Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Operation of resonant-tunneling diodes with strong back injection from the collector at frequencies up to 1.46 THz

In search for possibilities to increase the operating frequencies of resonant-tunneling diodes (RTDs), we are studying RTDs working in an unusual regime. The collector side of our diodes is so heavily doped that the collector depletion region is fully eliminated in our RTDs and the ground quantum-well subband stays immersed under (or stays close to) the collector quasi-Fermi level. The electron injection from the collector into the RTD quantum well is very strong in our diodes and stays comparable to that from the emitter in the whole range of RTD operating biases. Our RTDs exhibit well pronounced negative-differential-conductance region and peak-to-valley current ratio around 1.8. We demonstrate operation of our diodes in RTD oscillators up to 1.46 THz. We also observe a fine structure in the emission spectra of our RTD oscillators, when they are working in the regime close to the onset of oscillations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-bias negative differential resistance effect in armchair graphene nanoribbon junctions

Graphene nanoribbons with armchair edges (AGNRs) have bandgaps that can be flexibly tuned via the ribbon width. A junction made of a narrower AGNR sandwiched between two wider AGNR leads was recently reported to possess two perfect transmission channels close to the Fermi level. Here, we report that by using a bias voltage to drive these transmission channels into the gap of the wider AGNR lead, we can obtain a negative differential resistance (NDR) effect. Owing to the intrinsic properties of the AGNR junctions, the on-set bias reaches as low as ∼0.2 V and the valley current almost vanishes. We further show that such NDR effect is robust against details of the atomic structure of the junction, substrate, and whether the junction is made by etching or by hydrogenation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing photocatalysis in SrTiO{sub 3} by using Ag nanoparticles: A two-step excitation model for surface plasmon-enhanced photocatalysis

Surface plasmon (SP)-enhanced ultraviolet and visible photocatalytic activities of SrTiO{sub 3} (STO) are observed after incorporating Ag nanoparticles (Ag-NPs) on STO surfaces. A two-step excitation model is proposed to explain the SP-enhanced photocatalysis. The point of the model is that an electron at the valence band of STO is first excited onto the Fermi level of Ag-NP by the SP field generated on the Ag-NP, and then injected into the conduction band of STO from the SP band, leaving a hole at the valence band of STO. A full redox catalytic reaction at the surface of STO is then available. For Ag-NP incorporated STO, up-converted and inter-band photoluminescence emissions of STO are observed, and nonlinear evolutions of photocatalytic activity with illumination light powers are found. Furthermore, near infrared photocatalysis is detected. These results support the proposed model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High spin polarization and the origin of unique ferromagnetic ground state in CuFeSb

CuFeSb is isostructural to the ferro-pnictide and chalcogenide superconductors and it is one of the few materials in the family that are known to stabilize in a ferromagnetic ground state. Majority of the members of this family are either superconductors or antiferromagnets. Therefore, CuFeSb may be used as an ideal source of spin polarized current in spin-transport devices involving pnictide and the chalcogenide superconductors. However, for that the Fermi surface of CuFeSb needs to be sufficiently spin polarized. In this paper we report direct measurement of transport spin polarization in CuFeSb by spin-resolved Andreev reflection spectroscopy. From a number of measurements using multiple superconducting tips we found that the intrinsic transport spin polarization in CuFeSb is high (∼47%). In order to understand the unique ground state of CuFeSb and the origin of large spin polarization at the Fermi level, we have evaluated the spin-polarized band structure of CuFeSb through first principles calculations. Apart from supporting the observed 47% transport spin polarization, such calculations also indicate that the Sb-Fe-Sb angles and the height of Sb from the Fe plane are strikingly different for CuFeSb than the equivalent parameters in other members of the same family thereby explaining the origin of the unique ground state of CuFeSb.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Boron Nitride Nanoribbons Becomes Metallic

Standard spin-polarized density functional theory calculations have been conducted to study the electronic structures and magnetic properties of O and S functionalized zigzag boron nitride nanoribbons (zBNNRs). Unlike the semiconducting and nonmagnetic H edge-terminated zBNNRs, the O edge-terminated zBNNRs have two energetically degenerate magnetic ground states with a ferrimagnetic character on the B edge, both of which are metallic. In contrast, the S edge-terminated zBNNRs are nonmagnetic albeit still metallic. An intriguing coexistence of two different Peierls-like distortions is observed for S edge-termination that manifests as a strong S dimerization at the B zigzag edge and a weak S trimerization at the N zigzag edge, dictated by the band fillings at the vicinity of the Fermi level. Nevertheless, metallicity is retained along the S wire on theNedge due to the partial filling of the band derived from the pz orbital of S. A second type of functionalization with O or S atoms embedded in the center of zBNNRs yields semiconducting features. Detailed examination of both types of functionalized zBNNRs reveals that the p orbitals on O or S play a crucial role in mediating the electronic structures of the ribbons.We suggest that O and S functionalization of zBNNRs may open new routes toward practical electronic devices based on boron nitride materials.

36 MATERIALS SCIENCE↗

Rare-earth transition-metal gallium chalcogenides RE{sub 3}MGaCh{sub 7} (M=Fe, Co, Ni; Ch=S, Se)

Six series of quaternary rare-earth transition-metal chalcogenides RE{sub 3}MGaCh{sub 7} (M=Fe, Co, Ni; Ch=S, Se), comprising 33 compounds in total, have been prepared by reactions of the elements at 1050 °C (for the sulphides) or 900 °C (for the selenides). They adopt noncentrosymmetric hexagonal structures (ordered Ce{sub 3}Al{sub 1.67}S{sub 7}-type, space group P6{sub 3}, Z=2) with cell parameters in the ranges of a=9.5–10.2 Å and c=6.0–6.1 Å for the sulphides and a=10.0–10.5 Å and c=6.3–6.4 Å for the selenides as refined from powder X-ray diffraction data. Single-crystal structures were determined for five members of the sulphide series RE{sub 3}FeGaS{sub 7} (RE=La, Pr, Tb) and RE{sub 3}CoGaS{sub 7} (RE=La, Tb). The highly anisotropic crystal structures consist of one-dimensional chains of M-centred face-sharing octahedra and stacks of Ga-centred tetrahedra all pointing in the same direction. Magnetic measurements on the sulphides reveal paramagnetic behaviour in some cases and long-range antiferromagnetic behaviour with low Néel temperatures (15 K or lower) in others. Ga L-edge XANES spectra support the presence of highly cationic Ga tetrahedral centres with a tendency towards more covalent Ga–Ch character on proceeding from the sulphides to the selenides. Band structure calculations on La{sub 3}FeGaS{sub 7} indicate that the electronic structure is dominated by Fe 3d-based states near the Fermi level. - Graphical abstract: The series of chalcogenides RE{sub 3}MGaS{sub 7}, which form for a wide range of rare-earth and transition metals (M=Fe, Co, Ni), adopt highly anisotropic structures containing chains of M-centred octahedra and stacks of Ga-centred tetrahedra. Display Omitted - Highlights: • Six series (comprising 33 compounds) of chalcogenides RE{sub 3}MGaCh{sub 7} were prepared. • They adopt noncentrosymmetric hexagonal structures with high anisotropy. • Most compounds are paramagnetic; some show antiferromagnetic ordering. • Ga L-edge XANES confirms presence of cationic Ga species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption-induced magnetic properties and metallic behavior of graphene

Magnetic properties and electronic structures of graphene with Cl, S, and P adsorption have been investigated using ab initio calculations. The adsorption of Cl leads to Fermi level shifting to valence band, which results in metallic graphene. A band gap of 0.6 eV emerges in a S-absorbed graphene, leading to the semiconducting graphene. The unpaired electrons in the absorbed P atom is polarized and thus, exhibits a magnetic moment of 0.86 μB, while no magnetic moment has been observed after Cl and S adsorption. This demonstrates that the magnetic properties and conductive behavior of graphene can be modified via atom adsorption. Specially, P-absorbed graphene may be useful for spintronic applications, such as tunneling magnetoresistance.

36 MATERIALS SCIENCE↗

Electronic structure and electrical transport in ternary Al-Mg-B films prepared by magnetron sputtering

Nanostructured ternary Al-Mg-B films possess high hardness and corrosion resistance. In the present work, we study their electronic structure and electrical transport. The films exhibit semiconducting characteristics with an indirect optical-bandgap of 0.50 eV, as deduced from the Tauc plots, and a semiconductor behavior with a Fermi level of {approx}0.24 eV below the conduction band. Four-probe and Hall measurements indicated a high electrical conductivity and p-type carrier mobility, suggesting that the electrical transport is mainly due to hole conduction. Their electrical properties are explained in terms of the film nanocomposite microstructure consisting of an amorphous B-rich matrix containing AlMgB{sub 14} nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced thermoelectric power and electronic correlations in RuSe{sub 2}

We report the electronic structure, electric and thermal transport properties of Ru{sub 1−x}Ir{sub x}Se{sub 2} (x ≤ 0.2). RuSe{sub 2} is a semiconductor that crystallizes in a cubic pyrite unit cell. The Seebeck coefficient of RuSe{sub 2} exceeds −200 μV/K around 730 K. Ir substitution results in the suppression of the resistivity and the Seebeck coefficient, suggesting the removal of the peaks in density of states near the Fermi level. Ru{sub 0.8}Ir{sub 0.2}Se{sub 2} shows a semiconductor-metal crossover at about 30 K. The magnetic field restores the semiconducting behavior. Our results indicate the importance of the electronic correlations in enhanced thermoelectricity of RuSb{sub 2}.

36 MATERIALS SCIENCE↗

An accurate polynomial-based analytical charge control model for AlGaN/GaN HEMT

A new nonlinear expression of Fermi-level variation with two-dimensional electron gas density in a high electron mobility has been proposed. It was found that our expression has a better fit with the numerical results. And, an analytical expression for n{sub s} in terms of the applied gate voltage is developed. Comparing with other previous approximations, the solutions of our expression has a better agreement with the exact numerical results over the entire range of interest. Besides, the solutions of our expression of n{sub s} versus V{sub G} are compared with the experimental data and shown to be in good agreement over a wide range of bias conditions.

36 MATERIALS SCIENCE↗

Tunneling magnetoresistance in Fe{sub 3}Si/MgO/Fe{sub 3}Si(001) magnetic tunnel junctions

We present a theoretical study of the tunneling magnetoresistance (TMR) and spin-polarized transport in Fe{sub 3}Si/MgO/Fe{sub 3}Si(001) magnetic tunnel junction (MTJ). It is found that the spin-polarized conductance and bias-dependent TMR ratios are rather sensitive to the structure of Fe{sub 3}Si electrode. From the symmetry analysis of the band structures, we found that there is no spin-polarized Δ{sub 1} symmetry bands crossing the Fermi level for the cubic Fe{sub 3}Si. In contrast, the tetragonal Fe{sub 3}Si driven by in-plane strain reveals half-metal nature in terms of Δ{sub 1} state. The giant TMR ratios are predicted for both MTJs with cubic and tetragonal Fe{sub 3}Si electrodes under zero bias. However, the giant TMR ratio resulting from interface resonant transmission for the former decreases rapidly with the bias. For the latter, the giant TMR ratio can maintain up to larger bias due to coherent transmission through the majority-spin Δ{sub 1} channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Communication: DMRG-SCF study of the singlet, triplet, and quintet states of oxo-Mn(Salen)

We use CHEMPS2, our free open-source spin-adapted implementation of the density matrix renormalization group (DMRG) [S. Wouters, W. Poelmans, P. W. Ayers, and D. Van Neck, Comput. Phys. Commun. 185, 1501 (2014)], to study the lowest singlet, triplet, and quintet states of the oxo-Mn(Salen) complex. We describe how an initial approximate DMRG calculation in a large active space around the Fermi level can be used to obtain a good set of starting orbitals for subsequent complete-active-space or DMRG self-consistent field calculations. This procedure mitigates the need for a localization procedure, followed by a manual selection of the active space. Per multiplicity, the same active space of 28 electrons in 22 orbitals (28e, 22o) is obtained with the 6-31G{sup *}, cc-pVDZ, and ANO-RCC-VDZP basis sets (the latter with DKH2 scalar relativistic corrections). Our calculations provide new insight into the electronic structure of the quintet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rare-earth transition-metal indium sulphides RE{sub 3}FeInS{sub 7} (RE=La–Pr), RE{sub 3}CoInS{sub 7} (RE=La, Ce), and La{sub 3}NiInS{sub 7}

Six quaternary rare-earth-containing sulphides RE{sub 3}MInS{sub 7} (M=Fe, Co, Ni) have been prepared by reactions of the elements at 1050–1150 °C. They are the first examples of chalcogenides RE{sub 3}MM'Ch{sub 7} adopting related La{sub 3}CuSiS{sub 7}- or ordered Ce{sub 3}Al{sub 1.67}S{sub 7}-type structures in which the M' component is indium. They crystallize in the noncentrosymmetric hexagonal space group P6{sub 3} with Z=2 and cell parameters in the ranges of a=9.95–10.15 Å and c=6.25–6.29 Å for RE{sub 3}FeInS{sub 7} (RE=La–Pr), RE{sub 3}CoInS{sub 7} (RE=La, Ce), and La{sub 3}NiInS{sub 7}. The crystal structure consists of parallel chains of face-sharing M-centred octahedra and stacks of In-centred tetrahedra, all pointing in the same polar direction, with seven-coordinate La atoms in the intervening spaces. X-ray photoelectron spectra support the valence assignments implied by the formulation (RE{sup 3+}){sub 3}(M{sup 2+})(In{sup 3+})(S{sup 2−}){sub 7}. Magnetic measurements are suggestive of antiferromagnetic coupling between the M moments. Band structure calculations reveal that a band gap of 0.25 eV is present in La{sub 3}FeInS{sub 7}, whereas the increased electron count in La{sub 3}CoInS{sub 7} and La{sub 3}NiInS{sub 7} causes the Fermi level to cut narrow bands. - Graphical abstract: RE{sub 3}MInS{sub 7} (M=Fe, Co, Ni) consists of chains of face-sharing M-centred octahedra and stacks of In-centred tetrahedra. - Highlights: • Six members of noncentrosymmetric sulphide series RE{sub 3}MInS{sub 7} have been prepared. • They are the first examples of chalcogenides RE{sub 3}MM'Ch{sub 7} with In atoms in M' site. • X-ray photoelectron spectra support the formulation (RE{sup 3+}){sub 3}(M{sup 2+})(In{sup 3+})(S{sup 2−}){sub 7}. • Band structure calculations suggest semiconducting or metallic behaviour.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intrinsic spin dependent and ferromagnetic stability on edge saturated zigzag graphene-like carbon-nitride nanoribbons

Using first-principles calculations, we have investigated the electronic and magnetic properties of zigzag graphene-like carbon-nitride nanoribbons (Zg-CNNRs) with mono- and dihydrogen-terminated edges asymmetrically. The results demonstrate that spin-down channel completely dominates the states adjacent Fermi level, which is an intrinsic feature and can be accounted for the valence band maximum derived from the nonbonding N-(p{sub x},p{sub y}) orbitals, instead of the bonding C/N-p{sub z} π state. Importantly, ferromagnetic ordering is found to be preferred and the magnetism is entirely localized on the N sites of saturated edge due to its stronger electronegativity. Additionally, various edge saturations are further proposed to try to enhance the ferromagnetic ordering and to manipulate the magnetism distributions of Zg-CNNRs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band alignments in Fe/graphene/Si(001) junctions studied by x-ray photoemission spectroscopy

The control of tunnel contact resistance is of primary importance for semiconductor-based spintronic devices. This control is hardly achieved with conventional oxide-based tunnel barriers due to deposition-induced interface states. Manipulation of single 2D atomic crystals (such as graphene sheets) weakly interacting with their substrate might represent an alternative and efficient way to design new heterostructures for a variety of different purposes including spin injection into semiconductors. In the present paper, we study by x-ray photoemission spectroscopy the band alignments and interface chemistry of iron–graphene-hydrogenated passivated silicon (001) surfaces for a low and a high n-doping concentration. We find that the hydrogen passivation of the Si(001) surface remains efficient even with a graphene sheet on the Si(001) surface. For both doping concentrations, the semiconductor is close to flat-band conditions which indicates that the Fermi level is unpinned on the semiconductor side of the Graphene/Si(001):H interface. When iron is deposited on the graphene/Si(001):H structures, the Schottky barrier height remains mainly unaffected by the metallic overlayer with a very low barrier height for electrons, a sought-after property in semiconductor based spintronic devices. Finally, we demonstrate that the graphene layer intercalated between the metal and semiconductor also serves as a protection against iron-silicide formation even at elevated temperatures preventing from the formation of a Si-based magnetic dead layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Half metallic ferromagnetism in tri-layered perovskites Sr{sub 4}T{sub 3}O{sub 10}(T = Co, Rh)

First-principles density functional theory (DFT) is used to investigate the electronic and magnetic properties of Sr{sub 4}Rh{sub 3}O{sub 10}, a member of the Ruddlesden-Popper series. Based on the DFT calculations taking into account the co-operative effect of Coulomb interaction (U) and spin-orbit couplings (SOC), Sr{sub 4}Rh{sub 3}O{sub 10} is found to be a half metallic ferromagnet (HMF) with total magnetic moment μ{sub tot} = 12 μ{sub B} per unit cell. The material has almost 100% spin-polarization at the Fermi level despite of sizable SOC. Replacement of Rh atom by the isovalent Co atom is considered. Upon full-replacement of Co, a low-spin to intermediate spin transition happens resulting in a HMF state with the total magnetic moment three-time larger (i.e., μ{sub tot} = 36 μ{sub B} per unit cell), compared to Sr{sub 4}Rh{sub 3}O{sub 10}. We propose Sr{sub 4}Rh{sub 3}O{sub 10} and Sr{sub 4}Co{sub 3}O{sub 10} as candidates of half metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Competitive behavior of photons contributing to junction voltage jump in narrow band-gap semiconductor multi-quantum-well laser diodes at lasing threshold

The junction behavior of different narrow band-gap multi-quantum-well (MQW) laser diodes (LDs) confirmed that the jump in the junction voltage in the threshold region is a general characteristic of narrow band-gap LDs. The relative change in the 1310 nm LD is the most obvious. To analyze this sudden voltage change, the threshold region is divided into three stages by I{sub th}{sup l} and I{sub th}{sup u}, as shown in Fig. 2; I{sub th}{sup l} is the conventional threshold, and as long as the current is higher than this threshold, lasing exists and the IdV/dI-I plot drops suddenly; I{sub th}{sup u} is the steady lasing point, at which the separation of the quasi-Fermi levels of electron and holes across the active region (V{sub j}) is suddenly pinned. Based on the evolutionary model of dissipative structure theory, the rate equations of the photons in a single-mode LD were deduced in detail at I{sub th}{sup l} and I{sub th}{sup u}. The results proved that the observed behavior of stimulated emission suddenly substituting for spontaneous emission, in a manner similar to biological evolution, must lead to a sudden increase in the injection carriers in the threshold region, which then causes the sudden increase in the junction voltage in this region.

36 MATERIALS SCIENCE↗

Thermoelectric properties optimization of Fe{sub 2}VGa by tuning electronic density of states via titanium doping

We report the correlation between thermoelectric properties and electronic band structure of thermoelectric Heusler alloy Fe{sub 2}V{sub 1-x}Ti{sub x}Ga by comparing experimental measurements with theoretical calculations. The electrical resistivity data show that the semiconducting-like behavior of pure Fe{sub 2}VGa is transformed to a more metallic-like behavior at x = 0.1. Meanwhile, an enhancement of the Seebeck coefficient was observed for all Ti doped specimens at elevated temperatures with a peak value of 57 μV/K for x = 0.05 at 300 K. The experimental results can be elucidated by the calculated band structure, i.e., a gradual shifting of the Fermi level from the middle of the pseudogap to the region of valence bands. With optimized doping, the thermoelectric power factor can be significantly enhanced to 3.95 mW m{sup −1} K{sup −2} at room temperature, which is comparable to the power factors of Bi{sub 2}Te{sub 3}-based compounds. The synergy of thermal conductivity reduction due to the alloying effect and the significant increase of the thermoelectric power factor leads to higher order zT values than that of prime Fe{sub 2}VGa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗