Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heterostructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Determination of Electron Temperature in DA-pHEMT Heterostructures by Shubnikov – de Haas Oscillation Method

The electron temperature of a two-dimensional electron gas heated by an electric field in DA-pHEMT heterostructures was determined by the Shubnikov – de Haas (SdH) oscillation method separately for each size-quantization subband. An analysis of the Fourier spectra of SdH oscillations showed that throughout the entire range of electron temperatures obtained, harmonics associated with different size-quantization subbands and transitions between the Landau levels of these subbands dominate in the spectra. To separate the SdH oscillations into individual harmonics, we used the approximation of the magnetic-field dependences of the oscillations by theoretical expressions using the ratio between the peak heights in the Fourier spectra. It is shown that this method allows one to determine the values of the electron temperature in case when the electron concentrations in the first and second subbands are close in magnitude. The obtained values of the electron temperature correspond to the literature data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced tunability of two-dimensional electron gas on SrTiO 3 through heterostructuring

Two-dimensional electron gases (2DEGs) on the SrTiO 3 (STO) surface or in STO-based heterostructures have exhibited many intriguing phenomena, which are strongly dependent on the 2DEG-carrier density. In this paper, we report that the tunability of the 2DEG-carrier density is significantly enhanced by adding a monolayer LaTiO 3 (LTO) onto the STO. Ultraviolet (UV) irradiation induced maximum carrier density of the 2DEG in LTO/STO is increased by a factor of ~4 times, compared to that of the bare STO. By oxygen gas exposure, it becomes 10 times smaller than that of the bare STO. This enhanced tunability is attributed to the drastic surface property change of a polar LTO layer by UV irradiation and O 2 exposure. This indicates that the 2DEG controllability in LTO/STO is more reliable than that on the bare STO driven by defects, such an oxygen vacancy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge carrier transport and separation in pristine and nitrogen-doped graphene nanowiggle heterostructures

Electronic structure methods are combined into a multiscale framework to investigate the electronic transport properties of recently synthesized pristine and nitrogen-doped graphene nanowiggles and their heterojunctions deposited on a substrate. The real-space Kubo-Greenwood transport calculations reveal that charge carrier mobilities reach values up to 1,000 cm 2 V –1 s –1 as long as the amount of substrate impurities is sufficiently low. Owing to their type-II band alignment, atomically precise heterostructures between pristine and N-doped graphene nanowiggles are predicted to be excellent candidates for charge carrier separation devices with potential in photoelectric and photocatalytic water splitting applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gold nanocatalysts supported on heterostructured PbSO4-MCF mesoporous materials for CO oxidation

Metal oxides are commonly used as the supports of gold nanoparticles for catalytic CO oxidation, whereas metal salts are rarely considered suitable supports. In the present work, we developed a new kind of gold nanocatalyst supported on heterostructured PbSO4-MCF mesoporous materials that was prepared by an in situ growth method using dodecylbenzenesulfonate (SOBS) as a sulfonate precursor. It was found that an Au/PbSO4-MCF (SDBS) catalyst preheated at 300 degrees C showed high CO conversion below 100 degrees C. In addition, the stability of selected catalysts was studied as a function of time on stream. Because of the alteration of surface properties, these Au nanocatalysts were highly sinter-resistant. Published by Elsevier B.V.

Li, Lin↗

Interfacial intermixing and anti-phase boundaries in GaP/Si(0 0 1) heterostructures

Epitaxial GaP/Si heterostructures grown by molecular beam epitaxy (MBE) and migration-enhanced epitaxy (MEE) have been studied, primarily using aberration-corrected scanning transmission electron microscopy (AC-STEM). Atomically-resolved structure images, which are sensitive to atomic-column intensity revealed the detailed geometry of antiphase boundaries that were both parallel and also inclined to the growth direction. The polar/non-polar GaP/Si interfaces were neither atomically flat laterally nor abrupt vertically. Measurements of intensity profiles using both bright-field and dark-field AC-STEM images, as well as chemically-sensitive g 002 dark-field imaging, indicated substantial interfacial intermixing, which increased significantly from ~1.3 nm (MEE growth at 440 °C) to ~2.1 nm (MBE growth at 600 °C). The finite interface width will impact theoretical predictions of charge imbalance and strong electric fields across the heterointerface.

36 MATERIALS SCIENCE↗

An epitaxial surface heterostructure anchoring approach for high-performance Ni-rich layered cathodes

Nickel-rich (Ni≥90%) layered oxides materials have emerged as a promising candidate for next-generation high-energy-density lithium-ion batteries (LIBs). However, their widespread application is hindered by structural fatigue and lattice oxygen loss. In this work, an epitaxial surface rock-salt nanolayer is successfully developed on the LiNi 0.9 Co 0.1 O 2 sub-surface via heteroatom anchoring utilizing high-valence element molybdenum modification. This in-situ formed conformal buffer phase with a thickness of 1.2nm effectively suppresses the continuous interphase side-reactions, and thus maintains the excellent structure integrity at high voltage. Furthermore, theoretical calculations indicate that the lattice oxygen reversibility in the anion framework of the optimized sample is obviously enhanced due to the higher content of O 2p states near the Fermi level than that of the pristine one. Meanwhile, the stronger Mo–O bond further reduces cell volume alteration, which improves the bulk structure stability of modified materials. Besides, the detailed charge compensation mechanism suggests that the average oxidation state of Ni is reduced, which induces more active Li + participating in the redox reactions, boosting the cell energy density. As a result, the uniquely designed cathode materials exhibit an extraordinary discharge capacity of 245.4 mAh g −1 at 0.1 C, remarkable rate performance of 169.3 mAh g −1 at 10 C at 4.5V, and a high capacity retention of 70.5% after 1000 cycles in full cells at a high cut-off voltage of 4.4V. Further, this strategy provides an valuable insight into constructing distinctive heterostructure on high-performance Ni-rich layered cathodes for LIBs.

25 ENERGY STORAGE↗

Surface magnetic anisotropy-mediated spin Hall magnetoresistance and spin Seebeck effects in a YIG/Pt heterostructure

The role of magnon-phonon coupling in the low-temperature behavior of the spin Seebeck effect (SSE) in YIG/Pt has been puzzling for more than a decade. Here, to elucidate the origin of the anomalous peak around 80 K, we investigate the temperature evolution of SSE, spin Hall magnetoresistance (SMR), and magnetic anisotropy in the same YIG/Pt heterostructure. We find that these effects, along with magnetic damping, show the peaks at the same temperature (~80 K). This simultaneous occurrence, where no heat is applied in the case of SMR, rules out the phonon-magnon drag related origin of SSE in the YIG/Pt system. We further show that the intrinsic surface anisotropy behavior in YIG is responsible for controlling the SSE, SMR, and magnetic damping in the YIG/Pt structure. Our findings not only help to understand these effects fundamentally but also provide an effective way for improving them by manipulating the surface magnetic anisotropy for spin caloritronic applications.

36 MATERIALS SCIENCE↗

Analysis of ultrafast magnetization switching dynamics in exchange-coupled ferromagnet–ferrimagnet heterostructures

Magnetization switching in ferromagnets has so far been limited to the current-induced spin–orbit–torque effects. Recent observation of helicity-independent all-optical magnetization switching (HI-AOS) in an exchange-coupled ferromagnet–ferrimagnet (FM-FEM) heterostructures expanded the range and applicability of such ultrafast heat-driven magnetization switching. Here we report the element-resolved HI-AOS dynamics of such an exchange-coupled system, using a modified microscopic three-temperature model. We have studied the effect of (i) the Curie temperature of the FM, (ii) FEM composition, (iii) the long-range Ruderman–Kittel–Kasuya–Yosida (RKKY) exchange-coupling strength, and (iv) the absorbed optical energy on the element-specific time-resolved magnetization dynamics. The phase-space of magnetization illustrates how the RKKY coupling strength and the absorbed optical energy influence the switching time. Our analysis demonstrates that the threshold switching energy depends on the composition of the FEM and the switching time depends on the Curie temperature of the FM as well as RKKY coupling strength. Importantly, this simulation anticipates new insights into developing faster and more energy-efficient spintronics devices.

36 MATERIALS SCIENCE↗

Fabrication and characterization of flower-like BiOI/Pt heterostructure with enhanced photocatalytic activity under visible light irradiation

Flower-like Pt/BiOI composite nanosheets were successfully constructed by a photo-reduction method. The nanosized Pt/BiOI composites exhibited considerably enhanced photocatalytic performance for rhodamine B (RhB) and phenol degradation under visible-light irradiation (λ > 420 nm) when compared with that of pure BiOI. Various characterization methods were used to evaluate the mechanism of enhanced photocatalytic activity. The highest photocatalytic activity was achieved when the composites had a Pt content of 3 wt%, which is 17.8 times and 9 times higher than that of pure BiOI, respectively. The enhanced catalytic efficiency was attributed to the low rate of recombination of electron-hole pairs. Superoxide radicals and holes were found to be crucial species during the photocatalytic degradation. A possible mechanism of photocatalysis was also proposed based on the results of experiments. - Highlights: • Flower-like BiOI/Pt heterostructure are synthesized by a two step method. • The photocatalytic performance of as prepared samples are carried out under visible light irradiation. • The mechanism for the catalyst activity is discussed in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependent photoluminescence investigation of the effect of growth pause induced ripening in InAs/GaAs quantum dot heterostructures

Highlights: Black-Right-Pointing-Pointer Self-assembled InAs/GaAs quantum dots were subjected to growth ripening pause. Black-Right-Pointing-Pointer Samples are structurally and optically characterized. Black-Right-Pointing-Pointer Factors affecting the carrier activation energy have been investigated. -- Abstract: Self-assembled InAs/GaAs quantum dot (QD) heterostructures grown by solid state molecular beam epitaxy (MBE) were subjected to growth ripening pause of comparatively shorter durations (0-50 s) at the growth temperature (520 Degree-Sign C). The islands are found to increase in size with the growth pause and correspondingly their density decreases. Though the photoluminescence spectra of the islands subjected to growth pause is found to follow conventional QD systems, a contradiction is noticed in the calculated values of the activation energy of the dots. We ascribed this contradiction due to the poor crystalline quality of the ripened QDs as a result of desorption and sublimation of indium during the pause at high growth temperature.

36 MATERIALS SCIENCE↗

Synthesis of heterostructured Pd@TiO{sub 2}/TiOF{sub 2} nanohybrids with enhanced photocatalytic performance

Highlights: • TiO{sub 2}/TiOF{sub 2} nanohybrids was synthesized via a two-step solvothermal method. • TiO{sub 2}/TiOF{sub 2} exhibited superior photoactivity in comparison with TiOF{sub 2} or TiO{sub 2}. • The photocatalytic activity was further improved by loading Pd nanoparticles. • Synergistic effect between TiOF{sub 2} and TiO{sub 2} was responsible for the enhanced photocatalytic performance over TiO{sub 2}/TiOF{sub 2}. - Abstract: TiO{sub 2}/TiOF{sub 2} heterostructured nanocomposites has been synthesized through a solvothermal method and characterized by X-ray diffraction, scanning electronic microscopy, transmission electronic microscopy, nitrogen adsorption–desorption isotherms, UV–vis and photo-luminescent spectroscopy. It was found that, compared with single TiOF{sub 2} or TiO{sub 2}, the as-prepared TiO{sub 2}/TiOF{sub 2} nanocomposites exhibited superior photoactivity towards the degradation of organic pollutants, i.e. rhodamine B and solar hydrogen evolution. The results are in accordance with the prohibition of photogenerated electrons and holes recombination in these two samples under light illumination. The photocatalytic activity can be further boosted by introducing Pd nanoparticles onto the surfaces of TiO{sub 2}/TiOF{sub 2} through a simple deposition method without using any stabilizers, which is probably attributed to the enhanced visible-light absorption as well as the facilitated charge-carrier separation after the introduction of Pd nanoparticles. The synergistic effect between TiOF{sub 2} and TiO{sub 2} was discussed and was responsible for the enhancement of their activity in comparison with single counterpart.

36 MATERIALS SCIENCE↗

Hydrothermally synthesized ternary heterostructured MoS{sub 2}/Al{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} photocatalyst

Highlights: • Surfactant-free synthetic method for synthesis of MoS{sub 2}/Al{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} was proposed. • The optimized synthetic conditions for MoS{sub 2}/Al{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} nanocomposites were also investigated. • Possible growth mechanism of the MoS{sub 2}/Al{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} heterostructure is also reported. • 2Mo-Al-gCN sample revealed higher specific surface area with formation of mesoporous structure. - Abstract: A multifaceted ternary MoS{sub 2}/Al{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} nanocomposite was prepared from a simple and facile hydrothermal method, which has good photocatalytic performance for the degradation of crystal violet (CV) dye under visible light irradiation. As a result of wide structural features for the charge separation mechanism, the formation of a ternary heterojunction affects the photocatalytic activity of the MoS{sub 2}/Al{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} nanocomposite remarkably. The photocatalytic activity of ternary nanocomposite was approximately 10.28 and 1.65 times higher than that of pure g-C{sub 3}N{sub 4} and 20Al-gCN, respectively. More significantly, the ternary nanocomposite also showed good photostability and reusability. The enhanced visible light photocatalytic activity was attributed to the effective photocatalytic mechanism of charge separation of the ternary system, whereas the surface properties were key factors for photodegradation of the CV dye.

36 MATERIALS SCIENCE↗

Probing interfacial energetics and charge transfer kinetics in semiconductor nanocomposites: New insights into heterostructured TiO 2 /BiVO 4 photoanodes

Heterostructured nanocomposites offer promise for creating systems exhibiting functional properties that exceed those of the isolated components. For solar energy conversion, such combinations of semiconducting nanomaterials can be used to direct charge transfer along pathways that reduce recombination and promote efficient charge extraction. However, interfacial energetics and associated kinetic pathways often differ significantly from predictions derived from the characteristics of pure component materials, particularly at the nanoscale. Here, the emergent properties of TiO 2 /BiVO 4 nanocomposite photoanodes are explored using a combination of X-ray and optical spectroscopies, together with photoelectrochemical (PEC) characterization. Application of these methods to both the pure components and the fully assembled nanocomposites reveals unpredicted interfacial energetic alignment, which promotes ultrafast injection of electrons from BiVO 4 into TiO 2 . Physical charge separation yields extremely long-lived photoexcited states and correspondingly enhanced photoelectrochemical functionality. This work highlights the importance of probing emergent interfacial energetic alignment and kinetic processes for understanding mechanisms of solar energy conversion in complex nanocomposites.

36 MATERIALS SCIENCE↗

Extended defects in GaAs/GaAs 1-x Sb x /GaAs (001) heterostructures

The atomic-scale structure of extended defects in GaAs/GaAs 1-x Sb x /GaAs (001) heterostructures has been characterized using aberration-corrected scanning transmission electron microscopy. The defect located at the tensile-strained GaAs(cap)/GaAs 0.34 Sb 0.66 interface had no edge component in the projection plane and is identified as either a dissociated screw dislocation or a partial dislocation dipole. The associated intrinsic stacking fault is bounded by two 30° Shockley partial dislocations of opposite sign. Another defect, located at the compressively-strained GaAs 0.91 Sb 0.09 /GaAs(substrate) interface, is identified as a dissociated 90° dislocation. The associated intrinsic stacking fault is bounded by a 30° Shockley partial dislocation and a partial dislocation with a Burgers vector of either or , where a is the lattice constant. Unpaired atomic columns observed at the cores of the 30° Shockley partial dislocations indicate that both defects belong primarily to the glide set.

36 MATERIALS SCIENCE↗

X-ray photoelectron spectroscopy of epitaxial films and heterostructures

X-ray photoelectron spectroscopy is a powerful experimental technique that yields invaluable information on a range of phenomena that occur in solids, liquids, and gasses. The binding energy and shape of a photoemission peak is sensitive not only to the atomic number, valence and orbital from which the electron is ejected, but also to complex many-body effects that accompany photoemission. Provided the influences of these different drivers of spectral line shapes can be disentangled, a great deal can be learned about the electronic structures of specific atoms in the material of interest. In addition to these largely local effects, the long-range electrostatic environment and resulting electric potential at the emitting atom have a direct effect on the measured binding energies. Furthermore, this fact opens the door to extracting information about the dependence of the valence and conduction band minima on depth below the surface, which in turn allows both vertical and lateral electrical transport data to be better understood. One purpose of this Report is to describe how the different physical forces described above impact spectral properties of complex oxide epitaxial films. This class of materials typically incorporates transition metal cations in different valences and of all the elements, these exhibit the most complex core-level spectra. A second purpose is to show how a comprehensive understanding of local physical effects in x-ray photoemission allows one to extract detailed information on internal electric fields and band edge discontinuities in heterostructures involving complex oxides from core-level line shapes.

47 OTHER INSTRUMENTATION↗

Quasi-Two-Dimensional Heterostructures (K M 1 – x Te)(LaTe 3 ) ( M = Mn and Zn) with Charge Density Waves

Layered heterostructure materials with two different functional building blocks can teach us about emergent physical properties and phenomena arising from interactions between the layers. Here, we report intergrowth compounds KLaM 1 - x Te 4 (M = Mn and Zn; $x \approx$ 0.35) featuring two chemically distinct alternating layers [LaTe 3 ] and [KM 1 - x Te]. Their crystal structures are incommensurate, determined by single X-ray diffraction for the Mn compound and a transmission electron microscope study for the Zn compound. KLaMn 1 – x Te 4 crystallizes in the orthorhombic superspace group Pmnm(01/2 gamma)s00 with lattice parameters a = 4.4815(3) Å, b = 21.6649(16) Å, and c = 4.5220(3) Å. It exhibits charge density wave order at room temperature with a modulation wave vector q = 1/2b* + 0.3478c* originating from electronic instability of Te-square nets in [LaTe 3 ] layers. The Mn analog exhibits a cluster spin glass behavior with spin freezing temperature $T_f \approx$ 5 K attributed to disordered Mn vacancies and competing magnetic interactions in the [Mn 1 - x Te] layers. The Zn analog also has charge density wave order at room temperature with a similar q-vector having the c* component similar to 0.346 confirmed by selected-area electron diffraction. Electron transfer from [KM 1 - x Te] to [LaTe 3 ] layers exists in KLaM 1 – x Te 4 , leading to an enhanced electronic specific heat coefficient. The resistivities of KLaM 1 - x Te 4 (M = Mn and Zn) exhibit metallic behavior at high temperatures and an upturn at low temperatures, suggesting partial localization of carriers in the [LaTe 3 ] layers with some degree of disorder associated with the M atom vacancies in the [M 1 - x Te] layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupling-Assisted Renormalization of Excitons and Vibrations in Compressed MoSe 2 –WSe 2 Heterostructure

Vertical heterostructures (HSs) constructed with two-dimensional (2D) materials is expected to generate fascinating properties due to interlayer coupling between neighboring layers. However, interlayer coupling can be easily obscured by cross-contamination during transfer processes, rendering their experimental demonstration challenging. Here, we explore the coupling-assisted renormalization of excitons and vibrations in a mechanically fabricated MoSe 2 –WSe 2 HS through high-pressure photoluminescence, Raman spectra, and density functional theory calculations. Accompanied by the interlayer coupling enhancement, the excitonic and vibrational renormalizations involving dimensionality and composition variations were achieved. A cycle of 2D–3D–2D excitonic evolution was disclosed and pressure-induced emergence of X – exciton of MoSe 2 in HS was found reflecting the band structure transition in the MoSe 2 –WSe 2 HS. The Raman spectra reveals that the coupled A 2 " vibrations of WSe 2 and MoSe 2 in HS was stiffened and out-of-plane A 1 ' vibrations of WSe 2 and MoSe 2 in HS got coherent upon pressure modulation. Here, this coupling-assisted renormalization in MoSe 2 –WSe 2 HS can be extended to other 2D layered HSs, which indicates the possibility to design a flexible HS with controlled excitonic and vibrational system for light-emitting diodes, excitonic, and photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Breaking of Inversion Symmetry and Interlayer Electronic Coupling in Bilayer Graphene Heterostructure by Structural Implementation of High Electric Displacement Fields

Controlling the interlayer coupling in two-dimensional (2D) materials generates novel electronic and topological phases. Its effective implementation is commonly done with a transverse electric field. However, phases generated by high displacement fields are elusive in this standard approach. Here, we introduce an exceptionally large displacement field by structural modification of a model system: AB-stacked bilayer graphene (BLG) on a SiC(0001) surface. We show that upon intercalation of gadolinium, electronic states in the top graphene layers exhibit a significant difference in the on-site potential energy, which effectively breaks the interlayer coupling between them. As a result, for energies close to the corresponding Dirac points, the BLG system behaves like two electronically isolated single graphene layers. This is proven by local scanning tunneling microscopy (STM)/spectroscopy, corroborated by density functional theory, tight binding, and multiprobe STM transport. Further, the work presents metal intercalation as a promising approach for the synthesis of 2D graphene heterostructures with electronic phases generated by giant displacement fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗