Search NASA⌕ Search

SEARCH · Search NASA

Results for “Equilibrium diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Quantifying Membrane Structure and Dynamics during Bioproduct Production in Zymomonas mobilis by Molecular Simulation

The conversion of lignocellulosic biomass into biofuels and bioproducts by microbial biorefineries is central to a sustainable chemical industry. Zymomonas mobilis is one such biorefinery chassis and is resistant to ethanol stress, leading to its use in biomass conversion to biofuels and bioproducts. However, Z. mobilis growth is often inhibited by organic acids, aldehydes, alcohols, ketones, and amides found in biomass hydrolysate. The resulting slow growth inhibits production and as a result drives up the price for the resulting products. One hypothesis is that these molecules interact with or disrupt the bacterial membrane, triggering stress responses and hindering growth. To test this hypothesis at the molecular level, we employ all-atom molecular dynamics (MD) simulations to investigate lignocellulose-derived small molecules and their impact on a biologically relevant Z. mobilis membrane model. Simulations were conducted across a range of inhibitor concentrations from 0 to 2.5 mol %, analyzing key membrane properties such as area per lipid (APL), membrane thickness, lipid-order parameter (−S CH ), lateral diffusion coefficient (D xy ), and permeability coefficient (Pm). From simulation, we observed altered membrane structure and dynamics at these modest small molecule concentrations commonly found in hydrolysates. Generally, the membranes become thinner, with a higher area per lipid and lower-order parameter as the small molecule concentration increases. These trends are stronger for more hydrophobic molecules with greater hydrophobic bulk, as isobutanol, propanol, and propanoic acid showed greater membrane perturbations as the concentration increased compared to other small molecules. Tracking small molecule distributions directly in our equilibrium simulations allows us to determine concentration-dependent free energy profiles for these molecules. While the trends are noisy, generally the barriers to crossing the membrane decrease as the concentration increases, indicating that the membranes become leakier as small molecule concentrations rise. Comparing between native Z. mobilis membranes with hopanoids and membranes sharing the same phospholipid composition but without hopanoids, hopanoids stabilize and order the membrane for smaller molecules to maintain membrane structure but appear insufficient for larger hydrophobic molecules like isobutanol. These findings provide a mechanistic understanding of how small molecules found in biomass degradation streams interact with the Z. mobilis membrane, offering valuable insights for future strain engineering efforts to optimize biofuel and bioproduct synthesis from biomass feedstocks by highlighting limits to small molecule tolerance. This knowledge can guide the modification of membrane composition to develop more robust microbes, thereby improving microbial survival and yields in industrial contexts.

Singh, Nitin Kumar [Michigan State Univ., East Lan↗

Anomalous Shape Evolution of Ag 2 O 2 Nanocrystals Modulated by Surface Adsorbates during Electron Beam Etching

An understanding of nanocrystal shape evolution is significant for the design, synthesis, and applications of nanocrystals with surface-enhanced properties such as catalysis or plasmonics. Surface adsorbates that are selectively attached to certain facets may strongly affect the atomic pathways of nanocrystal shape development. However, it is a great challenge to directly observe such dynamic processes in situ with a high spatial resolution. In this work, we report the anomalous shape evolution of Ag 2 O 2 nanocrystals modulated by the surface adsorbates of Ag clusters during electron beam etching, which is revealed through in situ transmission electron microscopy (TEM). In contrast to the Ag 2 O 2 nanocrystals without adsorbates, which display the near-equilibrium shape throughout the etching process, Ag 2 O 2 nanocrystals with Ag surface adsorbates show distinct facet development during etching by electron beam irradiation. Three stages of shape changes are observed: a sphere-to-a cube transformation, side etching of a cuboid, and bottom etching underneath the surface adsorbates. We find that the Ag adsorbates modify the Ag 2 O 2 nanocrystal surface configuration by selectively capping the junction between two neighboring facets. They prevent the edge atoms from being etched away and block the diffusion path of surface atoms. Finally, our findings provide critical insights into the modulatory function of surface adsorbates on the shape control of nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

ISOTHERMAL DISTRIBUTIONS IN MONDian GRAVITY AS A SIMPLE UNIFYING EXPLANATION FOR THE UBIQUITOUS{rho}{proportional_to}r {sup -3} DENSITY PROFILES IN TENUOUS STELLAR HALOS

That the stellar halo of the Milky Way has a density profile which, to first approximation, satisfies{rho}{proportional_to}r {sup -3} and has been known for a long time. More recently, it has become clear that M31 also has such an extended stellar halo, which approximately follows the same radial scaling. Studies of distant galaxies have revealed the same phenomenology. Also, we now know that the density profiles of the globular cluster systems of our Galaxy and Andromeda to first approximation follow{rho}{proportional_to}r {sup -3},{Sigma}{proportional_to}R {sup -2} in projection. Recently, diffuse populations of stars have been detected spherically surrounding a number of Galactic globular clusters, extending much beyond the Newtonian tidal radii, often without showing any evidence of tidal features. Within the standard Newtonian and general relativity scenario, numerous and diverse particular explanations have been suggested, individually tailored to each of the different classes of systems described above. Here we show that in a MONDian gravity scenario any isothermal tenuous halo of tracer particles forming a small perturbation surrounding a spherically symmetric mass distribution will have an equilibrium configuration which to first approximation satisfies a{rho}{proportional_to}r {sup -3} scaling.

79 ASTRONOMY AND ASTROPHYSICS↗

Vidyut3d: A Gpu Accelerated Fluid Solver for Non-Equilibrium Plasmas on Adaptive Grids

We present the numerical methods, programming methodology, verification, and performance assessment of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures, in this work. Our plasma fluid model solves the coupled conservation equations for species transport, electrostatic Poisson and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive-grid/particle management library, AMReX, and is portable over widely available vendor specific GPU architectures. We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth-order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on capacitive discharges and atmospheric pressure streamer propagation. We demonstrate the use of our solver on two 3D simulation cases: an atmospheric streamer propagation in Ar-H2 mixtures and a low pressure twin electrode radio frequency reactor. Our performance studies on three different CPU+GPU architectures indicate approximately 150-400X speed-up using AMD and NVIDIA GPUs per time step compared to a single CPU core for a 4 million cell simulation with 15 species.

Sitaraman, Hariswaran↗

Decarburization and Carburization Behavior of Grade 91 Steel in Sodium Environments

Two heats of G91 steel have been investigated in sodium at 550-650°C to understand its corrosion behaviour, microstructural evolution, and tensile properties. Sodium exposure tests of subsized tensile and coupon specimens of G91 base metal and weldment were conducted in Argonne’s forced convection sodium materials testing loops. Maximum exposure times of ~39,000 h at 550°C, ~37,000 h at 600°C, and ~20,000 h at 650°C have been achieved, respectively. Thermal aging experiments of G91 steel were conducted in parallel, and the data of the sodium-exposed specimens were compared with the thermal aging data of the same heat to isolate the thermal aging effect from the effect of sodium exposure. It was found that the tensile strength of G91 steel can be reduced by more than 50% after sodium exposures at 650°C. The effect of a sodium environment on tensile properties is largely dependent on the carburization/decarburization behavior of G91 steel exposed to sodium. The carbon concentrations in sodium in Argonne’s SMT-1 and SMT-2 loops were determined by the equilibration method. The carbon activity in sodium was established by equilibrating high-purity nickel in sodium, analyzing the material for carbon, and using the reported data on the carbon solubility for this material. The carbon activity results were combined with the carbon solubility data in sodium to establish the carbon concentration in sodium. The carbon concentrations in the SMT-1 and SMT-2 loop were estimated to be 1.23 and 0.25 ppm, respectively. With this initial success, we will continue to monitor the carbon contents in the two loops to correlate the microstructural and mechanical property changes with the sodium purity. Future experiments will also consider sodium exposure tests in controlled carbon activities. Online monitoring and control of carbon contents in sodium in nuclear reactors would also be of interest. Thermodynamic analysis was conducted to understand the carburization-decarburization behavior of G91 steel exposed to sodium in the SMT-1 and SMT-2 loops. The equilibrium carbon activity in the alloy was evaluated by the thermodynamics of M 23 C 6 carbides. The calculated carburization-decarburization boundary showed that G91 would undergo decarburization at 650°C in the SMT-1 loop and carburization at 600°C in the SMT-2 loop, which is consistent with our findings from the sodium exposure tests. Future work will include thermodynamic analysis of the carbon concentration – activity relationship including the effect of carbide-forming elements, vanadium and niobium in G91 steel. Kinetics of carbon diffusion and the effect on microstructure and mechanical performance under various service conditions will also be investigated. The ultimate goal is to understand the mechanisms and the kinetics of carbon transfer in the sodium-steel system and to provide a basis for predicting the effect of long-term decarburization-carburization process on the integrity of reactor components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Radial oscillations of viscous neutron stars: Zero diffusion case

In this article, the spectrum of radial oscillations of neutron stars is systematically studied within two frameworks of viscous relativistic hydrodynamics: the relativistic Navier-Stokes and Israel-Stewart theories. A correspondence is established between the discrete stellar eigenmodes and the continuous dispersion relation of perturbations around a homogeneous fluid, providing a basis for interpreting our numerical results. We analyze the Newtonian limit and assess the impact of relativistic corrections, such as the gravitational redshifting of microscopic relaxation timescales. We show that bulk viscosity can significantly affect the behavior of both hydrodynamic and nonhydrodynamic fundamental modes, and that, depending on the magnitude of the viscous effects, it is the nonhydrodynamic mode that becomes unstable beyond the turning point in a sequence of equilibrium configurations. These results provide a useful step toward systematic studies of neutron star quasinormal modes in the presence of viscosity.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical investigation of electromagnetic pulse welded interfaces between dissimilar metals

The quality of an electromagnetic pulse weld is strongly affected by a variety of interacting physical phenomena including large plastic deformation, materials mixing, localised heating and rapid cooling, and possible localised melting and interfacial cracks and void. In the present study, a thermomechanically coupled dynamic model has been developed to quantitatively resolve the high speed impact joining interface characteristics as well as the process induced interface temperature evolution, defect formation and possible microstructural composition variations. Reasonably good agreement has been obtained between the predicted results and the experimental measurements in terms of interfacial morphology characteristics. The modelling framework is expected to provide further understanding of the hierarchical interfacial features of the non-equilibrium material joining process and the weld formation mechanisms.

Xu, W.↗

Local nonlinear rf forces in inhomogeneous magnetized plasmas

The local nonlinear forces induced by radio frequency (rf) waves are derived in inhomogeneous magnetized plasmas, where the inhomogeneity exists in the rf fields, in the static magnetic field as well as in the equilibrium density and temperature. The local parallel force is completely resonant, but a novel component dependent on those inhomogeneities is obtained as the result of the inhomogeneous transport of parallel resonant-absorbed momentum by the nonlinear perpendicular drift flux. In the local poloidal force, the component induced by the inhomogeneity of rf power absorption is also confirmed and it can be recognized as the residual effect from the incomplete cancellation between the rate of the diamagnetic poloidal momentum gain and the Lorentz force due to the radial diffusion-like flux. The compact expression for radial force is also obtained for the first time, whose nonresonant component is expressed as the sum of the ponderomotive force on particles and the gradients of the nonresonant perpendicular pressure and of the nonresonant momentum flux due to the finite temperature effect. Numerical calculations in a 1-D slab model show that the resonant component dependent on the inhomogeneities may be significant when the ion absorption dominates the resonant wave-particle interaction. A quantitative estimation shows that the novel component in the parallel force is important to understand the experiments of the ion-cyclotron-frequency mode-conversion flow drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Temperature Chemical Compatibility of As-Fabricated TRIGA Fuel and Type 304 Stainless Steel Cladding

Chemical interaction between TRIGA fuel and Type-304 stainless steel cladding at relatively high temperatures is of interest from the point of view of understanding fuel behavior during different TRIGA reactor transient scenarios. Since TRIGA fuel comes into close contact with the cladding during irradiation, there is an opportunity for interdiffusion between the U in the fuel and the Fe in the cladding to form an interaction zone that contains U-Fe phases. Based on the equilibrium U-Fe phase diagram, a eutectic can develop at a composition between the U 6 Fe and UFe 2 phases. This eutectic composition can become a liquid at around 725°C. From the standpoint of safe operation of TRIGA fuel, it is of interest to develop better understanding of how a phase with this composition may develop in irradiated TRIGA fuel at relatively high temperatures. One technique for investigating the development of a eutectic phase at the fuel/cladding interface is to perform out-of-pile diffusion-couple experiments at relatively high temperatures. This information is most relevant for lightly irradiated fuel that just starts to touch the cladding due to fuel swelling. Similar testing using fuel irradiated to different fission densities should be tested in a similar fashion to generate data more relevant to more heavily irradiated fuel. This report describes the results for TRIGA fuel/Type-304 stainless steel diffusion couples that were annealed for one hour at 730 and 800°C. Scanning electron microscopy with energy- and wavelength-dispersive spectroscopy was employed to characterize the fuel/cladding interface for each diffusion couple to look for evidence of any chemical interaction. Overall, negligible fuel/cladding interaction was observed for each diffusion couple.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rigidity‐Driven Structural Isomers in the NaCl–Ga 2 S 3 System: Implications for Energy Storage

Alternative energy sources require the search for innovative materials with promising functionalities. Systems with unusual chemical properties represent an insufficiently explored domain, concealing unexpected features. Using diffraction and Raman spectroscopy over a wide temperature range, supported by first‐principles simulations, a rare phenomenon is unveiled: phase‐dependent chemical interactions between binary components in the NaCl–Ga 2 S 3 system. In this unique occurrence, previously intact binary crystalline species transform upon melting into mixed liquid structural isomers, forming bonds with new partners. The chemical combinatorics appears to be fully reversible for stable crystals and liquids. Despite this, rapidly frozen glasses out of thermodynamic equilibrium remain in a metastable isomeric state, offering remarkable properties, particularly a high room‐temperature Na + conductivity, comparable to the best sodium halide superionic conductors and therefore encouraging for sodium solid‐state batteries and energy applications. A rigidity paradigm is responsible for the observed phenomenon, as the extremely constrained Ga 2 S 3 crystal lattice does not survive viscous flow, breaking up at a short‐range level. The removal of rigidity constraints and dense packing leads to a significant increase in empty space, which is the origin of high sodium diffusivity. Broadly, the rigidity‐driven structural isomerism opens up an inspiring path to the discovery of atypical materials.

25 ENERGY STORAGE↗

Temperature-dependent stability of θ'-Al 2 Cu precipitates investigated with phase field simulations and experiments

The upper limit of service temperature for many Al-Cu alloys is determined by the thermal stability of strengthening θ' (Al 2 Cu) precipitates. Above a certain temperature, θ' precipitates will undergo morphological evolution and transform into the detrimental, equilibrium θ phase, leading to a rapid drop in strength. Certain alloying elements have recently been reported to increase the thermal stability of θ' precipitates, by mechanisms that are yet unclear. Herein, we investigate the effect of modified interfacial energy and solute chemical mobility on the thermal stability of θ' via high-throughput phase field study. We identify a critical θ' aspect ratio to predict the onset of θ formation. Using this criterion, we predict the time required for θ' to θ phase transformation as a function of temperature, Cu diffusivity, and the interfacial energy of θ' precipitates. The predicted times compare favorably with reported times for θ formation under similar experimental conditions. Furthermore, these phase field simulations predict that a moderate reduction in Cu mobilityis adequate to stabilize the as-aged microstructure up to 300 °C, while substantial reductions to both interfacial energy and Cu mobility are needed to achieve similar stability at 400 °C. Experimental microstructural evolution results in commercial (319) and thermally stabilized (RR350) cast aluminum alloys are presented to complement the simulations.

36 MATERIALS SCIENCE↗

Control of the hierarchical assembly of π-conjugated optoelectronic peptides by pH and flow

Self-assembled nanoaggregates of p-conjugated peptides possess optoelectronic properties due to electron delocalization over the conjugated peptide groups that make them attractive candidates for the fabrication of bioelectronic materials. We present a computational and theoretical study to resolve the microscopic effects of pH and flow on the non-equilibrium morphology and kinetics of early-stage assembly of an experimentally-realizable optoelectronic peptide that displays pH triggerable assembly. Employing coarse-grained molecular dynamics simulations, we probe the effects of pH on growth kinetics and aggregate morphology to show that control of the peptide protonation state by pH can be used to modulate the assembly rates, degree of molecular alignment, and resulting morphologies within the self-assembling nanoaggregates. We also quantify the time and length scales at which convective flows employed in directed assembly compete with microscopic diffusion to show that flow influences cluster alignment and assembly rate during early-stage assembly only at extremely high shear rates. This suggests that observed improvements in optoelectronic properties at experimentally-accessible shear rates are due to the alignment of large aggregates of hundreds of monomers on time scales in excess of hundreds of nanoseconds. Lastly, our work provides new fundamental understanding of the effects of pH and flow to control the morphology and kinetics of early-stage assembly of p-conjugated peptides and lays the groundwork for the rational manipulation of environmental conditions to direct assembly and the attendant emergent optoelectronic properties.

36 MATERIALS SCIENCE↗

Melting curves and structural properties of tantalum from the modified-Z method

The melting curves and structural properties of tantalum (Ta) are investigated by molecular dynamics simulations combining with potential model developed by Ravelo et al. [Phys. Rev. B 88, 134101 (2013)]. Before calculations, five potentials are systematically compared with their abilities of producing reasonable compressional and equilibrium mechanical properties of Ta. We have improved the modified-Z method introduced by Wang et al. [J. Appl. Phys. 114, 163514 (2013)] by increasing the sizes in L{sub x} and L{sub y} of the rectangular parallelepiped box (L{sub x} = L{sub y} ≪ L{sub z}). The influences of size and aspect ratio of the simulation box to melting curves are also fully tested. The structural differences between solid and liquid are detected by number density and local-order parameters Q{sub 6}. Moreover, the atoms' diffusion with simulation time, defects, and vacancies formations in the sample are all studied by comparing situations in solid, solid-liquid coexistence, and liquid state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High ionisation fraction plasmas in a low temperature, multidipole cusp plasma

The depletion of neutral helium atoms has been studied in an unmagnetised spherical plasma created by DC discharge in a multidipole confinement field. Knowing the neutral density profile is critical to predicting the equilibrium flow of such plasmas. A model of the emissivity due to electron-impact excitation of neutral atoms in the plasma has been derived and used to fit radiance measurements of several neutral transitions to extract the radial profile of neutral density for plasmas of varying temperature and density. We report a depletion of the core neutral density varying between negligible levels to 80 % of the edge neutral density depending on the input power and fuelling. The corresponding ionisation fraction varies between 30–80 % in the plasma core. A simple neutral diffusion model is sufficient to describe the shape of neutral density profile implied by the radiance measurements. We have used the measurements to include a drag force due to neutral charge-exchange collisions in simulations of driven plasma flow. The simulation predicts a better fit to Mach probe flow measurements when this neutral drag is accounted for. This study shows that accounting for a realistic neutral profile is important to predict the plasma flow geometry and its magnetohydrodynamics (MHD) stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spiral waves in externally excited neuronal network: Solvable model with a monotonically differentiable magnetic flux

Spiral waves are particular spatiotemporal patterns connected to specific phase singularities representing topological wave dislocations or nodes of zero amplitude, witnessed in a wide range of complex systems such as neuronal networks. The appearance of these waves is linked to the network structure as well as the diffusion dynamics of its blocks. We report a novel form of the Hindmarsh-Rose neuron model utilized as a square neuronal network, showing the remarkable multistructure of dynamical patterns ranging from characteristic spiral wave domains of spatiotemporal phase coherence to regions of hyperchaos. The proposed model comprises a hyperbolic memductance function as the monotone differentiable magnetic flux. Hindmarsh-Rose neurons with an external electromagnetic excitation are considered in three different cases: no excitation, periodic excitation, and quasiperiodic excitation. We performed an extensive study of the neuronal dynamics including calculation of equilibrium points, bifurcation analysis, and Lyapunov spectrum. We have found the property of antimonotonicity in bifurcation scenarios with no excitation or periodic excitation and identified wide regions of hyperchaos in the case of quasiperiodic excitation. Furthermore, the formation and elimination of the spiral waves in each case of external excitation with respect to stimuli parameters are investigated. We have identified novel forms of Hindmarsh-Rose bursting dynamics. Our findings reveal multipartite spiral wave formations and symmetry breaking spatiotemporal dynamics of the neuronal model that may find broad practical applications. © 2019 Author(s).

60 APPLIED LIFE SCIENCES↗

Report on the Implementation of Homogeneous Nucleation Scheme in MARMOT-based Phase Field Simulation

In this report, we summarized our effort in developing mesoscale phase field models for predicting precipitation kinetics in alloys during thermal aging and/or under irradiation in nuclear reactors. The first part focused on developing a method to predict the thermodynamic properties of critical nuclei such as the sizes and concentration profiles of critical nuclei, and nucleation barrier. These properties are crucial for quantitative simulations of precipitate evolution kinetics with phase field models. Fe-Cr alloy was chosen as a model alloy because it has valid thermodynamic and kinetic data as well as it is an important structural material in nuclear reactors. A constrained shrinking dimer dynamics (CSDD) method was developed to search for the energy minimum path during nucleation. With the method we are able to predict the concentration profiles of the critical nuclei of Cr-rich precipitates and nucleation energy barriers. Simulations showed that Cr concentration distribution in the critical nucleus strongly depends on the overall Cr concentration as well as temperature. The Cr concentration inside the critical nucleus is much smaller than the equilibrium concentration calculated by the equilibrium phase diagram. This implies that a non-classical nucleation theory should be used to deal with the nucleation of Cr precipitates in Fe-Cr alloys. The growth kinetics of both classical and non-classical nuclei was investigated by the phase field approach. A number of interesting phenomena were observed from the simulations: 1) a critical classical nucleus first shrinks toward its non-classical nucleus and then grows; 2) a non-classical nucleus has much slower growth kinetics at its earlier growth stage compared to the diffusion-controlled growth kinetics. 3) a critical classical nucleus grows faster at the earlier growth stage than the non-classical nucleus. All of these results demonstrated that it is critical to introduce the correct critical nuclei into phase field modeling in order to correctly capture the kinetics of precipitation. In most alloys the matrix phase and precipitate phase have different concentrations as well as different crystal structures. For example, Cu precipitates in FeCu alloys have fcc crystal structure while the matrix Fe-Cu solid solution has bcc structure at low temperature. The WBM model and KimS model, where both concentrations and order parameters are chosen to describe the microstructures, are commonly used to model precipitations in such alloys. The WBM and KimS models have not been implemented into Marmot yet. In the second part of this report, we focused on implementing the WBM and KimS models into Marmot. The Fe-Cu alloys, which are important structure materials in nuclear reactors, was taken as the model alloys to test the models.

Fe Alloys↗

Multimodal X-ray Microscopy: The Kinetics of Cu in CdTe Absorbers

The behavior of solar cells is very often limited by inhomogeneously distributed nanoscale defects. This is the case throughout the entire lifecycle of the solar cell, from the distribution of elements and defects during solar cell growth as well as the charge-collection and recombination during operation, to degradation and failure mechanisms due to impurity diffusion, crack formation, and irradiation- and heat-induced cell damage This has been known for a while in the field of crystalline silicon, but inhomogeneities are far more abundant in polycrystalline materials, and are the limiting factor in thin-film solar cells where grain sizes are often on the order of the diffusion length. We showed that the high penetration of hard X-rays combined with the high sensitivity to elemental distribution, structure, and spatial resolution offers a unique avenue for highly correlative studies at the nanoscale. We presented results on Cu-doped CdTe, where carrier collection is directly correlated to the kinetics of Cu inside the absorber and the particular Cu-phases at the ZnTe/CdTe interface. We complemented the results with modeling using PVRD-FASP and PyCDTS, where the X-ray beam induced profile can be reproduced by the equilibrium defect concentrations proposed by the solvers.

Bertoni, Mariana↗