Search NASA⌕ Search

SEARCH · Search NASA

Results for “zirconates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51

Influence of Temperature on CaO-MgO-Al2O3-SiO2 (CMAS) Corrosion on Thermal Barrier Coatings

Higher operating temperature improves the energy efficiency in gas turbine engines and thermal barrier coatings are applied to protect the blades from high temperature and dust corrosion. Dust composed by CaO-MgO-Al2O3-SiO2 (CMAS) can melt and react with pyrochlore zirconates thermal barrier materials and degrade the performance or cause failure of the coatings. This paper discusses the relationship of the reaction product and corrosion temperature.

20 FOSSIL-FUELED POWER PLANTS↗

Smart patch integration development of compression connector structural health monitoring in overhead transmission lines

Integration of smart patches into full-tension splice connectors in overhead power transmission lines was investigated. Lead zirconate titanate (PZT) -5A was used as a smart material and an aluminum beam was used as a host structure. Negative electrode termination was examined by using copper adhesive tape and direct bonding methods. Various commercial adhesives were studied for PZT integration onto the host structure. Aluminum beam specimens with integrated PZT smart patches were tested under thermal cycling at a temperature of 125 C, which is the higher-end temperature experienced by in-service aluminum conductor steel-reinforced cables. Electromechanical impedance (EMI) measurements were conducted at room temperature, and the root mean square deviation (RMSD) of the conductance signals was used to analyze the EMI data. It has been shown that the negative electrode method has an important effect on the performance of the integrated PZT. The PZT displayed more susceptibility to cracking when copper tape was used than when direct bonding was used. The reliability of PZT in direct bonding depended on the adhesives used in bonding layers. Although a hard alumina based adhesive can lead to cracking of the PZT, a high-temperature epoxy with adequate flexibility, such as Duralco 4538D, can provide the desired performance under target thermal cycling conditions. The RMSD parameter can characterize conductance signatures effectively. It also was demonstrated that RMSD can be used to quantify the fatigue of the PZT integration system, although RMSD is used primarily as a damage index in monitoring structural health.

compression connector↗

Performance of PZT stacks under high-field electric cycling at various temperatures in heavy-duty diesel engine fuel injectors

Testing and characterization of large prototype lead zirconate titanate (PZT) stacks present substantial technical challenges to electronic systems. The work in this study shows that an alternative approach can be pursued by using subunits extracted from prototype stacks. Piezoelectric and dielectric integrity was maintained even though the PZT plate specimens experienced an additional loading process involved with the extraction after factory poling. Extracted 10-layer plate specimens were studied by an electric cycle test under an electric field of 3.0/0.0 kV/mm, 100 Hz to 108 cycles, both at room temperature (22 C) and at 50 C. The elevated temperature had a defined impact on the fatigue of PZT stacks. About 48 and 28% reductions were observed in the piezoelectric and dielectric coefficients, respectively, after 108 cycles at 50 C, compared with reductions of 25 and 15% in the respective coefficients at 22 C. At the same time, the loss tangent varied to a limited extent. The evolution of PZT electrode interfacial layers or nearby dielectric layers should account for the difference in the fatigue rates of piezoelectric and dielectric coefficients. But the basic contribution to observed fatigue may result from the buildup of a bias field that finally suppressed the motion of the domain walls. Finally, monitoring of dielectric coefficients can be an effective tool for on-line lifetime prediction of PZT stacks in service if a failure criterion is defined properly.

cyclic fatigue↗

Structural health monitoring of compression connectors for overhead transmission lines

Two-stage aluminum conductor steel-reinforced (ACSR) compression connectors are extensively used in US overhead transmission lines. The connectors are made by crimping a steel sleeve onto a steel core and an aluminum sleeve over aluminum conductive strands. The connectors are designed to operate at temperatures up to 125 C, but their performance is increasingly degrading because of overloading of lines. Currently, electric utilities conduct routine line inspections using thermal and electrical measurements. However, information about the structural integrity of connectors cannot be obtained. In this work, structural health monitoring (SHM) of compression connectors was studied using electromechanical impedance (EMI) analysis. Lead zirconate titanate (PZT)-5A was identified as a smart material for SHM. A flexible high-temperature bonding layer was used to address challenges in PZT integration due to a significant difference in the coefficients of thermal expansion of PZT and the aluminum substrate. The steel joint on the steel core was investigated because it is responsible for the ultimate tensile strength of the connector. Tensile testing was used to create structural damage to the joint, or steel core pullout, and thermal cycling introduced additional structural perturbations. EMI measurements were conducted between the tests. The root mean square deviation (RMSD) of EMI was identified as a damage index. The use of steel joints has been shown to enable SHM under simulated conditions. The EMI signature is sensitive to variations in structural conditions. RMSD can be correlated to the structural health of a connector and has potential for use in the SHM and structural integrity evaluation.

compression connectors↗

Multi-layered proton-conducting electrolyte

The present invention provides a multilayer anode/electrolyte assembly comprising a porous anode substrate and a layered solid electrolyte in contact therewith. The layered solid electrolyte includes a first dense layer of yttrium-doped barium zirconate (BZY), optionally including another metal besides Y, Ba, and Zr (e.g., a lanthanide metal such as Pr) on one surface thereof, a second dense layer of yttrium-doped barium cerate (BCY), and an interfacial layer between and contacting the BZY and BCY layers. The interfacial layer comprises a solid solution of the BZY and BCY electrolytes. The porous anode substrate comprises at least one porous ceramic material that is stable to carbon dioxide and water (e.g., porous BZY), as well as an electrically conductive metal and/or metal oxide (e.g., Ni, NiO, and the like).

25 ENERGY STORAGE↗

Cellular structures with interconnected microchannels

A method for fabricating a cellular tritium breeder component includes obtaining a reticulated carbon foam skeleton comprising a network of interconnected ligaments. The foam skeleton is then melt-infiltrated with a tritium breeder material, for example, lithium zirconate or lithium titanate. The foam skeleton is then removed to define a cellular breeder component having a network of interconnected tritium purge channels. In an embodiment the ligaments of the foam skeleton are enlarged by adding carbon using chemical vapor infiltration (CVI) prior to melt-infiltration. In an embodiment the foam skeleton is coated with a refractory material, for example, tungsten, prior to melt infiltration.

36 MATERIALS SCIENCE↗

Acoustic manipulation of fluids based on eigenfrequency

An acoustic resonator device includes a fluid chamber with a carrier surface and a reflector surface. The fluid chamber is filled with a volume of a fluid that includes a phase-separate material such as algae. The carrier surface is coupled to a transducer, which may be a lead zirconate titanate (PZT) transducer. The transducer, when supplied with electricity, emits an acoustic wave-based output of an output frequency (e.g., ultrasound). A sensor may be used to track one or more eigenfrequencies of the volume of fluid, the acoustic resonator device, or some combination thereof. A controller may receive tracking data from the sensor and control the voltage source, the transducer, or some combination thereof to ensure that the output frequency matches one of the tracked eigenfrequencies, thereby maximizing excitation of the fluid to improve efficiency of mixing, stimulation, and separation of materials from fluid (e.g., for algal biocrude production).

09 BIOMASS FUELS↗

Sr and Co Vapor-Phase Transport from LSCF Cathodes

A series of tests were performed to differentiate between surface diffusion and vapor-phase diffusion of chemical species from LSCF cathode material at typical sintering temperatures (up to 1100°C) in SOFC production. A GDC source substrate was printed with LSCF and separated by an air gap from a YSZ target substrate. Various geometries with long surface paths were employed to reduce the possibility of surface transport. Sr and Co were detected on the target substrates via energy dispersive spectroscopy (EDS) and x-ray photoelectron spectroscopy (XPS), including spatially resolved XPS. These results support a vapor-phase transport mechanism for Sr and Co. Sintering conditions and barrier layer requirements may need to be revisited to prevent the formation of undesired strontium zirconate at cathode/electrolyte interface due to vapor-phase transport.

vapor phase transport, SOFC cathode, Sr transport↗

Distributions and Extraction of Rare Earth Elements from Coal and Coal By-Products

NETL is leading a research effort to investigate, characterize, and extract rare earth elements (REE) from coal and coal by-products, including coal ash. Characterization of geologic core samples, coal mine wastes, and coal ash has led to interesting findings on the mode of occurrence and fate of rare earth minerals, such as monazite, in coal-based materials. Mineral associations and elemental distributions have been investigated and results indicate that Th is associated with light rare earth elements (LREE), possibly as monazite, and Zr is associated with heavy rare earth elements (HREE), possibly as zircon. Preliminary extractions of REE from coal ash using 2M hydrochloric acid (HCl) and sodium hydroxide (NaOH) hydrothermal pretreatment have been investigated. Sodium hydroxide solution pretreatment followed by an acid digestion was shown to increase extraction of REE to nearly 90% for coal ash.

Roth, Elliot↗

Thermal barrier coatings

High temperature stable thermal barrier coatings useful for substrates that form component parts of engines such as a component from a gas turbine engine exposed to high temperatures are provided. The thermal barrier coatings include a multiphase composite and/or a multilayer coating comprised of two or more phases with at least one phase providing a low thermal conductivity and at least one phase providing mechanical and erosion durability. Such low thermal conductivity phase can include a rare earth zirconate and such mechanical durability phase can include a rare earth a rare earth aluminate. The different phases are thermochemically compatible even at high temperatures above about 1200° C.

Wolfe, Douglas E.↗

Thick Films acoustic sensors devoted to MTR environment measurements. Thick Films acoustic sensors devoted to Material Testing Reactor environment measurements

The development of advanced instrumentation for in-pile experiments in Material Testing Reactor constitutes a main goal for the improvement of the nuclear fuel behavior knowledge. An acoustic method for fission gas release detection was tested with success during a first experiment called REMORA 3 in 2010 and 2011, and the results were used to differentiate helium and fission gas release kinetics under transient operating conditions. This experiment was lead at OSIRIS reactor (CEA Saclay, France). The maximal temperature on the sensor during the irradiation was about 150 deg. C. In this paper we present a thick film transducer produce by screen printing process. The screen printing of piezoelectric offers a wide range of possible applications for the development of acoustic sensors and piezoelectric structure for measurements in high temperature environment. We firstly produced a Lead Zirconate Titanate (PZT) based paste composed of Pz27 powder from Ferroperm, CF7575 glass, and organic solvent ESL 400. Likewise a Bismuth Titanate based paste synthesized in our laboratory was produced. With these inks we produced thick film up to 130 μm by screen printing process. Material properties characterizations of these thick-film resonators are essential for device design and applications. The piezoelectric coefficients d33 and pyro-electric P(T) coefficient are investigated. The highest P(T) and d33 are respectively 80 μC.m{sup -2}.K{sup -1} and 130 μC.N{sup -1} for the PZT transducer -which validates the fabrication process-. In view of the development of this transducer oriented for high temperature and irradiation environment, we investigated the electrical properties of the transducers for different ranges of frequencies and temperature - from 20 Hz up to 40 MHz between 30 and 400 deg. C. We highlight the evolution of the impedance response and piezoelectric parameters of screen printed piezoelectric structures on alumina. Shortly an irradiation will be realized in order to investigate their reliability towards neutron fluence. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Advanced synthesis for enhanced accident tolerant of LWR cladding materials

Advanced materials synthesis is utilized at Argonne National Laboratory (ANL) with the intended goal of improving performance of light water reactor (LWR) claddings under normal operation and accident conditions. The advanced synthesis utilizes atomic layer deposition (ALD) techniques to infiltrate SiC wires wrapped around ZIRLO tubes with SiC deposits, to form a SiC-SiC composite on the ZIRLO tubes. This paper reports on the effort to deposit SiC using ALD. The deposition was successful in infiltrating deep into the wires structure, reaching the surface of the ZIRLO tubes, as indicated through different characterization techniques. Because of the slow deposition rate of SiC, only a limited amount of SiC was deposited (a few hundreds of nm of SiC thick layers). This was followed by a few micrometers of ALD deposition of zircon (ZrSiO{sub 4}.) on top of the SiC deposition. The additional deposition was adequate to hold the wires together around the tube. Work is ongoing to increase the SiC ALD deposition rate, and infiltrate the larger pores within the wires with other SiC deposition methods such as low temperature chemical vapor deposition (CVD). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sol-gel deposited transducers characteristics: A weight percent study - 15718

Monitoring functional machinery components that operate at elevated temperatures is costly and time consuming. This work explores leave in place composite transducers for high temperature monitoring of machinery components. A theoretical model was developed utilizing software provided by NASA. This model was then compared to the experimental results. The objective is to determine the characteristics of a set of spray-on composite transducers to identify the ideal transducer for any situation where a certain specification is made: - Operating temperature; - Signal amplitude/Signal to noise ratio; - Specific material property. The transducer is fabricated through a sol-gel deposition process that utilizes spraying the transducer onto the substrate. A sol-gel solution containing bismuth titanate is mixed with a combination of bismuth titanate and lead zirconate titanate(PZT) powders to create a composite transducer. Typical sintering methods have proved to be destructive and difficult to handle for the sol-gel deposition method; however, induction sintering has proved effective. -d{sub 33} decreases with increasing weight percent of bismuth titanate -the maximum usable temperature increases with increasing weight percent bismuth titanate -signal amplitude is also higher with increasing weight percent of bismuth titanate The ideal composition for the best signal amplitude and the highest operating temperature has been shown to be pure bismuth titanate; however, if the properties of the transducer are of utmost importance including conductivity and density then PZT should be added to increase these properties. The theoretical NASA Micromechanical Analysis Code by Generalized Method of Cell model has been validated through the experimental results of these experiments. Now that the composition of the transducer has been optimized to a specific application the future work is comprised of: - Utilizing the information to evaluate wall thickness - Integrating the optimized transducer with a wireless system for remote monitoring of mechanical component - Establishing a field deposition method for the spray-on transducer.

36 MATERIALS SCIENCE↗

Combustion Synthesis of Transuranic-doped Ceramics for Nuclear Waste Immobilization

Utilizing the devised SCS technique, crystalline transuranic-doped zirconate pyrochlores were formed for the first time without the need for a subsequent heating step. Typically, materials rapidly synthesized in a single-step self-sustaining exothermic reaction require further heating to induce crystallization and purify the product. The need for this secondary processing step can be attributed to factors such as an improper oxidizer to fuel ratio and the utilization of strong complexing compounds as fuels (i.e., reducing agents), all of which hinder complete combustion. The efficacy of the developed process was demonstrated by fabricating crystalline plutonium-doped Gd2Zr2O7 from solutions containing metal nitrates and urea in a properly tuned ratio

Burton-Allen, Janiya D.↗

Enhanced Pinning Properties of the Bilayers of YDy{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 7−δ} by SrZrO{sub 3} Nanoparticles through Low Fluorine Metallorganic Solution Deposition

Bilayered YDy{sub 0.5}Ba{sub 2}Cu{sub 3.6}O{sub 7−δ} superconducting films with a thickness of about 1 μ were deposited by metallorganic deposition method, an interlayer of secondary phase of SrZrO{sub 3} (SZO) and BaZrO{sub 3} (BZO) were inserted. Detailed growth mechanism studies of these structures as well as superconducting properties in different temperatures and magnetic field range (0–5 T) were investigated. Structural analysis showed that bilayer structure changed clearly the growth mechanism of YBCO. The SZO interlayer smoothens the film surface. Magnetic measurements of superconducting properties demonstrated that the critical temperature decreases slightly when both of SZO and BZO interlayer were inserted. This indicates a growing strain effect at the layer interfaces. The critical current densities as well as pining forces of bilayered YDy{sub 0.5}Ba{sub 2}Cu{sub 3.6}O{sub 7−δ} in the entire applied temperature and magnetic field range were enhanced by the insertion of SZO layer and decreased when BZO layer is introduced. The enhancement of the pinning properties is explained by the dense flux pinning in layered YDyBCO superconductors; this result may give further improvements in the current-carrying capability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculations of the Structural, Elastic, Magnetic, and Electronic Properties of the New Compound BaZr{sub 0.5}Mn{sub 0.5}O{sub 3} with Tetragonal Structure

Based on the density functional theory, we have calculated the structural properties of the BaZrO{sub 3} (BZO) cubic structure with PBE-GGA, PBEsol-GGA, and LDA approximations. The equilibrium lattice constant within GGA-PBEsol (a = 4.1847 Å) is in very good agreement with the experimental data (Holland and Redfern, Miner. Mag. 61: 65, 1997). The calculations of elastic properties of pure and doped BaZrO{sub 3} are calculated with PBEsol-GGA; both BZO and BZM are compressible and show a brittle nature. According to calculated electronic and magnetic properties, it is found that Mn-doped BaZrO{sub 3} system is a half metallic and exhibits a ferromagnetic character. The total magnetic moment of the cell is equal to3.57 µ{sub B}; this value comes from manganese atom (Mn) with a value of 3.176 µ{sub B}. The magnetic moments of barium, oxygen, and zirconium atoms are approximately equal to zero.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AC Susceptibility of BaZrO{sub 3} Nanoparticles Added YBa{sub 2}Cu{sub 3}O{sub 7−δ} Superconductor Prepared via Coprecipitation Method

In this work, magnetic properties of polycrystalline samples YBa{sub 2}Cu{sub 3}O{sub 7−δ} added with x mol.% of BaZrO{sub 3} (BZO) nanoparticles (x = 0.0, 1.0, 2.0, 3.0, 5.0, and 7.0) were studied by AC susceptibility (ACS) measurement. The samples were prepared using coprecipitation (COP) method. X-ray diffraction (XRD) results showed that all the samples were composed of Y-123 as the major phase and Y-211 as the secondary phase. XRD peak of BZO was also observed in the samples added with BZO nanoparticles. The intensity of the peak became higher with increasing amount of BZO addition indicating the presence of increased amount of the unreacted nanoparticles in the samples. The refined lattice parameters indicated that all the samples have an orthorhombic crystal structure without the occurrence of orthorhombic-tetragonal phase transformation. Scanning electron microscopy (SEM) images showed that the samples have randomly distributed grains with irregular shape. The average grain size increased from 0.30 μ m for the pure sample to 0.50 μ m for the BZO addition of 7.0 mol.%. ACS measurement showed a slight decrease of onset critical temperature, T{sub c−onset} (< 1 K) with BZO addition. Both phase lock-in temperature, T{sub cj}, and coupling peak temperature, T{sub p}, remained relatively unchanged for BZO addition up to 3.0 mol.%. Based on the Bean critical state model, the calculated intergranular critical current density, J{sub cm}, for the pure sample is 1.88 A/cm{sup 2} at T{sub p} = 84.8 K. For the sample added with 7.0 mol.% of BZO, J{sub cm} at T{sub p} = 83.6 K is 1.95 A/cm{sup 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗