Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

In Silico Discovery of Covalent Organic Frameworks for Carbon Capture

We screen a database of more than 69 000 hypothetical covalent organic frameworks (COFs) for carbon capture using parasitic energy as a metric. To compute CO 2 –framework interactions in molecular simulations, we develop a genetic algorithm to tune the charge equilibration method and derive accurate framework partial charges. Nearly 400 COFs are identified with parasitic energy lower than that of an amine scrubbing process using monoethanolamine; more than 70 are better performers than the best experimental COFs and several perform similarly to Mg-MOF-74. We analyze the effect of pore topology on carbon capture performance to guide the development of improved carbon capture materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Extended Aging and Oxidation on Linear Poly(propylenimine)-Mesoporous Silica Composites for CO 2 Capture from Simulated Air and Flue Gas Streams

Physical aging or degradation of amine-containing polymers and supported amine adsorbents is a critical issue that could limit practical application of such materials for CO 2 capture. However, to date, there is a scarcity of studies that evaluate the long-term stability of amine-based sorbents without the exclusive use of accelerated aging tests. Here, we demonstrate that extended aging (~2 years) of linear poly(propylenimine) (LPPI) confined in mesoporous silica (SBA-15) supports does not drastically impact the CO 2 adsorption performance under simulated flue gas (10% CO 2 ) and direct air capture (DAC, 400 ppm CO 2 ) conditions, although the behavior of the aged sorbents and polymers in the two CO 2 concentration regimes differs. Sorbents made with aged LPPI had modestly decreased CO 2 uptake performance (<~20% lower) compared to the fresh polymers, with overall good CO 2 cycling performance. The data indicate that only slow degradation occurs under the deployed ambient storage conditions. Even after extended aging, the LPPI-based sorbents preserved their ability to display stable temperature-swing cycling performance. In parallel, the impact of blending LPPI polymers of different number-average molecular weights, M n , is evaluated, seeking to understand its impact on adsorbent performance. We find that the results demonstrate that blends of two M n aged LPPI give similar CO 2 adsorption performance to adsorbents made from a single M n LPPI, suggesting that molecular weight will not negatively impact adsorbent performance in the studied M n range. After an accelerated oxidation experiment, the aged LPPI sorbents retained a larger portion of the samples’ original performance when cycling under simulated flue gas conditions than under DAC conditions. However, in each case, the oxidized sorbents could be cycled repeatedly with consistent uptake performance. Overall, these first of their kind extended aging tests suggest that LPPI-based amine adsorbents offer promise for long term, stable use in carbon capture applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Modeling and Control Studies of a Two-Stage Bubbling Fluidized Bed Adsorber-Reactor for Solid-Sorbent CO{sub 2} Capture

A one-dimensional, non-isothermal, pressure-driven dynamic model has been developed for a two-stage bubbling fluidized bed (BFB) adsorber-reactor for solid-sorbent carbon dioxide (CO{sub 2}) capture using Aspen Custom Modeler® (ACM). The BFB model for the flow of gas through a continuous phase of downward moving solids considers three regions: emulsion, bubble, and cloud-wake. Both the upper and lower reactor stages are of overflow-type configuration, i.e., the solids leave from the top of each stage. In addition, dynamic models have been developed for the downcomer that transfers solids between the stages and the exit hopper that removes solids from the bottom of the bed. The models of all auxiliary equipment such as valves and gas distributor have been integrated with the main model of the two-stage adsorber reactor. Using the developed dynamic model, the transient responses of various process variables such as CO{sub 2} capture rate and flue gas outlet temperatures have been studied by simulating typical disturbances such as change in the temperature, flowrate, and composition of the incoming flue gas from pulverized coal-fired power plants. In control studies, the performance of a proportional-integral-derivative (PID) controller, feedback-augmented feedforward controller, and linear model predictive controller (LMPC) are evaluated for maintaining the overall CO{sub 2} capture rate at a desired level in the face of typical disturbances.

42 ENGINEERING↗

Absolute cross sections for electron loss, electron capture, and multiple ionization in collisions of C{sup 3+} with noble gases

Absolute charge-state-correlated cross sections for projectile electron loss, electron capture, and target multiple ionization in collisions between C{sup 3+} ions and noble gases have been measured for energies between 1.3 and 3.5 MeV. The data have been compared with other similar absolute cross sections existent in the literature for several projectiles. Calculations for the single-loss-multiple-ionization channel have been performed for the screening mode, using both an extended version of the classical-impulse free-collision model and the plane-wave Born approximation (PWBA), and for the antiscreening mode within the PWBA. The energy dependence of the average number of target active electrons which contribute to the antiscreening has been described by means of a simple function, which is ''universal'' for noble gases but, in principle, projectile dependent. A method has been developed to obtain the number of active target electrons for each subshell in the high-velocity regime, which presented physically reasonable results. Analyses of the dependences of the single-capture and transfer-ionization (SC and TI, respectively) processes on the projectile charge states showed that, for He, equally charged bare and dressed projectiles have very similar cross sections; the latter thus acting as structureless point charges. A behavior similar to that in the SC has been observed for the pure single ionization of He by projectiles with different charge states and of the other noble gases by singly charged projectiles. It has been shown that the q{sup 2} dependence of the pure-single and total-ionization cross sections, predicted by first-order models, is only valid for high-collision velocities. For slower collisions, the electron capture process becomes more relevant and competes with the ionization channel, a feature which grows in importance as the projectile charge state increases.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron-capture cross sections for Li{sup +} colliding on H and H{sub 2} in the low-keV energy region

Absolute total and differential cross sections have been measured for neutral Li formation in single collisions of Li{sup +} on H{sub 2} from 1 to 5 keV. Total cross sections were obtained by direct integration of measured differential cross sections and are in good agreement with earlier cross-sectional measurements. A comparison of the differential cross sections plotted as a function of the reduced variables {theta}sin{theta}d{sigma}/d{Omega} vs E{theta} is also presented with a comparison of the maximum of the curves of the present data. Theoretically, we report state to state and summed charge transfer at collision energies ranging from 0.1 to 25 keV/amu. Cross sections were calculated using a nonadiabatic time-dependent direct approach for study of ion-atom and ion-molecule interaction processes. We verify that the main electron-capture channel is in the n=2 state of Li with a large probability for electron capture for impact parameters below 2 a.u. for collisions on both H and H{sub 2} in the so-called rotational region of the collision. In the case of atomic hydrogen, the electron-capture probability into the 2s and 2p states shows an oscillating behavior that smooths out when summed. For the molecular case, we find that for projectile energies larger than 1 keV, ionization effects become important. Our results show good agreement when compared to other available experimental and theoretical data.

74 ATOMIC AND MOLECULAR PHYSICS↗

Single-electron-capture processes in collisions of He{sup 2+}, Li{sup q+} (q=1,2,3), C{sup 6+}, and O{sup 8+} ions with helium

Cross sections for single-electron capture in collisions of He{sup 2+}, Li{sup q+} (q = 1,2,3), C{sup 6+}, and O{sup 8+} ions with helium atoms at incident energy ranging from 50 to 5000 keV/amu have been calculated in the framework of four-body boundary-corrected continuum intermediate state (BCCIS-4B) approximation in both prior and post forms. In this formalism, distortion in the final channel related to the Coulomb continuum states of the projectile ion and the active electron in the field of residual target ion are included. In all cases, total single-electron-capture cross sections have been calculated by summing over all contributions up to n = 3 shells and subshells, respectively. It has been observed that the contribution of the capture cross section into the excited states is significant for asymmetric collision (Z{sub P}>Z{sub T}) and is insignificant for symmetric collision. Numerical results for the total cross sections show good agreement with the available experimental findings, particularly in the post form. Post-prior discrepancy has been found to be within 30% except for Li{sup +} + He interactions below 150 keV/amu.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron emission from single-electron capture with simultaneous single-ionization reactions in 30-keV/u He{sup 2+}-on-argon collisions

Electron emission from the single-electron capture with simultaneous single ionization in 30 keV/u He{sup 2+} on argon was investigated using a reaction microscope, providing the electron energy spectra and momentum distributions. Intensive peaks for electrons with near-zero kinetic energies have been observed. It is demonstrated that mechanisms contributing to the electron emission include direct transfer ionization (DTI), double-electron capture with autoionization (DECA), and single-electron capture with autoionization (SECA) of target. Comparison of resonance energies shows that Ar{sup +} ions in SECA decay mainly through the 3s3p{sup 5}3d states by emitting Auger electrons, and He** in DECA decay through the 2l2l' states. The dependence of electron emission on the transverse momentum exchange has been studied. In the transfer ionization channel studied here, the DTI process dominates the electron emission, and no saddle point electron mechanism has been found.

74 ATOMIC AND MOLECULAR PHYSICS↗

Q values for neutrinoless double-electron capture in {sup 96}Ru, {sup 162}Er, and {sup 168}Yb

The Q values of the neutrinoless double-electron capture transitions in {sup 96}Ru, {sup 162}Er, and {sup 168}Yb have been determined by Penning-trap mass-ratio measurements. Based on our new high-precision results for the Q values, neither of these transitions shows a resonant enhancement of the capture rate. At present, this excludes these nuclides from the list of suitable candidates in the search for neutrinoless double-electron capture.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Positive Power with Negative Emission Flexible NGCC Enable by Modular Direct Air Capture (Final Report)

The primary project objective was to synthesize a retrofit design of a natural gas combined cycle plant (Fseries gas turbines in 2x1 configuration) to integrate post-combustion (PCC) and direct air carbon capture (DAC) systems that could produce power with negative emissions across a wide range of loads, see table below. The IP-LP crossover and LP steam system of the NGCC were reconfigured to enable 97% CO2 capture in the PCC system at all loads, and heat integration with the DAC reduced the parasitic load of carbon capture by recovering the heat of condensation of the steam. Similar results were found for Hseries gas turbines.

03 NATURAL GAS↗

Complex radius in the R-matrix algorithm for inclusion of direct capture component [Slides]

In the low-energy range there are two possible physical mechanisms for γ-ray emissions. While both mechanisms emit γ-rays, the compound radiative capture (CRC) process is generated by the formation of a compound nucleus state before γ-emission. CRC has a characteristic resonance structure in the cross section, The direct radiative capture (DRC) process goes to the final state by the electromagnetic radiation of the incident neutron. DRC has a smooth behavior in the cross section. For light nuclei, a non-negligible component of the neutron capture process can be often associated to DRC process. Although these two mechanisms should be described by a unified theoretical formalism, in the nuclear data libraries, the CRC and DRC components are evaluated and reported separately. The updated R-matrix algorithm will allow the ability to implicitly include correlations between CRC and DRC mechanisms, to improve the quality of nuclear data evaluations, and to facilitate simple large-scale applicability to current nuclear data evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Industrial Carbon Capture from a Cement Facility Using the Cryocap™ FG Process

The objective of the project was to execute and complete front-end engineering and design (FEED) studies for commercial-scale, carbon capture projects that separate 95% of the total CO 2 emissions at an industrial facility, producing at least 100,000 metric tonnes/year of CO 2 for sequestration. The industrial facility selected is the Holcim (US) Ste. Genevieve cement manufacturing facility (the largest single kiln line in the world), while the carbon capture system selected is Pressure Swing Adsorption system (PSA) assisted Cryocap™ technology developed by Air Liquide. The industrial host site emits approximately 3 million tonnes CO 2 /year based on plant data from 2020-2022. The captured CO 2 will meet the requirements of transport (Pipeline Grade) and geological storage, and the geological storage facilities within 80 miles of the CO 2 source. The impact of the project on Environmental Justice and the regional economy was also analyzed.

01 COAL, LIGNITE, AND PEAT↗

Carbon Capture Plant Front-End Engineering Design Study for Cement Manufacturing

The objective of this project was to conduct a Front-End Engineering Design (FEED) study for capturing carbon dioxide (CO₂) from cement plant flue gas using non-aqueous solvents (NAS) with a 95% capture efficiency. The study aimed to develop AACE (Association for the Advancement of Cost Engineering) Class 3 cost estimates for a commercial-scale CO₂ capture system with a capacity of 2.4 million tonnes of CO₂ per year (t-CO₂/yr). The results will provide Cemex and the U.S. Department of Energy with reliable data to support investment decisions, evaluate economic feasibility, and guide future project development and implementation.

20 FOSSIL-FUELED POWER PLANTS↗

Engineering-Scale Test of a Water-Lean Solvent for Post-Combustion Capture

EPRI, Pacific Northwest National Laboratory, RTI International, and their project collaborators developed an engineering-scale test of a new water-lean solvent, N-(2-ethoxyethyl)-3-morpholinopropan-1-amine (EEMPA or 2-EEMPA) as a post-combustion CO 2 capture solvent for power plant applications. This test was conducted using the Pilot Solvent Test Unit at the National Carbon Capture Center. The primary objective of this test was to collect long-term data operating EEMPA with both coal- and natural gas-representative flue gases at the approximately 0.5 MW e -equivalent scale (5–10 metric tons CO 2 /day captured). This report details the activities preparing for that test, data collected during the test campaign, and analyses and interpretations of that data.

20 FOSSIL-FUELED POWER PLANTS↗

Crystal Engineering of Hydrogen Bonding for Direct Air Capture of CO2: A Quantum Crystallography Perspective

Rising atmospheric CO2 levels demand efficient and sustainable carbon capture solutions. Direct air capture (DAC) via crystallizing hydrogen-bonded frameworks such as carbonate salts has emerged as a promising approach. This review explores the potential of crystal engineering, in tandem with advanced quantum crystallography techniques and computational modeling, to unlock the full potential of DAC materials. We examine the critical role of hydrogen bonding and other noncovalent interactions within a family of bis-guanidines that governs the formation of carbonate salts with high CO2 capture capacity and low regeneration energies for utilization. Quantum crystallography and charge density analysis prove instrumental in elucidating these interactions. A case study of a highly insoluble carbonate salt of a 2,6-pyridine-bis-(iminoguanidine) exemplifies the effectiveness of these approaches. However, challenges remain in the systematic and precise determination of hydrogen atom positions and atomic displacement parameters within DAC materials using quantum crystallography, and limitations persist in the accuracy of current energy estimation models for hydrogen bonding interactions. Future directions lie in exploring diverse functional groups, designing advanced hydrogen-bonded frameworks, and seamlessly integrating experimental and computational modeling with machine learning. This synergistic approach promises to propel the design and optimization of DAC materials, paving the way for a more sustainable future.

36 MATERIALS SCIENCE↗

IMPACCT: Carbon Capture Technology

IMPACCT Project: IMPACCT’s 15 projects seek to develop technologies for existing coal-fired power plants that will lower the cost of carbon capture. Short for “Innovative Materials and Processes for Advanced Carbon Capture Technologies,” the IMPACCT Project is geared toward minimizing the cost of removing carbon dioxide (CO2) from coal-fired power plant exhaust by developing materials and processes that have never before been considered for this application. Retrofitting coal-fired power plants to capture the CO2 they produce would enable greenhouse gas reductions without forcing these plants to close, shifting away from the inexpensive and abundant U.S. coal supply.

ARPA-E↗

Metal Organic Framework Research: High Throughput Discovery of Robust Metal Organic Framework for CO2 Capture

IMPACCT Project: LBNL is developing a method for identifying the best metal organic frameworks for use in capturing CO2 from the flue gas of coal-fired power plants. Metal organic frameworks are porous, crystalline compounds that, based on their chemical structure, vary considerably in terms of their capacity to grab hold of passing CO2 molecules and their ability to withstand the harsh conditions found in the gas exhaust of coal-fired power plants. Owing primarily to their high tunability, metal organic frameworks can have an incredibly wide range of different chemical and physical properties, so identifying the best to use for CO2 capture and storage can be a difficult task. LBNL uses high-throughput instrumentation to analyze nearly 100 materials at a time, screening them for the characteristics that optimize their ability to selectively adsorb CO2 from coal exhaust. Their work will identify the most promising frameworks and accelerate their large-scale commercial development to benefit further research into reducing the cost of CO2 capture and storage.

ARPA-E↗

A Model of Large Scale Electrochemical Direct Ocean Capture Under Variable Power

Since limiting warming to 1.5 degrees C by 2100 will not only require an energy transition but also billions of tons of carbon dioxide (CO2) removal per year, it is essential to expand these efforts. This can be done offshore via electrochemical direct ocean capture (eChem DOC) which extracts CO2 from seawater that can later be stored underground or converted to products. Deployments of eChem DOC will be powered by renewable energy and therefore need to function with variable power inputs. This project aims to support future large-scale deployments by developing a model of eChem DOC operation, informed by industry and literature, and assessing its performance under variable power and varying designs. Initial analysis suggests that discretizing the eChem system has a higher impact on increasing overall capture than storing the chemical solutions to continue capture during periods of lower power availability, but this is likely situation dependent. Future work will use more realistic power profiles.

direct ocean capture↗

Negative Charge Confined Amine Carriers within the Nanowire Network for Stable and Efficient Membrane Carbon Capture

Membrane-based carbon dioxide (CO 2 ) capture has attracted great research interest owing to its potential for higher separation efficiency and lower energy consumption. However, it is still a challenging task to capture CO 2 with membrane from flue gas, especially under moderate-temperature and high-humidity conditions. Here, a stable CO 2 -selective membrane that can operate at temperatures up to 90 °C and under high humidity is reported. The positively charged amine carriers for CO 2 are confined within the negatively charged polymer modified carbon nanotube (CNT) network. In this structure, interconnected CNTs act as the framework for the selective layer and provide numerous nanochannels for gas transport. The negatively charged polymer ensures the carrier stability and further regulates the size of nanochannels in the CNT network. By virtue of carrier-facilitated transport, high CO 2 permeance (up to 3300 gas permeation units) and high CO 2 /N 2 selectivity (400) are achieved under simulated flue gas conditions. Moreover, theoretical calculations verify that the stable separation performance is due to the strong electrostatic interaction between the amine carriers and polymer matrix. The high performance and good stability indicate the great potential of this novel membrane structure for practical application in CO 2 capture.

36 MATERIALS SCIENCE↗