Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Effect of NiO spin orientation on the magnetic anisotropy of the Fe film in epitaxially grown Fe/NiO/Ag(001) and Fe/NiO/MgO(001)

Single crystalline Fe/NiO bilayers were epitaxially grown on Ag(001) and on MgO(001), and investigated by Low Energy Electron Diffraction (LEED), Magneto-Optic Kerr Effect (MOKE), and X-ray Magnetic Linear Dichroism (XMLD). We find that while the Fe film has an in-plane magnetization in both Fe/NiO/Ag(001) and Fe/NiO/MgO(001) systems, the NiO spin orientation changes from in-plane direction in Fe/NiO/Ag(001) to out-of-plane direction in Fe/NiO/MgO(001). These two different NiO spin orientations generate remarkable different effects that the NiO induced magnetic anisotropy in the Fe film is much greater in Fe/NiO/Ag(001) than in Fe/NiO/MgO(001). XMLD measurement shows that the much greater magnetic anisotropy in Fe/NiO/Ag(001) is due to a 90{sup o}-coupling between the in-plane NiO spins and the in-plane Fe spins.

36 MATERIALS SCIENCE↗

Solution-based spin-coated tin sulfide thin films for photovoltaic and supercapacitor applications

Highlights: • Tin sulfide (SnS{sub x}) thin films were prepared by solution-based spin coating. • The SnS{sub x} films annealed at 500 °C exhibited a pure SnS phase. • The films exhibited direct band gap of 1.4 eV which is near to solar maximum. • The films with the pure SnS phase exhibited a specific capacitance of 42 F g{sup ―1}. - Abstract: In this study, tin sulfide (SnS{sub x}) thin films were prepared using a solution-based spin-coating method. The annealing temperature was observed to play a dominant role in determining the phase, crystallinity, and morphology of the SnS{sub x} thin films. The results obtained from X-ray diffraction, as well as optical and electrical measurements, revealed that the films annealed at 500 °C exhibit a pure SnS phase, with a carrier concentration and direct band gap of ∼10{sup 12} and 1.4 eV, respectively. To explore the applications of SnS in supercapacitors, electrochemical measurements were performed in a 0.2 M NaOH solution. The results indicated that films with a pure SnS phase have a high specific capacitance of 42 F g{sup ―1} at a current density of 2 A g{sup ―1}. The synthesized SnS thin films demonstrate potential for applications in electrochemical capacitors and solar cells.

14 SOLAR ENERGY↗

The crystal structure, vibrational and luminescence properties of the nanocrystalline KEu(WO{sub 4}){sub 2} and KGd(WO{sub 4}){sub 2}:Eu{sup 3+} obtained by the Pechini method

The luminescent nanocrystalline KEu(WO{sub 4}){sub 2} and KGd{sub 0.98}Eu{sub 0.02}(WO{sub 4}){sub 2} have been prepared by the Pechini method. X-ray diffraction, infrared and Raman spectroscopy as well as optical spectroscopy were used to characterise the obtained materials. The crystal structure of KEu(WO{sub 4}){sub 2} was refined in I2/c space group indicating the isostructurality to KGd(WO{sub 4}){sub 2}. The size of the crystalline grains depended on the annealing temperature, increasing with the increase of the temperature. The average size of crystallites of both crystals formed at 540 deg. C was about 50 nm. Vibrational spectra showed noticeable changes as a function of size due to, among others, phonon confinement effect. Luminescence studies did not reveal significant changes for the nanocrystallites with the lowest grain size in comparison with the bulk material. The differences observed in luminescence spectra in form of slight inhomogeneous broadening of the spectral lines and increase of the hypersensitive I{sub 0-2}/I{sub 0-1} ratio point to very low symmetry of Eu{sup 3+} ions and change of the polarisation of the local vicinities of Eu{sup 3+}. X-ray diffraction, vibrational and optical studies showed that the structure of the synthesised nanocrystalline KEu(WO{sub 4}){sub 2} and KGd(WO{sub 4}){sub 2}:Eu is nearly the same as that found for the bulk material. The size-driven phase transitions were established for both compounds. - Graphical abstract: The luminescent nanocrystalline KEu(WO{sub 4}){sub 2} and KGd{sub 0.98}Eu{sub 0.02}(WO{sub 4}){sub 2} have been prepared by the Pechini method and characterise by using X-ray diffraction, infrared and Raman spectroscopy as well as optical spectroscopy. The crystal structure of KEu(WO{sub 4}){sub 2} was refined in I2/c space group indicating the isostructurality to KGd(WO{sub 4}){sub 2}. The size of the crystalline grains increases with the increase of the annealed temperature. The average size of crystallites of both crystals formed at 540 deg. C was about 50 nm. X-ray diffraction, vibrational and optical studies showed that the structure of the synthesised nanocrystalline KEu(WO{sub 4}){sub 2} and KGd(WO{sub 4}){sub 2}:Eu is nearly the same as that found for the bulk material. The size-driven phase transitions were established for both compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contrast analysis and stability on the ExAO testbed

High-contrast adaptive optics systems, such as those needed to image extrasolar planets, are known to require excellent wavefront control and diffraction suppression. The Laboratory for Adaptive Optics at UC Santa Cruz is investigating limits to high-contrast imaging in support of the Gemini Planet Imager. Previous contrast measurements were made with a simple single-opening prolate spheroid shaped pupil that produced a limited region of high-contrast, particularly when wavefront errors were corrected with the 1024-actuator Boston Micromachines MEMS deformable mirror currently in use on the testbed. A more sophisticated shaped pupil is now being used that has a much larger region of interest facilitating a better understanding of high-contrast measurements. In particular we examine the effect of heat sources in the testbed on PSF stability. We find that rms image motion scales as 0.02 {lambda}/D per watt when the heat source is near the pupil plane. As a result heat sources of greater than 5 watts should be avoided near pupil planes for GPI. The safest place to introduce heat is near a focal plane. Heat also can effect the standard deviation of the high-contrast region but in the final instrument other sources of error should be more significant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compound Meta-Optics for Complete and Loss-Less Field Control

Optical metasurfaces offer a compact platform for manipulation of the amplitude, phase, and polarization state of light. Independent control over these properties, however, is hindered by the symmetric transmission matrix associated with single-layer metasurfaces. Here, we utilize multilayer birefringent meta-optics to realize high-efficiency, independent control over the amplitude, phase, and polarization state of light. In this work, high-efficiency control is enabled by redistributing the wavefront between cascaded metasurfaces, while end-to-end inverse design is used to realize independent complex-valued functions for orthogonal polarization states. Based on this platform, we demonstrate spatial mode division multiplexing, optical mode conversion, and universal vectorial holograms, all with diffraction efficiencies over 80%. This meta-optic platform expands the design space of flat optics and could lead to advances in optical communications, quantum entanglement, and information encryption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extending geometrical optics: A Lagrangian theory for vector waves

Even when neglecting diffraction effects, the well-known equations of geometrical optics (GO) are not entirely accurate. Traditional GO treats wave rays as classical particles, which are completely described by their coordinates and momenta, but vector-wave rays have another degree of freedom, namely, their polarization. The polarization degree of freedom manifests itself as an effective (classical) “wave spin” that can be assigned to rays and can affect the wave dynamics accordingly. A well-known manifestation of polarization dynamics is mode conversion, which is the linear exchange of quanta between different wave modes and can be interpreted as a rotation of the wave spin. Another, less-known polarization effect is the polarization-driven bending of ray trajectories. Here, this work presents an extension and reformulation of GO as a first-principle Lagrangian theory, whose effective Hamiltonian governs the aforementioned polarization phenomena simultaneously. As an example, the theory is applied to describe the polarization-driven divergence of right-hand and left-hand circularly polarized electromagnetic waves in weakly magnetized plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiplex and simultaneous measurement of displacement and temperature using tapered fiber and fiber Bragg grating

A simple method to work out the multiplexing of tapered fiber based sensors is proposed and demonstrated. By cascading a tapered fiber with a fiber Bragg grating (FBG), the sensor head is provided with a wavelength identification, different FBGs provide the sensor heads with different reflective peaks and they can be distinguished in optical spectrum. By compositing several such sensor heads with a multi-channel beam splitter, a star-style topological structure sensor for multipoint sensing is achieved. At the same time, the output intensity at the peak wavelength is sensitive to one external physical parameter applied on the related FBG-cascaded tapered fiber and the central wavelength of the peak is only sensitive to temperature, so that that parameter and temperature can be measured simultaneously. A sensor for dual-point measurement of the displacement and temperature simultaneously is experimentally demonstrated by using a 2 x 2 coupler in this paper. Experiment results show that the sensor works well and the largest sensitivities reach to 0.11 dB/{mu}m for displacement in the range of 0-400 {mu}m, and {approx}0.0097 nm/ deg. C for temperature between 20 deg. C and 70 deg. C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure alterations in microporous (Mg,Fe){sub 2}Al{sub 4}Si{sub 5}O{sub 18} crystals induced by energetic heavy-ion irradiation

The microporous framework structure of (Mg{sub 1-x}Fe{sub x}){sub 2}Al{sub 4}Si{sub 5}O{sub 18} (=cordierite) has been subject to a comparative study on the effect of structural alterations originating from exposure to high-energy heavy ions. Oriented samples (with x=0.061, 0.122, and 0.170) were irradiated with swift {sup 124}Xe, {sup 197}Au and {sup 96}Ru ions with 11.1 MeV per nucleon energy and fluences of 1x10{sup 12} and 1x10{sup 13} ions/cm{sup 2}. Irradiated and non-irradiated samples were investigated by means of X-ray diffraction, Moessbauer spectroscopy and optical absorption spectroscopy. Structural investigations reveal an essentially unchanged Al,Si ordering, which appears to be unaffected by irradiation. The most remarkable macroscopic change is the ion-beam induced colouration, which could be assigned to electronic charge transfer transitions involving the Fe cations. Moessbauer spectra indicate an increased amount of {sup [4]}Fe{sup 3+} for the irradiated sample. The most noticeable structural alteration concerns irradiation-induced dehydration of extra-framework H{sub 2}O, which is accompanied by a reduction in the molar volume by {approx}0.2 vol%. - Graphical abstract: Cordierite single-crystal specimen showing the color change from pale blue (unirradiated) to a yellowish brown layer (irradiated) after exposure to relativistic {sup 124}Xe ions at a fluence of 1x10{sup 12} ions per cm{sup 2}.

36 MATERIALS SCIENCE↗

Lanthanum and neodymium solubility in simplified SiO{sub 2}-B{sub 2}O{sub 3}-Na{sub 2}O-Al{sub 2}O{sub 3}-CaO high level waste glass

Lanthanum and neodymium incorporation in simplified high level waste glasses has been investigated for SiO{sub 2}B{sub 2}O{sub 3}Na{sub 2}OAl{sub 2}O{sub 3}CaO compositions quenched from 1200 degrees C, for varying La /(La + Nd) (atomic) and increasing rare-earth oxides contents. In this system and beyond the solubility limit, rare-earths (RE) elements are reported to form apatite phases with the general formula Ca{sub 2}RE{sub 8}(SiO{sub 4}){sub 6}O{sub 2}. In the current study, speciation of these trivalent RE{sup 3+} cations in both amorphous network and crystal phases was determined from X-ray diffraction, scanning electron microscopy, optical absorption at 10 K, Raman spectroscopy, and electron probe microanalysis. It appeared that RE{sub 2}O{sub 3} solubility was higher for La -rich formulations than for Nd -rich ones and that an increase in the RE oxide content reduces the connectivity of the network building units through formation of non-bridging oxygens at the expense of the oxygen bridges. This depolymerization of the glass network did not affect neodymium environment which consisted in silicate tetrahedra. The composition of the apatite crystals was found to be affected by the La /(La + Nd) of the parent glass and deviation from the ideal composition (Ca{sub 2}RE{sub 8}(SiO{sub 4}){sub 6}O{sub 2}) occurred in the neodymium end of the system. It thus appears that both RE{sub 2}O{sub 3} solubility and crystal composition are strongly dependent on the type and crystal chemistry of the RE elements. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient modeling of Bragg coherent x-ray nanobeam diffraction

X-ray Bragg diffraction experiments that utilize tightly focused coherent beams produce complicated Bragg diffraction patterns that depend on scattering geometry, characteristics of the sample, and properties of the x-ray focusing optic. In this paper, we use a Fourier-transform-based method of modeling the 2D intensity distribution of a Bragg peak and apply it to the case of thin films illuminated with a Fresnel zone plate in three different Bragg scattering geometries. Finally, the calculations agree well with experimental coherent diffraction patterns, demonstrating that nanodiffraction patterns can be modeled at nonsymmetric Bragg conditions with this approach—a capability critical for advancing nanofocused x-ray diffraction microscopy.

36 MATERIALS SCIENCE↗

Effects of Ce additions on the age hardening response of Mg–Zn alloys

The effects of Ce additions on the precipitation hardening behaviour of Mg–Zn are examined for a series of alloys, with Ce additions at both alloying and microalloying levels. The alloys are artificially aged, and studied using hardness measurement and X-ray diffraction, as well as optical and transmission electron microscopy. It is found that the age-hardening effect is driven by the formation of fine precipitates, the number density of which is related to the Zn content of the alloy. Conversely, the Ce content is found to slightly reduce hardening. When the alloy content of Ce is high, large secondary phase particles containing both Ce and Zn are present, and remain stable during solutionizing. These particles effectively reduce the amount of Zn available as solute for precipitation, and thereby reduce hardening. Combining hardness results with thermodynamic analysis of alloy solute levels also suggests that Ce can have a negative effect on hardening when present as solutes at the onset of ageing. This effect is confirmed by designing a pre-ageing heat treatment to preferentially remove Ce solutes, which is found to restore the hardening capability of an Mg–Zn–Ce alloy to the level of the Ce-free alloy. - Highlights: • The effects of Ce additions on precipitation in Mg–Zn alloys are examined. • Additions of Ce to Mg–Zn slightly reduce the age-hardening response. • Ce-rich secondary phase particles deplete the matrix of Zn solute. • Hardening is also decreased when Ce is present in solution. • Pre-ageing to preferentially precipitate out Ce restores hardening capabilities.

36 MATERIALS SCIENCE↗

RCS of a coated circular waveguide terminated by a perfect conductor

The radar cross section (RCS) of a circular waveguide terminated by a perfect electric conductor is calculated by the geometrical theory of diffraction for the rim diffraction and by a physical optics approximation for the interior irradiation. The interior irradiation is generally more than 10 dB higher than the rim diffraction for a/lambda equal to or greater than 1 (a is the waveguide radius, lambda is the free-space wavelength). At low frequencies (a/lambda about 1), the interior irradiation can be significantly reduced over a broad range of incident angle if the interior waveguide wall is coated with a thin layer (1 percent of the radius) of lossy magnetic material. Our theoretical prediction is confirmed by measurements. At higher frequencies (a/lambda about 3), a thin layer of coating is effective for the case of near axial incidence, provided that a good transition of the TE(11) mode near the waveguide opening to the HE(11) mode inside the waveguide is made. A thicker layer of coating is required for the RCS reduction over wider incident angle.

Lee, Choon S.↗

First light of the Gemini Planet Imager

The Gemini Planet Imager is a dedicated facility for directly imaging and spectroscopically characterizing extrasolar planets. It combines a very high-order adaptive optics system, a diffraction-suppressing coronagraph, and an integral field spectrograph with low spectral resolution but high spatial resolution. Every aspect of the Gemini Planet Imager has been tuned for maximum sensitivity to faint planets near bright stars. During first-light observations, we achieved an estimated H band Strehl ratio of 0.89 and a 5-σ contrast of 10 6 at 0.75 arcseconds and 10 5 at 0.35 arcseconds. Observations of Beta Pictoris clearly detect the planet, Beta Pictoris b, in a single 60-s exposure with minimal postprocessing. Beta Pictoris b is observed at a separation of 434 ± 6 milliarcseconds (mas) and position angle 211.8 ± 0.5°. Fitting the Keplerian orbit of Beta Pic b using the new position together with previous astrometry gives a factor of 3 improvement in most parameters over previous solutions. The planet orbits at a semimajor axis of 9.0 +0.8 –0.4 AU near the 3:2 resonance with the previously known 6-AU asteroidal belt and is aligned with the inner warped disk. In conclusion, the observations give a 4% probability of a transit of the planet in late 2017.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical smoothing of laser imprinting in planar-target experiments on OMEGA EP using multi-FM 1-D smoothing by spectral dispersion

Direct-drive ignition on the National Ignition Facility (NIF) requires single-beam smoothing to minimize imprinting of laser nonuniformities that can negatively affect implosion performance. One-dimensional, multi-FM smoothing by spectral dispersion (SSD) has been proposed to provide the required smoothing [Marozas et al., Bull. Am. Phys. Soc. 55, 294 (2010)]. A prototype multi-FM SSD system has been integrated into the NIF-like beamline of the OMEGA EP Laser System. Experiments have been performed to verify the smoothing performance by measuring Rayleigh–Taylor growth rates in planar targets of laser-imprinted and preimposed surface modulations. Multi-FM 1-D SSD has been observed to reduce imprint levels by ∼50% compared to the nominal OMEGA EP SSD system. The experimental results are in agreement with 2-D DRACO simulations using realistic, time-dependent far-field spot-intensity calculations that emulate the effect of SSD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical properties and structure of beryllium lead silicate glasses

Luminescence and optical properties and structural features of (BeO){sub x}(PbO⋅SiO{sub 2}){sub 1−x} glasses (x = 0 ÷ 0.3) are investigated by means of optical absorption and photoluminescence spectroscopy and X-ray diffraction. The regularities of the formation of the optical absorption edge and static disorder are studied. It is shown that the optical absorption and luminescence are determined by transitions between localized states of lead ions. The impact of beryllium oxide on optical and luminescence properties and electronic structure of bands tails is discussed. The presence of two different concentration ranges with various short-range order structure and band tails nature has been established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Grazing incidence optics; Proceedings of the Meeting, Orlando, FL, Apr. 3, 4, 1986

Papers are presented on the diffraction-limited performance of grazing incidence optical systems; transverse ray aberrations of Wolter type 1 telescopes; hybrid X-ray telescope systems; surface characterization of grazing incidence optics in the extreme UV and X-ray regions; and the surface roughness properties of synchrotron radiation optics. Topics discussed include the simulation of free-abrasive grinding of grazing incidence mirrors with vertical-honing and flexible blades; mirrors for the Extreme Ultraviolet Explorer; the design and development of conical X-ray imaging mirrors; thermal loading considerations for synchrotron radiation mirrors; and grazing incidence optics for synchrotron radiation insertion-device beams. Consideration is given to the interpretation of glancing incidence scattering measurements; damage processes in short wavelength coated FEL optics; the replication of grain incidence optics; and the assembly and alignment of the Technology Mirror Assembly.

Osantowski, John F.↗

Manipulating Ferroelectric Topological Polar Structures with Twisted Light

Abstract The dynamic control of non‐equilibrium states represents a central challenge in condensed matter physics. While intense terahertz fields drive metal‐insulator transitions and ferroelectricity via soft phonon modes, recent theory suggests that twisted light with orbital angular momentum (OAM) offers a distinct route to manipulate ferroelectric order and stabilize topological excitations including skyrmions, vortices, and Hopfions. Control of ferroelectric polarization in quasi‐2D CsBiNb 2 O 7 (CBNO) is demonstrated using non‐resonant twisted ultra‐violet (UV) light (375 nm, 800 THz). Combining in situ X‐ray Bragg coherent diffractive imaging (BCDI), twisted optical Raman spectroscopy, and density functional theory (DFT), three‐dimensional (3D) ionic displacements, strain fields, and polarization changes are resolved in single crystals. Operando measurements reveal light‐induced strain hysteresis under twisted light–a hallmark of nonlinear, history‐dependent ferroelastic switching driven by OAM. Discrete, irreversible domain transitions emerge as the topological charge ℓ is cycled, stabilizing non‐trivial domain textures including vortex‐antivortex pairs, Bloch/anti‐Bloch points, and merons. These persist after OAM removal, indicating a memory effect. Competing mechanisms are discussed, including multiphoton absorption, strain‐mediated polarization switching, and defect‐wall interactions. The findings establish structured light as a tool for deterministic, reversible control of ferroic states, enabling optically reconfigurable non‐volatile devices.

Chemistry↗