Search NASA⌕ Search

SEARCH · Search NASA

Results for “Catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Supported Oxygen Evolution Catalysts by Design: Toward Lower Precious Metal Loading and Improved Conductivity in Proton Exchange Membrane Water Electrolyzers

Reducing the precious metal content of water oxidation catalysts for proton-exchange-membrane water electrolyzers remains a critical barrier to their large-scale deployment. Herein, we present an engineered architecture for supported iridium catalysts, which enables decreased precious metal content and improved activity and conductivity. The improvement in performance at lower precious metal loading is realized by the deposition of a conformal layer of platinum nanoparticles on titanium dioxide (TiO 2 ) using a facile photoreduction method to prepare conductive layer coated supports (CCSs). Platinum nanoparticles are homogeneously dispersed on TiO 2 , and the conductivity of the subsequent catalysts with 39 wt % precious group metal loadings is significantly higher than the commercial 75 wt % loaded IrO 2 -TiO 2 catalysts. The conformal conductive layer also maintains an enhanced conductivity and electrochemical activity upon thermal annealing when compared to catalysts without the conductive layer and nonconformal heterogeneous conductive layer. The iridium mass activity from half-cell studies shows a 141% improvement for CCS supported catalysts at 42% lower loadings compared to the commercial catalysts. The conductive layer also improves the single cell electrolyzer performance at a similar catalyst loading in comparison to a commercial state-of-the-art catalyst. Here, we correlate the physical properties of the engineered catalysts with their electrochemical performance in electrolyzers to understand structure-activity relationships, and we anticipate further performance improvements upon synthesis and materials optimizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

Proton exchange membrane electrolyzer cells (PEMECs) have received great attention for hydrogen/oxygen production due to their high efficiencies even at low-temperature operation. Because of the high cost of noble platinum-group metal (PGM) catalysts (Ir, Ru, Pt, etc.) that are widely used in water splitting, a PEMEC with low catalyst loadings and high catalyst utilizations is strongly desired for its wide commercialization. In this study, the ultrafast and multiscale hydrogen evolution reaction (HER) phenomena in an operating PEMEC is in-situ observed for the first time. The visualization results reveal that the HER and hydrogen bubble nucleation mainly occur on catalyst layers at the rim of the pores of the thin/tunable liquid/gas diffusion layers (TT-LGDLs). This indicates that the catalyst material of the conventional catalyst-coated membrane (CCM) that is located in the middle area of the LGDL pore is underutilized/inactive. Based on this discovery, a novel thin and tunable gas diffusion electrode (GDE) with a Pt catalyst thickness of 15 nm and a total thickness of about 25 um has been proposed and developed by taking advantage of advanced micro/nano manufacturing. The novel thin GDEs are comprehensively characterized both ex-situ and in-situ, and exhibit excellent PEMEC performance. More importantly, they achieve catalyst mass activity of up to 58 times higher than conventional CCM at 1.6 V under the operating conditions of 80 degrees C and 1 atm. This study demonstrates a promising concept for PEMEC electrode development, and provides a direction of future catalyst designs and fabrications for electrochemical devices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Influence of Sulfur on the Carbon Deposition in Liquid Hydrocarbon Steam Reforming over CeO2-Al2O3 supported Ni and Rh Catalysts

This study was performed to elucidate the influence of sulfur on the carbon deposition in steam reforming of liquid hydrocarbons over CeO{sub 2}-Al{sub 2}O{sub 3} supported Ni and Rh catalysts at 800 C. The characteristics of the carbon deposits on the used catalysts after the reactions without and with sulfur were investigated by temperature-programmed oxidation (TPO), transmission electron microscopy (TEM), scanning transmission X-ray microscopy (STXM), temperature-programmed hydrogenation (TPH), X-ray absorption near edge structure (XANES), and scanning electron microscopy (SEM). Though abundant carbon deposits can accumulate on the pure CeO{sub 2}-Al{sub 2}O{sub 3} support due to fuel thermal cracking, the addition of Ni or Rh metal greatly reduced the carbon deposition in the sulfur-free reaction. The presence of sulfur increased the carbon deposition on both catalysts, which has a much more significant impact for the Ni catalyst. Carbon XANES study on the used catalysts revealed that graphitic carbon was dominant in the presence of sulfur, while oxidized carbon species (quinone-like carbon, carboxyl and carbonate) prevailed without sulfur. Meanwhile, the formation of carboxyl and carbonate more dramatically dropped on the Ni catalyst than that on the Rh catalyst. Our results strongly suggest that (I) the presence of sulfur can suppress carbon gasification and promote the formation of graphitic carbon on reforming catalysts due mainly to its poisoning effect on metals, and (II) Rh catalyst possesses stronger capability to maintain carbon gasification activity than Ni catalyst in the presence of sulfur.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Support Effect on the Low-Temperature Hydrogenation of Benzene over PtCo Bimetallic and the Corresponding Monometallic Catalysts

PtCo bimetallic and Co, Pt monometallic catalysts supported on ?-Al2O3, SiO2, TiO2 and activated carbon (AC) were prepared and evaluated for the hydrogenation of benzene at relatively low temperatures (343 K) and atmospheric pressure. Results from flow reactor studies showed that supports strongly affected the catalytic properties of different bimetallic catalysts. AC supported PtCo bimetallic catalysts exhibited significantly better performance than the other bimetallic catalysts, and all the bimetallic catalysts possessed higher activity than the corresponding monometallic catalysts. Results from CO chemisorption and H2-temperature-programmed reduction (H2-TPR) studies suggested that different catalysts possessed different properties in chemisorption capacity and reduction behavior, and AC supported PtCo catalysts possessed significantly higher CO chemisorption capacity compared to the other catalysts. Extended X-ray absorption fine structure (EXAFS) and transmission electron microscopy (TEM) analysis provided additional information regarding the formation of Pt-Co bimetallic bonds and metallic particle size distribution in the PtCo bimetallic catalysts on different supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward efficient single-atom catalysts for renewable fuels and chemicals production from biomass and CO 2

Transformation of biomass and CO 2 into renewable value-added chemicals and fuels has been identified as a promising strategy to fulfill high energy demands, lower greenhouse gas emissions, and exploit under-utilized resources. Cost-effective and performance-efficient catalysts are of great importance to lowering the conversion cost of biomass and CO 2 . Significant progress has been made to advance the catalyst design for these processes, with metal catalysts playing a critical role in many involved catalytic reactions. Traditional nanoparticle-based metal catalysts still require improvement in metal utilization rates, stability, and selectivity tunability. Single-atom catalysts, which have maximum atomic efficiency and a uniform and tunable metal center, as well as an adjustable metal-support interaction, provide potential opportunities to boost catalyst efficiency and thermal stability. Their well-defined and uniform structure also provides advantages to fundamental studies for understanding of the intrinsic reaction mechanism and site requirement in biomass and CO 2 conversion. In this article, we summarize and highlight the recent advances in converting biomass and CO 2 to renewable fuels and chemicals using single-atom catalysts. We discuss the design principles of single-atom catalysts and their potential applications to biomass and CO 2 upgrading as well as the origins of catalytic activity. Moreover, we compare the catalytic efficiency of various catalysts reported thus to provide a fair assessment of these catalysts. Finally, perspectives are given on the interesting fields that may guide future studies.

09 BIOMASS FUELS↗

Stability of bimetallic Pd-Zn catalysts for the steam reforming of methanol

ZnO-supported palladium-based catalysts have been shown in recent years to be both active and selective towards the steam reforming of methanol, although they are still considered to be less active than traditional copper-based catalysts. The activity of PdZn catalysts can be significantly improved by supporting them on alumina. Here we show that the Pd/ZnO/Al2O3 catalysts have better long-term stability when compared with Cu/ZnO based catalysts, and that they are also stable under redox cycling. The Pd/ZnO/Al2O3 catalysts can be easily regenerated by oxidation in air at 420 ºC followed by re-exposure to reaction conditions at 250 ºC, while the Cu/ZnO based catalysts do not recover their activity after oxidation. Reduction at high temperatures (>420 ºC) leads to Zn loss from the alloy nanoparticle surface resulting in a reduced catalyst activity. However, even after such extreme treatment, the catalyst activity is regained with time on stream under reaction conditions alone, leading to highly stable catalysts. These findings illustrate that the nanoparticle surface is dynamic and changes drastically depending on the environment, and that elevated reduction temperatures are not necessary to achieve high CO2 selectivity.

10 SYNTHETIC FUELS↗

Phosphate tolerance of nitrogen-coordinated-iron-carbon (FeNC) catalysts for oxygen reduction reaction: A size-related hindrance effect

The greatest challenges facing the large – scale commercialization of the intermediate temperature phosphoric acid fuel cell (PAFC) technology are: (i) the high cost of Pt catalyst that is required to overcome the slow kinetics of oxygen reduction reaction (ORR) on the PAFC cathode, and (ii) deactivation of the Pt catalyst by exposure to the phosphoric acid electrolyte. Inexpensive carbon-based materials, particularly iron- spectroscopy is used to explore the phenomenon of phosphate poisoning nitrogen-coordinated carbon supported catalysts (FeNC), are promising cathodes for PAFCs. The higher ORR activation energy and phosphate poisoning resistance of FeNC present a clear advantage over the Pt-based commercial catalysts that are easily susceptible to deactivation after exposure to phosphate anions. While the immunity of FeNC catalysts to phosphate anion poisoning has been reported previously, this work explores the counter-intuitive and conditional nature of this poisoning resistance based on the properties of the carbon support used in the preparation of the FeNC catalyst. Additionally, a combination of electrochemical measurements with characterization experiments performed using X-ray photoelectron spectroscopy, infrared spectroscopy and in-situ X-ray absorption on FeNC catalysts synthesized from two different carbon supports. Results from these studies reveal a “size-related hindrance effect” wherein the ORR active Fe centers in FeNC remain inaccessible to larger anions such as phosphate when the Fe sites are present deeper inside the pores of a carbon support with high porosity. However, FeNC catalyst is poisoned by phosphate anions when synthesized using a carbon support with low porosity. This work helps gain insights into the nature of active sites in FeNC catalysts that will be useful in designing precious-metal free ORR catalysts for intermediate temperature fuel cell technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cobalt–iron nano catalysts supported on TiO{sub 2}–SiO{sub 2}: Characterization and catalytic performance in Fischer–Tropsch synthesis

Graphical abstract: The Co–Fe/TiO{sub 2}–SiO{sub 2} catalysts were prepared. The prepared catalysts were tested for light olefins and C{sub 5}–C{sub 12} production. The best operational conditions are 250 °C, H{sub 2}/CO = 1/1 under 5 bar pressure. - Highlights: • The TiO{sub 2}–SiO{sub 2} supported cobalt–iron catalysts were prepared via sol–gel method. • The best operational conditions were 250 °C, GHSV = 2000 h{sup −1}, H{sub 2}/CO = 1/1 and 5 bar. • The (Co/Fe)/TiO{sub 2}–SiO{sub 2} is efficient catalyst for light olefins and C{sub 5}–C{sub 12} production. - Abstract: A series of Co–Fe catalysts supported on TiO{sub 2}–SiO{sub 2} were prepared by the sol–gel method. This research investigated the effects of (Co/Fe) wt.%, the solution pH, different Co/Fe molar ratio, calcination conditions and different promoters on the catalytic performance of cobalt–iron catalysts for the Fisher–Tropsch synthesis (FTS). It was found that the catalyst containing 35 wt.% (Co–Fe)/TiO{sub 2}–SiO{sub 2} (Co/Fe molar ratio is 80/20) promoted with 1.5 wt.% Cu and calcined in air atmosphere at 600 °C for 7 h with a heating rate of 3 °C min{sup −1} is an optimal nano catalyst for converting synthesis gas to light olefins and C{sub 5}–C{sub 12} hydrocarbons. The effects of operational conditions such as the H{sub 2}/CO ratio, gas hourly space velocity (GHSV), different reaction temperature, and reaction pressure were investigated. The results showed that the best operational conditions for optimal nano catalyst are 250 °C, GHSV = 2000 h{sup −1}, H{sub 2}/CO molar ratio 1/1 under 5 bar total pressure. Catalysts and precursors were characterized by, X-ray diffraction (XRD), scanning electron microcopy (SEM), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), temperature program reduction (TPR) and N{sub 2} adsorption–desorption measurements.

36 MATERIALS SCIENCE↗

Ethylene Dimerization and Oligomerization to 1-Butene and Higher Olefins with Chromium-Promoted Cobalt on Carbon Catalyst

Industrial dimerization of ethylene to 1-butene is achieved with catalysts bearing ligand structures and activated by a co-catalyst. Here, we report that a Cr-promoted cobalt oxide on carbon catalyst was able to produce 1-butene with 53.5–82.4% total selectivity at ethylene conversions between 8.9 and 31.5% without the use of a co-catalyst. The Cr-promoted catalyst showed enhanced activity and stability compared to the nonpromoted catalyst. The characterization results revealed that the incorporation of Cr into the cobalt oxide on carbon catalyst was able to decrease the cobalt oxide particle size. Charge transfer from Cr to Co was also observed in the Cr-promoted catalyst compared to monometallic Co and Cr on carbon. The kinetic model built to rationalize the experimental observations predicted a 50% increase in active site dispersion in the Cr-promoted catalyst, which explained the 1.6× apparent reaction rate increase compared to the nonpromoted catalyst.

1-butene↗

Partial Oxidation of n-Tetradecane over 1 wt % Pt/γ-Al2O3 and Co0.4Mo0.6Cx Carbide Catalysts: A Comparative Study

Catalytic partial oxidation (CPOX) of liquid fuels is being widely studied as an option for producing a hydrogen-rich gas stream for fuel cells. However, deactivation of catalysts by carbon deposition and sulfur poisoning in this process is a key technical challenge. Here, the deactivation of Co0.4Mo0.6Cx has been compared to that of 1 wt % Pt/γ-Al2O3 in a fixed-bed catalytic reactor, using mixtures of n-tetradecane and either 1-methylnaphthalene (1-MN) or dibenzothiophene (DBT) to simulate diesel fuel. The results show that Co0.4Mo0.6Cx is stable and active for the CPOX of n-tetradecane at 850 °C, 50000 scc/(gcat h), and an O/C ratio of 1.2. This catalyst produces slightly lower H2 and CO yields than Pt/γ-Al2O3, but still close to equilibrium values for 5 h. A low concentration of sulfur (50 ppmw as DBT) has little effect on either activity or selectivity for the carbide or Pt/γ-Al2O3 catalyst. However, the presence of 1-MN or a high sulfur concentration (1000 ppmw as DBT) deactivates both catalysts, resulting in reaction products that are typical of gas-phase reactions in a blank reactor. The addition of 1-MN or 1000 ppmw DBT to n-tetradecane produces qualitatively similar results on both catalysts: H2 production decreases continuously in the presence of either 1-MN or DBT, and CO drops to a stationary level. This drop in synthesis gas yields corresponds to an increase in steam, CO2, and olefin yields, suggesting that the contaminants deactivate sites that are active for steam and dry reforming reactions downstream of the reactor inlet, where rapid oxidation takes place. Once the contaminants are removed, initial activity returns more quickly for the carbide than for Pt/γ-Al2O3.

30 DIRECT ENERGY CONVERSION↗

Catalyst Layer Resistance and Utilization in PEM Electrolysis

Improving utilization, performance, and stability of low iridium (Ir)-loaded anodes is a key goal to enable widespread adoption of polymer electrolyte membrane water electrolysis (PEMWE) for clean hydrogen production. A potential limitation is high ionic or electronic resistance of the anode catalyst layer, which leads to poor catalyst utilization, increased voltage losses, and high local overpotentials that can accelerate degradation. While catalyst layer resistance is relatively well-understood in fuel cells and other porous electrode systems, characterization of these effects is not as well established in PEMWE research. Here we present in-situ methods for measuring catalyst layer resistance in electrolysis cells using a non-faradaic H 2 /H 2 O condition as well as methods for calculating the associated voltage losses. These methods are applied to anode catalyst layers based on IrO 2 nanoparticles as well as dispersed nano-structured thin film (NSTF) Ir catalysts. Trends with anode catalyst loading and interactions between the porous transport layer and catalyst layer are investigated for IrO 2 anodes. Post-mortem microscopic analysis of durability-tested anodes is also presented, showing uneven degradation of the catalyst layer caused by catalyst layer resistance.

08 HYDROGEN↗

High-Activity Dealloyed Catalysts

Reduction of costly Pt usage in proton exchange membrane fuel cell electrodes is one of the major challenges towards development and commercialization of fuel cell vehicles. Although few have met the initial-kinetic activity requirements in a realistic fuel cell device, no catalyst material has ever met the demanding fuel cell durability targets set by DOE. In this project, a team of 4 universities and 2 companies came together to investigate a concept that appeared promising in preliminary non-fuel cell tests then to further develop the catalyst to a mature level ready for vehicle implementation. The team consists of academia with technical leadership in their respective areas, a catalyst supplier, and a fuel cell system integrator.The tightly collaborative project enabled development of a highly active and durable catalyst with performance that significantly exceeds that of previous catalysts and meets the DOE targets for the first time (Figure 1A). The catalyst was then further evaluated in full-active-area stack in a realistic vehicle operating condition (Figure 1B). This is the first public demonstration that one can realize the performance benefit and Pt cost reduction over a conventional pure Pt catalyst in a long-term realistic PEMFC system. Furthermore, systematic analyses of a range of catalysts with different performance after fuel cell testing allowed for correlation between catalyst microstructure and its electrocatalytic activity and durability. This will in turn aid future catalyst development.

30 DIRECT ENERGY CONVERSION↗

Evaluation of Promoters for Rhodium-Based Catalysts for Mixed Alcohol Synthesis

Pacific Northwest National Laboratory (PNNL) and National Renewable Energy Laboratory (NREL) are conducting research to investigate the feasibility of producing mixed alcohols from biomass-derived synthesis gas (syngas). PNNL is tasked with obtaining commercially-available catalysts or preparing promising mixed-alcohol catalysts and screening them in a laboratory-scale reactor system. Commercially-available catalysts and the most promising experimental catalysts are provided to NREL for testing using a slipstream from a pilot-scale biomass gasifier. A total of 28 tests were conducted to evaluate 22 different promoters as well as an unpromoted catalyst. The following general trends were observed for the test results: • The highest carbon selectivity to C2+ oxygenates occurred at the lowest reaction temperatures and accompanying lowest space time yields (STYs). • The lowest carbon selectivity to C2+ oxygenates occurred at the highest reaction temperatures because of high carbon conversion to hydrocarbons. • The highest C2+-oxygenate STYs occurred between 300°C and 325°C, with the gas hourly space velocity (GHSV) adjusted when necessary to maintain carbon conversion ranges between ~ 30 and 40 percent. Higher carbon selectivity to hydrocarbons at higher temperatures resulted in lower C2+-oxygenate STYs. • When catalysts were heated to between 300°C and 325°C the catalysts showed evidence of some deactivation with respect to C2+ oxygenate productivity, accompanied by reduced chain growth for the hydrocarbon products. The degree of deactivation and the temperature at which it occurred varied between the different catalysts tested. Of all of the catalysts evaluated, the Li-promoted catalysts had the highest carbon selectivity to C2+ oxygenates (47 percent) under the conditions at which the maximum C2+-oxygenate STYs were obtained.

09 BIOMASS FUELS↗

Monodisperse metal nanoparticle catalysts on silica mesoporous supports: synthesis, characterizations, and catalytic reactions

The design of high performance catalyst achieving near 100% product selectivity at maximum activity is one of the most important goals in the modern catalytic science research. To this end, the preparation of model catalysts whose catalytic performances can be predicted in a systematic and rational manner is of significant importance, which thereby allows understanding of the molecular ingredients affecting the catalytic performances. We have designed novel 3-dimensional (3D) high surface area model catalysts by the integration of colloidal metal nanoparticles and mesoporous silica supports. Monodisperse colloidal metal NPs with controllable size and shape were synthesized using dendrimers, polymers, or surfactants as the surface stabilizers. The size of Pt, and Rh nanoparticles can be varied from sub 1 nm to 15 nm, while the shape of Pt can be controlled to cube, cuboctahedron, and octahedron. The 3D model catalysts were generated by the incorporation of metal nanoparticles into the pores of mesoporous silica supports via two methods: capillary inclusion (CI) and nanoparticle encapsulation (NE). The former method relies on the sonication-induced inclusion of metal nanoparticles into the pores of mesoporous silica, whereas the latter is performed by the encapsulation of metal nanoparticles during the hydrothermal synthesis of mesoporous silica. The 3D model catalysts were comprehensively characterized by a variety of physical and chemical methods. These catalysts were found to show structure sensitivity in hydrocarbon conversion reactions. The Pt NPs supported on mesoporous SBA-15 silica (Pt/SBA-15) displayed significant particle size sensitivity in ethane hydrogenolysis over the size range of 1-7 nm. The Pt/SBA-15 catalysts also exhibited particle size dependent product selectivity in cyclohexene hydrogenation, crotonaldehyde hydrogenation, and pyrrole hydrogenation. The Rh loaded SBA-15 silica catalyst showed structure sensitivity in CO oxidation reaction. In addition, Pt-mesoporous silica core-shell structured NPs (Pt{at}mSiO{sub 2}) were prepared, where the individual Pt NP is encapsulated by the mesoporous silica layer. The Pt{at}mSiO{sub 2} catalysts showed promising catalytic activity in high temperature CO oxidation. The design of catalytic structures with tunable parameters by rational synthetic methods presents a major advance in the field of catalyst synthesis, which would lead to uncover the structure-function relationships in heterogeneous catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO/FTIR Spectroscopic Characterization of Pd/ZnO/Al2O3 Catalysts for Methanol Steam Reforming

An 8.8% Pd/ZnO/Al2O3 catalyst was either pretreated under O2 at 773 K followed by H2 at 293 K or under H2 at 773 K to obtain, respectively, a supported metallic Pd° catalyst (Pd°/ZnO/Al2O3) or a supported PdZn alloy catalyst (PdZn/ZnO/Al2O3). Both catalysts were studied by CO adsorption using FTIR spectroscopy. For the supported PdZn alloy catalyst (PdZn/ZnO/Al2O3), exposure to a mixture of methanol and steam, simulating methanol steam reforming reaction conditions, does not change the catalyst surface composition. This implies that the active sites are PdZn alloy like structures. The exposure of the catalyst to an oxidizing environment (O2 at 623 K) results in the break up of PdZn alloy, forming a readily reducible PdO with its metallic form being known as much less active and selective for methanol steam reforming. However, for the metallic Pd°/ZnO/Al2O3 catalyst, FTIR results indicate that metallic Pdº can transform to PdZn alloy under methanol steam reforming conditions. These results suggest that PdZn alloy, even after an accidental exposure to oxygen, can self repair to form the active PdZn alloy phase under methanol steam reforming conditions. Catalytic behavior of the PdZn/ZnO/Al2O3 catalyst also correlates well with the surface composition characterizations by FTIR/CO spectroscopy.

10 SYNTHETIC FUELS↗

Understanding low temperature oxidation activity of nanoarray-based monolithic catalysts: from performance observation to structural and chemical insights

Monolithic catalysts have been widely used in automotive, chemical, and energy relevant industries. Nano-array based monolithic catalysts have been developed, demonstrating high catalyst utilization efficiency and good thermal/mechanical robustness. Compared with the conventional wash-coat based monolithic catalysts, they have shown advances in precise and optimum microstructure control and feasibility in correlating materials structure with properties. Recently, the nano-array based monolithic catalysts have been studied for low temperature oxidation of automotive engine exhaust and exhibited interesting and promising catalytic activities. Here, this review focuses on discussing the key catalyst structural parameters that affect the catalytic performance from the following aspects, (1) geometric shape and crystal planes, (2) guest atom doping and defects, (3) array size and size-assisted active species loading, and (4) the synergy effect of metal oxide in composite nano-arrays. Prior to the discussion, an overview of the current status of synthesis and development of the nano-array based monolithic catalysts is introduced. The performance of these materials in low temperature simulated engine exhaust oxidation is also demonstrated. Finally, we hope this review will elucidate the science and chemistry behind the good oxidation performance of the nanoarray- based monolithic catalysts, and serve as a timely and useful research guide for rational design and further improvement of the nano-array based monolithic catalysts for automobile emission control.

36 MATERIALS SCIENCE↗

Biphasic Janus Particles Explain Self-Healing in Pt–Pd Diesel Oxidation Catalysts

The addition of Pd to Pt-based diesel oxidation catalysts is known to enhance performance and restrict the anomalous growth of Pt nanoparticles when subjected to aging at high temperatures in oxidative environments. To gain a mechanistic understanding, we studied the transport of the mobile Pt and Pd species to the vapor phase, since vapor phase transport is the primary route for sintering in these catalysts. The results are surprising: there is a 30-fold drop in the effective vapor pressure of Pt in the Pt-Pd catalysts compared to monometallic Pt. At the same time, there is a significant enhancement in the vapor pressure of Pd, compared to PdO, which otherwise has a negligible vapor pressure at the aging temperature. Such behavior cannot be explained simply by alloying Pt and Pd in the metallic phase, or a core-shell morphology where a PdO shell covers a Pt core. Transmission electron microscopic examination of catalysts aged up to 50 h in air at 800 °C shows that the particles exhibit a biphasic “Janus”-like structure. The metal and oxide phases are conjoined, exposing a metal and an oxide face to the gas phase. The high mobility of the Pt and Pd allows them to be partitioned into the metal and oxide phases, in apparent thermodynamic equilibrium. The PdO helps to trap mobile PtO2 and as a result contains high concentrations of Pt oxide, consistent with its role in mitigating the transport of Pt to the vapor phase and preventing the growth of anomalously large particles. In turn, Pt allows Pd to remain metallic, allowing the catalyst to retain both metal and oxide functionality for catalysis. The regeneration of deactivated catalysts typically requires an external input, such as a change in the working environment from reducing to oxidizing or vice-versa. Here, we show that the mobile species, which are primary contributors to catalyst sintering are effectively returned to the active site, hence our use of the term “selfhealing”. The detailed insights into the inner workings of the Pt-Pd diesel oxidation catalysts can help provide clues to the design of robust and durable heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Durability of Pt-Co Alloy Polymer Electrolyte Fuel Cell Cathode Catalysts under Accelerated Stress Tests

The durability of Pt-Co alloy cathode catalysts supported on high surface area carbon is investigated by subjecting them to accelerated stress tests (ASTs). The catalysts had different initial Co contents and nanoparticle morphologies: a “spongy” porous morphology for the high-Co (H) content catalyst, and a fully alloyed crystalline morphology for the medium-Co (M) and low-Co (L) content catalysts. The specific activity of the catalysts depends on their initial Co content, morphology and nanoparticle size, and remained higher than 1000 μA/cm 2 -Pt after 27–50% Co loss. The H-catalyst electrode showed the smallest kinetic overpotentials (η c s ) due to higher initial Pt loading than the other two electrodes, but it had the fastest increase in ηcs with AST cycling due to lower Co retention; the L-catalyst electrode showed higher η c s due to a lower initial Pt loading, but had a smaller increase in η c s with aging due to higher Co retention; the M-catalyst electrode showed a similar increase in η c s with aging, but this increase was due to the combined effects of Co dissolution and electrochemically active surface area (ECSA) loss. In conclusion, the modeled increase in mass transfer overpotentials with aging correlates with the initial Pt loading, ECSA loss and the initial catalyst morphology

25 ENERGY STORAGE↗