Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSIL FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Titanium Niobium Oxide: From Discovery to Application in Fast-Charging Lithium-Ion Batteries

Lithium-ion batteries are essential for portable technology and are now poised to disrupt a century of combustion-based transportation. The electrification revolution could eliminate our reliance on fossil fuels and enable a clean energy future; advanced batteries would facilitate this transition. However, owing to the demanding performance, cost, and safety requirements, it is challenging to translate new materials from laboratory prototypes to industrial-scale products. This Perspective describes that journey for a new lithium-ion battery anode material, TiNb 2 O 7 (TNO). TNO is intended as an alternative to graphite or Li 4 Ti 5 O 12 with better rate and safety characteristics than the former and higher energy density than the latter. The high capacity of TNO stems from the multielectron redox of Nb 5+ to Nb 3+ , its operating voltage window well above the Li + /Li reduction potential prevents lithium dendrite formation, and its open crystal structure leads to high-power performance. Nevertheless, the creation of a practical TNO anode was nonlinear and nontrivial. Its history is built on 30 years of fundamental science that preceded its application as a battery anode, and its battery development included a nearly 30-year gap. The insights and lessons contained in this Perspective, many of them acquired firsthand, serve two purposes: (i) to unite the disparate studies of TiNb 2 O 7 into a coherent modern understanding relevant to its application as a battery material and (ii) to highlight briefly some of the challenges faced when scaling up a new material that affect TiNb 2 O 7 as well as new electrode candidates more generally.

25 ENERGY STORAGE↗
DOE OSTI2020

Translating a Material Discovery into a Commercial Product in the Modern Lithium-ion Battery Market

Lithium-ion batteries are essential for portable technology and are now poised to disrupt a century of combustion-based transportation. The electrification revolution could eliminate our reliance on fossil fuels and enable a clean energy future; advanced batteries would facilitate this transition. However, owing to the demanding performance, cost, and safety requirements, it is challenging to translate new materials from laboratory prototypes to commercial products. This Perspective describes that journey toward commercialization for a new lithium-ion battery anode material, TiNb2O7 (TNO). TNO is intended as an alternative to graphite or Li4Ti5O12 with better rate and safety characteristics than the former, and higher energy density than the latter. The high capacity of TNO stems from multielectron redox of Nb5+ to Nb3+, its operating voltage window well above Li+/Li reduction potential prevents lithium dendrite formation, and its open crystal structure leads to high-power performance. Nevertheless, the creation of a practical TNO anode was non-linear and non-trivial. Its history is built on 30 years on fundamental science that preceded its application as a battery, and its battery development included a nearly 30-year gap. The insights and lessons 2 contained in this Perspective, many of them acquired firsthand, serve two purposes: (i) to unite the disparate studies of TiNb2O7 into a coherent modern understanding relevant to its application as a battery material and (ii) to highlight some of the considerations of commercializing a new material that affect TiNb2O7 as well as new electrode candidates more generally.

Griffith, Kent J.↗
DOE OSTI2022

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Platinum and Gold Supported on Transition Metal Nitrides for Hydrogen Evolution in an Alkaline Electrolyte

Here, as the urgency to reduce reliance on fossil fuels increases due to carbon dioxide emissions, hydrogen produced by renewably powered water electrolysis has emerged as a promising technology. Alkaline electrolyzers typically exhibit lower current densities than acidic electrolyzers due to the slow kinetics of the hydrogen evolution reaction (HER) under alkaline conditions. This work developed Pt- and Au-modified transition metal nitride (TMN) thin films for improving alkaline HER kinetics. One monolayer Pt–VN, Pt–Mo 2 N, and Pt–TiN were the most promising thin-film catalysts, with alkaline HER activity approaching that of a bulk Pt foil. Additionally, the Gibbs free energy of adsorbed hydrogen was identified as a useful descriptor for alkaline HER activity on TMN and TMN-supported catalysts and has the potential to guide future studies on TMN-based catalysts for enhancing alkaline HER. For practical applications, the thin-film catalysts were then extended to Pt- and Au-modified TMN powders for alkaline HER. Both 5 wt % Pt/TiN and 2 wt % Pt/TiN powders exhibited lower overpotentials at 5 mA/cm 2 when normalized by the Pt electrochemical surface area than the commercial 5 wt % Pt/C benchmark, suggesting a Pt–TiN synergy that creates opportunities for more cost-effective alkaline HER cathodes. Moreover, 20 wt % Au/Mo 2 N also displayed an enhancement in HER activity when compared to the commercial 20 wt % Au/C benchmark.

58 GEOSCIENCES↗
DOE OSTI2022

Regionalized Life-Cycle Water Impacts of Microalgal-Based Biofuels in the United States

While algal biofuels have the potential to reduce the national reliance on fossil fuels, high water consumption associated with algal biomass cultivation represents a major concern potentially compromising the sustainable commercialization of this technology. This study focuses on quantifying the water footprint (WF) and water scarcity footprint (WSF) of renewable diesel derived from algal biomass and provides insights into where algal cultivation is less water-intensive than traditional ethanol and biodiesel feedstocks. Results are generated with an engineering process model developed to predict the life-cycle water consumption, considering green, blue, and gray water, of algae facilities across the United States at a high spatiotemporal resolution. The total WFs for Florida and Arizona are determined to be 13.1 and 17.6 m 3 GJ –1 , respectively. The blue WF in Arizona is shown to be 8.5 times larger than in Florida, while the green WF is 4.5 times smaller, but when combined into a total WF, there is just a 26% difference between the two locations. The analysis reveals that the total life-cycle WFs of algal renewable diesel are smaller than the optimal WFs of corn ethanol and soybean biodiesel. Algal systems benefit from higher growth rates and offer the opportunity to manage wastewater streams, therefore generating smaller green and gray WFs than those of conventional biofuels. Here, the WSF analysis identifies the Gulf Coast as the most suitable region for algal cultivation, with cultivation in the western US shown to exacerbate local water stress levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Unlocking Solutions: Innovative Approaches to Identifying and Mitigating the Environmental Impacts of Undocumented Orphan Wells in the United States

In the United States, hundreds of thousands of undocumented orphan wells have been abandoned, leaving the burden of managing environmental hazards to governmental agencies or the public. These wells, a result of over a century of fossil fuel extraction without adequate regulation, lack basic information like location and depth, emit greenhouse gases, and leak toxic substances into groundwater. For most of these wells, basic information such as well location and depth is unknown or unverified. Addressing this issue necessitates innovative and interdisciplinary approaches for locating, characterizing, and mitigating their environmental impacts. Our survey of the United States revealed the need for tools to identify well locations and assess conditions, prompting the development of technologies including machine learning to automatically extract information from old records (95%+ accuracy), remote sensing technologies like aero-magnetometers to find buried wells, and cost-effective methods for estimating methane emissions. Notably, fixed-wing drones equipped with magnetometers have emerged as cost-effective and efficient for discovering unknown wells, offering advantages over helicopters and quadcopters. Efforts also involved leveraging local knowledge through outreach to state and tribal governments as well as citizen science initiatives. These initiatives aim to significantly contribute to environmental sustainability by reducing greenhouse gases and improving air and water quality.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Consumptive Water Use from Electricity Generation in the Southwest under Alternative Climate, Technology, and Policy Futures

This research assesses climate, technological, and policy impacts on consumptive water use from electricity generation in the Southwest over a planning horizon of nearly a century. We employed an integrated modeling framework taking into account feedbacks between climate change, air temperature and humidity, and consequent power plant water requirements. These direct impacts of climate change on water consumption by 2095 differ with technology improvements, cooling systems, and policy constraints, ranging from a 3–7% increase over scenarios that do not incorporate ambient air impacts. Upon additional factors being changed that alter electricity generation, water consumption increases by up to 8% over the reference scenario by 2095. With high penetration of wet recirculating cooling, consumptive water required for low-carbon electricity generation via fossil fuels will likely exacerbate regional water pressure as droughts become more common and population increases. Adaptation strategies to lower water use include the use of advanced cooling technologies and greater dependence on solar and wind. Water consumption may be reduced by 50% in 2095 from the reference, requiring an increase in dry cooling shares to 35–40%. Alternatively, the same reduction could be achieved through photovoltaic and wind power generation constituting 60% of the grid, consistent with an increase of over 250% in technology learning rates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Impact of Clean Grid Transition on Wastewater Sector Greenhouse Gas Emissions

This study examines the spatial and temporal impacts of the U.S. clean energy grid transition on related greenhouse gas (GHG) emissions from the wastewater treatment industry. By analyzing data from 17,156 water resource recovery facilities (WRRFs) and state-specific grid decarbonization scenarios, the results project a 60% reduction in Scope 2 emissions by 2050, driven by the national shift to renewable energy. However, regional disparities are prominent, with northeastern and western states achieving the most significant reductions, while the Ohio Valley and Rockies are likely to experience higher emissions due to the reliance on fossil fuels. This study offers the first assessment of clean grid impacts on the WRRFs and highlights the need for targeted, region-specific strategies across different emission scopes. This research provides insights for policymakers and stakeholders in the wastewater sector, emphasizing the critical role of grid decarbonization in achieving GHG reduction goals.

Li, Xiatong↗
DOE OSTI2017

Field Validation of Supercritical CO 2 Reactivity with Basalts

Continued global use of fossil fuels places a premium on developing technology solutions to minimize increases in atmospheric CO 2 levels. CO 2 storage in reactive basalts might be one of these solutions by permanently converting injected gaseous CO 2 into solid carbonates. Herein we report results from a field demonstration where ~1000 MT of CO 2 was injected into a natural basalt formation in Eastern Washington State. Following two years of post-injection monitoring, cores were obtained from within the injection zone and subjected to detailed physical and chemical analysis. Nodules found in vesicles throughout the cores were identified as the carbonate mineral, ankerite Ca[Fe, Mg, Mn](CO 3 ) 2 . Carbon isotope analysis showed the nodules are chemically distinct as compared with natural carbonates present in the basalt and clear correlation with the isotopic signature of the injected CO 2 . These findings provide field validation of rapid mineralization rates observed from years of laboratory testing with basalts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Numerical Investigation of Susceptor-Catalyst Design for Ethylene Generation in Radio Frequency Based Reactors

Ethylene is the most widely produced petrochemical component in the world. Whether reactors are heated directly or indirectly via steam, manufacturers use economies of scale to overcome inherent thermodynamic inefficiencies when burning fossil fuels. While allowing large-scale operations to use alternative sources of energy and raw materials, new methods of supplying energy to chemical reactor systems can reduce the energy waste produced by conventional processes. One viable method for effectively supplying energy to reactor systems is electromagnetic (EM) induction heating. Using the properties of radio frequency (RF) waves, heterogeneous catalysts can be precisely targeted for heating inside reactors. Site-selective heating can greatly lower the energy requirements of the process by supplying heat to reaction sites while reducing needless heat transfer elsewhere. In this study, a microscale model was used to help create guidelines for susceptors and catalysts to improve ethylene production. The oxidative dehydrogenation of ethane is investigated by utilizing several catalysts and potential catalyst/susceptor combinations, with heat provided by an EM susceptor. Having the susceptors and catalyst function separately results in higher gradients in both heat and mass transfer, which drives transport through the catalyst region, while still providing adequate heating for endothermic reactions. However, using a susceptive core with a catalyst covering produces the maximum ethylene concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Transforming MOFs for energy applications using the guest@MOF concept

As the world transitions from fossil fuels to clean energy sources in the coming decades, many technological challenges will require chemists and material scientists to develop new materials for applications related to energy conversion, storage, and efficiency. Because of their unprecedented adaptability, metal–organic frameworks (MOFs) will factor strongly in this portfolio. By utilizing the broad synthetic toolkit provided by the fields of organic and inorganic chemistry, MOF pores can be customized to suit a particular application. Of particular importance is the ability to tune the strength of the interaction between the MOF pores and guest molecules. By cleverly controlling these MOF–guest interactions, the chemist may impart new function into the Guest@MOF materials otherwise lacking in vacant MOF. Herein, we highlight the concept of the Guest@MOF as it relates to our efforts to develop these materials for energy-related applicatons. Additionally, our work in the areas of H 2 and noble gas storage, hydrogenolysis of biomass, light-harvesting, and conductive materials will be discussed. Of relevance to light-harvesting applications, we report for the first time a postsynthetic modification strategy for increasing the loading of a light-sensitive electron-donor molecule in the pores of a functionalized MIL-101 structure. Through the demonstrated versatility of these approaches, we show that, by treating guest molecules as integral design elements for new MOF constructs, MOF science can have a significant impact on the advancement of clean energy technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Quantum Chemical Study of CH 3 + O 2 Combustion Reaction System: Catalytic Effects of Additional CO 2 Molecule

The supercritical carbon dioxide diluent is used to control the temperature and to increase the efficiency in oxycombustion fossil fuel energy technology. It may affect the rates of combustion by altering mechanisms of chemical reactions, compared to the ones at low CO 2 concentrations. In this work, we explore potential energy surfaces of the four elementary reactions in the CH 3 + O 2 reactive system in the presence of one CO 2 molecule. In the case of reaction CH 3 + O 2 → CH 2 O + OH (R1 channel), van der Waals (vdW) complex formation stabilizes the transition state and reduces the activation barrier by ~2.2 kcal/mol. Alternatively, covalently bonded CO 2 may form a six-membered ring transition state and reduce the activation barrier by ~0.6 kcal/mol. In case of reaction CH 3 + O 2 → CH 3 O + O (R2 channel), covalent participation of CO 2 lowers the barrier for the rate limiting step by 3.9 kcal/mol. This is expected to accelerate the R2 process, important for the branching step of the radical chain reaction mechanism. For the reaction CH 3 + O 2 → CHO + H 2 O (R3 channel) with covalent participation of CO 2 , the activation barrier is lowered by 0.5 kcal/mol. The reaction CH 2 O + OH → CHO + H 2 O (R4 channel) involves hydrogen abstraction from formaldehyde by OH radical. Its barrier is reduced from 7.1 to 0.8 kcal/mol by formation of vdW complex with spectator CO 2 . These new findings are expected to improve the kinetic reaction mechanism describing combustion processes in supercritical CO 2 medium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Sulfur Speciation in Biochars by Very High Resolution Benchtop Kα X-ray Emission Spectroscopy

The analytical chemistry of sulfur-containing materials poses substantial technical challenges, especially due to the limitations of 33S NMR and the time-intensive preparations required for wet-chemistry analyses. A number of prior studies have found that synchrotron-based X-ray absorption near edge structure (XANES) measurements can give detailed speciation of sulfur chemistry in such cases. However, due to the obvious access limitations, synchrotron XANES of sulfur cannot be part of routine analytical practice across the chemical sciences community. Here, in a study of the sulfur chemistry in biochars, we compare and contrast the chemical inferences available from synchrotron XANES with that given by benchtop, extremely high resolution wavelength-dispersive X-ray fluorescence (WD-XRF) spectroscopy, also often called X-ray emission spectroscopy (XES). While the XANES spectra have higher total information content, often giving differentiation between different moieties having the same oxidation state, the lower sensitivity of the S Ka XES to coordination and local structure provides pragmatic benefit for the more limited goal of quantifying the S oxidation state distribution. Within that constrained metric, we find good agreement between the two methods. As the sulfur concentrations were as low as 150 ppm, these measurements provide proof-of-principle for characterization of the sulfur chemistry of biochars and potential applications to other areas such as soils, batteries, catalysts, and fossil fuels and their combustion products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Molecular Dynamics of Combustion Reactions in Supercritical Carbon Dioxide. Part 5: Computational Study of Ethane Dissociation and Recombination Reactions C 2 H 6 ⇌ CH 3 + CH 3

Fossil fuel oxy-combustion is an emerging technology where the habitual nitrogen diluent is replaced by high-pressure supercritical CO 2 (sCO 2 ), which increases the efficiency of energy conversion. In this study, the chemical kinetics of the combustion reaction C 2 H 6 ⇌ CH 3 + CH 3 in the sCO 2 environment is predicted at 30–1000 atm and 1000–2000 K. We adopt a multiscale approach, where the reactive complex is treated quantum mechanically in rigid rotor/harmonic oscillator approximation, while environment effects at different densities are taken into account by the potential of mean force, produced with classical molecular dynamics (MD). Here, we used boxed MD, where enhanced sampling of infrequent events of barrier crossing is accomplished without application of the bias potential. The multistate empirical valence bond model is applied to describe free radical formation accurately at the cost of the classical force field. Predicted rates at low densities agree well with the literature data. In conclusion, rate constants at 300 atm are 2.41 × 10 14 T –0.20 exp(–77.03 kcal/mol/RT) 1/s for ethane dissociation and 8.44 × 10 –19 T 1.42 exp(19.89 kcal/mol/RT) cm 3 /molecule/s for methyl–methyl recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular Dynamics Simulations of Supercritical Carbon Dioxide and Water using TraPPE and SWM4-NDP Force Fields

The increased levels of carbon dioxide (CO 2 ) emissions due to the combustion of fossil fuels and the consequential impact on global climate change have made CO 2 capture, storage, and utilization a significant area of focus for current research. In most electrochemical CO 2 applications, water is used as a proton donor due to its high availability and mobility and use as a polar solvent. Additionally, supercritical CO 2 is a promising avenue for electrochemical applications due to its unique chemical and physical properties. Consequently, understanding the interactions between water and supercritical CO 2 is of great importance for future electrochemical applications. Molecular dynamics (MD) simulation is a powerful tool that enables atomistic-resolution dynamics of molecular systems, which can complement and guide future experimental investigations. This study employed atomistic MD to study the cosolubilities, codiffusivities, and structure of supercritical CO 2 and water systems, with a polarizable water model (SWM4-NDP) and a nonpolarizable CO 2 model (TraPPE). Additionally, ab initio MD simulations were used to better understand how atomistic polarizable/nonpolarizable models compare to explicit modeling of electron densities. The polarizable water model exhibited substantial improvement in water-associated properties. In conclusion, we anticipate the development of a compatible polarizable CO 2 model to yield similar improvement, providing a pathway for realizing novel high-pressure electrochemical systems.

25 ENERGY STORAGE↗
DOE OSTI2018

Renewable Hydride Donors for the Catalytic Reduction of CO 2 : A Thermodynamic and Kinetic Study

Increasing atmospheric CO2 concentration and dwindling fossil fuel supply necessitate the search for efficient methods for CO2 conversion to fuels. Assorted studies have shown pyridine and its derivatives capable of (photo)electrochemically reducing CO2 to methanol, and some mechanistic interpretations have been proposed. Here, we analyze the thermodynamic and kinetic aspects of the efficacy of pyridines as hydride-donating catalytic reagents that transfer hydrides via their dihydropyridinic form. We investigate both the effects of functionalizing pyridinic derivatives with electron-donating and electron-withdrawing groups on hydride-transfer catalyst strength, assessed via their hydricity (thermodynamic ability) and nucleophilicity (kinetic ability), and catalyst recyclability, assessed via their reduction potential. We find that pyridines substituted with electron-donating groups have stronger hydride-donating ability (having lower hydricity and larger nucleophilicity values), but are less efficiently recycled (having more negative reduction potentials). In contrast, pyridines substituted with electron-withdrawing groups are more efficiently recycled, but are weaker hydride donors. Functional group modification favorably tunes hydride strength or efficiency, but not both. We attribute this problematic coupling between the strength and recyclability of pyridinic hydrides to their aromatic nature and suggest several avenues for overcoming this difficulty.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Selective Electrocatalytic Reduction of CO 2 into CO at Small, Thiol-Capped Au/Cu Nanoparticles

The electrochemical CO 2 reduction reaction (CO 2 RR) is a promising approach for converting fossil fuel emissions into environmentally sustainable chemicals and fuels. The ability to control the surface structure of CO 2 RR nanocatalysts provides an opportunity to tune product selectivity. Bimetallic gold–copper catalysts have been identified as emerging electrocatalyst candidates, but Cu incorporation typically lowers product selectivity compared with pure Au. Here we show sustained CO selectivity and activity up to 49% Cu content in small (<2 nm), thiol-capped Au/Cu nanoparticles (NPs). Bimetallic NPs containing 49% Cu selectivity converted CO 2 into CO with 100 ± 6% CO Faradaic efficiency and average mass activity of ~500 mA/mg during a 12 h electrolysis experiment at –0.8 V vs RHE. Au/Cu NPs synthesized without thiol ligands selectively produced H 2 , whereas larger (>10 nm), thermally dethiolated Au/Cu NPs produced a wider product distribution including H 2 , CO, and C 2 H 4 . Density functional theory (DFT) modeling of CO 2 RR and H 2 evolution at realistic, thiol-capped Au/Cu NP structures indicated that copper–thiol surface structures sustained CO selectivity by stabilizing key *CO intermediates while making *H binding less favorable. Calculations also predicted that removing a significant fraction of the thiol ligands would increase *CO binding strength such that desorption of CO product molecules could become the most thermodynamically challenging step. This result, coupled with increased *H stability on dethiolated nanoclusters, points to decreased CO 2 RR selectivity for small, ligand-free catalysts, which is in line with experimental observations from our group and others. Here, our results demonstrate that thiol-ligand surface structures can sustain the CO selectivity of bimetallic Au/Cu NPs and reduce precious metal requirements for CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Nanoscale Detection of Intermediate Solid Solutions in Equilibrated Li x FePO 4 Microcrystals

Redox-driven phase transformations in solids determine the performance of lithium-ion batteries, crucial in the technological transition from fossil fuels. Couplings between chemistry and strain define reversibility and fatigue of an electrode. The accurate definition of all phases in the transformation, their energetics, and nanoscale location within a particle produces fundamental understanding of these couplings needed to design materials with ultimate performance. In this paper we demonstrate that scanning X-ray diffraction microscopy (SXDM) extends our ability to image battery processes in single particles. In LiFePO 4 crystals equilibrated after delithiation, SXDM revealed the existence of domains of miscibility between LiFePO 4 and Li 0.6 FePO 4 . These solid solutions are conventionally thought to be metastable, and were previously undetected by spectromicroscopy. The observation provides experimental verification of predictions that the LiFePO 4 –FePO 4 phase diagram can be altered by coherency strain under certain interfacial orientations. Finally, it enriches our understanding of the interaction between diffusion, chemistry, and mechanics in solid state transformations.

25 ENERGY STORAGE↗