and average band centers at slightly longer wavelengths, consistent with more eucrite rich materials. Vesta surface shows considerable diversity at smaller scales (tens of km), in terms of spectral reflectance and emission, band depths and slopes. Many bright and dark spots are present on Vesta. Dark spots have low reflectance at visible wavelengths and are spectrally characterized by shallower 1 and 2 micron bands with respect the surrounding terrains. Bright materials have high reflectance and are often spectrally characterized by deep pyroxenes absorption bands. Vesta presents complex geology/topography and the mineral distribution is often correlated with geological and topographical structures. Ejecta from large craters have distinct spectral behaviors, and materials exposed in the craters show distinct spectra on floors and rims. VIR reveals the mineralogical variation of Vesta s crustal stratigraphy on local and global scales. Maps of spectral parameters show surface and subsurface unit compositions in their stratigraphic context. The hypothesis that Vesta is the HED parent body is consistent with, and strengthened by, the geologic and spectral context for pyroxene distribution provided by Dawn.

De Sanctis, M. C.↗
NASA NTRS2011

Isolation Effects on the Moon: High Topographic Slope Observations from the LRO and LOLA Instruments

The extremely low temperatures in the Moon's polar permanent shadow regions (PSR) has long been considered a unique factor necessary for entrapping volatile Hydrogen (H). However, recent discoveries indicate some H concentrations lie outside PSR, suggesting other geophysical factors may also influence H distributions. In this study we consider insolation and its resulting thermal effects as a loss/redistribution process influencing the Moon's near-surface < 1m volatile H budget. To isolate regional (5deg latitude band) insolation effects we correlate two data sets collected from the ongoing, 1.5 year long mapping mission of the Lunar Reconnaissance Orbiter (LRO). Epithermal neutron mapping data from the Lunar Exploration Neutron Detector (LEND) is registered and analyzed in the context of slope derivations from Lunar topography maps produced by the Lunar Observing Laser Altimeter (LOLA). Lunar epithermal neutrons are inferred to be direct geochemical evidence for near-surface H due to the correlated suppression of surface leakage fluxes of epithermal neutrons with increased H concentration. Regional suppressions of neutrons seen in LEND maps are considered localized evidence of H concentration increase in the upper 1 m of the Lunar surface. To quantify spatially localized insolation effects, LEND data are averaged from sparsely distributed pixels, classed as a function of the LOLA slope derivations.

McClanahan, T. P.↗
DOE OSTI2020

Non-Equilibrium Synthesis of Highly Active Nanostructured, Oxygen-Incorporated Amorphous Molybdenum Sulfide HER Electrocatalyst

Molybdenum sulfide emerged as promising hydrogen evolution reaction (HER) electrocatalyst thanks to its high intrinsic activity, however its limited active sites exposure and low conductivity hamper its performance. To address these drawbacks, the non-equilibrium nature of pulsed laser deposition (PLD) is exploited to synthesize self-supported hierarchical nanoarchitectures by gas phase nucleation and sequential attachment of defective molybdenum sulfide clusters. Furthermore, the physics of the process are studied by in situ diagnostics and correlated to the properties of the resulting electrocatalyst. The as-synthesized architectures have a disordered nanocrystalline structure, with nanodomains of bent, defective S-Mo-S layers embedded in an amorphous matrix, with excess sulfur and segregated molybdenum particles. Oxygen incorporation in this structure fosters the creation of amorphous oxide/oxysulfide nanophases with high electrical conductivity, enabling fast electron transfer to the active sites. The combined effect of the nanocrystalline pristine structure and the surface oxidation enhances the performance leading to small overpotentials, very fast kinetics (35.1 mV dec -1 Tafel slope) and remarkable long-term stability for continuous operation up to -1 A cm -2 . This work shows possible new avenues in catalytic design arising from a non-equilibrium technique as PLD and the importance of structural and chemical control to improve the HER performance of MoS-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Contribution of climate and land cover changes to reduction in soil erosion rates within small cultivated catchments in the eastern part of the Russian Plain during the last 60 years

Highlights: • The soil erosion has decreased at least 2–3 times over the last 30 years at the RP. • The increase in winter air temperature is the key reason for the soil loss reduction. • The crop rotation changes is the factor of erosion rate reduction at the forest zone. The eastern part of the Russian Plain is an important agricultural region of European Russia with high proportion of cultivated lands in the steppe, forest-steppe and forest (southern part) landscape zones. Soil erosion is the main process of land degradation and surface water contamination there. Climate and land cover changes have been observed in this region during the last 30 years. However, field quantitative assessments of soil erosion rates are not available for the eastern part of European Russia due to the lack of monitoring data as well as the evaluation of erosion/deposition processes in cultivated catchments using other field methods. Three representative small cultivated catchments with high (> 80%) proportion of cultivated lands were selected in the forest (southern part), forest-steppe and steppe zones of the study region to evaluate sedimentation rates in dry valley bottoms of the catchments for two-time intervals (1963–1986 and 1987–2016) based on the application of the bomb-derived and Chernobyl-derived {sup 137}Cs isotope for sediment dating. The 3–4 depth {sup 137}Cs profiles were used to assess the sedimentation rates within the each investigated catchment. It was established that the sedimentation rates have considerably decreased (at least 2–3 times) over the last 30 years compared to 1963–1986 in all the investigated catchments. This is in agreement with results of erosion rate calculations using erosion models for the forest zone, however not consistent with erosion rates assessments for the forest-steppe and steppe zones. According to the model calculations, erosion rates show a slight decrease in the forest-steppe zone and increase in the steppe zone. The reduction in surface runoff during snowmelt period is one of the reasons for decrease in erosion rates within cultivated slopes for all the investigated catchments. The increase in proportion of perennial grasses in the regional crop rotation is another important reason for the decrease in erosion rates for the catchment located in the south of the forest zone. The importance of land cover changes in a major decrease of soil losses from the cultivated fields of the investigated catchments located in the forest-steppe and steppe zones cannot be identified due to the lack detailed information about crop rotation for those particular sites. However, available regional information about crop rotation changes for the two-time intervals (1960–1980 and 1996–2012) do not explain very high reduction in sedimentation rates in the dry valley bottoms after 1986.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Structure-property relationship of graphene coupled metal (Ni, Co, Fe) (oxy)hydroxides for efficient electrochemical evolution of oxygen

Design of high-efficiency electrocatalysts for the oxygen evolution reaction (OER) is critical to meet future energy demands. A series of heterogeneous electrocatalysts based on graphene coupled mixed-metal (oxy)hydroxides containing specific concentrations of nickel, cobalt, and iron were synthesized to investigate the influence of metal composition on the structure, properties, and activities for OER. The addition of iron led to isolated metal (oxy)hydroxide sheets from a few hundred nanometers to less than 5 nm, leading to a high surface area. The increased d -spacing between layers of hydroxide and abundant hydroxyl groups adsorbed on the surface of the electrocatalysts contribute to better catalytic performance as displayed by the remarkable improvement in Tafel slopes. In addition, the presence of cobalt and nickel can aid in lowering the onset potential of OER. Small amounts of iron in NiFe and NiCoFe systems were found to significantly decrease the overpotential. The best OER electrocatalysts of the series were obtained for the ternary metal hydroxide of composition Ni 0.33 Co 0.34 Fe 0.33 , which generates a low overpotential of 0.332 V in reaching 10 mA cm -1 in 0.1 M KOH and the Tafel slope is as low as 51 mV dec -1 . Density functional theory calculations demonstrate the improvements of electronic structure and free energy changes of the ternary metal oxyhydroxide for more efficient OER electrocatalysis. Altogether, this work provides a solid foundation for further development of high-efficiency, scalable, and cost-effective mixed-metal (oxy)hydroxide electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A critical assessment of solutions to the galaxy diversity problem

Galactic rotation curves exhibit a diverse range of inner slopes. Observational data indicates that explaining this diversity may require a mechanism that correlates a galaxy's surface brightness with the central-most region of its dark matter halo. Here, in this work, we compare several concrete models that capture the relevant physics required to explain the galaxy diversity problem. We focus specifically on a Self-Interacting Dark Matter (SIDM) model with an isothermal core and two Cold Dark Matter (CDM) models with/without baryonic feedback. In contrast to the CDM case, the SIDM model can lead to the formation of an isothermal core in the halo, and is also mostly insensitive to baryonic feedback processes, which act on longer time-scales. Using rotation curves from 90 galaxies in the Spitzer Photometry & Accurate Rotation Curves (SPARC) catalog, we perform a comprehensive model comparison that addresses issues of statistical methodology from prior works. The best-fit halo models that we recover are consistent with standard CDM concentration-mass and abundance matching relations. We find that both the SIDM and feedback-affected CDM models are better than a CDM model with no feedback in explaining the rotation curves of low and high surface brightness galaxies in the sample. However, when compared to each other, there is no strong statistical preference for either the SIDM or the feedback-affected CDM halo model as the source of galaxy diversity in the SPARC catalog.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Derivation of closed-form ellipsoidal X-ray mirror shapes from Fermat's principle

Ellipsoidal and plane-elliptical surfaces are widely used as reflective, point-to-point focusing elements in many optical systems, including X-ray optics. Here the classical optical path function approach of Fermat is applied to derive a closed-form expression for these surfaces that are uniquely described by the object and image distances and the angle of incidence at a point on a mirror surface. A compact description facilitates design, modeling, fabrication, and testing to arbitrary accuracy. Congruent surfaces in two useful coordinate systems — a system centered on the ellipsoid's axes of symmetry and a mirror-centered or `vertex' system with the surface tangent to the xy plane at the mirror's center — are presented. Expressions for the local slope and radii of curvature are derived from the result, and the first several terms of the Maclauren series expansion are provided about the mirror center.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Towards a new generation long trace profiler LTP-2020: optical design of pencil beam interferometry sensor

Improvements in the quality of synchrotron beamline x-ray optics required for next-generation light sources (e.g. the ALS Upgrade project) drive the need to improve the performance of the metrology instrumentation used to measure these components. The Long Trace Profiler (LTP) that is in use at many synchrotron metrology laboratories around the world has some known issues that affect the accuracy of its measurements. The main error source is optical path difference (OPD) phase error introduced into the probe beam by inhomogeneities in the glass components used in the optical head. We have developed a new optical head design, LTP-2020, that replaces the cube polarizing beamsplitter (PBS) with a thin wedge plate polarizing beamsplitter (WPBS) and replaces the cemented doublet lens with an aspheric singlet. Both of these components significantly reduce the glass volume traversed by the laser probe beam. Careful attention to ghost ray interference produced by back reflection from optical surfaces is necessary to minimize distortion in the primary image that translates into systematic error in the slope angle measurement. We make extensive use of a commercial raytracing program to model the back reflections and adjust component parameters as necessary to minimize distortion. Deliberate misalignment of components is necessary to make the system perform correctly. Stringent requirements are placed on the 45◦ incidence coatings on the WPBS and on the normal incidence coatings on the lens and camera window elements. We encourage our colleagues who wish to upgrade their current LTP systems to join us in the procurement of these custom optical components.

Takacs, Peter Z.↗
DOE OSTI2025

Development of Transformative Preparation Methods to Push up High Q&G Performance of FRIB Spare HWR Cryomodule Cavities

The FRIB accelerator project construction, a top priority of US nuclear science, was completed in January 2022, and is now moving to user operation. The stable and reliable operation of the accelerating cryomodules is essential in achieving/fulfilling DOE and user expectations. So far, FRIB cryomodules meet all FRIB specifications for cavity performance. However, during the lifetime of machine operation, degradation of cryomodule performance is possible, as reported in similar operating facilities (CEBAF, SNS). If cryomodule degradation is observed at FRIB, the under-performing cryomodule will require replacement/maintenance. In effort to manage operational reliability, FRIB plans to construct a 0.53 half-wave cryomodule to serve as an active spare. In a parallel effort, FRIB will also work toward increasing operational Q and gradient of spare cryomodule cavities to gain an overall performance margin to support future operational reliability. The current FRIB cavity designs have a potential to operate at gradients higher than 8 MV/m, but are currently limited by field emission (FE) and/or high field Q slope (HFQS); known issue in buffered chemical polished (BCP) treated cavities. The proposal looks to develop transformative surface preparation treatments to improve the operational gradient of spare cryomodules higher than 10 MV/m while maintaining high Q. Thus, increasing operational margin by 30 - 50%. With the goal to improve operational reliability set, the proposal will investigate multiple objectives as possible paths forward to achieve an overall increase in cavity performance and gain a better understanding of SRF limiting mechanisms. The proposal will study the application of different chemical surface treatments to 0.53 half-wave cavities, with the addition of low temperature bakes (LTB), and measure their effects on accelerating performance. Proposed chemical treatments to be explored in this proposal include conventional EP acid mixtures, as well as innovated EP and BCP acid mixtures designed to simplify processing paths in migrating FE and HFQS. The proposed transformative treatment wet N-doping also has the potential to replicate recent advancements in SRF technology relating to nitrogen doping and high Q operation without the requirement for an ultra-high vacuum annealing furnace; currently being developed at FNAL and JLAB. In parallel, high Q performance relating to flux trapping will be investigated with the installation of a second layer of magnetic shielding in the vertical test Dewar. The research objectives presented in the proposal, and their corresponding effects on cavity performance, will provide essential knowledge and future guidance to the SRF community and provide possible paths for future SRF based projects and applications.

43 PARTICLE ACCELERATORS↗
NASA NTRS1972

Minor planets and related objects. VIII - Deimos.

Evaluation of 12 polarization measurements of Deimos in blue light were obtained at phase angles between 5 and 31 deg. A well-developed negative branch, with minimum polarization approximately -1.5% near phase angle 11 deg, indicates that Deimos is not bare rock but has a particulate surface layer of dark dust or powder. The phase angle of inversion is 19.5 deg, and the slope of the positive branch is 0.26 plus or minus 0.01% per degree. On the basis of the slope-albedo law for the moon and the major asteroids, the geometrical albedo of Deimos in blue light should be 0.07 plus or minus 0.01, and the radius 5.4 plus or minus 0.8 km. These values are in good agreement with preliminary Mariner 9 data.

Zellner, B.↗
NASA NTRS1978

Aerodynamic heating in gaps of thermal protection system tile arrays in laminar and turbulent boundary layers

An experimental heat-transfer investigation was conducted on two staggered arrays of metallic tiles in laminar and turbulent boundary layers. This investigation was conducted for two purposes. The impingement heating distribution where flow in a longitudinal gap intersects a transverse gap and impinges on a downstream blocking tile was defined. The influence of tile and gap geometries was analyzed to develop empirical relationships for impingement heating in laminar and turbulent boundary layers. Tests were conducted in a high temperature structures tunnel at a nominal Mach number of 7, a nominal total temperature of 1800 K, and free-stream unit Reynolds numbers from 1.0 x 10 million to 4.8 x 10 million per meter. The test results were used to assess the impingement heating effects produced by parameters that include gap width, longitudinal gap length, slope of the tile forward-facing wall, boundary-layer displacement thickness, Reynolds number, and local surface pressure.

Avery, D. E.↗
NASA NTRS1991

Supercritical baroclinic disturbances under the influence of topography

An Eady model modified to include Ekman dissipation and sloping horizontal boundaries is used to investigate the nonlinear evolution of baroclinic waves in the presence of surface topography. The effectiveness of the topography to phase lock and equilibrate a given mode vs that of baroclinity to propagate and vacillate that mode is found to depend on the topographic height, its zonal structure, and the level of supercriticality. When topography is sinusoidal and of the same wavelength as the baroclinically most unstable mode, it induces a short-period amplitude modulation whose envelope represents the baroclinic evolution. The dynamics of this modulation is explored analytically. When the sinusoidal topography is of a longer zonal wavelength, a 'mixed' wave state persists with amplitude dominance shifting between the topographic mode and the baroclinic mode, depending on the relative strength of form drag and baroclinicity. Model results are also compared, in appropriate parameter limits, with near-resonance asymptotic results and annulus experiments.

Chou, Shih-Hung↗
NASA NTRS1993

Quasiconical free interaction between a swept shock and a turbulent boundary layer

Previous observations that fin-generated interactions are quasi-conical in nature were further confirmed by surface pressure measurements spanning Mach 2.5-3.5, which encompassed unseparated through strongly separated interactions. For strongly separated interactions in which the shock wave is bifurcated into a lambda-foot structure, the conical free interaction hypothesis was validated through an appropriate scaling of the far-field surface pressure distribution. The behavior of the lambda-foot structure, such as the decrease of the slope of the separation shock with interaction strength, was explained by invoking the conical free interaction hypothesis. Through the conical free interaction hypothesis, it was further shown that the triple-shock intersection behaves in a complicated manner with changes in interaction strength.

Lu, Frank K.↗
NASA NTRS1993

Surface finish quality of the outer AXAF mirror pair based on X-ray measurements of the VETA-I

We employ the X-ray measurements of the VETA-I taken at the X-Ray Calibration Facility (XRCF) of the Marshall Space Flight Center (MSFC) to extract information about the surface finish quality of the outermost pair of AXAF mirrors. The particular measurements we consider are 1D scans of the core of the point response function (PRF) (FWHM scans), the encircled energy as a function of radius, and 1D scans of the wings of the PRF. We discuss briefly our raytrace model which incorporates the numerous effects present in the VETA-I test, such as the finite source distance, the size and shape of the X-ray source, the residual gravitational distortions of the optic, the despace of the VETA-I, and particulate contamination. We show how the data constrain the amplitude of mirror surface deviations for spatial frequencies greater than about 0.1/mm. Constraints on the average amplitude of circumferential slope errors are derived as well.

Hughes, John P.↗