Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analyzer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

A computer program for analyzing unresolved Mossbauer hyperfine spectra

The program for analyzing unresolved Mossbauer hyperfine spectra was written in FORTRAN 4 language for the Control Data CYBER 170 series digital computer system with network operating system 1.1. With the present dimensions, the program requires approximately 36,000 octal locations of core storage. A typical case involving two innermost coordination shells in which the amplitudes and the peak positions of all three components were estimated in 25 iterations requires 30 seconds on CYBER 173. The program was applied to determine the effects of various near neighbor impurity shells on hyperfine fields in dilute FeAl alloys.

Schiess, J. R.↗

NASA charging analyzer program: A computer tool that can evaluate electrostatic contamination

A computer code, the NASA Charging Analyzer Program (NASCAP), was developed to study the surface charging of bodies subjected to geomagnetic substorm conditions. This program will treat the material properties of a surface in a self-consistent manner and calculate the electric fields in space due to the surface charge. Trajectories of charged particles in this electric field can be computed to determine if these particles enhance surface contamination. A preliminary model of the Spacecraft Charging At The High Altitudes (SCATHA) satellite was developed in the NASCAP code and subjected to a geomagnetic substorm environment to investigate the possibility of electrostatic contamination. The results indicate that differential voltages will exist between the spacecraft ground surfaces and the insulator surfaces. The electric fields from this differential charging can enhance the contamination of spacecraft surfaces.

Stevens, N. J.↗

The Martian ionosphere as observed by the Viking retarding potential analyzers

The first in situ measurements of the ionosphere of another planet were obtained by retarding potential analyzers of the Viking landers. These results are presented with attention to: (1) the determination of the peak ion concentration in the ionosphere layer at several altitudes, (2) the measurement of ion temperatures, and (3) an equatorward horizontal ion velocity observed at various heights. Both landers entered the ionosphere layer at solar zenith angles near 44 deg, and more structure was observed in the height profiles of ionospheric quantities on Viking 2, although the profiles were similar in shape to those of Viking 1.

Hanson, W. B.↗

NASCAP, a three-dimensional Charging Analyzer Program for complex spacecraft

A computer code, NASCAP (NASA Charging Analyzer Program), has been developed by Systems, Science and Software under contract to NASA-LeRC to simulate the charging of a complex spacecraft in geosynchronous orbit. The capabilities of the NASCAP code include a fully three-dimensional solution of Poisson's equation about an object having considerable geometrical and material complexity, particle tracking, shadowing in sunlight, calculation of secondary emission, backscatter and photoemission, and graphical output. A model calculation shows how the NASCAP code may be used to improve our understanding of the spacecraft-plasma interaction.

Katz, I.↗

NASA Charging Analyzer Program - A computer tool that can evaluate electrostatic contamination

The data from the ATS-5 and -6 Auroral Particles Experiments have shown that the environment at geosynchronous orbit can charge spacecraft surfaces to appreciable negative values. Such surface charges could have undesirable effects on satellite equipment and the data obtained in satellite experiments. A computer program, the NASA Charging Analyzer Program (NASCAP), has, in this connection, been developed to determine the surface charging of spacecraft when encountering geomagnetic substorm conditions. Once a model of a spacecraft has been developed in the NASCAP code, the surface charging can be computed for any environmental input flux. On the basis of the obtained information regarding the surface charging, charged particle trajectories can be computed to determine if it is possible for a particle to return to a satellite surface. It is pointed out that the computer runs conducted with the NASCAP code represent the first attempts to use a self-consistent program to study the behavior of spacecraft surfaces experiencing a geomagnetic substorm condition.

Stevens, N. J.↗

Vertical temperature and density patterns in the Arctic mesosphere analyzed as gravity waves

Three series of rocket soundings including pitot soundings, grenade soundings, and paired pitot-grenade soundings, were conducted from high latitude sites during winter. Temperature and wind profiles and one density profile were observed independently to obtain the thermodynamic structure, the wind structure, and thus their interdependence in the mesosphere. Temperature profiles from all soundings in each series were averaged, and a smooth curve (or series of smooth curves) drawn through the points. A hydrostatic atmosphere based on the average, measured temperature profile was computed, and deviations from the mean atmosphere were analyzed in terms of gravity wave theory. The vertical wavelengths of the deviations were 10-20 km, and the wave amplitudes slowly increased with height. The experimental data were matched by calculated gravity waves having a period ranging between 15 and 80 minutes and horizontal wavelengths of 60 to 280 km. The interpretation is generally consistent with the results of others who have studied gravity-acoustic waves in the atmosphere. The wind measurements are consistent with the thermodynamic measurements. The results also suggest that gravity waves traveled from east to west with a horizontal phase velocity of approximately 60 m/sec.

Eberstein, I. J.↗

Closed loop models for analyzing the effects of simulator characteristics

The optimal control model (OCM) of the human operator is used to develop closed-loop models for analyzing the effects of (digital) simulator characteristics on predicted performance and/or workload. Two approaches are considered: the first utilizes a continuous approximation to the discrete simulation in conjunction with the standard optimal control model; the second involves a more exact discrete description of the simulator in a closed-loop multi-rate simulation in which the optimal control model 'simulates' the pilot. Both models predict that simulator characteristics can have significant effects on performance and workload.

Baron, S.↗

Closed loop models for analyzing the effects of simulator characteristics

The optimal control model of the human operator is used to develop closed loop models for analyzing the effects of (digital) simulator characteristics on predicted performance and/or workload. Two approaches are considered: the first utilizes a continuous approximation to the discrete simulation in conjunction with the standard optimal control model; the second involves a more exact discrete description of the simulator in a closed loop multirate simulation in which the optimal control model simulates the pilot. Both models predict that simulator characteristics can have significant effects on performance and workload.

Baron, S.↗

A rocket-borne pulse-height analyzer for energetic particle measurements

The pulse-height analyzer basically resembles a time-sharing multiplexing data-acquisition system which acquires analog data (from energetic particle spectrometers) and converts them into digital code. The PHA simultaneously acquires pulse-height information from the analog signals of the four input channels and sequentially multiplexes the digitized data to a microprocessor. The PHA together with the microprocessor form an on-board real-time data-manipulation system. The system processes data obtained during the rocket flight and reduces the amount of data to be sent back to the ground station. Consequently the data-reduction process for the rocket experiments is speeded up. By using a time-sharing technique, the throughput rate of the microprocessor is increased. Moreover, data from several particle spectrometers are manipulated to share one information channel; consequently, the TM capacity is increased.

Leung, W.↗

Cometary particulate analyzer

A concept for determining the relative abundance of elements contained in cometary particulates was evaluated. The technique utilizes a short, high intensity burst of laser radiation to vaporize and ionize collected particulate material. Ions extracted from this laser produced plasma are analyzed in a time of flight mass spectrometer to yield an atomic mass spectrum representative of the relative abundance of elements in the particulates. Critical aspects of the development of this system are determining the ionization efficiencies for various atomic species and achieving adequate mass resolution. A technique called energy-time focus, which utilizes static electric fields to alter the length of the ion flight path in proportion to the ion initial energy, was used which results in a corresponding compression to the range of ion flight times which effectively improves the inherent resolution. Sufficient data were acquired to develop preliminary specifications for a flight experiment.

Friichtenicht, J. F.↗

Intertropical convergence zone ozone profiles from the Learjet ozone analyzer

An ozone analyzer operated as part of the sampling package aboard the NASA Learjet on each flight in the Panama ITCZ (Intertropical Convergence Zone) experiment. The measurement program was not successful because of instrument failure, apparently due to high humidity effects on one or more components of the ozone sensing instrument. A brief description of the experimental installation and some comments about an apparent correlation between very low ozone concentrations and cloud layers at altitude are presented.

Robinson, E.↗

Electrooptical model of the first retina layers of a visual analyzer

An electrooptical principle of converting and transmitting optical signals is proposed and used as the basis for constructing a model of the upper layers of the retina of the visual analyzer of animals. An evaluation of multichannel fibrous optical systems, in which the conversion of optical signals is based on the electrooptical principle, to model the upper retina layers is presented. The symbolic circuit of the model and its algorithm are discussed.

Chibalashvili, Y. L.↗

A gas filter correlation analyzer for methane

A fast-response instrument for monitoring CH4 was designed and tested using a modified nondispersive infrared technique. An analysis of the single-beam rotating-cell system is presented along with the signal processing circuit. A calibration of the instrument shows that the technique can be used to measure CH4 concentrations as small as 5 ppm-m and the effects of interfering gases are analyzed.

Sebacher, D. I.↗

Retarding potential analyzer for the Pioneer-Venus Orbiter Mission

The retarding potential analyzer on the Pioneer-Venus Orbiter Mission has been designed to measure most of the thermal plasma parameters within and near the Venusian ionosphere. Parameters include total ion concentration, concentrations of the more abundant ions, ion temperatures, ion drift velocity, electron temperature, and low-energy (0-50 eV) electron distribution function. To accomplish these measurements on a spinning vehicle with a small telemetry bit rate, several functions, including decision functions not previously used in RPA's, have been developed and incorporated into this instrument. The more significant functions include automatic electrometer ranging with background current compensation; digital, quadratic retarding potential step generation for the ion and low-energy electron scans; a current sampling interval of 2 ms throughout all scans; digital logic inflection point detection and data selection; and automatic ram direction detection. Extensive numerical simulation and plasma chamber tests have been conducted to verify adequacy of the design for the Pioneer Mission.

Knudsen, W. C.↗

Automated holographic drop-size analyzer

System analyzes drop-size distribution in liquid-droplet-spray combustion fields. Holographic camera takes "stop-motion" hologram of combustion volume; it is then viewed by vidicon camera connected to digital data-processing system that identifies particles or droplets, determining their size and count, and displays histogram of drop-size distribution in holographic field.

Feinstein, S. P.↗

Method for analyzing radiation sensitivity of integrated circuits

A method for analyzing the radiation sensitivity of an integrated circuit is described to determine the components. The application of a narrow radiation beam to portions of the circuit is considered. The circuit is operated under normal bias conditions during the application of radiation in a dosage that is likely to cause malfunction of at least some transistors, while the circuit is monitored for failure of the irradiated transistor. When a radiation sensitive transistor is found, then the radiation beam is further narrowed and, using a fresh integrated circuit, a very narrow beam is applied to different parts of the transistor, such as its junctions, to locate the points of greatest sensitivity.

Gauthier, M. K.↗

Closed loop models for analyzing engineering requirements for simulators

A closed loop analytic model, incorporating a model for the human pilot, (namely, the optimal control model) that would allow certain simulation design tradeoffs to be evaluated quantitatively was developed. This model was applied to a realistic flight control problem. The resulting model is used to analyze both overall simulation effects and the effects of individual elements. The results show that, as compared to an ideal continuous simulation, the discrete simulation can result in significant performance and/or workload penalties.

Baron, S.↗

Technique of electrical stimulation of the vestibular analyzer under clinical conditions

Vestibular reactions appear under the action of direct current (dc) on the labyrinth of man and animals. A decrease of the stimulation effect of dc on the extralabyrinthine nervous formations in the suggested method is achieved by the use of electric pulses with steep front and back parts, as well as by previous anesthetization of the skin in the electrode application area by means of novocain solution electrophoresis. For this purpose a pulse producer giving trapezoid pulses with smoothly changing fronts and duration was constructed. With the help of an interrupter it is possible to stop the current increase instantly, and stimulation is performed at the level of the pulse 'plateau'. To induce vestibular reactions under monopolar stimulation, it is necessary to apply the current twice as high as that with bipolar electrode position. The use of short pulses with steep front and back parts for electrode stimulation of the vestibular analyzer is considered to be inexpedient.

Khechinashvili, S. N.↗