Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flow separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Vortex cloud model for body vortex shedding and tracking

The discrete vortex cloud approach models a missile airframe's vortex wake by means that are capable of treating a variety of configurations over a range of flow conditions. Attention is given to the sheets of vorticity formed on the lee side of a missile at moderate angles-of-attack. While three-dimensional attached flow models are used to represent the missile body, two-dimensional, incompressible, separated flow models are used to represent the separated vortex wake. The predicted pressure distribution of the body under the influence of the freestream and the separation vortex wake are used to calculate aerodynamic loads on the body. The separation vortex wake is represented by clouds of discrete vortices in cross flow planes normal to the body axis.

Mendenhall, Michael R.↗

Computations of vortical supersonic flows over a blunt-nose-cylinder at high angles of attack

Three-dimensional, viscous, and separated flows over a blunt-nose-cylinder at 20, 32, and 44-deg attack angles were computed. The approaching freestream was at a Mach number of 1.6 and a unit Reynolds number of 2 x 10 to the 6th/ft with a total temperature of 585 R. The cylinder used for the computations had a length-to-diameter ratio of 6.67 with a base diameter of 3 in. The flowfield was dominated by large-scale and multiple vortices generated by crossflow separation. The effect of turbulence on the flow structure of one case was modeled algebraically with modifications to correct the length and velocity scales in the regions of separation. The mass averaged Navier-Stokes equations were solved by an approximately factored, upwind-biased, implicit, finite volume scheme. The initialization of the flows was enhanced by a mesh sequencing strategy applied to the diagonalized form of the discretized equations. The convergence to steady-state was accelerated by a multigrid algorithm and using the block inversions for the discretized equations. Calculations were compared with experimental results.

Baysal, O.↗

Time-resolved unsteady shock motion and spectral analysis of a hypersonic shock-wave/boundary-layer interaction over a double-cone

Direct experimental measurements of double-cone shock-wave/boundary-layer interaction dynamics at Mach 7.2 were collected using a schlieren-based shock-detection algorithm at the University of Texas at San Antonio. The points of flow separation and reattachment were spatially and spectrally evaluated at 300 kHz for time-resolved characterization of the unsteadiness of this flow field. The separation bubble was found to rapidly expand and contract about a large mean length. Spectral analysis of the velocity fluctuations of this motion revealed this behavior to be a turbulent phenomenon, with spectral energy trends consistent with the Kolmogorov theory for the turbulent energy cascade.

Glasby, Ryan [ORNL]↗

An experimental documentation of a hypersonic shock-wave turbulent boundary layer interaction flow: With and without separation

An experiment, thoroughly documenting the flow field resulting from the interaction of a shock wave with a nonadiabatic hypersonic turbulent boundary layer, is described. Detailed mean flow and surface data are presented for two shock strengths resulting in attached and separated flows, respectively. The surface measurements include continuous pressure, shear and heat-flux distributions upstream, in, and downstream of the interaction regions. At closely spaced intervals along the surface, boundary-layer profiles of static and pitot pressure and total temperature were obtained from which velocity, density and static temperature profiles were derived. The data are presented in both graphical and tabular form. These data are of sufficient detail to validate advanced computer codes and their associated turbulence models.

Kussoy, M. I.↗

Flow and heat transfer measurements in a pseudo-shock region with surface cooling

An experimental investigation was conducted to acquire information on the flow structure, mean flowfield, and temperature distributions in a pseudo-shock region in a supersonic diffuser with surface cooling. The Mach number upstream was 2.9, and the wall to stagnation temperature ratio was 0.44. A Mach-disk-like shock wave emanated from the thin separated flow region near the beginning of the compression region, and reattachment occurred one diameter downstream so that the flow was not separated over most of the pseudo-shock region. The flow compression was a shock-free, predominantly viscous process. Along the pseudo-shock region the measured heat-transfer coefficient increased approximately as the 0.8 power of the measured wall static pressure. The estimated wall shear stress increased downstream of flow attachment, but was still considerably less than the upstream value.

Cuffel, R. F.↗

Computation of saddle point of attachment

Low-speed flows over a cylinder mounted on a flat plate are studied numerically in order to confirm the existence of a saddle point of attachment in the flow before an obstacle, to analyze the flow characteristics near the saddle point theoretically, and to address the significance of the saddle point of attachment to the construction of external flow structures, the interpretation of experimental surface oil-flow patterns, and the theoretical definition of three-dimensional flow separation. Two numerical codes, one for an incompressible flow and another for a compressible flow, are used for various Mach numbers, Reynolds numbers, grid sizes, and numbers of grid points. It is pointed out that the potential presence of a saddle point of attachment means that a line of 'oil accumulation' from both sides of a skin-friction line emanating outward from a saddle point can be either a line of separation or a line of attachment.

Hung, Ching-Mao↗

An implicit multigrid scheme for hypersonic strong-interaction flowfields

An implicit multigrid method for the compressible Navier-Stokes equations is applied to a series of two-dimensional, steady, laminar hypersonic flows over a compression ramp, including both attached and separated flow conditions. The algorithm uses upwind-biased differencing for the convective and pressure terms and central differencing for the shear-stress and heat-transfer terms. An implicit spatially factored scheme is used to advance the solution in terms on a given mesh, and a V-cycle multigrid strategy is used to accelerate convergence. The multigrid algorithm provided an order of magnitude decrease in the computational time required to obtain a converged position of the separation location and enabled a substantially grid-independent result to be obtained for each of the flows considered.

Thomas, James L.↗

Active Flow Effectors for Noise and Separation Control

New flow effector technology for separation control and enhanced mixing is based upon shape memory alloy hybrid composite (SMAHC) technology. The technology allows for variable shape control of aircraft structures through actively deformable surfaces. The flow effectors are made by embedding shape memory alloy actuator material in a composite structure. When thermally actuated, the flow effector def1ects into or out of the flow in a prescribed manner to enhance mixing or induce separation for a variety of applications, including aeroacoustic noise reduction, drag reduction, and f1ight control. The active flow effectors were developed for noise reduction as an alternative to fixed-configuration effectors, such as static chevrons, that cannot be optimized for airframe installation effects or variable operating conditions and cannot be retracted for off-design or fail-safe conditions. Benefits include: Increased vehicle control, overall efficiency, and reduced noise throughout all f1ight regimes, Reduced flow noise, Reduced drag, Simplicity of design and fabrication, Simplicity of control through direct current stimulation, autonomous re sponse to environmental heating, fast re sponse, and a high degree of geometric stability. The concept involves embedding prestrained SMA actuators on one side of the chevron neutral axis in order to generate a thermal moment and def1ect the structure out of plane when heated. The force developed in the host structure during def1ection and the aerodynamic load is used for returning the structure to the retracted position. The chevron design is highly scalable and versatile, and easily affords active and/or autonomous (environmental) control. The technology offers wide-ranging market applications, including aerospace, automotive, and any application that requires flow separation or noise control.

Turner, Travis L.↗

Sweep and Compressibility Effects on Active Separation Control at High Reynolds Numbers

This paper explores the effects of compressibility, sweep and excitation location on active separation control at high Reynolds numbers. The model, which was tested in a cryogenic pressurized wind tunnel, simulates the upper surface of a 20% thick GlauertGoldschmied type airfoil at zero angle of attack. The flow is fully turbulent since the tunnel sidewall boundary layer flows over the model. Without control, the flow separates at the highly convex area and a large turbulent separation bubble is formed. Periodic excitation is applied to gradually eliminate the separation bubble. Two alternative blowing slot locations as well as the effect of compressibility, sweep and steady suction or blowing were studied. During the test the Reynolds numbers ranged from 2 to 40 million and Mach numbers ranged from 0.2 to 0.7. Sweep angles were 0 and 30 deg. It was found that excitation must be introduced slightly upstream of the separation region regardless of the sweep angle at low Mach number. Introduction of excitation upstream of the shock wave is more effective than at its foot. Compressibility reduces the ability of steady mass transfer and periodic excitation to control the separation bubble but excitation has an effect on the integral parameters, which is similar to that observed in low Mach numbers. The conventional swept flow scaling is valid for fully and even partially attached flow, but different scaling is required for the separated 3D flow. The effectiveness of the active control is not reduced by sweep. Detailed flow field dynamics are described in the accompanying paper.

Seifert, Avi↗

Vortex cloud model for body vortex shedding and tracking

The present engineering prediction method addresses the aerodynamic characteristics and associated flowfields of circular and noncircular bodies at large incidence angles and arbitrary roll angles. 3D attached-flow models are used to represent the body, and 2D, incompressible, separated flow models are used to represent the separated vortex wake. The predicted pressure distribution of the body, under the influence of both the freestream and the separation vortex wake, is used to calculate aerodynamic loads. The separation vortex wake is represented by clouds of discrete vortices in crossflow planes normal to the body axis.

Mendenhall, Michael R.↗

Viscous calculations of supersonic flows past cylinders at angles of attack

Two- and three-dimensional separated flows around cylindrical sections and a body-of-revolution at angles of attack from -10 deg to +20 deg are computed. The blunt-nose-cylinders chosen for the analyses have different configurations, and one of them has a boat-tail. The freestream Mach numbers are 1.5 and 1.6, the unit Reynolds number and the total temperature are 2 million/ft, and 585 R, respectively. Among the possible areas of application for this study are the aerodynamics of separating stores and missiles. The Reynolds-averaged Navier-Stokes equations are solved by an approximately-factored, implicit, upwind-biased, finite-volume algorithm. The convergence to steady state was accelerated using a multigrid strategy. The results helped understanding the structure of the flowfield with varying incidence and configuration, and the suitability of the computational algorithm used for this class of flows. A two-layer algebraic eddy viscosity model is used for the two-dimensional turbulent flows. Laminar three-dimensional calculations are benchmarked through comparisons with wind tunnel test results.

Baysal, O.↗

Sweep and Compressibility Effects on Active Separation Control at High Reynolds Numbers

This paper explores the effects of compressibility, sweep and excitation location on active separation control at high Reynolds numbers. The model, which was tested in a cryogenic pressurized wind tunnel, simulates the upper surface of a 20% thick Glauert Goldschmied type airfoil at zero angle of attack. The flow is fully turbulent since the tunnel sidewall boundary layer flows over the model. Without control, the flow separates at the highly convex area and a large turbulent separation bubble is formed. Periodic excitation is applied to gradually eliminate the separation bubble. Two alternative blowing slot locations as well as the effect of compressibility, sweep and steady suction or blowing were studied. During the test the Reynolds numbers ranged from 2 to 40 million and Mach numbers ranged from 0.2 to 0.7. Sweep angles were 0 and 30 deg. It was found that excitation must be introduced slightly upstream of the separation region regardless of the sweep angle at low Mach number. Introduction of excitation upstream of the shock wave is more effective than at its foot. Compressibility reduces the ability of steady mass transfer and periodic excitation to control the separation bubble but excitation has an effect on the integral parameters, which is similar to that observed in low Mach numbers. The conventional swept flow scaling is valid for fully and even partially attached flow, but different scaling is required for the separated 3D flow. The effectiveness of the active control is not reduced by sweep. Detailed flow field dynamics are described in the accompanying paper.

Seifert, Avi↗

Rotor design of high tip speed low loading transonic fan.

This paper describes the design concepts, principles and details of a high tip speed transonic rotor having low aerodynamic loading. The purpose of the NASA sponsored investigation was to determine whether good efficiency and large stall margin could be obtained by designing a rotor to avoid flow separation associated with strong normal shocks. Fully supersonic flow through the outboard region of the rotor with compression accomplished by weak oblique shocks were major design concepts employed. Computer programs were written and used to derive blade sections consistent from the all-supersonic tip region to the all-subsonic hub region. Preliminary test results indicate attainment of design pressure ratio and design flow at design speed with about a 1.6 point decrement in efficiency and large stall margin.

Erwin, J. R.↗

Performance and boundary-layer evaluation of a sonic inlet

Tests were conducted to determine the boundary layer characteristics and aerodynamic performance of a radial vane sonic inlet with a length/diameter ratio of 1 for several vane configurations. The sonic inlet was designed with a slight wavy wall type of diffuser geometry, which permits operation at high inlet Mach numbers (sufficiently high for good noise suppression) without boundary layer flow separation and with good total pressure recovery. A new method for evaluating the turbulent boundary layer was developed to separate the boundary layer from the inviscid core flow, which is characterized by a total pressure variation from hub to tip, and to determine the experimental boundary layer parameters.

Schmidt, J. F.↗

Experimental and predicted heating distributions for biconics at incidence in air at Mach 10

Heating distributions were measured on a 1.9-percent-scale model of a generic aeroassisted vehicle proposed for missions to a number of planets and for use as a moderate lift-drag ratio Earth orbital transfer vehicle. This vehicle is spherically blunted, 12.84 deg/7 deg biconic with the fore-cone bent upward 7 deg to provide self-trim capability. A straight biconic with the same nose radius and the same half-angles was also tested. The free-stream Reynolds numbers based on model length were equal to about 2 x 10(5) or 9 x 10 (5). The angle of attack, referenced to the aft-cone, was varied from 0 deg to 20 deg. Heating distributions predicted with a parabolized Navier-Stokes (PNS) code are compared with the measurements for the present Reynolds numbers and range of angles of attack. Leeward heating was greatly affected by Reynolds number, with the heating increasing with decreasing Reynolds number for attached flow (low incidence). The opposite was true for separated flow, which occurred when the fore-cone angle of attack exceeded 0.8 times the fore-cone half-angle. Windward heating distributions were predicted to within 10 percent with the PNS code. Leeward heating distributions were predicted qualitatively for both Reynolds numbers, but quantitative agreement was poorer than on the windward side.

Miller, C. G., III↗

On the flow processes in sharply inclined and stalled airfoils in parallel movement and rotation

The purpose of this study is to obtain a deeper insight into the complicated flow processes on airfoils in the region of the buoyancy maxima. To this end calculated and experimental investigations are carried out on a straight stationary, a twisted stationary and a straight rotating rectangular wing. According to the available results the method gives results which can be applied sufficiently for flow applied firmly on all sides for all rotation values. The reliability of the method may be questioned for a flow undergoing transition from the attached to the separated state or for totally separated flow and higher rotation values.

Kohler, M.↗

Simplex finite element analysis of viscous incompressible flow with penalty function formulation

Viscous flow calculations are important for the determination of separated flows, recirculating flows, secondary flows and so on. This paper presents a penalty function approach for the finite element analysis of steady incompressible viscous flow. A simplex element is used with linear velocity and constant pressure in contrast to other works which usually employ higher order elements. Simplex elements yield analytical expressions for the element matrices which in turn lead to efficient solutions. Earlier works have partially indicated how constraint and lock-up problems might be avoided for simplex elements. This paper extends the earlier works by indicating the approach in detail and verifying that it is successful for several applications not discussed in the literature so far. Solution times and accuracy considerations are discussed for Couette flow, plane Poiseuille flow, a driven cavity problem, and laminar and turbulent flow over a step.

Allaire, P. E.↗

Calculation of compressible boundary layer flow about airfoils by a finite element/finite difference method

Preliminary results are presented of a finite element/finite difference method (semidiscrete Galerkin method) used to calculate compressible boundary layer flow about airfoils, in which the group finite element scheme is applied to the Dorodnitsyn formulation of the boundary layer equations. The semidiscrete Galerkin (SDG) method promises to be fast, accurate and computationally efficient. The SDG method can also be applied to any smoothly connected airfoil shape without modification and possesses the potential capability of calculating boundary layer solutions beyond flow separation. Results are presented for low speed laminar flow past a circular cylinder and past a NACA 0012 airfoil at zero angle of attack at a Mach number of 0.5. Also shown are results for compressible flow past a flat plate for a Mach number range of 0 to 10 and results for incompressible turbulent flow past a flat plate. All numerical solutions assume an attached boundary layer.

Strong, Stuart L.↗