Search NASA⌕ Search

SEARCH · Search NASA

Results for “Infrared techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Fourier Transform Fabry-Perot Interferometer

We are developing a compact, rugged, high-resolution remote sensing instrument with wide spectral scanning capabilities. This relatively new type of instrument, which we have chosen to call the Fourier-Transform Fabry-Perot Interferometer (FT-FPI), is accomplished by mechanically scanning the etalon plates of a Fabry-Perot interferometer (FPI) through a large optical distance while examining the concomitant signal with a Fourier-transform analysis technique similar to that employed by the Michelson interferometer. The FT-FPI will be used initially as a ground-based instrument to study near-infrared atmospheric absorption lines of trace gases using the techniques of solar absorption spectroscopy. Future plans include modifications to allow for measurements of trace gases in the stratosphere using spectral lines at terahertz frequencies.

Snell, Hilary E.↗

Where Do Obscured AGN Fit in a Galaxy’s Timeline?

Many X-ray bright active galactic nuclei (AGNs) are predicted to follow an extended stage of obscured black hole growth. In support of this picture we examine the X-ray undetected AGNs in the COSMOS field and compare their host galaxies with X-ray bright AGNs. We examine galaxies with M {sub *} > 10{sup 9.5} M {sub ⊙} for the presence of AGNs at redshifts z = 0.5–3. We select AGNs in the infrared using Spitzer and Herschel detections and use color selection techniques to select AGNs within strongly star-forming hosts. We stack Chandra X-ray data of galaxies with an infrared (IR) detection but lacking an X-ray detection to obtain soft and hard fluxes, allowing us to measure the energetics of these AGNs. We find a clear correlation between X-ray luminosity and IR AGN luminosity in the stacked galaxies. We also find that X-ray undetected AGNs all lie on the main sequence—the tight correlation between the star formation rate and M {sub *} that holds for the majority of galaxies, regardless of mass or redshift. This work demonstrates that there is a higher population of obscured AGNs than previously thought.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ionizing radiation induced degradation of poly (2-methoxy-5-(2'-ethyl-hexyloxy) -1,4-phenylene vinylene) in solution

In this paper we investigate the causes of the chromatic alteration observed in chloroform solutions of poly (2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) after gamma ray irradiation. Structural and chemical changes were analyzed by gel permeation chromatography, fourier transform infrared spectroscopy, and proton nuclear magnetic resonance techniques and complemented by electronic structure calculations. The results indicate chlorine incorporation in the polymer structure and main chain scission after irradiation. Based on our findings we propose that the main mechanism for the blue-shifts, observed in the UV-Vis absorption spectra of MEH-PPV after irradiation, is the result of a radical attack on the polymer main chain. Gamma rays generate radicals, Cl and CHCl{sub 2} from chloroform radiolysis that attack preferentially the vinyl double bonds of the polymer backbone, breaking the electronic conjugation and eventually the chain. Our results indicate that oxygen does not play a major role in the effect. Electronic spectra simulations were performed based on these assumptions reproducing the UV-Vis experimental results.

36 MATERIALS SCIENCE↗

Molecular water adsorption and reactions on (alpha)-Al2O3(0001) and (alpha)-Alumina Particles

The adsorption and reaction of water on single crystal, -Al2O3(0001) in ultrahigh vacuum, and -alumina particles in ambient conditions, was investigated using temperature programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS), diffuse reflectance infrared Fourier transform spectra (DRIFTS) and other surface science techniques. For a water coverage of 1 H2O/(surface Al3+) on -Al¬2O3(0001), no evidence for the surface hydroxyls expected from dissociative adsorption was observed in the infrared spectra, while the 2 vibration of molecular water was observed. Electron-stimulated desorption of molecular water at low coverages also indicated molecular or mixed (molecular plus dissociative) adsorption. Analysis of Kr TPD spectra showed that the water films wet the alumina substrate and suggested that the films were initially growing layer-by-layer. In contrast with the single crystal results, DRIFTS of water adsorption on alumina particles indicated the presence of surface hydroxyls that persist even after annealing to high temperatures in oxygen. For water on -Al2O3(0001) at coverages less than 0.3 H2O/(surface Al3+), water desorbed over a broad temperature range extending from ~250 K to 700 K. For larger coverages, water desorption occurred at temperatures between ~160 K and 250 K, consistent with desorption of molecular water. The results, which are consistent with at most a small amount of water dissociation on the Al-terminated (0001) surface, are difficult to reconcile with calculations suggesting that the barrier to dissociation is small. However, the results are consistent with recent vibrational sum frequency experiments showing that the hydroxylation of the Al-terminated (0001) surface takes many days even at ambient pressures and temperatures.

Petrik, Nikolay G.↗

A BAYESIAN APPROACH TO DERIVING AGES OF INDIVIDUAL FIELD WHITE DWARFS

We apply a self-consistent and robust Bayesian statistical approach to determine the ages, distances, and zero-age main sequence (ZAMS) masses of 28 field DA white dwarfs (WDs) with ages of approximately 4-8 Gyr. Our technique requires only quality optical and near-infrared photometry to derive ages with <15% uncertainties, generally with little sensitivity to our choice of modern initial-final mass relation. We find that age, distance, and ZAMS mass are correlated in a manner that is too complex to be captured by traditional error propagation techniques. We further find that the posterior distributions of age are often asymmetric, indicating that the standard approach to deriving WD ages can yield misleading results.

79 ASTRONOMY AND ASTROPHYSICS↗

Study of Organosilicon Plasma Polymer Used in Composite Layers with Biomedical Application

In this work we study the ability of plasma polymer (PP) films obtained from hexamethyldisiloxane (HMDS) on silica glass (SG) to induce hydroxyapatite (HA)-based composite layers from a mixture of simulated body fluid (SBF) and clear solution of detonation nanodiamond (DND) by a biomimetic process. The grown composites (PPHMDS/HADND) were studied by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and Rutherford backscattering (RBS) techniques. FTIR spectra of the PPHMDS indicated diminishing of the polymer characteristic bands when the polymer is immersed in DND clear solution. Furthermore, after sample immersion in the SBF-DND mixture, the FTIR spectra showed the presence of carbonate-containing HA through the characteristic vibration modes of P-O in the phosphate group and C-O in the carbonate group. The formation of HA layers, rich in silica and/or carbon was confirmed by RBS and SEM. The cell viability measured after 7 days on the polymer surface is more then 95% for all samples. The results show that the PPHMDS is promising as a substrate for growing HA/DND layers and that the materials obtained are biocompatible. The variations of plasma polymerization conditions and modification of the composite layers will aid in using such materials for biomedical applications.

36 MATERIALS SCIENCE↗

Fixed-Angle Reflectance from Uranium Compounds and U-Bearing Minerals: Experimental Challenges to Determine the Optical Constants n and k

Fixed-angle reflectance spectroscopy using a commercial Fourier transform infrared (FTIR) spectrometer was employed to derive the optical constants n and k of several uranium compounds. This technique relies upon measurement of the quantitative reflectance R(?) spectra from a polished surface across a broad spectral range (in this case, the mid- and far-IR covering ca. 7500 to 50 cm-1) followed by application of the Kramers-Kronig transformation (KKT). Near-normal fixed-angle measurements as used in this technique require continuous reflectance spectra to as low a wavenumber value as possible. Here, we discuss some of the many challenges in measuring the far-IR and very far-IR (terahertz) spectra using an interferometric instrument, particularly those stemming from small sample sizes, typically just millimeters on a face for crystalline samples, as well as limitations due to optical components and diffraction. We apply this method to single-crystal UO2 and its mineralogical form uraninite, as well as other U-bearing minerals such as autunite [Ca(UO2)2(PO4)2·8-12H2O] and the dehydrated form of autunite, meta-autunite. In addition to the specular reflectance spectra, x-ray diffractometry was used as a confirmatory technique to analyze the surface composition of the species. Deriving the infrared optical constants for such U-bearing species (as well as other solids) will enable nondestructive detection under a variety of environmental and compositional conditions.

Uranium Minerals, infrared spectroscopy, optical c↗

Luminous red galaxies: selection and classification by combining optical and infrared photometry

We describe a new method of combining optical and infrared photometry to select luminous red galaxies (LRGs) at redshifts z>0.6. We explore this technique using a combination of optical photometry from CFHTLS and Hubble Space Telescope, infrared photometry from the Wide-Field Infrared Survey Explorer satellite, and spectroscopic or photometric redshifts from the DEEP2 Galaxy Redshift Survey or COSMOS. We present a variety of methods for testing the success of our selection and present methods for optimization given a set of rest-frame color and redshift requirements. We have tested this selection in two different regions of the sky, the COSMOS and Extended Groth Strip (EGS) fields, to reduce the effect of cosmic/sample variance. We have used these methods to assemble large samples of LRGs for two different ancillary programs as a part of the Sloan Digital Sky Survey (SDSS)-III/Baryon Oscillation Spectroscopic Survey. This technique is now being used to select ∼600,000 LRG targets for SDSS-IV/Extended Baryon Oscillation Spectroscopic Survey, which began observations in Fall 2014, and will be adapted for the proposed Dark Energy Spectroscopic Instrument survey. We have found that these methods can select high-redshift LRGs efficiently with minimal stellar contamination; this is extremely difficult to achieve with selections that rely on optical photometry alone.

79 ASTRONOMY AND ASTROPHYSICS↗

A multispectral cloud type identification method developed for tropical ocean areas with Nimbus-3 MRIR measurements

A four-channel multispectral cloud type identification technique is developed on the basis of Nimbus-3 Resolution Infrared Radiometer (MRIR) measurements, with the four channels being spectrally located at 0.2-4.0, 6.5-7, 10-11, and 20-23 microns. The technique requires the use of a radiative transfer model with information on the vertical temperature and moisture profiles and climatological knowledge of the upper boundaries of cloud surfaces associated with expected cloud types within a given area. Experimental verification of the technique indicates that deletion of the 20-23 micron channel has no adverse effect on method capability, and that the 6.5-7 micron channel alone is well suited for successful mapping of the areas where cirrus is reasonably dense, while indicating the regions where cirrus is not present.

Shenk, W. E.↗

Application of stepwise multiple regression techniques to inversion of Nimbus 'IRIS' observations.

Exploratory studies with Nimbus-3 infrared interferometer-spectrometer (IRIS) data indicate that, in addition to temperature, such meteorological parameters as geopotential heights of pressure surfaces, tropopause pressure, and tropopause temperature can be inferred from the observed spectra with the use of simple regression equations. The technique of screening the IRIS spectral data by means of stepwise regression to obtain the best radiation predictors of meteorological parameters is validated. The simplicity of application of the technique and the simplicity of the derived linear regression equations - which contain only a few terms - suggest usefulness for this approach. Based upon the results obtained, suggestions are made for further development and exploitation of the stepwise regression analysis technique.

Ohring, G.↗

Pixon deconvolution of far-infrared images from the UT multichannel photometer

Experiments with Pixon-based image deconvolution demonstrate that this technique can significantly enhance the spatial resolution of two-dimensional images acquired by the UT multichannel far-infrared photometer. A deconvolved 100 micron image of the giant HII region NGC 3603 reveals a bright, asymmetrical central peak some 40 x 55 arcsec in size, possibly surrounded by several secondary peaks. The results using the pixon technique are compared with those obtained using the standard Maximum Entropy and Richardson-Lucy methods.

Koresko, Chris D.↗

Space Weathering Maps of (101955) Bennu Using a Radiative Transfer Model

Space weathering is an important process that affects the surfaces of airless bodies, such as (101955) Bennu. The consequences of this process include physical and chemical changes to materials on the surface, which in turn change spectral characteristics, especially in the visible to near infrared wavelengths. These spectral changes are not the same across airless bodies because the changes are dependent on the composition and mineralogy of the surface and even location within the Solar System. The main space weathering products responsible for these spectral changes are submicroscopic particles, which consist of two types, nanophase and microphase particles, and affect visible to near-infrared reflectance spectra differently. Nanophase particles are particles <33 nm in size and occur in agglutinates and within glassy patinas around regolith particles. In contrast, microphase particles are >33 nm in size and are present only within agglutinates. These spectral differences are best illustrated by lunar samples. In lunar soils, the nanophase and microphase particles consist of metallic iron. With increasing abundance of nanophase iron particles in a regolith, its spectrum exhibits a lower overall reflectance in the visible to near infrared, weakened absorption bands, and a reddened continuum slope. In contrast, an increasing abundance of microphase iron only causes decreases in reflectance and not reddening. Because of the spectral differences introduced by these two types of particles, it is possible to model the nanophase and microphase particle abundances of a surface through the radiative transfer technique. Beyond the Moon, the composition of the nanophase and microphase particles can include other phases because the mineralogy of the surfaces of other planetary bodies is different. For example, the nanophase and microphase particles may consist of amorphous carbon (Mercury) and sulfides (Itokawa). The mineralogy of Bennu is consistent with carbonaceous chondrites. From a number of space weathering experiments on CM chondrites, the likely nanophase and microphase mineral phases on Bennu includes iron, magnetite, and sulfides (i.e., pentlandite and troilite). The goal of this work is to input the predicted nanophase and microphase compositions for Bennu into the radiative transfer technique. Next, we use this technique to model the OSIRIS-REx Visible Infrared Spectrometer (OVIRS) so that we can model the nanophase and microphase particle abundances across the surface. This will result in space weathering maps of the surface of Bennu, which are useful for understanding the degree of space weathering across the surface and its relationship to various regions and geological features.

Trang, D.↗

Long-term Black Carbon Dynamics in Cultivated Soil

Black carbon (BC) is a quantitatively important C pool in the global carbon cycle due to its relative recalcitrance against decay compared with other C pools. However, how rapidly BC is oxidized and in what way the molecular structure changes during decomposition over decadal time scales, is largely unknown. In the present study, the long-term dynamics in quality and quantity of BC were investigated in cultivated soil using X-ray Photoelectron Spectroscopy (XPS), Fourier-Transform Infrared (FTIR) and Nuclear Magnetic Resonance (NMR) techniques. BC particles, obtained from soil samples at 8 conversion ages stretching over 100 years and from a forest soil sample from Kenya, were manually picked under a light microscope for characterization and quantification. BC contents rapidly decreased from 12.7 to 3.8 mg C g⁻¹ soil during the first 30 years since conversion, after which they slowly decreased to a steady state at 3.51 mg C g ⁻¹soil. BC-derived C losses over 100 years were estimated at 6000 kg C ha⁻¹ to a depth of 0.1 m. The initial rapid changes in BC stocks resulted in a mean residence time of only around 8.3 years, which was likely a function of both decomposition as well as transport processes. The molecular properties of BC changed more rapidly on surfaces than in the interior of BC particles and more rapidly during the first 30 years than during the following 70 years. The Oc/C ratios (Oc is O bound to C) and carbonyl groups (C=O) increased over time by 133 and 192 %, respectively, indicating oxidation was an important degradation process controlling BC quality. Al, Si, polysaccharides, and to a lesser extent Fe were rapidly adsorbed on BC particle surfaces within the first few years after BC deposition to soil. The protection by physical and chemical stabilization was apparently sufficient to not only minimize decomposition below detection between 30 and 100 years after deposition, but also physical export by erosion and vertical transport below 0.1 m.

54 ENVIRONMENTAL SCIENCES↗

Control of optical absorption and fluorescence spectroscopies of natural melanin at different solution concentrations

The source of the optical properties of natural melanin persists as an impressive conundrum, hindering a thorough comprehension of the complicated photo-protective contribution of these extensive natural pigments and the pragmatic design of revolutionary bioinspired materials for optoelectronic functionalities. Melanin is a natural pigment distributed in vivo, and provides protection from the sun rays, exhibiting a strong wide-band UV–visible absorption. In the present study, we investigated the optical properties of natural melanin at different pH concentrations within the framework of experimental techniques, namely, UV–visible absorption, Fourier transform infrared spectroscopy (FTIR), and fluorescence spectroscopies. The results indicate that the optical absorption and fluorescence of natural melanin are enhanced within the near-UV and visible regimes with an increase in the solution concentration, are dependent on the pH level, and can impact the emergence of a broad band of visible absorption. The variations in the optical absorption spectra of natural melanin solutions at various pH levels will demonstrate novel rational strategies for controlling their optical properties for potential optoelectronic applications.

60 APPLIED LIFE SCIENCES↗

Porous Microcapsule-Based Regenerating Superhydrophobic Coating on 304L SS and Its Corrosion Properties

We report fabrication of a regenerating superhydrophobic coating on 304L stainless steels, with superior corrosion resistance, using porous microcapsules made of calcium hydroxide as a core and a polymeric shell consisting of ethyl cellulose and poly methyl methacrylate. The synthesized microcapsules are characterized using optical, atomic force and scanning electron microscopic techniques, x-ray diffraction, Fourier transform infrared spectroscopy and immersion tests. The diameter of porous and permeable microcapsules ranges from 2 to 20 μm. On immersion of the coated surface in sodium stearate solution, the calcium hydroxide from the core diffuses through the pores of microcapsules and forms nanocrystalline hydrophobic calcium stearate needles pointing outward that repel water molecules. The maximum water contact angle obtained was 155.7° ± 2.05°. The micro-nanoscale roughness of the surface was evident from the AFM measurement. The cross-hatch tape adhesion test confirmed the strong adherence of the superhydrophobic coating. On damage of the superhydrophobic coating, the regeneration is achieved by immersing it in sodium stearate solution for 6 h where a 10° increase in contact angle is observed. Electrochemical studies in 0.1 M NaCl showed significant decrease in the passive current density and a delayed pitting, confirming better corrosion resistance of the coating in chloride environment.

36 MATERIALS SCIENCE↗

The kinetic study of excited singlet oxygen atom O( 1 D) reactions with acetylene

Understanding the multi-channel dynamics of O( 1 D) reactions with unsaturated hydrocarbon molecules in low temperature reaction kinetics is critically important in stratospheric chemistry, plasma chemistry, plasma assisted fuel reforming, materials synthesis, and plasma assisted combustion. A photolysis flow reactor coupled with highly selective mid-infrared Faraday Rotation Spectroscopy (FRS) and direct ultraviolet-infrared (UV-IR) absorption spectroscopy (DAS) techniques was developed for the first time to study the multi-channel dynamics of excited singlet oxygen atom O( 1 D) reactions with C 2 H 2 and the kinetics of subsequent reactions. Time-resolved species concentrations of OH, HO 2 and H 2 O were obtained and used to develop a validated kinetic model of O(1D) reactions with C 2 H 2 . The branching ratios of O( 1 D) reaction with C 2 H 2 and subsequent HO 2 kinetics were also quantified. It is found that, contrary to O( 1 D) reactions with saturated alkanes, OH formation via direct H abstraction by O( 1 D) is negligible. The results revealed that two chain-branching and propagation reactions via direct O( 1 D) insertion are the major pathways for radical production. The present study clearly demonstrated the advantage of radical detection and kinetic studies using FRS in the effective suppression of absorption interference from non-paramagnetic hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methanol Decomposition on Copper Surfaces under Ambient Conditions: Mechanism, Surface Kinetics, and Structure Sensitivity

Here, we study the adsorption of methanol vapor under ambient pressure and temperature conditions on low-index Cu surfaces using surface-sensitive infrared (IR) and X-ray spectroscopy techniques. The first step of methanol decomposition, i.e. , breaking of the O—H bond to form surface-bound methoxy, readily occurs under ambient conditions. Time-lapse IR spectra clearly indicate a gradually decreasing methoxy coverage, which does not obey well established kinetic models. We rationalize the initial temperature-independent, high, nonequilibrium coverage of methoxy by a H-bonded methanol assembly in the precursor state. A temperature-dependent equilibrium coverage is achieved as the excess methoxy is eliminated gradually via further dehydrogenation to CO that desorbs to the gas phase. The kinetics of this process displays a significant structure sensitivity with considerably faster kinetics on the Cu(110) surface compared to Cu(111) and Cu(100) surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cellulose Microfibril Formation by Surface-Tethered Cellulose Synthase Enzymes

Cellulose microfibrils are pseudocrystalline arrays of cellulose chains that are synthesized by cellulose synthases. The enzymes are organized into large membrane-embedded complexes in which each enzyme likely synthesizes and secretes a β-(1→4) glucan. The relationship between the organization of the enzymes in these complexes and cellulose crystallization has not been explored. To better understand this relationship, we used atomic force microscopy to visualize cellulose microfibril formation from nickel-film-immobilized bacterial cellulose synthase enzymes (BcsA-Bs), which in standard solution only form amorphous cellulose from monomeric BcsA-B complexes. Fourier transform infrared spectroscopy and X-ray diffraction techniques show that surface-tethered BcsA-Bs synthesize highly crystalline cellulose II in the presence of UDP-Glc, the allosteric activator cyclic-di-GMP, as well as magnesium. The cellulose II cross section/diameter and the crystal size and crystallinity depend on the surface density of tethered enzymes as well as the overall concentration of substrates. Furthermore, our results provide the correlation between cellulose microfibril formation and the spatial organization of cellulose synthases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗