Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

High-efficiency micro-energy generation based on free-carrier-modulated ZnO:N piezoelectric thin films

The free-carrier-modulated ZnO:N thin film-based flexible nanogenerators (NZTF-FNGs) are proposed and experimentally demonstrated. The suggested flexible nanogenerators (FNGs) are fabricated using N-doped ZnO thin films (NZTFs) as their piezoelectric active elements, which are deposited by a radio frequency magnetron sputtering technique with an N{sub 2}O reactive gas as an in situ dopant source. Considerable numbers of N atoms are uniformly incorporated into NZTFs overall during their growth, which would enable them to significantly compensate the unintentional background free electron carriers both in the bulk and at the surface of ZnO thin films (ZTFs). This N-doping approach is found to remarkably enhance the performance of NZTF-FNGs, which shows output voltages that are almost two orders of magnitude higher than those of the conventionally grown ZnO thin film-based FNGs. This is believed to be a result of both substantial screening effect suppression in the ZTF bulk and more reliable Schottky barrier formation at the ZTF interfaces, which is all mainly caused by the N-compensatory doping process. Furthermore, the NZTF-FNGs fabricated are verified via charging tests to be suitable for micro-energy harvesting devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical, Mechanical, and Thermal Properties of Free-Standing MoSi{sub 2}N{sub x} and ZrSi{sub 2}N{sub y} Nanocomposite Films

The optical, mechanical, and thermal properties of free-standing structures based on nitrided molybdenum and zirconium silicides have been studied. It has been shown that silicide nitriding considerably improves the thermal stability of films. While as-prepared amorphous MoSi{sub 2} and ZrSi{sub 2} films crystallize in the interval 330–370°C, nitriding of films has made it possible to increase their working temperatures in vacuum to 600–700°C (at least, for x ≥ 0.25, y ≥ 1.3). Tensile tests have shown that the ultimate strength of MoSi{sub 2}N{sub x} films (0 ≤ x ≤ 0.55) depends on nitrogen content only slightly. Comparison between the properties of MoSi{sub 2}N{sub x} and ZrSi{sub 2}N{sub y} films magnetron-sputtered at the same partial pressure of nitrogen has demonstrated that with transmission coefficients of films at a wavelength of 13.5 nm being close to each other, ZrSi{sub 2} films are more effective as protection coatings (they are less prone to oxidation and more degradation-resistant).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Ag addition on FePt L1{sub 0} ordering transition: A direct observation of ordering transition and Ag segregation in FePtAg alloy films

FePt and (FePt){sub 91.2}Ag{sub 8.8} alloy films were deposited by magnetron sputtering. The average coercivity of (FePt){sub 91.2}Ag{sub 8.8} films reaches 8.51 × 10{sup 5} A/m, which is 0.63 × 10{sup 5} A/m higher than that of the corresponding FePt films. Ag addition effectively promotes the FePt L1{sub 0} ordering transition at a relatively low annealing temperature of 400 °C. The promotion mechanism was investigated by using in situ high-resolution transmission electron microscopy (HRTEM) and ex situ X-ray absorption fine structure (XAFS). The concurrence of ordering transition and Ag segregation in FePtAg alloy films was first observed by using in situ heating HRTEM. The time-resolved evolution reveals more details on the role of Ag addition in FePt low-temperature ordering. Ex situ XAFS results further confirm that Ag replaces Fe sites in the as-deposited films and segregates from FePt-Ag solid solution phase through annealing at elevated temperatures. The segregation of Ag atoms leaves vacancies in the grain. The vacancy formation is believed to accelerate the diffusion of Fe and Pt atoms, which is critical for the L1{sub 0} ordering transition.

36 MATERIALS SCIENCE↗

All-Sputtered, Superior Power Density Thin-Film Solid Oxide Fuel Cells with a Novel Nanofibrous Ceramic Cathode

Thin film solid oxide fuel cells (TF-SOFCs) are attracting attention due to their ability to operate at comparatively lower temperatures (400–650 °C) that are unattainable for conventional anode-supported SOFCs (650–800 °C). However, limited cathode performance and cell scalability remain persistent issues. Here, we report a new approach of fabricating yttria-stabilized zirconia (YSZ)-based TF-SOFCs via a scalable magnetron sputtering process. Notable is the development and deposition of a porous La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 2.95 (LSCF)-based cathode with a unique fibrous nanostructure. This all-sputtered cell shows an open-circuit voltage of ~1.0 V and peak power densities of ~1.7 and ~2.5 W/cm 2 at 600 and 650 °C, respectively, under hydrogen fuel and air along with showing stable performance in short-term testing. The power densities obtained in this work are the highest among YSZ-based SOFCs at these low temperatures, which demonstrate the feasibility of fabricating exceptionally high-performance TF-SOFC cells with distinctive dense or porous nanostructures for each layer, as desired, by a sputtering process. This work illustrates a new, potentially low-cost, and scalable platform for the fabrication of next-generation TF-SOFCs with excellent power output and stability.

25 ENERGY STORAGE↗

Influence of sputtering power on the optical properties of ITO thin films

Tin doped indium oxide films are widely used in transparent conducting coatings such as flat panel displays, crystal displays and in optical devices such as solar cells and organic light emitting diodes due to the high electrical resistivity and optical transparency in the visible region of solar spectrum. The deposition parameters have a commendable influence on the optical and electrical properties of the thin films. In this study, ITO thin films were prepared by RF magnetron sputtering. The properties of the films prepared under varying sputtering power were compared using UV- visible spectrophotometry. Effect of sputtering power on the energy band gap, absorption coefficient and refractive index are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Converse magnetoelectric coupling in NiFe/Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–PbTiO{sub 3} nanocomposite thin films grown on Si substrates

Multiferroic NiFe (∼30 nm)/Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–PbTiO{sub 3}(PMN–PT, ∼220 nm) bilayered thin films were grown on common Pt/Ti/SiO{sub 2}/Si substrates by a combination of off-axis magnetron sputtering and sol-gel spin-coating technique. By using AC-mode magneto-optical Kerr effect technique, the change in the Kerr signal (magnetization) of the NiFe upon applying a low-frequency AC voltage to the PMN–PT film was in situ acquired at zero magnetic field. The obtained Kerr signal versus voltage loop essentially tracks the electromechanical strain curve of the PMN–PT thin film, clearly demonstrating a strain-mediated converse magnetoelectric coupling, i.e., voltage-modulated magnetization, in the NiFe/PMN–PT nanocomposite thin films.

36 MATERIALS SCIENCE↗

Layering and temperature-dependent magnetization and anisotropy of naturally produced Ni/NiO multilayers

Ni/NiO multilayers were grown by magnetron sputtering at room temperature, with the aid of the natural oxidation procedure. That is, at the end of the deposition of each single Ni layer, air is let to flow into the vacuum chamber through a leak valve. Then, a very thin NiO layer ({approx}1.2 nm) is formed. Simulated x-ray reflectivity patterns reveal that layering is excellent for individual Ni-layer thickness larger than 2.5 nm, which is attributed to the intercalation of amorphous NiO between the polycrystalline Ni layers. The magnetization of the films, measured at temperatures 5-300 K, has almost bulk-like value, whereas the films exhibit a trend to perpendicular magnetic anisotropy (PMA) with an unusual significant positive interface anisotropy contribution, which presents a weak temperature dependence. The power-law behavior of the multilayers indicates a non-negligible contribution of higher order anisotropies in the uniaxial anisotropy. Bloch-law fittings for the temperature dependence of the magnetization in the spin-wave regime show that the magnetization in the multilayers decreases faster as a function of temperature than the one of bulk Ni. Finally, when the individual Ni-layer thickness decreases below 2 nm, the multilayer stacking vanishes, resulting in a dramatic decrease of the interface magnetic anisotropy and consequently in a decrease of the perpendicular magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High thermal stability and low electrical resistivity carbon-containing Cu film on barrierless Si

Interfacial structures and electrical resistivities of a carbon-doped Cu film at different annealing temperatures and times were investigated. The film was prepared by magnetron sputtering on barrierless silicon. After annealing, grain growth was distinctly hindered and a carbon-containing nanometer thick passive amorphous layer was formed at the film/substrate interface. The film had a resistivity of about 2.7 muOMEGA cm after annealing at 400 deg. C for 1 h and maintained a low resistivity of 3.8 muOMEGA cm even after 9 h annealing at 400 deg. C. The low electrical resistivity in combination with the high thermal stability makes carbon doping a promising technique for future Cu interconnects on barrierless Si.

36 MATERIALS SCIENCE↗

Anomalous Hall Effect in Epitaxial Ni–Mn–Ga Thin Films Grown on MgO(001) Substrate during the Martensitic Transformation

Epitaxial Ni–Mn–Ga thin films had been grown on MgO (001) by DC magnetron sputtering. And the anomalous Hall effect (AHE), microstructures, magnetism, and magnetoresistance (MR) were investigated. The AHE was measured in the film of Ni{sub 47.8}Mn{sub 30.8}Ga{sub 21.4} during the martensitic transformation. Meanwhile, the mechanism of the AHE was explained which indicates that the hall resistivity measured in our sample is primarily determined by AHE. The microstructures of the austenite phase and 7M martensite plates at room temperature had been observed on the film of Ni{sub 46.7}Mn{sub 31.7}Ga{sub 21.6} and Ni{sub 47.8}Mn{sub 30.8}Ga{sub 21.4}, respectively. Magnetic measurements reveal that all films possessed the martensitic transformation during the heating and cooling processes. In addition, the MR showed a negative value during the martensitic transformation which is mainly due to the reduction of spin-dependent scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upgrading multilayer zone plate technology for hard x-ray focusing

Multilayer zone plate (MZP) technology for hard X-ray focusing was upgraded and its focusing performance was evaluated using 20-keV X-rays at the synchrotron beamline (BL24XU) of SPring-8. The MZP consists of MoSi{sub 2} and Si layers alternately deposited on a glass fiber by magnetron sputtering so that all zone boundaries satisfy the Fresnel zone configuration. The focused beam was evaluated using knife-edge scanning in which the measured intensity distribution is identical to the line spread function (LSF) in the focal plane. The focused beamsize of about 30 nm was estimated by oscillation peaks observed in the measured LSF according to Rayleigh’s criterion.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic nanoscopic correlations in the crossover between a superspin glass and a superferromagnet

Collective behaviors in which the magnetic response depends not only on the individual constituents but also on their interactions are an area of active research. We have produced a paradigmatic system where DC magnetron sputtered Fe{sub x}Ag{sub 100–x} (x = 15, 35) nanogranular films exhibit a crossover between a superspin glass (SSG) state and a superferromagnetism (SFM), where direct exchange interactions overcome the frustration. The systems have been studied by non-linear susceptibility (NLS) and small angle neutron scattering (SANS). The NLS measurements were carried out between 2 and 300 K, in the absence of a biasing magnetic field, with frequencies spanning two decades. These measurements shed light on the complex nature of the interactions and the intricate relationship between direct exchange and long range magnetic interactions. The use of SANS allows us to estimate qualitatively the lengthscale of the magnetic correlations, and therefore identify a clear difference between the collective “supermagnetic” states (i.e., SSG and SFM) while establishing links between the structure and the magnetic interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrathin TiSiN overcoat protection layer for magnetic media

TiSiN ultrathin films (10-50 A) deposited by reactive magnetron sputtering from Ti{sub x}Si{sub y} targets were used as anticorrosion overcoats to protect Co-containing recording media. Films' growth, structure, composition, resistance against hydrolysis, and anticorrosion performances were studied by spectroscopy (x-ray reflectivity and diffraction, ellipsometry, x-ray photoelectron spectroscopy, Fourier transform infrared reflection-absorption spectroscopy) and simulated by molecular dynamics (using modified Tersoff-type interatomic interactions). TiSiN ultrathin overcoats were found to be dense amorphous oxynitrides containing Ti-O-Si linkages. The conversion of SiN{sub x} into SiO{sub x} by hydrolysis was prevented by introducing less than 20 at. % of Ti in the films. Thanks to the formation of Ti-O-Si linkages which densify the films and reduce oxygen diffusion, good corrosion protection of the magnetic media was achieved down to 28 A TiSiN overcoat thickness.

36 MATERIALS SCIENCE↗

Conversion mechanism of conductivity of phosphorus-doped ZnO films induced by post-annealing

The effects of post-annealing on conductivity of phosphorus-doped ZnO (PZO) films grown at 500 Degree-Sign C by radio frequency magnetron sputtering are investigated in a temperature ranging from 600 Degree-Sign C to 900 Degree-Sign C. The as-grown PZO exhibits n-type conductivity with an electron concentration of 1.19 Multiplication-Sign 10{sup 20} cm{sup -3}, and keeps n-type conductivity as annealed at 600 Degree-Sign C-700 Degree-Sign C but electron concentration decreases with increasing temperature. However, it converts to p-type conductivity as annealed at 800 Degree-Sign C. Further increasing temperature, it still shows p-type conductivity but the hole concentration decreases. It is found that the P occupies mainly Zn site (P{sub Zn}) in the as-grown PZO, which accounts for good n-type conductivity of the as-grown PZO. The amount of the P{sub Zn} decreases with increasing temperature, while the amount of Zn vacancy (V{sub Zn}) increases from 600 Degree-Sign C to 800 Degree-Sign C but decreases greatly at 900 Degree-Sign C, resulting in that the amount of P{sub Zn}-2V{sub Zn} complex increases with increasing temperature up to 800 Degree-Sign C but decreases above 800 Degree-Sign C. It is suggested that the P{sub Zn}-2V{sub Zn} complex acceptor is responsible for p-type conductivity, and that the conversion of conductivity is due to the change of the amount of the P{sub Zn} and P{sub Zn}-2V{sub Zn} with annealing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved passivation of the ZnO/Si interface by pulsed laser deposition

Zinc oxide thin-films were grown on crystalline silicon employing magnetron sputtering and pulsed laser deposition. Bulk and interface properties were investigated using scanning electron microscopy, Raman backscattering, photoluminescence, and infrared spectroscopic ellipsometry. Sputter deposited ZnO samples reveal a large degree of disorder and an interface defect density of Almost-Equal-To 10{sup 12} cm{sup -2}. A significant improvement of the structural quality is observed in samples grown by pulsed laser deposition. The bulk defect density is further reduced, when introducing monatomic oxygen during deposition. Simultaneously, the defect density at the ZnO/Si interface decreases by about a factor of five. Implications for devices containing ZnO/Si interfaces are discussed.

36 MATERIALS SCIENCE↗

Transparent conductive Al-doped ZnO thin films grown at room temperature

Aluminum-doped ZnO (ZnO:Al, AZO) thin films were prepared on glass substrates by dc reactive magnetron sputtering from a Zn-Al alloy target at room temperature. The effects of the Ar-to-O{sub 2} partial pressure ratios on the structural, electrical, and optical properties of AZO films were studied in detail. AZO films grown using 100:4 to 100:8 Ar-to-O{sub 2} ratio result in acceptable quality films with c-axis orientated crystals, uniform grains, 10{sup -3} {Omega} cm resistivity, greater than 10{sup 20} cm{sup -3} electron concentration, and high transmittance, 90%, in the visible region. The lowest resistivity of 4.11x10{sup -3} {Omega} cm was obtained under the Ar-to-O{sub 2} partial pressure ratio of 100:4. A relatively strong UV emission at {approx}3.26 eV was observed in the room-temperature photoluminescence spectrum. X-ray photoelectron spectroscopy analysis confirmed that Al was introduced into ZnO and substitutes for Zn and doped the film n-type.

36 MATERIALS SCIENCE↗

Pathway to tune sputter coated Nb$_3$Sn with Zr

Superconducting radio frequency (SRF) cavities are essential elements of many modern-day particle accelerators such as, European XFEL (DESY), LCLS II-HE (SLAC) and PIP II (Fermilab). Nb$_3$Sn superconducting material promises significant potential to exceed the performance of conventional niobium based SRF cavities. We aim to advance the ongoing R$&$D efforts to achieve Nb$_3$Sn coated cavities with high material quality. In this work, we have developed to achieve a route for effectively reducing the intrinsic defects in magnetron sputter coated Nb$_3$Sn SRF cavities and eventually improve the overall RF performance. We have observed that Zr is mainly being incorporated as ZrO$_2$ precipitates of average dimensions ranging from 20-100nm. By increasing the concentration of Zr, we have three major effects in the physical properties. Firstly, we noted that the density of the surface and bulk voids as well as their average dimensions are dramatically reduced on increasing the Zr content in Nb$_3$Sn. These surface voids are believed to be detrimental to cavity applications due to increase the local dissipation of electric and magnetic fields. These results indicate that inclusion of Zr in Nb$_3$Sn sputtered coating will improve the material quality and might help to reduce the overall RF power dissipation. Secondly, we observed that increasing Zr concentration from 0 to 2.4% substantially improves both superconducting transition temperature (Tc) and upper critical magnetic field (Hc2). However, on further increasing the Zr concentration to 24%, we noticed a small decrement in the Hc2 value. These results infer that the increase in Zr concentration up to an optimal concentration will be beneficial to enhance the superconducting properties. Increase in Tc promises lesser RF losses and improvement in accelerating gradient, whereas the increase in Hc2 suggests more efficient flux pinning which could give rise to high quality factors in presence of multi-Tesla magnetic field. Additionally, we also observed that increasing Zr concentration possibly prevents the oxygen diffusion and leads to thinner formation of primary surface oxide (Nb$_2$O$_5$ and SnO). This study gives a route to tune Zr fraction in Nb3Sn to modify the physical properties that control the high field performance of Nb3Sn RF cavities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design and fabrication of Argonne/KICP detectors for CMB polarization.

We present the design, microfabrication and assembly of dual-polarization absorber-coupled Transition Edge Sensor (TES) bolometer detectors for cosmic microwave background B-mode polarization studies. The device consists of two separate dies incorporating suspended silicon nitride membranes within silicon frames, carefully aligned perpendicularly and fixtured face-to-face. Polarization sensitivity around 95 GHz is provided by a single dipole-like absorber element; we briefly analyze this absorber-in-waveguide configuration in closed form using the EMF method. Proximity effect Mo/Au bilayers provide control of the TES critical temperature between 400 mK and 600 mK, with a normal resistance R{sub n} {approx} 1{Omega}. DC magnetron sputtering, wet etching, and liftoff were employed for TES fabrication. Optimization of the superconducting Mo thin film utilized independent RF bias applied to the substrate during deposition in a confocal geometry. This technique allows outstanding thin film uniformity and stress to be achieved simultaneously over a 4-inch wafer surface, leading to excellent superconducting properties. Device thermal conductance in the range from 25-250pW/K was achieved using suspended silicon nitride membranes 1 micron thick. The value of the thermal conductance depends very strongly upon the surface roughness, and therefore in turn upon the treatment of the silicon nitride material during fabrication.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗