Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Nanostructural engineering of nitride nucleation layers for GaN substrate dislocation reduction.

With no lattice matched substrate available, sapphire continues as the substrate of choice for GaN growth, because of its reasonable cost and the extensive prior experience using it as a substrate for GaN. Surprisingly, the high dislocation density does not appear to limit UV and blue LED light intensity. However, dislocations may limit green LED light intensity and LED lifetime, especially as LEDs are pushed to higher current density for high end solid state lighting sources. To improve the performance for these higher current density LEDs, simple growth-enabled reductions in dislocation density would be highly prized. GaN nucleation layers (NLs) are not commonly thought of as an application of nano-structural engineering; yet, these layers evolve during the growth process to produce self-assembled, nanometer-scale structures. Continued growth on these nuclei ultimately leads to a fully coalesced film, and we show in this research program that their initial density is correlated to the GaN dislocation density. In this 18 month program, we developed MOCVD growth methods to reduce GaN dislocation densities on sapphire from 5 x 10{sup 8} cm{sup -2} using our standard delay recovery growth technique to 1 x 10{sup 8} cm{sup -2} using an ultra-low nucleation density technique. For this research, we firmly established a correlation between the GaN nucleation thickness, the resulting nucleation density after annealing, and dislocation density of full GaN films grown on these nucleation layers. We developed methods to reduce the nuclei density while still maintaining the ability to fully coalesce the GaN films. Ways were sought to improve the GaN nuclei orientation by improving the sapphire surface smoothness by annealing prior to the NL growth. Methods to eliminate the formation of additional nuclei once the majority of GaN nuclei were developed using a silicon nitride treatment prior to the deposition of the nucleation layer. Nucleation layer thickness was determined using optical reflectance and the nucleation density was determined using atomic force microscopy (AFM) and Nomarski microscopy. Dislocation density was measured using X-ray diffraction and AFM after coating the surface with silicon nitride to delineate all dislocation types. The program milestone of producing GaN films with dislocation densities of 1 x 10{sup 8} cm{sup -2} was met by silicon nitride treatment of annealed sapphire followed by the multiple deposition of a low density of GaN nuclei followed by high temperature GaN growth. Details of this growth process and the underlying science are presented in this final report along with problems encountered in this research and recommendations for future work.

36 MATERIALS SCIENCE↗

Nonlinear ultrasonic assessment of stress corrosion cracking damage in sensitized 304 stainless steel

This research uses nonlinear Rayleigh surface waves to characterize stress corrosion cracking (SCC) damage in welded 304 Stainless Steel (304 SS). 304 SS is widely used in reactor pressure vessels, where a corrosive environment in combination with applied stress due to high internal pressures can cause SCC. Welds and the nearby heat affected zones (HAZ) in the vessel material are especially sensitive to SCC damage. SCC damage results in microstructural changes such as dislocation formation and microcrack initiation that in the long term lead to reduced structural integrity and material failure. Therefore, the early detection of SCC is crucial to ensure safe operation. It has been shown that the microstructural changes caused by SCC can generate higher harmonic waves when excited harmonically. This research considers different levels of SCC damage induced in samples of welded 304 SS by applying stress to a specimen held in a corrosive medium (Sodium Thiosulfate). A nonlinear Rayleigh surface wave is introduced in the material and the fundamental and the second harmonic waves are measured using wedge detection. The nonlinearity parameter that relates the fundamental and the second harmonic amplitudes, is computed to quantify the SCC damage in each sample. These results are used to demonstrate the feasibility of using nonlinear Rayleigh waves to characterize SCC damage.

42 ENGINEERING↗

Irradiation creep model for α-Fe: Dislocation climb in the presence of stress fields (Final Report)

Irradiation creep is known to be an important process for structural materials in nuclear environments, potentially leading to creep failure at temperatures where thermal creep is generally negligible. While there is a great deal of data for irradiation creep in steels and zirconium alloys in light water reactor conditions, much less is known for first wall materials under fusion energy conditions. Lacking suitable fusion neutron sources for detailed experimentation, modeling, and simulation can help bridge the dose-rate and spectral-effects gap and produce quantifiable expectations for creep deformation of first wall materials under standard fusion conditions. In this work, we present a comprehensive model for irradiation creep created from merging a crystal plasticity representation of the dislocation microstructure and a defect evolution simulator that accounts for the entire cluster dimensionality space. Both approaches are linked by way of a climb velocity that captures dislocation-biased defect absorption and a dislocation strengthening term that reflects the accumulation of defect clusters in the system. We carry out our study in Fe under first wall fusion reactor conditions, characterized by a fusion neutron spectrum at temperatures between 300 and 800°K.

36 MATERIALS SCIENCE↗

Electron Scattering in InSb Quantum Wells due to Micro-twin Defects

The transport electron scattering due to micro-twin (MT) defects in InSb quantum wells (QWs) has been investigated at room temperature (RT). A linear-regression-based scattering analysis showed that Matthiessen's rule is applicable to the RT electron mobility in 20-nm-thick InSb QWs that contain MTs (whose density is 5.6x10{sup 2}-1.2x10{sup 4} /cm) and threading dislocations (8.7x10{sup 8}-3.2x10{sup 9} /cm{sup 2}) as dominant structural defects. For such an InSb QW whose local electron mobility in its non-MT regions is 2.8x10{sup 4}-4.5x10{sup 4} cm{sup 2}/(Vs), the MT-originated energy barrier against the electron transport is deduced to be 0.081-0.093 eV at RT.

36 MATERIALS SCIENCE↗

High Quality, Low Cost Ammonothermal Bulk GaN Substrates

Ammonothermal GaN growth using a novel apparatus has been performed on c-plane, m-plane, and semipolar seed crystals with diameters between 5 mm and 2 in. to thicknesses of 0.5-3 mm. The highest growth rates are greater than 40 mu m/h and rates in the 10-30 mu m/h range are routinely observed for all orientations. These values are 5-100x larger than those achieved by conventional ammonothermal GaN growth. The crystals have been characterized by X-ray diffraction rocking-curve (XRC) analysis, optical and scanning electron microscopy (SEM), cathodoluminescence (CL), optical spectroscopy, and capacitance-voltage measurements. The crystallinity of the grown crystals is similar to or better than that of the seed crystals, with FWHM values of about 20-100 arcsec and dislocation densities of 1 x 10(5)-5 x 10(6) cm(-2). Dislocation densities below 10(4) cm(-2) are observed in laterally-grown crystals. Epitaxial InGaN quantum well structures have been successfully grown on ammonothermal wafers. (C) 2013 The Japan Society of Applied Physics

Ehrentraut, D↗

Nanoengineered Hypereutectoid Steel with Superior Hardness and Wear Resistance

Hypereutectoid SAE 52100 steel is extensively used in bearing applications. Microstructure modification in terms of dislocation martensite and carbide refinement was achieved for SAE 52100 steel through a simple duplex heat treatment. Refinement of prior austenite grains to less than 5 μm resulted in the conversion of conventional high-carbon twinned martensite to dislocation martensite. The concurrent refinement of austenite grains and carbide precipitates was accomplished by high-temperature austenitization followed by low-temperature tempering. This resulted in nanoscale nonstoichiometric ε-carbides within a heavily twinned martensitic structure. These nanoscale carbides acted as grain boundary pinning agents after their transformation to θ-carbides during the final austenitization process. The resulting microstructure was characterized by a fine dispersion of θ-carbides within dislocation martensite and showed roughly 24% increase in tensile strength and 30% better wear resistance compared to conventional structure.

36 MATERIALS SCIENCE↗

Study of the structural and optical properties of GaP(N) layers synthesized by molecular-beam epitaxy on Si(100) 4° substrates

The structural and optical properties of GaP and GaPN layers synthesized by molecular-beam epitaxy on Si(100) substrates misoriented by 4° are studied. The possibility of producing GaP buffer layers that exhibit a high degree of heterointerface planarity and an outcropping dislocation density of no higher than ~2 × 10{sup 8} cm{sup –2} is shown. Emission from the Si/GaP/GaPN structure in the spectral range of 630–640 nm at room temperature is observed. Annealing during growth of the Si/GaP/GaPN structure makes it possible to enhance the room-temperature photoluminescence intensity by a factor of 2.6, with no shift of the maximum of the emission line.

36 MATERIALS SCIENCE↗

Linking the Codependence of Grain Boundary Structure and Density to Defect Evolution Mechanisms during Radiation Damage

There is little understanding of the direct link between grain boundary character and density, and defect denuded zones. For example, the role of reduced grain size to the nanocrystalline regime and subsequent increase in grain boundary density is not fully understood in the context of dislocation or void behavior near grain boundaries. In addition, little is understood experimentally on how defect absorption changes the structure of the grain boundary during irradiation and may play a role in the migration of defects and solutes. This work aims to define a framework for understanding the origin of radiation damage mechanisms in model BCC and FCC nanocrystalline materials, on which a foundation of radiation tolerant material development can be built. The key questions that will be addressed by this work are: 1. What is the influence of GB density and GB character (GBC) on radiation damage accumulation near grain boundaries in model nanocrystalline FCC and BCC alloys; how are these two effects connected? 2. In the context of radiation induced segregation (RIS), what effect does species dependent interstitial diffusion have on the GB chemistry in light of these two dependencies? 3. How does grain boundary sink efficiency evolve with radiation over time? In situ and analytical transmission electron microscopy techniques are used to study both pure and alloy nanocrystalline materials under irradiation. TEM samples prepared from thin films will be irradiated in-situ, allowing for dynamic observation of the behavior of the alloy under ion irradiation. The key findings from this program were (1) the control of thin film texture via sputtering; (2) the development of characterization tools for defects and grain boundary quantification; (3) the development of new techniques for defect characterization toward high throughput analysis; (4) a mapped out parameter space for defect evolution as a function of grain size and grain boundary character; and finally (5) an indication of sink efficiency and its stability during irradiation.

36 MATERIALS SCIENCE↗

Structure and Properties of the Fe/Y2O3 Interface from First Principles Calculations

Fundamentals of radiation damage are: (1) Formation of Frenkel pair (interstitial-vacancy pair) defects in the lattice; (2) Concentration of Frenkel pair defects >>> thermal equilibrium thermodynamic concentration; and (3) The radiation damage response of a material is determined by the fate of these excess Frenkel pair defects in the lattice. The objective is to understand the electronic and atomic structure of Fe/Y{sub 2}O{sub 3} interface and segregation behavior of the alloying elements at the interface. The significance of the results of this report are: (1) Provides a science based approach to design new radiation resistant materials. Obtained two controlling parameters - Dislocation density (composition, orientation relationship) and Oxygen partial pressure; (2) Applicable to any other metal/oxide interfaces (both functional and structural properties at the interface) - (a) Nano Catalysts: Oxide-supported metal catalysts Ni/ZrO{sub 2}, (b) Thermal barrier coatings (Ni/Al{sub 2}O{sub 3}), (c) Corrosion of metals and alloys.

36 MATERIALS SCIENCE↗

Strain and stability of ultrathin Ge layers in Si/Ge/Si axial heterojunction nanowires

The abrupt heterointerfaces in the Si/Ge materials system presents useful possibilities for electronic device engineering because the band structure can be affected by strain induced by the lattice mismatch. In planar layers, heterointerfaces with abrupt composition changes are difficult to realize without introducing misfit dislocations. However, in catalytically grown nanowires, abrupt heterointerfaces can be fabricated by appropriate choice of the catalyst. Here we grow nanowires containing Si/Ge and Si/Ge/Si structures respectively with sub-1nm thick Ge "quantum wells" and we measure the interfacial strain fields using geometric phase analysis. Narrow Ge layers show radial strains of several percent, with a corresponding dilation in the axial direction. Si/Ge interfaces show lattice rotation and curvature of the lattice planes. We conclude that high strains can be achieved, compared to what is possible in planar layers. In addition, we study the stability of these heterostructures under heating and electron beam irradiation. The strain and composition gradients are supposed to the cause of the instability for interdiffusion.

36 MATERIALS SCIENCE↗

A study of the structure and scattering mechanisms of subterahertz phonons in lithium fluoride single crystals and optical ceramics

The methods of optical, electron, and atomic force microscopy (AFM) are applied to the study of the real structure of optical lithium fluoride ceramic obtained by hot deformation of single crystals. A comparative analysis is carried out of the scattering mechanisms of weakly nonequilibrium thermal phonons at liquid helium temperatures in LiF single crystals and ceramics. It is demonstrated that the phonon scattering in the original single crystals is determined by the forced vibrations of dislocations in the stress field of an elastic plane wave (a phonon), i.e., by the flutter mechanism. As the degree of deformation of the original material increases, the ceramics exhibit a change in the plastic deformation mechanisms, which leads to a decrease in the average size of grains and to an ordered structure. In this case, the dominant scattering is that by intergrain boundaries. The thickness and the acoustic impedance of these boundaries are evaluated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The potential for ductility enhancement from surface and interface dislocation sources in NiAl

Limited ductility and toughness of NiAl and related aluminides near room temperature pose major problems in their potential application as structural materials. An analysis of these problems is presented as part of a review of the flow and fracture behavior of binary NiAl. Following this discussion is a demonstration that conditions of elastic and plastic constraint associated with phase boundaries afforded by surface films, internal lamellae, or precipitates may introduce sufficient densities of mobile dislocations to enhance the ductility of NiAl-based materials by significant amounts. Examples of this behavior are presented for several model materials, including 001- and 123-oriented single crystals of oxide-coated NiAl, directionally solidified beta-gamma-prime (Ni70Al30) and beta-gamma (Ni50Fe30Al20) in situ composites, and several NiAl/precipitate systems. The nature of the resulting dislocation substructures and the effects of several materials variables are described.

Noebe, R. D.↗

Microstructural Characterization of Deformation Localization at Small Strains in a Neutron Irradiated 304 Stainless Steel

Deformation localization and structure evolution were investigated in an AISI 304 austenitic stainless steel deformed to 0.8% strain. Using SEM-EBSD, it was shown local plastic deformation may reach significant levels even when the bulk averaged strain level remains below 1%. Local misorientation values up to 24 were observed in these regions of high local plastic deformation. EBSD analysis of FIB lift-out specimens demonstrated that local misorientation level was highest near the free surface and diminished with increasing depth. (S)TEM observations on the same specimen indicated the local density of dislocation channels may vary up to an order of magnitude depending on local grain configuration, distance to the surface and/or local grain boundary structure. It was found that in the case of RT deformation, dislocation defect-free channels may contain twin or may be twin-free with twinning occurring inside channels. Formation of BCC-phase colonies (martensite) was observed in near-surface layer whereas no transformation in the volume of the specimen was detected at this strain level. Martensite formation was associated with channel-grain boundary intersection points where high local misorientation was observed using EBSD.

Deformation↗

Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy

Here, a CrCoNi based medium entropy alloy with small additions of Ti, Al and Nb (denoted as (CrCoNi) 93 Al 4 Ti 2 Nb) in the as-quenched condition, exhibits tensile properties comparable to those of the equiatomic CrCoNi alloy at room temperature. Dark field transmission electron microscopy (TEM), atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) together with atom probe tomography (APT) show that spatially-localized long range ordering (LRO) L1 2 domains exist in this alloy. The evolution of deformation substructure with plastic deformation in this alloy was characterized using electron backscatter diffraction (EBSD), electron channeling contrast imaging (ECCI) and STEM based techniques including the recently developed weak beam dark field STEM imaging. Plastic deformation occurs by the slip of a/2<110>dislocations, which are narrowly dissociated into Shockley partial dislocations on {111} slip planes. Their dissociation distances in the (CrCoNi) 93 Al 4 Ti 2 Nb alloy are much smaller than the widths of the corresponding partials in the equiatomic CrCoNi alloy due to one or more of the minor alloying elements (Al, Ti, Nb). Dislocation slip in this alloy has a pronounced planar character. The leading dislocations in slip bands glide as pairs due to the existence of LRO domains. Multipoles were formed through the slip of dislocations with opposite signs on adjacent {111} slip planes. Those multipoles serve as building blocks for the formation of subgrain structures consisting of fine slip bands. The distances between slip bands were continuously refined during plastic deformation and dynamic refinement of slip bands plays a crucial role in strain hardening. The effects of LRO domains on planar dislocation slip, the deactivation of deformation twinning and strain hardening of this alloy are discussed.

36 MATERIALS SCIENCE↗

Blunting of a brittle crack at grain boundaries: An atomistic study in BCC Iron

In this study, we investigated the interaction of a brittle crack with low and high angle grain boundaries in BCC Iron by means of atomistic simulations at finite temperatures. It is demonstrated that both low and high angle grain boundaries exhibit resistance to brittle crack propagation. The resistance is controlled by the ability of a grain boundary interface to structurally transform, which can involve grain boundary sliding or the emission of misfit dislocations. Here, we observed deformation mechanisms which generally correspond to those reported in experiments for Fe–Si polycrystals. We show that low and high angle grain boundaries exhibit different intensities of plastic deformation upon interaction with a brittle crack, thereby offering different resistance to its propagation.

crack↗

Defective Interfaces in Yttrium-Doped Barium Zirconate Films and Consequences on Proton Conduction

Yttrium-doped barium zirconate (BZY) thin films have recently showed surprising electric transport properties. Experimental investigations conducted mainly by electrochemical impedance spectroscopy suggested that a consistent part of this BZY conductivity is of protonic nature. These results have stimulated further investigations by local unconventional techniques. Here, we use electrochemical strain microscopy (ESM) to detect electrochemical activity in BZY films with nanoscale resolution. ESM in a novel cross-sectional measuring setup allows the direct visualization of the interfacial activity. The local electrochemical investigation is compared with the structural studies performed by state of art scanning transmission electron microscopy (STEM). The ESM and STEM results show a clear correlation between the conductivity and the interface structural defects. In conclusion, we propose a physical model based on a misfit dislocation network that introduces a novel 2D transport phenomenon, whose fingerprint is the low activation energy measured.

36 MATERIALS SCIENCE↗

Perfect Strain Relaxation in Metamorphic Epitaxial Aluminum on Silicon through Primary and Secondary Interface Misfit Dislocation Arrays

Understanding the atomically precise arrangement of atoms at epitaxial interfaces is important for emerging technologies such as quantum materials that have function and performance dictated by bonds and defects that are energetically active on the micro-electronvolt scale. A combination of atomistic modeling and dislocation theory analysis describes both primary and secondary dislocation networks at the metamorphic Al/Si (111) interface, which is experimentally validated by atomic resolution scanning transmission electron microscopy. The electron microscopy images show primary misfit dislocations for the majority of the strain relief and evidence of a secondary structure allowing for complete relaxation of the Al–Si misfit strain. Finally, this study demonstrates the equilibrium interface that represents the lowest energy structure of a highly mismatched and semicoherent single-crystal interface with complete strain relief in an atomically abrupt structure.

36 MATERIALS SCIENCE↗

Nondestructive Measurement of Residual Strain in Connecting Rods Using Neutrons

Increasing the strength of materials is effective in reducing weight and boosting structural part performance, but there are cases where the residual strain generated during the process of manufacturing of high-strength materials results in a decline of durability. It is therefore important to understand how the residual strain in a manufactured component changes due to processing conditions. In the case of a connecting rod, because the strain load on the connecting rod rib sections is high, it is necessary to clearly understand the distribution of strain in the ribs. However, because residual strain is generally measured by using X-ray diffractometers or strain gauges, measurements are limited to the surface layer of the parts. Neutron beams, however, have a higher penetration depth than X-rays, allowing for strain measurement in the bulk material. The research discussed within this article consists of nondestructive residual strain measurements in the interior of connecting rods using the Second Generation Neutron Residual Stress Mapping Facility (NRSF2) at Oak Ridge National Laboratory (ORNL), measuring the Fe (211) diffraction peak position of the ferrite phase. The interior strain distribution of the connecting rod, which was prepared under different manufacturing processes, was revealed. By the visualization of interior strains, clear understandings of differences in various processing conditions were obtained. In addition, it is known that the peak width, which is also obtained during measurement, is suggestive of the size of crystallites in the structure; however, the peak width can additionally be caused by microstresses and material dislocations.

36 MATERIALS SCIENCE↗