Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixed Compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A higher-order finite element reactive transport model for unstructured and fractured grids

Abstract This work presents a new reactive transport framework that combines a powerful geochemistry engine with advanced numerical methods for flow and transport in subsurface fractured porous media. Specifically, the PhreeqcRM interface (developed by the USGS) is used to take advantage of a large library of equilibrium and kinetic aqueous and fluid-rock reactions, which has been validated by numerous experiments and benchmark studies. Fluid flow is modeled by the Mixed Hybrid Finite Element (FE) method, which provides smooth velocity fields even in highly heterogenous formations with discrete fractures. A multilinear Discontinuous Galerkin FE method is used to solve the multicomponent transport problem. This method is locally mass conserving and its second order convergence significantly reduces numerical dispersion. In terms of thermodynamics, the aqueous phase is considered as a compressible fluid and its properties are derived from a Cubic Plus Association (CPA) equation of state. The new simulator is validated against several benchmark problems (involving, e.g., Fickian and Nernst-Planck diffusion, isotope fractionation, advection-dispersion transport, and rock-fluid reactions) before demonstrating the expanded capabilities offered by the underlying FE foundation, such as high computational efficiency, parallelizability, low numerical dispersion, unstructured 3D gridding, and discrete fraction modeling.

58 GEOSCIENCES↗
DOE OSTI2021

Cryogenic Carbon Capture™ (CCC) Status Report

The Cryogenic Carbon Capture™ (CCC) process separates CO2 from light gases in essentially any continuous process. CCC cools the gases to the frost or desublimation point of CO2 (-100 to -135 °C), separates and pressurizes the solids, and warms all streams to produce a CO2-depleted stream at ambient pressure and a pure (99+%) pressurized liquid CO2 stream typically to about 150 bar, both at ambient temperature. The process also recovers all gas moisture and most gas impurities less volatile than CO2 (NOx, SOx, Hg, PM, UHC, CCC, etc.) in separable streams. CCC nearly eliminates refrigeration energy for sensible temperature changes through heat integration. CCC does require energy to change the CO2 phase from a mixed vapor to a pressurized fluid, which represents the minimum energy required of any process for this separation. CCC uses additional energy for turbomachinery inefficiencies, heat losses, moisture removal and overall process pressure drop. Aside from these real-world energy demands, CCC operates near the minimum energy required to perform this gas separation by minimizing stream recycling. CCC compresses CO2 as a liquid, which is one of several reasons it costs about about half as much and consumes about half as much energy as an amine process when using flue gases with about 15% CO2. The process also has several major additional advantages, including (a) it is a bolt-on retrofit technology that does not need steam or any modification of existing equipment, (b) it recovers water and nearly all pollutants in addition to CO2 from the flue gas, (c) it enables highly efficient and cost effective energy storage at grid scale and on time scales of minutes, (d) it enables NG storage if the energy storage option is used, and (d) it has a small footprint and is minimally disruptive to existing plants, requiring only electrical power and a gas source to operate. Sustainable Energy Solutions (SES) has scaled this technology through several levels, the largest of which captures nominally 1 tonne of CO2/day and is called the skid system. Skid system field tests include utility-scale power plants, cement plants, heating plants, and other utility or industrial sites that burn natural gas, biomass, coal, shredded tires, municipal waste, and combinations of these fuels. These field tests produced 95-99% CO2 capture with CO2 purities of 99+% and initial CO2 contents that range from 4 to 28%. SES currently seeks to scale the system to merchant scale (10-80 tonnes of CO2 per day). In the process of doing so, SES has demonstrated the potential for CCC to contribute to energy storage and direct air capture in innovative and cost-effective ways. This presentation discusses the overall process and highlights results from field and in-house tests. These include (a) measured CO2 capture rates and operating conditions from in-house and field tests, and (b) predicted utility-scale costs and energy demands. This discussion also includes the application of the CCC technology to energy storage and direct air capture.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1975

Computation of separated transonic turbulent flows

The two-dimensional Reynolds-averaged compressible Navier-Stokes equations are solved using MacCormack's second-order-accurate explicit finite difference method to simulate the separated transonic turbulent flow field over an airfoil. Four different algebraic eddy viscosity models are tested for viability to achieve turbulence closure for the class of flows considered. These models range from an unmodified boundary-layer mixing-length model to a relaxation model incorporating special considerations for the separation bubble region. Results of this study indicate the necessity for special attention to the separated flow region and suggest limits of applicability of algebraic turbulence models to these separated flow fields.

Deiwert, G. S.↗
DOE OSTI2020

Applying Configurational Complexity to the 2D Ruddlesden–Popper Crystal Structure

The layered Ruddlesden–Popper crystal structure can host a broad range of functionally important behaviors. In this work, we establish extraordinary configurational disorder in a layered Ruddlesden–Popper (RP) structure using entropy stabilization assisted synthesis. A protype A 2 CuO 4 RP cuprate oxide with five cations on the A-site sublattice is designed and fabricated into epitaxial single crystal films using pulsed laser deposition. When grown on a near lattice matched substrate, the (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 ) 2 CuO 4 film features a T'-type RP structure with uniform A-site cation mixing and square-planar CuO4 units. These observations are made with a range of combined characterizations using X-ray diffraction, atomic-resolution scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption spectroscopy measurements. It is further found that heteroepitaxial strain plays an important role in crystal phase formation during synthesis. Compressive strain over ~1.5% results in the formation of a non-RP cubic phase consistent with a Cu X 2O 4 spinel structure. The ability to manipulate configurational complexity and move between 2D layered RP and 3D cubic crystal structures in cuprate and related materials promises to enable flexible design strategies for a range of functionalities, such as magnetoresistance, unconventional superconductivity, ferroelectricity, catalysis, and ion transport.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental and computational studies on high-entropy carbide MoNbTaVWC 5 under high pressures

High-entropy carbide, MoNbTaVWC 5 , was synthesized from oxide precursors of the constituent metals, mixed with graphite powder in a microwave-generated hydrogen plasma at 26.66 kPa and 2100 °C. Ambient x-ray diffraction analysis confirms the full conversion of oxide precursors into a single-phase, face-centered cubic structure with a lattice parameter a = 4.3309 Å. Nanoindentation measured a hardness of 24.5 ± 1.3 GPa and an elastic modulus of 386 ± 22 GPa. The synthesized sample, mixed with a copper pressure marker, was studied by the radial x-ray diffraction technique with beryllium gasketing in a diamond anvil cell up to 70 GPa. The experimentally measured pressure–volume curve and shear strength were compared with theoretical predictions using the special quasi-random structure technique and density functional theory. MoNbTaVWC 5 achieved a 12% volume compression at 70 GPa and exhibited a high shear strength of 6.6 GPa. The present study demonstrates that the high-entropy carbide MoNbTaVWC 5 exhibits exceptional incompressibility and high strength under extreme conditions.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Reduction of gaseous pollutant emissions from gas turbine combustors using hydrogen-enriched jet fuel

Recent progress in an evaluation of the applicability of the hydrogen enrichment concept to achieve ultralow gaseous pollutant emission from gas turbine combustion systems is described. The target emission indexes for the program are 1.0 for oxides of nitrogen and carbon monoxide, and 0.5 for unburned hydrocarbons. The basic concept utilizes premixed molecular hydrogen, conventional jet fuel, and air to depress the lean flammability limit of the mixed fuel. This is shown to permit very lean combustion with its low NOx production while simulataneously providing an increased flame stability margin with which to maintain low CO and HC emission. Experimental emission characteristics and selected analytical results are presented for a cylindrical research combustor designed for operation with inlet-air state conditions typical for a 30:1 compression ratio, high bypass ratio, turbofan commercial engine.

Clayton, R. M.↗
NASA NTRS1995

Bending strength model for internal spur gear teeth

Internal spur gear teeth are normally stronger than pinion teeth of the same pitch and face width since external teeth are smaller at the base. However, ring gears which are narrower have an unequal addendum or are made of a material with a lower strength than that of the meshing pinion may be loaded more critically in bending. In this study, a model for the bending strength of an internal gear tooth as a function of the applied load pressure angle is presented which is based on the inscribed Lewis constant strength parabolic beam. The bending model includes a stress concentration factor and an axial compression term which are extensions of the model for an external gear tooth. The geometry of the Lewis factor determination is presented, the iteration to determine the factor is described, and the bending strength J factor is compared to that of an external gear tooth. This strength model will assist optimal design efforts for unequal addendum gears and gears of mixed materials.

Savage, Michael↗
NASA NTRS1972

Computer program for solving compressible nonsimilar-boundary-layer equations for laminar, transitional, or turbulent flows of a perfect gas

A computer program is described which solves the compressible laminar, transitional, or turbulent boundary-layer equations for planar or axisymmetric flows. Three-point implicit difference relations are used to reduce the momentum and energy equations to finite-difference form. These equations are solved simultaneously without iteration. Turbulent flow is treated by the inclusion of either a two-layer eddy-viscosity model or a mixing-length formulation. The eddy conductivity is related to the eddy viscosity through a static turbulent Prandtl number which may be an arbitrary function of the distance from the wall boundary. The transitional boundary layer is treated by the inclusion of an intermittency function which modifies the fully turbulent model. The laminar-boundary-layer equations are recovered when the intermittency is zero, and the fully turbulent equations are solved when the intermittency is unity.

Price, J. M.↗
DOE OSTI2025

Optimizing on-ramp merging for connected and automated vehicles: A hierarchical approach using deep reinforcement learning and optimal control

On-ramp merging for Connected and Automated Vehicles (CAVs) presents significant challenges in dynamic traffic environments. Traditional methods and recent learning-based approaches often fail to simultaneously address decision-making complexity and execution precision under fluctuating conditions. This study introduces a novel hierarchical framework that combines: (1) a high-level Deep Reinforcement Learning (DRL) module that coordinates merging sequences through Virtual Traffic Signals (VTS) with Yield/Green phases and (2) a low-level optimal controller generating collision-free speed trajectories via pseudospectral convex optimization. A convolutional autoencoder compresses high-dimensional traffic states to enhance responsiveness. Extensive simulations demonstrate a 12.5% improvement in mainline throughput a 28% reduction in emergency braking events, and 31.66% lower fuel consumption compared to baseline methods. Furthermore, the framework’s effectiveness in coordinating CAV merges highlights its potential for real-world deployment. Future work will extend validation to multi-lane scenarios with mixed traffic and large-scale multiple merging points.

Connected and automated vehicles↗
DOE OSTI2020

Ability of Particulate Matter Index to describe sooting tendency of various gasoline formulations in a stratified-charge spark-ignition engine

This study investigates the ability of Particulate Matter Index (PMI) to describe the sooting behavior of various gasoline formulations in a stratified-charge (SC) spark-ignition engine. Specifically, the engine was operated at 2000 rpm with an intake pressure of 130 kPa where soot formation is known to primarily occur in the bulk gases. Exhaust soot emissions were measured for nine test fuels at various exhaust gas recirculation levels. A comparison between measured soot levels and PMI shows that PMI is a relatively poor predictor of the sooting tendency of the tested fuels under lean SC combustion. Among the fuels, three fuels, namely the diisobutylene blend, High Olefin, and E30 fuels exhibit measured soot behavior opposite of that predicted by PMI. Optical diagnostics were utilized to further investigate the in-cylinder phenomena for these three fuels. Analysis of natural luminosity and diffused back-illumination extinction imaging suggests that fuel-induced differences in the amount of soot formed are responsible for a majority of the discrepancy in measured versus predicted sooting tendency. Fuel-induced differences in soot oxidation and spray development seem to play minor roles. Because the combustion and air-fuel mixing processes for lean SC combustion are different from conventional stoichiometric operation it is hypothesized that the PMI correlation needs to be modified to account for differences in stoichiometric air-fuel ratio and level of oxygenation between fuels. Furthermore, the role of fuel volatility in PMI possibly needs to be de-emphasized for SC operation with fuel injection into compression-heated gases.

42 ENGINEERING↗
DOE OSTI2023

The influence of Al2O3 on the structural properties of MgSiO3 akimotoite

Abstract Akimotoite, a MgSiO3 polymorph present in the lower transition zone within ultramafic portions of subducting slabs and potentially also in the ambient mantle, will partition some amount of Al, raising the question of how this will affect its crystal structure and properties. In this study, a series of samples along the MgSiO3-Al2O3 (akimotoite-corundum) solid solution have been investigated by means of single-crystal X-ray diffraction to examine their crystal chemistry. Results show a strong nonlinear behavior of the a- and c-axes as a function of Al content, which arises from fundamentally different accommodation mechanisms in the akimotoite and corundum structures. Furthermore, two Al2O3-bearing akimotoite samples were investigated at high pressure to determine the different compression mechanisms associated with Al substitution. Al2O3-bearing akimotoite becomes more compressible at least up to 20 mol% Al2O3, due likely to an increase in compressibility as the Al cation is incorporated into the SiO6 octahedron. This observation is in strong contrast to the stiffer corundum end-member having a KT = 250 GPa, which is larger than that of the akimotoite end-member [KT = 205(1) GPa]. These findings have implications for mineral physics models of elastic properties, which have in the past assumed linear mixing behavior between the MgSiO3 akimotoite and Al2O3 corundum end-members to calculate sound wave velocities for Al-bearing akimotoite at high pressure and temperature.

Geochemistry & Geophysics↗
NASA NTRS1987

Fuel-air mixing and combustion in a two-dimensional Wankel engine

A two-equation turbulence model, an algebraic grid generalization method, and an approximate factorization time-linearized numerical technique are used to study the effects of mixture stratification at the intake port and gaseous fuel injection on the flow field and fuel-air mixing in a two-dimensional rotary engine model. The fuel distribution in the combustion chamber is found to be a function of the air-fuel mixture fluctuations at the intake port. It is shown that the fuel is advected by the flow field induced by the rotor and is concentrated near the leading apex during the intake stroke, while during compression, the fuel concentration is highest near the trailing apex and is lowest near the rotor. It is also found that the fuel concentration near the trailing apex and rotor is small except at high injection velocities.

Shih, T. I.-P.↗
NASA NTRS1995

A turbulence module for the NPARC code

A turbulence module is developed for the 2D version of the NPARC code which is currently restricted to planar or axisymmetric flows without swirling. Four turbulence models have been built into the module: Baldwin-Lomax, Chien, Shih-Lumley and CMOTT models. The first is a mixing-length eddy-viscosity model which is mainly used for initialization of computational fields and the last three are the low Reynolds number two-equation models. Unlike chien's model, both the Shih-Lumley and CMOTT models do not involve the dimensionless wall distance y(sup +), an advantage for separated flow calculations. Contrary to the NPARC and most other compressible codes, the non-delta form of transport equations is used which leads to a simpler linearization and is more effective than using the delta form in ensuring the positiveness of the turbulent kinetic energy and its dissipation rate. To reduce numerical diffusion while maintaining necessary stability, a second-order accurate and bounded scheme is used for the convective terms of the turbulent transport equations. This scheme is implemented in a deferred correction manner so that the main coefficients of the resulting difference equations are always positive, thus making the numerical solutions process unconditionally stable. The system of equations is solved via a decoupled method and by the alternating direction TDMA of Thomas. The module can be easily linked to the NPARC code for turbulent flow calculations.

Zhu, J.↗
DOE OSTI2025

Interplay of surface energy and rheology in biopolymer soil enhancement

Biopolymers such as xanthan gum (XG) and locust bean gum (LBG) hold great potential as eco-friendly alternative soil binders. In this work, we investigated the impact of XG/LBG mixtures on the unconfined compressive strength (UCS) of sand. The high strength of dry biopolymer/sand arises from the cohesion between solid polymer films and sand particles which supported by work of adhesion calculation and soil mechanics measurement. LBG exhibits much lower sand reinforcement efficacy because polymers unevenly distributed within sand matrix. The formation of a core-shell structure in LBG/sand is an interplay of surface free energy and viscoelastic properties of polymer solutions. This structure is altered when LBG mixed with XG at varying ratios as those physical properties changed due to the complexity of polymer chains association. By probing these factors, we aim to elucidate the role of surface energies and polymer physics in governing the strength of the sand/polymer network, thereby contributing to a more comprehensive understanding polymer-sand interface. The low strength of gels (G’ ∼10Pa) cannot solely account for the increased UCS of wet sand over 10 kPa. Instead, the high strength of biopolymer/sand is more likely derived from the granular particles with biopolymers as solid glue.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Low-Temperature Combustion of High Octane Fuels in a Gasoline Compression Ignition Engine

Gasoline Compression Ignition (GCI) has been shown as one of the advanced combustion concepts that could potentially provide a pathway to achieve cleaner and more efficient combustion engines. Fuel and air in GCI are not fully premixed as compared to homogeneous charge compression ignition (HCCI) which is a completely kinetic-controlled combustion system. Therefore, the combustion phasing can be controlled by the time of injection, usually post injection in a multiple-injection scheme, to mitigate combustion noise. Gasoline fuels ignite more difficult than Diesel. The autoignition quality of gasoline can be indicated by research octane number (RON). Fuels with high octane tend to have more resistance to auto-ignition, hence more time for fuel-air mixing. In this study, three fuels, namely, Aromatic, Alkylate, and E30, with similar RON value of 98 but different hydrocarbon compositions were tested in a multi-cylinder engine under GCI combustion mode. Considerations of EGR, start of injection (SOI), and boost were investigated to study the sensitivity of dilution, local stratification, and reactivity of the charge, respectively, for each fuel. Combustion phasing was kept constant during the experiments to the changes in ignition and combustion process before and after 50% of the fuel mass is burned. Emission characteristics at different levels of EGR and lambda were revealed for all fuels with E30 having the lowest filter smoke number (FSN) and was also most sensitive to the change in dilution. Reasonably low combustion noise (< 90 dB) and stable combustion (COVIMEP < 3%) were maintained during the experiments. The second part of this paper contains visualization of the combustion process obtained from endoscope imaging for each fuel at selected conditions. Soot radiation signal from GCI combustion were strong during late injection, and also more intense at low EGR conditions. Furthermore, soot/temperature profiles indicated only the high-temperature combustion period, while cylinder pressure-based heat release rate (HRR) showed a two-stage combustion phenomenon.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

Interface reactions and mechanical properties of FeCrAl-coated Zircaloy-4

FeCrAl has been proposed as a coating layer to enhance accident tolerance of Zircaloy-4 fuel cladding. In this study, we systematically examined the diffusion kinetics and interface compound formation of the spray-coated FeCrAl and Zircaloy-4 substrate. After vacuum annealing at 923 K, 963 K, and 998 K for various time periods, a mixed Zr 2 Fe phase and Zr 3 Fe formed at the interface. The formation energies of these two phases were found to be 65 kJ/mol and 58 kJ/mol for Zr 2 Fe and Zr 3 Fe, respectively. Bending tests of cantilevers prepared by a focused ion beam technique showed good interface bonding between the coating layer and the substrate. Nanoindentation and micropillar compression tests in the cross-section of polished samples show different mechanical responses of each phase. The substrate exhibited the lowest hardness and most ductile deformation under compression, while interfacial Zr 2 Fe and Zr 3 Fe possessed the highest hardness and brittle deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Using cylindrical implosions to investigate hydrodynamic instabilities in convergent geometry

Hydrodynamic instabilities such as the Rayleigh–Taylor (RT) and Richtmyer–Meshkov instabilities disrupt inertial confinement fusion (ICF) implosions through the growth of 3D perturbations. Growth of these 3D imperfections at the interfaces of an ICF capsule during implosion lead to mixing between materials that is detrimental to performance. These instabilities have been studied extensively in planar geometry, but such experiments lack the effects of convergence in spherical implosions. While several studies have been performed in spherical geometry, these often lack a direct means to measure perturbation growth. Experiments in cylindrical geometry include convergence effects while maintaining direct diagnostic access. Although cylinders have less compression than spheres, they do provide an excellent platform to validate modeling for convergent geometries. The problem with previous cylindrical implosion experiments was that the convergence ratios were limited to ~4. With the National Ignition Facility (NIF), larger cylindrical targets can be driven to convergences of 10–15 while maintaining a large enough final diameter to measure perturbation growth. This paper reviews the design process used to both benchmark radiation hydrodynamics codes and enable 1D post-processed simulations to explore design space to separate compression effects from acceleration/deceleration RT instability. Results from 1D simulations suggest that cylindrical implosions on the NIF can produce high-convergence experiments to validate RT instability growth for ICF implosions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Octane Requirements of Lean Mixed-Mode Combustion in a Direct-Injection Spark-Ignition Engine

Here, this study investigates the octane requirements of a hybrid flame propagation and controlled autoignition mode referred to as mixed-mode combustion (MMC), which allows for strong control over combustion parameters via a spark-initiated deflagration phase. Due to the throughput limitations associated with both experiments and 3-D computational fluid dynamics calculations, a hybrid 0-D and 1-D modeling methodology was developed, supported by experimental validation data. This modeling approach relied on 1-D, two-zone engine simulations to predict bulk in-cylinder thermodynamic conditions over a range of engine speeds, compression ratios, intake pressures, trapped residual levels, fueling rates, and spark timings. Those predictions were then transferred to a 0-D chemical kinetic model, which was used to evaluate the autoignition behavior of fuels when subjected to temperature–pressure trajectories of interest. Finally, the predicted autoignition phasings were screened relative to the progress of the modeled deflagration-based combustion in order to determine if an operating condition was feasible or infeasible due to knock or stability limits. The combined modeling and experimental results reveal that MMC has an octane requirement similar to modern stoichiometric spark-ignition engines in that fuels with high research octane number (RON) and high octane sensitivity (S) enable higher loads. Experimental trends with varying RON and S were well predicted by the model for 1000 and 1400 rpm, confirming its utility in identifying the compatibility of a fuel’s autoignition behavior with an engine configuration and operating strategy. However, the model was not effective in predicting (nor designed to predict) operability limits due to cycle-to-cycle variations, which experimentally inhibited operation of some fuels at 2000 rpm. Putting the operable limits and efficiency from MMC in the context of a state-of-the-art engine, the MMC showed superior efficiencies over the range investigated, demonstrating the potential to further improve fuel economy.

33 ADVANCED PROPULSION SYSTEMS↗