Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Half-Metallic Ferrimagnetic Characteristics of Co{sub 2}YZ (Z = P, As, Sb, and Bi) New Full-Heusler Alloys: a DFT Study

The full-Heusler alloys Co{sub 2}YZ (Z = P, As, Sb, and Bi) were investigated by using the state-of-the-art full-potential linearized augmented plane wave plus local orbital (FP-LAPW + lo) method within the framework of density functional theory (DFT), to understand the structural, electronic, and magnetic properties of these new Heusler alloys. The generalized gradient approximation (GGA) was chosen to define the exchange-correlation potential for studying the structural properties, whereas electronic and magnetic properties were developed by using the GGA + U scheme, where U is the Hubbard term, which explains the Coulomb repulsion and was applied to describe the “d” electrons. The structural properties indicated that the ferromagnetic states of these compounds are energetically more favorable than the paramagnetic states. Through results on the electronic structures (band structures and densities of states), it is found that all these alloys exhibit a complete half-metallic nature, with half-metallic gaps (E{sub HM}) of 0.632, 0.605, 1.223, and 0.922 eV for Co{sub 2}YP, Co{sub 2}YAs, Co{sub 2}YSb, and Co{sub 2}YBi alloys, respectively. The magnetic properties indicated that the total spin magnetic moments of these Heusler alloys obey the Slater-Pauling rule around value 2 µ{sub B} approximately. The local magnetic moments of Co and Y transition elements have opposite signs with different intensities, thus revealing the ferromagnetic character. Our study of both electronic and magnetic properties demonstrates in detail that Co{sub 2}YZ (Z = P, As, Sb, and Bi) full-Heusler alloys are complete half-metallic ferrimagnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Optimizing the use of pressurized bladders for the assembly of HL-LHC MQXFB magnets

The use of pressurized bladders for stress control of superconducting magnets was firstly proposed at Lawrence Berkeley National Laboratory in the early 2000s. Since then, the so-called ‘bladders and keys’ procedure has become one of the reference techniques for the assembly of high-field accelerator magnets and demonstrators. Exploiting the advantages of this method is today of critical importance for Nb$_{3}$Sn-based accelerator magnets, whose production requires the preservation of tight stress targets in the superconducting coils to limit the effects of the strain sensitivity and brittleness of the conductor. The present manuscript reports on the results of an experimental campaign focused on the optimization of the ‘bladders and keys’ assembly process in the MQXFB quadrupoles. These 7.2 m long magnets shall be among the first Nb$_{3}$Sn cryomagnets to be installed in a particle accelerator as a part of the High Luminosity upgrade of the LHC. One of the main practical implications of the bladders technique, especially important when applied to long magnets like MQXFB, is that to insert the loading keys, the opening of a certain clearance in the support structure is required. The procedure used so far for MQXF magnets involved an overstress in the coils during bladder inflation. The work presented here shows that such an overshoot can be eliminated thanks to additional bladders properly positioned in the structure. This optimized method was validated in a short model magnet and in a full-length mechanical model, becoming the new baseline for the series production at CERN. Furthermore, the results are supported by numerical predictions using finite element models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

Development and evaluation of superconducting circuit elements

An approach to the application of high Tc ceramic superconductors to practical circuit elements was developed and demonstrated. This method, known as the rigid-conductor process (RCP), involves the combination of a pre-formed, sintered, and tested superconductor material with an appropriate, rigid substrate via an epoxy adhesive which also serves to encapsulate the element from the ambient environment. Emphasis was on the practical means to achieve functional, reliable, and reproducible components. Although all of the work described in this report involved a YBa2Cu3Osub(7-x) high Tc superconductor material, the techniques developed and conclusions reached are equally applicable to other high Tc materials.

Haertling, Gene H.↗
DOE OSTI2026

Impact of Annealing on Superconducting Properties of Tantalum Thin Films

The pursuit for higher-coherence superconducting qubits has led to the adoption of new materials and innovative fabrication techniques. Among the commonly used superconducting materials, tantalum-based or tantalum-capped superconducting qubits have demonstrated the longest lifetimes, outperforming niobium devices even in the presence of their native oxides. Given the losses introduced by the surface oxide, one method to further improve performance is to reduce or eliminate the native oxide on tantalum through UHV annealing. In this work, we examine the effect of dissolved oxygen as a function of annealing temperature on the superconducting properties of tantalum thin films. Dissolved oxygen is quantified using atom probe tomography (APT) and secondary ion mass spectrometry (TOF-SIMS) and correlated with electromagnetic transport measurements performed using a Physical Property Measurement System (PPMS). This study observes that annealing decomposes the native oxide and drives oxygen diffusion into the film matrix. Increasing oxygen content decreases the superconducting transition temperature (Tc) and the residual resistivity ratio (RRR). The critical field decreases with the incorporation of oxygen, while the film’s coherence length decreases relatively by 5%. These results, as well as findings from ongoing studies linking fabrication processes to the structural and chemical properties of the superconducting film and Josephson junction, provide insight into effective strategies for improving the performance of superconducting devices.

Shinde, Maithilee [IIT, Chicago; Fermilab]↗
DOE OSTI2024

Pressure-Induced Superconductivity In Polycrystalline La 3 Ni 2 O 7 − δ

We synthesized polycrystalline La 3 Ni 2 O 7 − δ ( δ ≈ 0.0 7 ) samples by using the sol-gel method without postannealing under high oxygen pressure, and then measured temperature-dependent resistivity under various hydrostatic pressures up to 18 GPa by using the cubic anvil and two-stage multianvil apparatus. We find that the density-wave-like anomaly in resistivity is progressively suppressed with increasing pressure and the resistivity drop corresponding to the onset of superconductivity emerges at pressure as low as ∼ 6 GPa . Zero resistivity is achieved at 9 GPa below T c zero ≈ 6.6 K , which increases quickly with pressure to 41 K at 18 GPa. However, the diamagnetic response was not detected in the ac magnetic susceptibility measurements up to 15 GPa, indicating a filamentary nature of the observed superconductivity in the studied pressure range. The constructed T − P phase diagram reveals an intimate relationship between superconductivity, density-wave-like order, and the strange-metal-like behaviors. The observation of zero-resistance state in the polycrystalline La 3 Ni 2 O 7 − δ samples under high pressures not only corroborates the recent report of superconductivity in the pressurized La 3 Ni 2 O 7 crystals but also facilitates further studies on this emerging family of nickelate high- T c superconductors. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Accounting for partiality in serial crystallography using ray-tracing principles

Serial crystallography generates partial reflections from still diffraction images. Partialities are estimated with EVAL ray-tracing simulations, thereby improving merged reflection data to a similar quality as conventional rotation data. Serial crystallography generates ‘still’ diffraction data sets that are composed of single diffraction images obtained from a large number of crystals arbitrarily oriented in the X-ray beam. Estimation of the reflection partialities, which accounts for the expected observed fractions of diffraction intensities, has so far been problematic. In this paper, a method is derived for modelling the partialities by making use of the ray-tracing diffraction-integration method EVAL. The method estimates partialities based on crystal mosaicity, beam divergence, wavelength dispersion, crystal size and the interference function, accounting for crystallite size. It is shown that modelling of each reflection by a distribution of interference-function weighted rays yields a ‘still’ Lorentz factor. Still data are compared with a conventional rotation data set collected from a single lysozyme crystal. Overall, the presented still integration method improves the data quality markedly. The R factor of the still data compared with the rotation data decreases from 26% using a Monte Carlo approach to 12% after applying the Lorentz correction, to 5.3% when estimating partialities by EVAL and finally to 4.7% after post-refinement. The merging R{sub int} factor of the still data improves from 105 to 56% but remains high. This suggests that the accuracy of the model parameters could be further improved. However, with a multiplicity of around 40 and an R{sub int} of ∼50% the merged still data approximate the quality of the rotation data. The presented integration method suitably accounts for the partiality of the observed intensities in still diffraction data, which is a critical step to improve data quality in serial crystallography.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Elastic Properties of Lithium and Sodium Amides

This paper presents the optimization of the structural parameters of tetragonal and orthorhombic crystals α-LiNH{sub 2} and α-NaNH{sub 2} and computation of elastic constants and flexibility coefficients using the all-electron implementation of the Gaussian and augmented plane wave density functional method. The obtained elastic constants satisfy all conditions of mechanical stability of LiNH{sub 2} and α-NaNH{sub 2} crystals. From the viewpoint of elastic properties, α-LiNH{sub 2} crystal is isotropic, while α-NaNH{sub 2} crystal is rather anisotropic. Anisotropy under compression in α-NaNH{sub 2} crystal is higher than that under shear. The former is brittle, the latter is more plastic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Modifications of Superconducting Properties of Niobium Caused by Nitrogen Doping Recipes for High Q Cavities

A study is presented on the superconducting properties of niobium used for the fabrication of the SRF cavities after treating by recently discovered nitrogen doping methods. Cylindrical niobium samples have been subjected to the standard surface treatments applied to the cavities (electro-polishing, l 20°C bake) and compared with samples treated by additional nitrogen doping recipes routinely used to reach ultra-high quality factor values (>3· 1010 at 2 K, 16 MV/m). The DC magnetization curves and the complex magnetic AC susceptibility have been measured. Evidence for the lowered field of first flux penetration after nitrogen doping is found suggesting a correlation with the lowered quench fields. Superconducting critical temperatures Tc = 9.25 K are found to be in agreement with previous measurements, and no strong effect on the critical surface field (Bd) from nitrogen doping was found.

Vostrikov, Alexander↗
DOE OSTI2018

Published Tunneling Results of Binnig et al Interpreted as Related to Surface Superconductivity in SrTiO{sub 3}

In 1980, Binnig et al. reported tunneling measurements on Nb-doped SrTiO{sub 3}, and interpreted their results as indicating two-band superconductivity in the bulk of SrTiO{sub 3}. However, (1) effective masses determined from tunneling results in the normal state by Sroubek in 1969 and 1970 are much smaller than those determined by most other methods. The much smaller masses were attributed to properties of a surface layer by the present author in 1971. (2) The only other reports of two-band superconductivity in bulk SrTiO{sub 3} can be used to infer much smaller values for the band separations than found by Binnig et al. In this paper, we give an alternative explanation of the results of Binnig et al. in terms of superconductivity in a surface layer. We obtain fair fits to the band gaps versus Fermi energy for the two bands in the three samples where two surface subbands are occupied and to the temperature dependence of the gaps in one crystal, using a model with three adjustable interaction parameters, an adjustable energy for the phonons which dominate the pairing, and an adjustable ratio of the mean-field T{sub c} to the actual T{sub c}. We show results for a combined fit to the low-temperature band gaps and to the T-dependence in one crystal. The phonon energy which gives the best fit is 21 meV. This is probably an appropriate average over the three longitudinal polar modes and acoustic modes in the material. A large value of about two is found for the ratio T{sub cmf}/T{sub c}, and we conjecture that this arises because a band with a small Fermi energy, not seen in the tunneling results, plays a part in increasing T{sub cmf}/T{sub c}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Modeling of Raman-Scattering Signals in Biological Tissues by Direct and Two-Step Approaches

A search for an effective method of modelling of the Raman-spectroscopy problem in turbid (scattering) media has been performed taking into account the corresponding parameters of the detector and sample volume. A solution of the radiative-transfer equation by Monte-Carlo method underlies the proposed model. Two fundamental approaches to numerical modeling of Raman scattering are considered: the direct transport problem of Rayleigh and Raman photons at each point of the medium and the two-step model, in which a photon flux in the medium is calculated in the first stage, followed by generation of the corresponding number of Raman photons at each point.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Electronic band structure and optical properties of antimony selenide under pressure

In this work we present the optical properties of Antimony Selenide (Sb{sub 2}Se{sub 3}) under ambient conditions and under pressure of 9.2 GPa obtained using first principles calculations. We investigated the electronic band structure using the FP-LAPW method within the sphere of the density functional theory. Optical properties like refractive index, absorption coefficient and optical conductivity are calculated using the WIEN2k code.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Characterization of the dynamic densification behavior of cerium dioxide powders as a function of green density

The uniaxial strain dynamic densification behavior of cerium dioxide powders as a function of powder compact green density is investigated in this work. Cerium dioxide powders of two particle morphologies (rod-like and equiaxed) and two green densities (55% and 62.5% TMD) are shock compressed using the gas gun with specifically designed fixtures and their particle and shock wave velocities are measured using VISAR and multiple PDV probes. The obtained data describe the Hugoniot of the shocked cerium dioxide powders. Finally, the method used to produce this high fidelity Hugoniot data for cerium dioxide powders is discussed and preliminary data are shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Variational Principle for Mass Transport

A variation principle for mass transport in solids is derived that recasts transport coefficients as minima of local thermodynamic average quantities. The result is independent of diffusion mechanisms and applies to amorphous and crystalline systems. This unifies different computational approaches for diffusion and provides a framework for the creation of new approximation methods with error estimation. It gives a different physical interpretation of the Green function. Lastly, the variational principle quantifies the accuracy of competing approaches for a nontrivial diffusion problem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Fast Algorithm for Evaluating Critical Current of High-Temperature Superconducting Pancake Coil

Second-generation (2G) high-temperature superconducting (HTS) tapes are now capable of carrying very high transport current and promising for a wide range of applications. The critical current of HTS coils is important for applications, such as superconducting electric machines, superconducting magnetic energy storage, and superconducting magnets. Therefore, precisely and quickly calculating critical current of HTS coils is very important for designing HTS devices. This paper provides a fast algorithm for evaluating critical current of HTS pancake coil. The fast algorithm is realized through a stationary model, which is based on finite element method (FEM) software. The stationary model means that the model is solved by stationary study instead of time-dependent study. To validate this method, a pancake HTS coil was wound and its critical current was measured. Meanwhile, an axial symmetric stationary model was built according to the geometry of the measured HTS coil. By comparing measured and calculated results, the effectiveness of the stationary model was demonstrated. Moreover, the stationary model is compared with H formulation model. The calculated results by the two models are nearly the same. However, by using stationary calculation, the stationary model can remarkably speed up the computational process. Due to the advantage of calculating speed, the stationary model can be used to characterize and design large-scale HTS applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Fe and Co nanostructures embedded into the Cu(100) surface: Self-Organization and magnetic properties

The self-organization and magnetic properties of small iron and cobalt nanostructures embedded into the first layer of a Cu(100) surface are investigated using the self-learning kinetic Monte Carlo method and density functional theory. The similarities and differences between the Fe/Cu(100) and the Co/Cu(100) are underlined. The time evolution of magnetic properties of a copper monolayer with embedded magnetic atoms at 380 K is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Relationship between Surface Self-Diffusion and Bubble Mobility in Solids: Theory and Atomistic Simulation

Diffusion processes in solids are characterized by complex mechanisms occurring at the atomistic level. The relevant theoretical concepts are sufficiently developed in the case of the diffusion of point defects. At the same time, the diffusion of objects such as clusters of vacancies or nanometer-size cavities in the crystal lattice is described only in terms of continuous-medium approximation. This paper attempts to link the existing theory of diffusion of bubbles in a crystalline matrix with the atomistic description of the process on the basis of the molecular dynamics method. For simplicity, the diffusion of cavities in a two-dimensional Lennard-Jones lattice is considered. A controlled molecular dynamics method is proposed to speed up the direct computation of the diffusion rate of bubbles. Based on the results of simulation, a practical interpretation is given to a parameter of the continuum theory such as the rate of surface self-diffusion. The applicability range of the continuum theory is demonstrated, and principles for the refinement of the theory in the case of minimum-size bubbles are formulated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Vibrational and Thermal Properties of Oxyanionic Crystals

The vibrational and thermal properties of dolomite and alkali chlorates and perchlorates were studied in the gradient approximation of density functional theory using the method of a linear combination of atomic orbitals (LCAO). Long-wave vibration frequencies, IR and Raman spectra, and mode Gruneisen parameters were calculated. Equation-of-state parameters, thermodynamic potentials, entropy, heat capacity, and thermal expansion coefficient were also determined. The thermal expansion coefficient of dolomite was established to be much lower than for chlorates and perchlorates. The temperature dependence of the heat capacity at T > 200 K was shown to be generally governed by intramolecular vibrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗