Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Influence of ball milling and annealing conditions on the properties of L1{sub 0} FePt nanoparticles fabricated by a new green chemical synthesis method

In this work, a new green chemical strategy for the synthesis of L1{sub 0} FePt alloy nanoparticles is reported. The precursor is a polycrystalline molecular complex (Fe(H{sub 2}O){sub 6}PtCl{sub 6}), in which Fe and Pt atoms are arranged on alternating planes and milled with NaCl to form nanocrystals. Then the mixture was annealed under reducing atmosphere (5% H{sub 2} and 95% Ar) at temperatures varying from 350 °C to 500 °C for 2 h with a heating rate of 5 °C/min. After the reduction, the mixture was washed with water to remove the NaCl and L1{sub 0} FePt nanoparticles were obtained. The X-Ray Diffraction pattern showed the presence of the characteristic peaks of the fct phase of FePt nanoparticles. Influence of precursor/NaCl ratio and ball milling time on particle size was investigated. Transmission electron microscopy images revealed that smaller precursor/NaCl ratio (10 mg/20 g) and longer milling time (15 h) lead to smaller particle size and narrower size distribution. Milling time does not influence the coercivity much but the decrease of the amount of precursor leads to a decrease of coercivity from 10.8 kOe to 4.8 kOe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and electrochemical behavior of nanostructured cauliflower-shape Co-Ni/Co-Ni oxides composites

Nanostructured Co-Ni/Co-Ni oxides were electrochemically deposited onto stainless steel electrode by electrochemical method and characterized for their structural and supercapacitive properties. The SEM images indicated that the obtained Co-Ni/Co-Ni oxides had cauliflower-type nanostructure. The X-ray diffraction pattern showed the formation of Co{sub 3}O{sub 4}, NiO, Co and Ni. The EDX elemental mapping images indicated that Ni, Co and O are distributed uniformly. The deposited Co-Ni/Co-Ni oxides showed good supercapacitive characteristics with a specific capacitance of 331 F/g at 1 mA/cm{sup 2} current density in 1 M KOH electrolyte. A mechanism of the formation of cauliflower-shape Co-Ni/Co-Ni oxides was proposed. A variety of promising applications in the fields such as energy storage devices and sensors can be envisioned from Co-Ni/Co-Ni oxides.

36 MATERIALS SCIENCE↗

Structure and superparamagnetic behaviour of magnetite nanoparticles in cellulose beads

Superparamagnetic magnetite nanoparticles were obtained starting from a mixture of iron(II) and iron(III) solutions in a preset total iron concentration from 0.04 to 0.8 mol l{sup -1} with ammonia at 25 and 70 {sup o}C. The regeneration of cellulose from viscose produces micrometrical spherical cellulose beads in which synthetic magnetite were embedded. The characterization of cellulose-magnetite beads by X-ray diffraction, Scanning and Transmission Electron Microscopy and magnetic measurement is reported. X-ray diffraction patterns indicate that the higher is the total iron concentration and temperature the higher is the crystal size of the magnetite obtained. Transmission Electron Microscopy studies of cellulose-magnetite beads revealed the distribution of magnetite nanoparticles inside pores of hundred nanometers. Magnetite as well as the cellulose-magnetite composites exhibit superparamagnetic characteristics. Field cooling and zero field cooling magnetic susceptibility measurements confirm the superparamagnetic behaviour and the blocking temperature for the magnetite with a mean size of 12.5 nm, which is 200 K.

36 MATERIALS SCIENCE↗

Facile fabrication of p-BiOI/n-Zn{sub 2}SnO{sub 4} heterostructures with highly enhanced visible light photocatalytic performances

Highlights: • The BiOI/Zn{sub 2}SnO{sub 4} photocatalysts were prepared by a mild wet chemical method. • The ZB-1/2 (Zn to Bi molar ratio = 1/2) exhibits the best photocatalytic activity. • The enhanced performance results from high separation of photogenerated carriers. - Abstract: New BiOI/Zn{sub 2}SnO{sub 4} p–n heterojunction photocatalysts were prepared by anchoring n-type Zn{sub 2}SnO{sub 4} nanoparticles on p-type BiOI plates. The physicochemical characteristics of the catalysts were studied by X-ray powder diffraction pattern (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Ultraviolet visible (UV–vis) diffuse reflectance spectroscopy (DRS), nitrogen adsorption–desorption, and photoelectrochemistry measurement. The as-prepared catalysts exhibited excellent photocatalytic activity for the decomposition of methyl orange (MO) under visible light irradiation. The enhanced photocatalytic performance of BiOI/Zn{sub 2}SnO{sub 4} was not only attributed to the matched band potentials but also the interconnected heterojunction of BiOI and Zn{sub 2}SnO{sub 4} nanoparticles.

36 MATERIALS SCIENCE↗

Strain and magnetic anisotropy of as-grown and annealed Fe films on c(4x4) reconstructed GaAs (001) surface

Fe films with the different thicknesses were grown on c(4x4) reconstructed GaAs (001) surfaces at low temperature by molecular-beam epitaxy. Well-ordered bcc structural Fe epitaxial films are confirmed by x-ray diffraction patterns and high-resolution cross-sectional transmission electron microscopy images. A large lattice expansion perpendicular to the surface in Fe film is observed. In-plane uniaxial magnetic anisotropy is determined by the difference between magnetizing energy along [110] and [110] directions, and the constant of interfacial uniaxial magnetic anisotropy is calculated to be 1.02x10{sup -4} J m{sup -2}. We also find that magnetic anisotropy is not obviously influenced after in situ annealing, but in-plane strain is completely changed.

36 MATERIALS SCIENCE↗

High precision thermal stress study on flip chips by synchrotron polychromatic x-ray microdiffraction

The bending and residual stress of flip chips caused by the mismatch of thermal expansion between the chip and the substrate have been measured by polychromatic microfocused synchrotron x-ray beam. Precise orientation information as a function of position on the chip was obtained from Laue diffraction patterns, so that the bending angle with respect to a reference position at the center of the chip can be calculated at each position. This in turn allows deducing the local curvature of the entire flip chip. Local stress distribution was then mapped by applying a modified Stoney's stress-strain equation to the measured curvature. Our study shows that thermal stress on the circuits and the solder joints in a flip chip strongly depend on temperature and the distance from the center of the chip, indicating that interconnects at the corner and edge of a flip chip are of reliability concerns.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of bulk nanocrystalline Tm{sub 2}(Co{sub 1-x}Fe{sub x}){sub 17} permanent magnet

Structure and magnetic properties were studied for Tm{sub 2}(Co{sub 1-x}Fe{sub x}){sub 17} bulk nanocrystalline magnet synthesized by spark plasma sintering technique. X-ray diffraction results indicate both ingot and sintered magnet of Tm{sub 2}(Co{sub 0.7}Fe{sub 0.3}){sub 17} alloy exhibit hexagonal Th{sub 2}Ni{sub 17} type structure. The microstructure of the magnet is composed of Th{sub 2}Ni{sub 17} type nanograins with an average size of 35 nm detected by transmission electron microscopy and selected area electron diffraction patterns. Magnetic measurement shows that the remanence of the magnet is higher at 573 K than at 300 K, indicating there is a positive remanence temperature coefficient in the magnet. The anisotropy field of Tm{sub 2}(Co{sub 0.7}Fe{sub 0.3}){sub 17} alloy is 3.8 T, which is much higher than the H{sub A} of 2.3 T for the pure Tm{sub 2}Co{sub 17} alloy. The coercivity of the sintered magnet increases from 0.25 to 0.354 T after optimal annealing.

36 MATERIALS SCIENCE↗

X-ray diffraction, FTIR, UV-VIS and SEM studies on chromium (III) complexes

Five Chromium (III) complexes have been prepared using Schiff base ligands which derived from benzoin and five different amino acids (H{sub 2}N-R). Samples were characterized by XRD, FTIR, UV-VIS and SEM method. X-Ray diffraction pattern analyzed that all chromium (III) complexes have hexagonal structure and crystalline, in nature, using Bruker D8 Advance instrument. Using VERTAX 70, FTIR spectroscopy reveals that Samples have (C=N), (C-O), (M-N) and (M-O) bonds in the range of 4000-400cm{sup −1}. UV-VIS spectroscopy give information that samples absorb the visible light which is in the range of 380-780nm. For this, Lambda 960 spectrometer used. SEM is designed for studying of the solid objects, using JEOL JSM 5600 instrument.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of zinc oxide films grown on sapphire substrates using high-temperature H{sub 2}O generated by a catalytic reaction on platinum nanoparticles

The authors investigated the characteristics of ZnO films grown on a-plane (11-20) sapphire substrates at 773–873 K using a reaction between dimethylzinc and high-temperature H{sub 2}O generated by a catalytic reaction on Pt nanoparticles. The growth rate was 0.02–0.07 μm min{sup −1}. The largest electron mobility and the smallest residual carrier concentration for the ZnO films were 169 cm{sup 2} V{sup −1} s{sup −1} and 1.6 × 10{sup 17} cm{sup −3}, respectively. X-ray diffraction patterns for the ZnO films exhibited intense (0002) and (0004) peaks associated with ZnO (0001) planes. The minimum full width at half maximum of the ω-rocking curve for ZnO (0002) was less than 0.1°. In a ZnO film with a high electron mobility, no rotational domains were identified using a ZnO (10-10) ϕ scan. From secondary ion mass spectroscopy, a hydrogen concentration of 3 × 10{sup 18} cm{sup −3} and a boron concentration of 2–5 × 10{sup 17} cm{sup −3} were determined. These were identified as extrinsic donor impurities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Current Status of Single Particle Imaging with X-ray Lasers

The advent of ultrafast X-ray free-electron lasers (XFELs) opens the tantalizing possibility of the atomic-resolution imaging of reproducible objects such as viruses, nanoparticles, single molecules, clusters, and perhaps biological cells, achieving a resolution for single particle imaging better than a few tens of nanometers. Improving upon this is a significant challenge which has been the focus of a global single particle imaging (SPI) initiative launched in December 2014 at the Linac Coherent Light Source (LCLS), SLAC National Accelerator Laboratory, USA. A roadmap was outlined, and significant multi-disciplinary effort has since been devoted to work on the technical challenges of SPI such as radiation damage, beam characterization, beamline instrumentation and optics, sample preparation and delivery and algorithm development at multiple institutions involved in the SPI initiative. Currently, the SPI initiative has achieved 3D imaging of rice dwarf virus (RDV) and coliphage PR772 viruses at ~10 nm resolution by using soft X-ray FEL pulses at the Atomic Molecular and Optical (AMO) instrument of LCLS. Meanwhile, diffraction patterns with signal above noise up to the corner of the detector with a resolution of ~6 Ångström (Å) were also recorded with hard X-rays at the Coherent X-ray Imaging (CXI) instrument, also at LCLS. Achieving atomic resolution is truly a grand challenge and there is still a long way to go in light of recent developments in electron microscopy. However, the potential for studying dynamics at physiological conditions and capturing ultrafast biological, chemical and physical processes represents a tremendous potential application, attracting continued interest in pursuing further method development. In this paper, we give a brief introduction of SPI developments and look ahead to further method development.

36 MATERIALS SCIENCE↗

Improving of the electrical and magnetic properties of BiFeO{sub 3} by doping with yttrium

Bismuth ferrite is one of the most promising multiferroic materials, and the main barriers for exploiting all of its specific properties are difficulties in obtaining pure, high resistive material with nanosized grains. Doping of BiFeO{sub 3} with different transition metals and rare earth elements is often used way for overcoming these obstacles. Yttrium doped bismuth ferrite, Bi{sub 1−x}Y{sub x}FeO{sub 3} (x = 0; 0.01; 0.03; 0.05; 0.1), was prepared by auto-combustion method. X-ray diffraction patterns and Raman results showed that partial phase transition from rhombohedral to orthorhombic structure took place at around 10 mol% of Y. Effect of Y doping on microstructure was studied from SEM micrographies, showing the reduction of grain size in doped samples. Electrical measurements showed continuous improvement of resistivity with Y doping, whereas the values of saturation and remnant polarizations exhibit maximums at around 5 mol% of Y. Yttrium doping also enhanced magnetic properties, leading to weak ferromagnetism.

36 MATERIALS SCIENCE↗

Sign of the spin-polarization in cobalt-iron nitride films determined by the anisotropic magnetoresistance effect

We present the anisotropic magnetoresistance (AMR) properties in Fe{sub 4}N, Co{sub 3}FeN and Co{sub 4}N epitaxial thin films grown on SrTiO{sub 3}(001) substrates using molecular beam epitaxy. A negative AMR effect was observed in the Fe{sub 4}N and Co{sub 3}FeN films below 300 K. This behavior was attributed to the negative spin-polarizations of both the electrical conductivity and density of states at the Fermi level. The sign of the AMR ratio changed at ∼140 K in the Co{sub 4}N film and was negative below 140 K. Diffraction lines corresponding to the (100) plane were clearly observed in the ϕ-2θ{sub χ} (in-plane) x-ray diffraction patterns for the Fe{sub 4}N and Co{sub 3}FeN films but not for the Co{sub 4}N film. This indicated that nitrogen atoms were present at the body center of each unit cell in the Fe{sub 4}N and Co{sub 3}FeN films, whereas they were lacking in the Co{sub 4}N film. This assumption is discussed with energetic calculations using a spin density-functional theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local magnetic structure determination using polarized neutron holography

A unique and important property of the neutron is that it possesses magnetic moment. This property is widely used for determination of magnetic structure of crystalline samples observing the magnetic components of the diffraction peaks. Investigations of diffraction patterns give information only about the averaged structure of a crystal but for discovering of local spin arrangement around a specific (e.g., impurity) nucleus remains still a challenging problem. Neutron holography is a useful tool to investigate the local structure around a specific nucleus embedded in a crystal lattice. The method has been successfully applied experimentally in several cases using non-magnetic short range interaction of the neutron and the nucleus. A mathematical model of the hologram using interaction between magnetic moment of the atom and the neutron spin for polarized neutron holography is provided. Validity of a polarized neutron holographic experiment is demonstrated by applying the proposed method on model systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diamond formation in double-shocked epoxy to 150 GPa

We present measurements of diamond formation in doubly shocked Stycast 1266 epoxy (comprising C, H, Cl, N, and O) using in situ x-ray diffraction. Epoxy samples were reshocked against a LiF window to pressures between 80 and 148 GPa in experiments at the Omega Laser Facility. Furthermore, the pressure and temperature conditions were diagnosed in situ using velocimetry and optical pyrometry, respectively. X-ray diffraction patterns of the compressed epoxy are consistent with cubic diamond (Fd3¯m), indicating that diamond can precipitate not only from twice-shocked CH polystyrene [Kraus et al. Nat. Astron. 1, 606 (2017)] at these conditions but also from twice-shocked CH polymers with the addition of oxygen, nitrogen, and chlorine. These results, in combination with previous works on CH, CH 2 , CH 4 , and methane hydrate, support that diamond often, but not always, forms from CH-based compounds at extreme pressures and temperatures, indicating that the chemical composition, thermodynamic compression path, and kinetics play an important role.

36 MATERIALS SCIENCE↗

Temperature effect on zinc oxysulfide-Zn(O,S) films synthesized by atomic layer deposition for Cu(In,Ga)Se{sub 2} solar cells

Thin films of Zn(O,S) were deposited by atomic layer deposition from diethylzinc, water (H{sub 2}O), and hydrogen sulfide (H{sub 2}S). First, a study on the influence of the H{sub 2}S/(H{sub 2}O+H{sub 2}S) pulse ratio from pure ZnO to pure ZnS was performed at deposition temperature T{sub dep}=120 and 200 °C. Zn(O,S) films had higher S content than expected, and this effect was stronger at T{sub dep}=200 °C. Then, Zn(O,S) films have been synthesized over the range of temperature 120–220 °C at the constant H{sub 2}S/(H{sub 2}O+H{sub 2}S) pulse ratio of 9%. For T{sub dep}<180 °C, high and almost constant S content has been measured in the films. The significant increase of the S/(O+S) atomic ratio for T{sub dep}>180 °C confirmed that exchange reactions occurred between the Zn(O,S) growing films and H{sub 2}S. The grazing incidence x-ray diffraction patterns showed Zn(O,S) films with hexagonal wurtzite structures and with an optimum crystallization for temperatures T{sub dep}=160–180 °C. Indeed, in this temperature range, well crystallized and large grains were obtained which was in good correlation with the film morphology determined by scanning electron microscope; and Hall effect measurements revealed low resistivities, high carrier concentrations (>10{sup 19} cm{sup −3}), and low mobilities. From these results, the authors propose the existence of a temperature range where the properties undergo significant changes while the atomic composition remains constant.

36 MATERIALS SCIENCE↗

Surface passivation of Fe{sub 3}O{sub 4} nanoparticles with Al{sub 2}O{sub 3} via atomic layer deposition in a rotating fluidized bed reactor

Iron(II,III) oxide (Fe{sub 3}O{sub 4}) nanoparticles have shown great promise in many magnetic-related applications such as magnetic resonance imaging, hyperthermia treatment, and targeted drug delivery. Nevertheless, these nanoparticles are vulnerable to oxidation and magnetization loss under ambient conditions, and passivation is usually required for practical applications. In this work, a home-built rotating fluidized bed (RFB) atomic layer deposition (ALD) reactor was employed to form dense and uniform nanoscale Al{sub 2}O{sub 3} passivation layers on Fe{sub 3}O{sub 4} nanoparticles. The RFB reactor facilitated the precursor diffusion in the particle bed and intensified the dynamic dismantling of soft agglomerates, exposing every surface reactive site to precursor gases. With the aid of in situ mass spectroscopy, it was found that a thicker fluidization bed formed by larger amount of particles increased the residence time of precursors. The prolonged residence time allowed more thorough interactions between the particle surfaces and the precursor gas, resulting in an improvement of the precursor utilization from 78% to nearly 100%, even under a high precursor feeding rate. Uniform passivation layers around the magnetic cores were demonstrated by both transmission electron microscopy and the statistical analysis of Al mass concentrations. Individual particles were coated instead of the soft agglomerates, as was validated by the specific surface area analysis and particle size distribution. The results of thermogravimetric analysis suggested that 5 nm-thick ultrathin Al{sub 2}O{sub 3} coatings could effectively protect the Fe{sub 3}O{sub 4} nanoparticles from oxidation. The x-ray diffraction patterns also showed that the magnetic core crystallinity of such passivated nanoparticles could be well preserved under accelerated oxidation conditions. The precise thickness control via ALD maintained the saturation magnetization at 66.7 emu/g with a 5 nm-thick Al{sub 2}O{sub 3} passivation layer. This good preservation of the magnetic properties with superior oxidation resistance will be beneficial for practical magnetic-based applications.

36 MATERIALS SCIENCE↗

Preparation and Properties of FeCo Nanoparticles

Fe-Co nanoparticles were prepared from the binary Fe-Co oxalate. The formation of FeCo metallic phase begun at 290 deg. C as determined from the X-ray diffraction patterns recorded during heating of the oxalate sample in hydrogen atmosphere. The reduction finished at 500 deg. C by formation of bcc FeCo phase with a mean particle size of about 50 nm. Analysis of the Moessbauer spectra shows that the ferromagnetic FeCo phase is represented by two sextets corresponding to interiors and surfaces of the nanoparticles. In addition, a weak paramagnetic component, represented by the doublet, was observed which was ascribed to fine particles in a superparamagnetic state. TEM images have shown conglomerates of particles with the composition of about 50 at. % Fe and 50 at. % Co.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and Raman scattering study of Ni-doped CoFe{sub 2}O{sub 4}

Raman scattering measurements were made on polycrystalline CoFe{sub 2}O{sub 4} and Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} ferrites as prepared by solid-state reaction route. Rietveld refined X-ray diffraction pattern confirmed the formation of single-phase and both of the samples perfectly indexed in cubic spinel structure with Fd3m space group. Slight reduction in the lattice parameter of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} has been observed as compared to CoFe{sub 2}O{sub 4}. From Raman scattering spectra, a shoulder like feature has been observed in both of the compounds reveals that octahedral site is occupied by Co, Ni and Fe ions and tetrahedral site is occupied by only Fe ion.

36 MATERIALS SCIENCE↗