Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Structural analysis, optical and dielectric function of [Ba{sub 0.9}Ca{sub 0.1}](Ti{sub 0.9}Zr{sub 0.1})O{sub 3} nanocrystals

This work presents the identification of inter-band transitions in the imaginary part of the dielectric function (ε{sub 2}) derived from the Kramers–Kronig analysis for [Ba{sub 0.9}Ca{sub 0.1}](Ti{sub 0.9}Zr{sub 0.1})O{sub 3} (BCZT) nanocrystals synthesized by the modified Pechini method. The analysis started with the chemical identification of the atoms that conform BCZT in the valence loss energy region of a high energy-resolution of electron energy loss spectroscopy. The indirect band energy (E{sub g}) was determined in the dielectric response function. This result is in agreement with the UV-Vis technique, and it obtained an optical band gap of 3.16 eV. The surface and volume plasmon peaks were observed at 13.1 eV and 26.2 eV, respectively. The X-ray diffraction pattern and the Rietveld refinement data of powders heat treated at 700 °C for 1 h suggest a tetragonal structure with a space group (P4 mm) with the average crystal size of 35 nm. The average particle size was determined by transmission electron microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamics of Water Molecules and Ions in Concentrated Lithium Chloride Solutions Probed with Ultrafast 2D IR Spectroscopy

Water and ion dynamics in concentrated LiCl solutions were studied using ultrafast 2D IR spectroscopy with the methyl thiocyanate (MeSCN) CN stretch as the vibrational probe. The IR absorption spectrum of MeSCN has two peaks, one peak for water associated with the nitrogen lone pair of MeSCN (W) and the other peak corresponding to Li + associated with the lone pair (L). To extract the spectral diffusion (structural dynamics) of W and L species, we developed a method that isolates the peak of interest by subtracting the 2D Gaussian proxies of multiple interfering peaks. Center line slope data (normalized frequency–frequency correlation function) for 2D bands from the W and L are fit with triexponential functions. The fastest component (1.1–1.6 ps) is assigned to local hydrogen bond length fluctuations. The intermediate timescale (~4.0 ps) corresponds to the hydrogen bond network rearrangement. The slowest component decays in ~40 ps and corresponds to ion pair and ion cluster dynamics. The very similar W and L spectral diffusion indicates that the motions of the water and ions are strongly coupled. Orientational relaxations of the W and L species were extracted using a new method to eliminate the effects of overlapping peaks. The results show that MeSCN bound to water undergoes orientational relaxation significantly faster than MeSCN bound to Li + . The orientational and spectral diffusion results are compared. In conclusion, a Stark coupling model is used to extract the root mean square average electric field caused by the ion clouds along the CN moiety as a function of concentration.

14 SOLAR ENERGY↗

ARPES detection of superconducting gap sign in unconventional superconductors

The superconducting gap symmetry is crucial in understanding the underlying superconductivity mechanism. Angle-resolved photoemission spectroscopy (ARPES) has played a key role in determining the gap symmetry in unconventional superconductors. However, it has been considered so far that ARPES can only measure the magnitude of the superconducting gap but not its phase; the phase has to be detected by other phase-sensitive techniques. Here we propose a method to directly detect the superconducting gap sign by ARPES. This method is successfully validated in a cuprate superconductor Bi 2 Sr 2 CaCu 2 O 8+δ with a well-known d-wave gap symmetry. When two bands have a strong interband interaction, the resulted electronic structures in the superconducting state are sensitive to the relative gap sign between the two bands. Our present work provides an approach to detect the gap sign and can be applied to various superconductors, particularly those with multiple orbitals like the iron-based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer oxidation on graphene sheets for tuning their oxidation levels, electrical conductivities, and band gaps

Graphene sheets that can exhibit electrical conducting and semiconducting properties are highly desirable and have potential applications in fiber communications, photodetectors, solar cells, semiconductors, and broadband modulators. However, there is currently no efficient method that is able to tune the band gap of graphene sheets. This paper adopts an efficient atomic layer oxidation (ALO) technique to cyclically increase the oxidation level of graphene sheets, thus, tuning their electrical conductance, band-gap structure, and photoluminescence (PL) response. The O/C atomic ratio as an increasing function of the ALO cycle number reflects two linear regions: 0.23% per cm 2 per cycle (0–15 cycles) and 0.054% per cm 2 per cycle (15–100 cycles). The excellent correlation coefficients reveal that the ALO process follows a self-limiting route to step-by-step oxidize graphene layers. The interlayer distance of ALO-graphene sheets shows an obvious increase after the ALO treatment, proved by X-ray diffraction. As analyzed by X-ray photon spectroscopy, the hydroxyl or epoxy group acts as a major contributor to the interlayer spacing distance and oxidation extent in the initial ALO stage, as compared to carbonyl and carboxyl groups. The ALO mechanism, based on Langmuir–Hinshelwood and Eley–Rideal models, is proposed to clarify the formation of oxygen functionalities and structural transformation from pristine graphene sheets to oxidized ones during the ALO cycle. With a tunable oxidation level, the electrical resistivity, semiconductor character, and PL response of ALO-graphene samples can be systematically controlled for desired applications. Finally, the ALO approach is capable of offering a straightforward route to tune the oxidation level of graphene sheets or other carbons.

36 MATERIALS SCIENCE↗

Active region of a functionally integrated laser – modulator

A method for the functional integration of injection lasers and modulators of generated light in a single heterostructure with spatially displaced quantum wells in the conduction and valence bands, formed by the second-type heterojunctions, is proposed. The structures and energy band diagrams of the active regions of functionally integrated lasers – modulators with amplitude and frequency modulation are considered. A physical – topological model and a technique for numerical simulation of lasers – modulators is proposed. It is shown that the maximum modulation frequencies for the proposed heterostructures, in contrast to the same frequencies implemented under pump current modulation, are not limited by the duration of transients in the laser power supply circuit and the carrier lifetime in the laser active region but are determined by the photon lifetime in the cavity. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quasiparticle and Optical Properties of Rutile and Anatase Ti2O2

Quasiparticle excitation energies and optical properties of TiO{sub 2} in the rutile and anatase structures are calculated using many-body perturbation-theory methods. Calculations are performed for a frozen crystal lattice; electron-phonon coupling is not explicitly considered. In the GW method, several approximations are compared and it is found that inclusion of the full frequency dependence as well as explicit treatment of the Ti semicore states are essential for accurate calculation of the quasiparticle energy-band gap. The calculated quasiparticle energies are in good agreement with available photoemission and inverse photoemission experiments. The results of the GW calculations, together with the calculated static screened Coulomb interaction, are utilized in the Bethe-Salpeter equation to calculate the dielectric function {epsilon}{sub 2}({omega}) for both the rutile and anatase structures. The results are in good agreement with experimental observations, particularly the onset of the main absorption features around 4 eV. For comparison to low-temperature optical-absorption measurements that resolve individual excitonic transitions in rutile, the low-lying discrete excitonic energy levels are calculated with electronic screening only. The lowest energy exciton found in the energy gap of rutile has a binding energy of 0.13 eV. In agreement with experiment, it is not dipole allowed but the calculated exciton energy exceeds that measured in absorption experiments by about 0.22 eV and the scale of the exciton binding energy is also too large. The quasiparticle energy alignment of rutile is calculated for nonpolar (110) surfaces. In the GW approximation, the valence-band maximum is 7.8 eV below the vacuum level, showing a small shift from density-functional theory results.

36 MATERIALS SCIENCE↗

Luminescence, structure and antiferroelectric-type phase transition in Ca8ZnEu(PO4)7

Highlights: • Thermal, dielectric and luminescence properties were obtained for Ca{sub 8}ZnEu(PO{sub 4}){sub 7}. • Ca{sub 8}ZnEu(PO{sub 4}){sub 7} belongs to antiferroelectric with T{sub c} = 836 K. • First-order antiferroelectric/paraelectric phase transitions have been found. • Influence of composition on the luminescence properties has been shown. • Structure of Ca{sub 8}ZnEu(PO{sub 4}){sub 7} was refined by the Rietveld method. - Abstract: Photoluminescence excitation and emission spectra of new phosphate Ca{sub 8}ZnEu(PO{sub 4}){sub 7} have been investigated. The influence of the composition on the luminescence intensity has been shown. The substitution of Zn{sup 2+} for Ca{sup 2+} in Ca{sub 9}Eu(PO{sub 4}){sub 7} with the formation of Ca{sub 8}ZnEu(PO{sub 4}){sub 7} leads to the increased emission intensity {sup 5}D{sub 0} → {sup 7}F{sub 2} by about 1.5 times and to decreased number of bands from three to one in the range of {sup 5}D{sub 0} → {sup 7}F{sub 0} transition. Conditions of preparation do not influence the luminescent properties and distribution of Eu{sup 3+} cations in the structure. DSC, SHG data and dielectric spectroscopy reveal that Ca{sub 8}ZnEu(PO{sub 4}){sub 7} belongs to antiferroelectrics (T{sub c} = 836 K). The first-order antiferroelectric/paraelectric transformations are accompanied by a changing symmetry (R3-barC to R3-barm). The structure of Ca{sub 8}ZnEu(PO{sub 4}){sub 7} (sp. gr. R3-barc) was refined by the Rietveld method. The Zn{sup 2+} cations occupy the M5 site. The Eu{sup 3+} and Ca{sup 2+} ions are located in the M1 and M3 sites of β-Ca{sub 3}(PO{sub 4}){sub 2}-type structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculated electronic, transport, and related properties of zinc blende boron arsenide (zb-BAs)

Here, we present the results from ab-initio, self-consistent density functional theory (DFT) calculations of electronic, transport, and bulk properties of zinc blende boron arsenide. We utilized the local density approximation potential of Ceperley and Alder, as parameterized by Vosko and his group, the linear combination of Gaussian orbitals formalism, and the Bagayoko, Zhao, and Williams (BZW) method, as enhanced by Ekuma and Franklin (BZW-EF), in carrying out our completely self-consistent calculations. With this method, the results of our calculations have the full, physical content of density functional theory (DFT). Our results include electronic energy bands, densities of states, effective masses, and the bulk modulus. Our calculated, indirect band gap of 1.48 eV, from C to a conduction band minimum close to X, for the room temperature lattice constant of 4.777 Å, is in an excellent agreement with the experimental value of 1.46 6 0.02 eV. We thor-oughly explain the reasons for the excellent agreement between our findings and corresponding, experimental ones. This work provides a confirmation of the capability of DFT to describe accu-rately properties of materials, provides a confirmation of the capability of DFT to describe accu-rately properties of materials, if the computations adhere strictly to the conditions of validity of DFT, as done by the BZW-EF method.

36 MATERIALS SCIENCE↗

Structural stability and electronic properties of β-tetragonal boron: A first-principles study

It is known that elemental boron has five polymorphs: α- and β-rhombohedral, α- and β-tetragonal, and the high-pressure γ phase. β-tetragonal (β-t) boron was first discovered in 1960, but there have been only a few studies since then. We have thoroughly investigated, using first-principles calculations, the atomic and electronic structures of β-t boron, the details of which were not known previously. The difficulty of calculation arises from the fact that β-t boron has a large unit cell that contains between 184 and 196 atoms, with 12 partially-occupied interstitial sites. This makes the number of configurations of interstitial atoms too great to calculate them all. By introducing assumptions based on symmetry and preliminary calculations, the number of configurations to calculate can be greatly reduced. It was eventually found that β-t boron has the lowest total energy, with 192 atoms (8 interstitial atoms) in an orthorhombic lattice. The total energy per atom was between those of α- and β-rhombohedral boron. Another tetragonal structure with 192 atoms was found to have a very close energy. The valence bands were fully filled and the gaps were about 1.16 to 1.54 eV, making it comparable to that of β-rhombohedral boron. - Graphical abstract: Electronic density distribution for the lowest-energy configuration (N=192) viewed from the 〈1 0 0〉 direction. Left: isosurface (yellow) at d=0.09 electrons/a.u.{sup 3} Right: isosurface (orange) at d=0.12 electrons/a.u.{sup 3}. - Highlights: • β-tetragonal boron was thoroughly investigated using first-principles calculations. • The lowest energy structure contains 192 atoms in an orthorhombic lattice. • Another tetragonal structure with 192 atoms has a very close energy. • The total energy per atom is between those of α- and β-rhombohedral boron. • The band gap of the lowest energy structure is about 1.16 to 1.54 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structures and photocatalytic activities of microcrystalline ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) powders

Microcrystalline ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) photocatalysts were successfully synthesized by a citrate complex method. The as-prepared samples were characterized by the X-ray diffraction technique, BET surface area analysis, UV-vis diffuse reflectance spectrum, transmission electron microscopy, X-ray photoelectron spectroscopy and inductively coupled plasma-atomic emission spectrometry. The results indicated that single-phase orthorhombic SrBi{sub 2}Nb{sub 2}O{sub 9} could be obtained after being calcined above 650 {sup o}C, while BaBi{sub 2}Nb{sub 2}O{sub 9} was tetragonal. Based on the diffuse reflectance spectra, the band gaps of the obtained samples were calculated to be around 3.34-3.54 eV. For the photocatalytic redox reaction of methyl orange under UV-light irradiation, SrBi{sub 2}Nb{sub 2}O{sub 9} exhibited higher photocatalytic activity than that of BaBi{sub 2}Nb{sub 2}O{sub 9}. The effects of the crystallinities, BET surface areas and crystal structures of the samples on the photocatalytic activities were discussed in detail. -- Graphical abstract: Aurivillius-type ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) photocatalysts were successfully synthesized by a citrate complex method. SrBi{sub 2}Nb{sub 2}O{sub 9} and BaBi{sub 2}Nb{sub 2}O{sub 9} showed different photocatalytic performances in the redox reaction of methyl orange (MO) under UV-light ({lambda}=254 nm), due to the different crystal structures of ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba). Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

VNb{sub 9}O{sub 25-{delta}}-Synthesis, electrical conducting behaviour and density functional theory (DFT) calculation

In order to investigate the influence of the oxygen partial pressure (p(O{sub 2})) on the electrical conductivity, VNb{sub 9}O{sub 25} was prepared by thermal decomposition of freeze-dried oxalate precursors and by a solid state reaction of V{sub 2}O{sub 5}/Nb{sub 2}O{sub 5} mixtures. The samples were characterised by X-ray diffraction, grain size analysis and scanning electron microscopy (SEM). The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. Partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap. The calculated activation energy values are in good agreement with the experimental ones. - Graphical Abstract: The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. The partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap.

36 MATERIALS SCIENCE↗

Combustion synthesis of MgO nanoparticles using plant extract: Structural characterization and photoluminescence studies

Magnesium oxide nanoparticles (MgO Nps) have been successfully synthesized via solution combustion method using Parthenium plant extract as fuel for the first time. Powder X-ray diffraction (PXRD) pattern reveal that product belongs to the cubic phase (Periclase). FTIR spectrum shows the band at 822 cm{sup −1} indicates the formation of cubic periclase MgO. The optical band gap of MgO Nps estimated from UV –Vis spectrum was found to be in the range 5.40–5.45 eV. SEM images showed that, the product is agglomerated and particle in nature. Photoluminescence (PL) studies shows violet emission at 390 nm, blue emission at 470 nm and green emission at 550 nm. MgO Nps shows good photocatalytic activity for the degradation of methylene blue (MB) dye under UV/Sun light irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

INFRARED ECLIPSES OF THE STRONGLY IRRADIATED PLANET WASP-33b, AND OSCILLATIONS OF ITS HOST STAR

We observe two secondary eclipses of the strongly irradiated transiting planet WASP-33b, in the K{sub s} band at 2.15 {mu}m, and one secondary eclipse each at 3.6 {mu}m and 4.5 {mu}m using Warm Spitzer. This planet orbits an A5V {delta}-Scuti star that is known to exhibit low-amplitude non-radial p-mode oscillations at about 0.1% semi-amplitude. We detect stellar oscillations in all of our infrared eclipse data, and also in one night of observations at J band (1.25 {mu}m) out of eclipse. The oscillation amplitude, in all infrared bands except K{sub s} , is about the same as in the optical. However, the stellar oscillations in K{sub s} band (2.15 {mu}m) have about twice the amplitude (0.2%) as seen in the optical, possibly because the Brackett-{gamma} line falls in this bandpass. As regards the exoplanetary eclipse, we use our best-fit values for the eclipse depth, as well as the 0.9 {mu}m eclipse observed by Smith et al., to explore possible states of the exoplanetary atmosphere, based on the method of Madhusudhan and Seager. On this basis we find two possible states for the atmospheric structure of WASP-33b. One possibility is a non-inverted temperature structure in spite of the strong irradiance, but this model requires an enhanced carbon abundance (C/O > 1). The alternative model has solar composition, but an inverted temperature structure. Spectroscopy of the planet at secondary eclipse, using a spectral resolution that can resolve the water vapor band structure, should be able to break the degeneracy between these very different possible states of the exoplanetary atmosphere. However, both of those model atmospheres absorb nearly all of the stellar irradiance with minimal longitudinal re-distribution of energy, strengthening the hypothesis of Cowan and Agol that the most strongly irradiated planets circulate energy poorly. Our measurement of the central phase of the eclipse yields ecos {omega} = 0.0003 {+-} 0.00013, which we regard as being consistent with a circular orbit.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-618: Plan Robustness Study of Volumetric-Modulated Arc Therapy Vs. Intensity-Modulated Radiation Therapy for Head and Neck Cancer

Purpose: Lack of plan robustness may contribute to local failure in volumetric-modulated arc therapy (VMAT) to treat head and neck (H&N) cancer. Thus we compared plan robustness of VMAT with intensity-modulated radiation therapy (IMRT). Methods: VMAT and IMRT plans were created for 9 H&N cancer patients. For each plan, six new perturbed dose distributions were computed — one each for ± 3mm setup deviations along the S-I, A-P and L-R directions. We used three robustness quantification tools: (1) worst-case analysis (WCA); (2) dose-volume histograms (DVHs) band (DVHB); and (3) root-mean-square-dose deviation (RMSD) volume histogram (DDVH). DDVH represents the relative volume (y) on the vertical axis and the RMSD (x) on the horizontal axis. Similar to DVH, this means that y% of the volume of the indicated structure has the RMSD at least x Gy[RBE].The width from the first two methods at different target DVH indices (such as D95 and D5) and the area under the DDVH curves (AUC) for the target were used to indicate plan robustness. In these robustness quantification tools, the smaller the value, the more robust the plan is. Plan robustness evaluation metrics were compared using Wilcoxon test. Results: DVHB showed the width at D95 from IMRT to be larger than from VMAT (unit Gy) [1.59 vs 1.18 (p=0.49)], while the width at D5 from IMRT was found to be slightly larger than from VMAT [0.59 vs 0.54 (p=0.84)]. WCA showed similar results [D95: 3.28 vs 3.00 (p=0.56); D5: 1.68 vs 1.95 (p=0.23)]. DDVH showed the AUC from IMRT to be slightly smaller than from VMAT [1.13 vs 1.15 (p=0.43)]. Conclusion: VMAT plan robustness is comparable to IMRT plan robustness. The plan robustness conclusions from WCA and DVHB are DVH parameter dependent. On the other hand DDVH captures the overall effect of uncertainties on the dose to a volume of interest. NIH/NCI K25CA168984; Eagles Cancer Research Career Development; The Lawrence W. and Marilyn W. Matteson Fund for Cancer Research Mayo ASU Seed Grant; The Kemper Marley Foundation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

UTa{sub 2}O(S{sub 2}){sub 3}Cl{sub 6}: A ribbon structure containing a heterobimetallic 5d-5f M{sub 3} cluster

A new solid-state compound containing a heterobimetallic cluster of U and Ta, UTa{sub 2}O(S{sub 2}){sub 3}Cl{sub 6}, has been synthesized and its structure has been characterized by single-crystal X-ray diffraction methods. UTa{sub 2}O(S{sub 2}){sub 3}Cl{sub 6} was synthesized from UCl{sub 4} and Ta{sub 1.2}S{sub 2} at 883 K. The O is believed to have originated in the Ta{sub 1.2}S{sub 2} reactant. The compound crystallizes in the space group P1-bar of the triclinic system. The structure comprises a UTa{sub 2} unit bridged by mu{sub 2}-S{sub 2} and mu{sub 3}-O groups. Each Ta atom bonds to two mu{sub 2}-S{sub 2}, the mu{sub 3}-O, and two terminal Cl atoms. Each U atom bonds to two mu{sub 2}-S{sub 2}, the mu{sub 3}-O, and four Cl atoms. The Cl atoms bridge in pairs to neighboring U atoms to form a ribbon structure. The bond distances are normal and are consistent with formal oxidation states of +IV/+V/-II/-I/-I for U/Ta/O/S/Cl, respectively. The optical absorbance spectrum displays characteristic transition peaks near the absorption edge. Density functional theory was used to assign these peaks to transitions between S{sup 1-} valence-band states and empty U 5f-6d hybrid bands. Density-of-states analysis shows overlap between Ta 5d and U bands, consistent with metal-metal interactions. - The UTa2O(S2)3Cl6 cluster with completed coordination sphere around uranium

36 MATERIALS SCIENCE↗

Half-Metallic Ferromagnetism in V-Doped FmP Binary Monopnictide Compounds: an Ab Initio Calculations

The ab initio calculations of the structural phase stability, magnetic phase stability, and electronic and magnetic properties of the FmP binary monopnictides and the half-metallic ferromagnetic properties of their Fm{sub 1−x}V{sub x}P (for x = 0.25, 0.50, 0.75, and 1)-doped alloys have been assured through the spin-polarized density functional theory (DFT), and they are performed by employing the full-potential linearized augmented plane waves plus local orbitals (FP-L/APW + lo) method that is implemented in the WIEN2k package. The exchange and correlation potential is parameterized by the generated gradient approximation (GGA) of Perdew-Burke-Ernzerhof (PBE) scheme. According to the studies of the magnetic phase stability, the fermium monopnictides (FmP) have a paramagnetic regime, while the ferromagnetic behavior appears when we dope this compound with vanadium. Through the ferromagnetic character of all Fm{sub 1−x}V{sub x}P alloys, the spin-polarized band structures and densities of states exhibit a nearly half-metallic character of Fm{sub 0.75}V{sub 0.25}P alloy, whereas Fm{sub 0.50}V{sub 0.50}P, Fm{sub 0.25}V{sub 0.75}P, and VP compounds showed metallic character. Moreover, the total magnetic moment of the three ternary alloys is mainly contributed by Fm and V elements, where the p-d hybridization reduces the atomic magnetic moment of V element from its free space charge and produces feeble magnetic moments on the nonmagnetic P sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and Magnetic Investigations of Rare-Earth Tm-doped AlGaN Ternary Alloy

Electronic structure and magnetic interaction of substitutional thulium rare earth-doped wurtzite Al{sub 0.5}Ga{sub 0.5}N ternary alloy have been performed using density-functional theory within local spin-density approximation with Hubbard-U corrections (LSDA+U) approach. The LSDA+U method is applied to the rare earth (RE) 4f states. The calculation of formation energy shows that it is more energetically favorable for a substitutional Tm atom to replace the Al atom than the Ga atom. For AlGaN:Tm, the lattices parameters are expanded due to larger ionic radius of Tm than that of Al atoms. The energy band gap of AlGaN:Tm has direct character and its width becomes small compared with that of AlGaN. The magnetic coupling between Tm ions in the nearest neighbor sites is ferromagnetic. Magnetic interaction of rare earth ion with the host states at the valence and conduction band edges has been investigated and compared to those of GaN:Mn and has been found to be relatively small.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and optical properties of Sr{sub 2}SnO{sub 4} studied with FP-LAPW method in density functional theory

Oxide material of Sr{sub 2}SnO{sub 4}, when it is doped with Ti becomes a phosphor material that can emit intense blue light at room temperature. It is important to study the electronic structure of this material in order to determine the optical processes that occur in Ti-doped Sr{sub 2}SnO{sub 4}. Electronic structure and optical properties of Sr{sub 2}SnO{sub 4} is studied using density functional theory framework with full potential linearized augmented plane waves plus local orbitals (FP-LAPW+lo) method. We use modified Becke-Johnson (mBJ) exchange-correlation potential to calculate the energy gap. Our calculation showed that Sr{sub 2}SnO{sub 4} has indirect band gap with band gap energy of around 4.2 eV. The experimental absorption spectra of Sr{sub 2}SnO{sub 4} indicated that this oxide has band gap of around 4.6 eV and it is closer to the results given by mBJ exchange-correlation potential. We also studied other optical properties of Sr{sub 2}SnO{sub 4} and it is found in agreement with the experimental results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗