Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuse radiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

The detection of high charge cosmic ray nuclei

A large-area, light-weight electronic particle telescope was flown on a high altitude balloon in the summer of 1974 to study the heavy nuclei in the cosmic radiation. This telescope consisted of a double Cerenkov-double scintillator array composed of four 1.22 m diameter disk radiators mounted in light diffusion boxes, each looked at by multiple photomultipliers. The impact point of each particle on the scintillation radiators was determined by studying the relative signals observed by three equally spaced peripheral photomultipliers and one mounted at the center of the diffusion boxes. This telescope was flown in a configuration having a geometric factor of 0.45 sq m sr and observed some 5 x 10 to the 4 nuclei with Z exceeding 14 in a 11 hr exposure. The response and sensitivity of this telescope are discussed in detail.

Scarlett, W. R.↗

Kinetic Alfven Wave Turbulence and Transport through a Reconnection Diffusion Region

We demonstrate from observations that kinetic Alfven waves may play an important role in facilitating magnetic reconnection. These waves radiate outwards from the diffusion region oblique to the magnetic field in a conelike pattern delimited by the X line separatrices with outward energy fluxes equivalent to that contained in the outstreaming ions. It is shown that the wave vectors reverse across the X and symmetry lines and have a large out of plane component. We estimate that these waves drive significant transport through the diffusion region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical solution of fluid flow and heat tranfer problems with surface radiation

This paper presents a numerical scheme, based on the finite element method, to solve strongly coupled fluid flow and heat transfer problems. The surface radiation effect for gray, diffuse and isothermal surfaces is considered. A procedure for obtaining the view factors between the radiating surfaces is discussed. The overall solution strategy is verified by comparing the available results with those obtained using this approach. An analysis of a thermosyphon is undertaken and the effect of considering the surface radiation is clearly explained.

Ahuja, S.↗

Radiative Efficiency and Charge-Carrier Lifetimes and Diffusion Length in Polycrystalline CdSeTe Heterostructures

CdTe-based photovoltaics is a rapidly developing energy technology with one of the lowest levelized costs of electricity. But nonradiative Shockley-Read-Hall (SRH) recombination limits the efficiency of CdTe solar cells. Partial mitigation of bulk and grain-boundary SRH recombination was achieved by alloying CdTe with Se, and CdSe x Te 1-x absorbers are used in high-efficiency solar cells. Recently, interface recombination was significantly reduced with alumina passivation, but other properties of Al 2 O 3 /CdSe x Te 1-x /Al 2 O 3 heterostructures have not yet been investigated. Herein, further progress in understanding and developing polycrystalline heterostructures with x = 0.2 is reported. It is shown that external photoluminescence quantum yield is increased to 0.2%, quasi-Fermi-level splitting to 950 mV, minority carrier lifetimes to 750 ns, and mobility to 100 cm 2 Vs -1 . Such polycrystalline CdSe x Te 1-x electronic characteristics match or exceed CdTe single-crystal properties. The resulting charge-carrier diffusion length of ≈14 $\mu$m is several times greater than the absorber thickness in test structures and in typical CdTe solar cells. Herein, with passivation and absorbers, polycrystalline CdSeTe solar cell open-circuit voltage is increased from the current 76% of the Shockley-Queisser limit to 82%, or close to 1 V is reported.

14 SOLAR ENERGY↗

Mechanism of heat-modification inside a glass after irradiation with high-repetition rate femtosecond laser pulses

Accumulation of thermal energies by highly repeated irradiation of femtosecond laser pulses inside a glass induces the heat-modification whose volume is much larger than that of the photoexcited region. It has been proposed that the heat-modification occurs in the region in which the temperature had overcome a threshold temperature during exposure of laser pulses. In order to understand the mechanism of the heat-modification, we investigated the temperature distribution during laser exposure and the threshold temperature by analyzing the volume of the modification based on a thermal diffusion model. We found that the threshold temperature becomes lower with increasing laser exposure time. The dependence of the threshold temperature on the laser exposure time was explained by the deformation mechanism based on the temperature-dependent viscosity and viscoelastic behavior of a glass under a stress loading by thermal expansion. The deformation mechanism also could simulate a tear-drop shape of a heat-modification by simultaneous double-beams' irradiation and the distribution of birefringence in a heat-modification. The mechanism proposed in this study means that the temperature-dependence of the viscosity of a glass should be essential for predicting and controlling the heat-modification.

36 MATERIALS SCIENCE↗

Investigating the stability of second phase particles in Zr-Nb alloys under irradiation

The stability of the β-Nb Second Phase Particles (SPPs) in two types of Zr–Nb alloys (recrystallised Zr-1.0Nb and Zr-2.5Nb) was studied by in-situ heavy ion irradiation in a transmission electron microscope (TEM), combined with ex-situ analysis by energy dispersive x-ray spectroscopy (EDX). TEM thin foils were irradiated by 1 MeV Kr + ions at four different temperatures from 50 K to 873 K, and by 350 keV Kr + ions at different doses up to 39dpa. The change in size of individual β-Nb SPPs has been measured quantitatively, and the degradation mechanisms under irradiation at different temperatures discussed. It has been shown that the Nb redistribution between the SPPs and the Zr matrix is governed both by radiation induced mixing and local diffusion in the surrounding Zr matrix. Finally, under the radiation conditions reported in this study, the β-Nb SPPs have shown remarkably stability against irradiation, and the extent of Nb redistribution between the SPPs and Zr matrix is very limited under all experimental conditions.

36 MATERIALS SCIENCE↗

From Lévy walks to superdiffusive shock acceleration

In this paper, we present a general scenario for nondiffusive transport and we investigate the influence of anomalous, superdiffusive transport on Fermi acceleration processes at shocks. We explain why energetic particle superdiffusion can be described within the Lévy walk framework, which is based on a power-law distribution of free path lengths and on a coupling between free path length and free path duration. A self-contained derivation of the particle mean square displacement, which grows as (Δx {sup 2}) = 2D {sub α} t {sup α} with α > 1, and the particle propagator, is presented for Lévy walks, making use of a generalized version of the Montroll-Weiss equation. We also derive for the first time an explicit expression for the anomalous diffusion coefficient D {sub α} and we discuss how to obtain these quantities from energetic particle observations in space. The results are applied to the case of particle acceleration at an infinite planar shock front. Using the scaling properties of the Lévy walk propagator, the energy spectral indices are found to have values smaller than the ones predicted by the diffusive shock acceleration theory. Furthermore, when applying the results to ions with energies of a few MeV accelerated at the solar wind termination shock, the estimation of the anomalous diffusion coefficient associated with the superdiffusive motion gives acceleration times much smaller than the ones related to normal diffusion.

79 ASTRONOMY AND ASTROPHYSICS↗

A numerical assessment of cosmic-ray energy diffusion through turbulent media

How and where cosmic rays are produced, and how they diffuse through various turbulent media, represent fundamental problems in astrophysics with far-reaching implications, both in terms of our theoretical understanding of high-energy processes in the Milky Way and beyond, and the successful interpretation of space-based and ground based GeV and TeV observations. For example, recent and ongoing detections, e.g., by Fermi (in space) and HESS (in Namibia), of γ-rays produced in regions of dense molecular gas hold important clues for both processes. In this paper, we carry out a comprehensive numerical investigation of relativistic particle acceleration and transport through turbulent magnetized environments in order to derive broadly useful scaling laws for the energy diffusion coefficients.

79 ASTRONOMY AND ASTROPHYSICS↗

Celestial diffuse gamma-ray emission observed by SAS-2 and its interpretation

A clearly established diffuse celestial gamma-ray component was seen by SAS-2 above 35 MeV, after examining several regions of the sky at different latitudes, including the north celestial pole. For energies above 100 MeV the gamma ray results are consistent with an equation of the form I(b)=C1+C2/sin b with the second term being dominant, suggesting that the radiation above 100 MeV comes largely from the local regions of the galactic disk. Between 35 and 100 MeV, a similar equation is also a reasonable representation of the data, but here the two terms are comparable, with the first, or isotropic term, actually being the larger one. In addition to indicating that the diffuse radiation is partially galactic, these results imply a steepness for the energy spectrum of the diffuse isotropic component which places significant constraints on possible theoretical models of this radiation.

Fichtel, C. E.↗

Ash loading and insolation at Hanford, Washington during and after the eruption of Mount St. Helens

The effects of volcanic ash suspended in the atmosphere on the incident solar radiation was monitored at the Hanford Meteorological Station (HMS) subsequent to the major eruption of Mount St. Helens on May 18, 1980. Passage of the ash plume over Hanford resulted in a very dramatic decrease of solar radiation intensity to zero. A reduction in visibility to less than 1 km was observed, as great quantities of ash fell out of the plume onto the ground. Ash loading in the atmosphere remained very high for several days following the eruption, primarily as a result of resuspension from the surface. Visibilities remained low (2 to 8 km) during this period. Estimates of atmospheric turbidity were made from the ratio of diffuse-to-direct solar radiation; these turbidities were used to estimate extinction along a horizontal path, a quantity which can be related to visibility. Comparisons of observed and estimated visibilities were very good, in spite of the rather coarse approximations used in the estimates. Atmospheric clarity and visibility improved to near pre-eruption conditions following a period of rain showers. The diffuse-to-direct ratio of solar radiation provided a useful index for estimating volcanic ash loading of the atmosphere.

Laulainen, N. S.↗

Effect of Index of Refraction on Radiation Characteristics in a Heated Absorbing, Emitting, and Scattering Layer

The effect of the index of refraction on the temperature distribution and radiative heat flux in semitransparent materials, such as some ceramics, is investigated analytically. In the case considered here, a plane layer of a ceramic material is subjected to external radiative heating incident on each of its surfaces; the material emits, absorbs, and isotropically scatters radiation. It is shown that, for radiative equilibrium in a gray layer with diffuse interfaces, the temperature distribution and radiative heat flux for any index of refraction can be obtained in a simple manner from the results for an index of refraction of unity.

Siegel, R.↗

The reionization of the universe: The feedback of galaxy formation on the intergalactic medium

The thermal and ionization evolution of a uniform intergalactic medium (IGM) composed of H and He, undergoing reionization, including the mean effect of gas clumps embedded in a smoothly distributed ambient gas were calculated. The rate equations for ionization and recombination were solved together with the equations of energy conservation, including the effects of cosmological expansion, radiative and Compton cooling, and the diffuse flux emitted by the gas, and radiative transfer. The contribution to the continuum opacity of the universe due to the observed quasar absorption line clouds (QALC'S) were included. A variety of sources of photoionization, including quasars and primeval galaxies, as well as the possibility that hydrodynamical processes deposit thermal energy in the IGM were considered. Applications of these calculations including the evolution of the Ly-alpha forest clouds are described. A self-consistent treatment of the thermal and ionization history of the intergalactic medium (IGM) must take account of the growth of structure in the universe, since the mean density of the IGM corresponds primarily to the time-varying uncollapsed fraction of the baryon-electron component of the matter, and the collapsed fraction, in turn, can have a feedback effect on this uncollapsed fraction by releasing ionizing radiation and thermal energy and by contributing to the opacity of the universe. The coupled evolution of the IGM and the emerging structure with a special focus on the reionization of the IGM, which is believed to have been completed by some redshift z is approximately greater than 4, as inferred from the absence of the Gunn-Peterson effect in the spectra of high z quasars, are studied. The results and implications of detailed, numerical calculations of the thermal and ionization balance and radiative transfer in a uniform IGM of H and He, including the mean effect of an evolving distribution of gas clumps embedded in a smoothly distributed ambient gas is described.

Shapiro, Paul R.↗

Model of optically induced memory in amorphous azopolymers

A phenomenological model of the light - azopolymer radiation interaction is proposed in which chromophores interact with the polymer matrix due to the mutual orientational diffusion. It is established that for some amorphous azopolymers, the model satisfactorily describes the photoinduced dichroism dynamics both at the stage of light action and relaxation, and allows the estimate of the main optical parameters of chromophores (absorption cross section and quantum yields of trans and cis isomerisations, times of the spontaneous decay of cis isomers) to be obtained by the experimentally measured dichroism. The comparison of the results of model calculations with the experimental ones shows that only a part of trans isomers participating in trans - cis isomerisation contributes to the dichroism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gamma ray astronomy

A survey of the instruments developed for gamma ray astronomy is given together with a brief summary of the current status of the observational results. These include the studies of galactic gamma ray emission, the diffuse, presumably extragalactic, gamma radiation, and localized gamma ray sources. The study of the spatial distribution of galactic gamma radiation is beginning to provide a new means for the study of galactic structure and dynamics. The diffuse emission may provide evidence of gamma ray emission in the cosmological past, although improved observations must be obtained before the picture can be clarified. The study of localized sources has shown NP0532, the Crab radio pulsar, to be a gamma ray pulsar also and strong emission from Vela may be due to supernova produced cosmic rays interacting with the remnant gas.

Kniffen, D.↗

Combustion Characteristics in a Non-Premixed Cool-Flame Regime of n-Heptane in Microgravity

A series of distinct phenomena have recently been observed in single-fuel-droplet combustion tests performed on the International Space Station (ISS). This study attempts to simulate the observed flame behavior numerically using a gaseous n-heptane fuel source in zero gravity and a time-dependent axisymmetric (2D) code, which includes a detailed reaction mechanism (127 species and 1130 reactions), diffusive transport, and a radiation model (for CH4, CO, CO2, H2O, and soot). The calculated combustion characteristics depend strongly on the air velocity around the fuel source. In a near-quiescent air environment (< or = 2 mm/s), with a sufficiently large fuel injection velocity (1 cm/s), a growing spherical diffusion flame extinguishes at ≈1200 K due to radiative heat losses. This is typically followed by a transition to the low-temperature (cool-flame) regime with a reaction zone (at ≈700 K) in close proximity to the fuel source. The 'cool flame' regime is formed due to the negative temperature coefficient in the low-temperature chemistry. After a relatively long period (≈18 s) of the cool flame regime, a flash re-ignition occurs, associated with flame-edge propagation and subsequent extinction of the re-ignited flame. In a low-speed (≈3 mm/s) airstream (which simulates the slight droplet movement), the diffusion flame is enhanced upstream and experiences a local extinction downstream at ≈1200 K, followed by steady flame pulsations (≈0.4 Hz). At higher air velocities (4-10 mm/s), the locally extinguished flame becomes steady state. The present axisymmetric computational approach helps in revealing the non-premixed 'cool flame' structure and 2D flame-flow interactions observed in recent microgravity droplet combustion experiments.

diffusion flame↗

Specific features of defect and mass transport in concentrated fcc alloys

We report that diffusion and mass transport are basic properties that control materials performance, such as phase stability, solute decomposition and radiation tolerance. While understanding diffusion in dilute alloys is a mature field, concentrated alloys are much less studied. Here, atomic-scale diffusion and mass transport via vacancies and interstitial atoms are compared in fcc Ni, Fe and equiatomic Ni-Fe alloy. High temperature properties were determined using conventional molecular dynamics on the microsecond timescale, whereas the kinetic activation-relaxation (k-ART) approach was applied at low temperatures. The k-ART was also used to calculate transition states in the alloy and defect transport coefficients. The calculations reveal several specific features. For example, vacancy and interstitial defects migrate via different alloy components, diffusion is more sluggish in the alloy and, notably, mass transport in the concentrated alloy cannot be predicted on the basis of diffusion in its pure metal counterparts. Lastly, the percolation threshold for the defect diffusion in the alloy is discussed and it is suggested that this phenomenon depends on the properties and diffusion mechanisms of specific defects.

36 MATERIALS SCIENCE↗