SEARCH · Search NASA

Results for “Multiphysics simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Computational Fluid Dynamics and Heat Transfer Modeling of a Dimpled Heat Exchanger

Multiphysics and analytical calculations were conducted for a heat exchanger with passive, natural circulation flow. A glycol/water working fluid convects the heat to a dimpled heat exchanger shell, which subsequently transfers the heat to the soil, which acts as the ultimate heat sink. Because the system is fully-passive, it is not subject to the expenses, maintenance, and mechanical breakdowns associated with moving parts. Density, heat capacity, and thermal conductivity material properties were measured for various soil samples, and subsequently included as input for the soil heat conduction model. The soil model was coupled to a computational fluid dynamics (CFD) heat exchanger model that included the dynamic Smagorinsky large eddy simulation and k- omega turbulence models. The analysis showed that the fluid dynamics and heat transfer models worked properly, albeit at a slow pace. Nevertheless, the coupled CFD/heat conduction simulation ran long enough to determine a key parameter—the amount of heat conducted from the heat exchanger to the ground. This unique performance value, along with experimental data, was used as input for stand-alone, fast-running CFD models, as well as boundaries to obtain solutions to partial differential equations for soil heat conduction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

NEAMS Model Contributions in 2023 to the National Reactor Innovation Center Virtual Test Bed for Use by Industry and Other Stakeholders

The U.S. Department of Energy (DOE) Office of Nuclear Energy’s Advanced Modeling and Simulation (NEAMS) Program develops models of advanced reactor phenomena to demonstrate code applicability to challenging physics problems, drive code development through user assessment, and perform code verification and validation. Meanwhile, the U.S. DOE’s National Reactor Innovation Center (NRIC) hosts an open-source website and associated GitHub repository called the Virtual Test Bed (VTB) on which computational models for advanced reactors are documented and shared with the reactor community. This work documents NEAMS efforts to support industry adoption of advanced modeling tools through contribution of 10 NEAMS models to the NRIC Virtual Test Bed including models for the High Temperature Test Facility (HTTF), TRISO fuel failure in a microreactor, and multiphysics models of a molten chloride fast reactor, among others. The open sharing of these models benefits the reactor community by providing “best practice” examples using NEAMS tools for advanced reactor physics problems. In particular, the HTTF model is being used for code validation and benchmarking activities. The microreactor and molten chloride fast reactor models are representative of analysis that may be useful for current candidates of DOME and LOTUS, NRIC’s physical testbeds. This report summarizes and provides links to these new models, among others.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2023

Neural network surrogate models for equations of state

Equation of state (EOS) data provide necessary information for accurate multiphysics modeling, which is necessary for fields such as inertial confinement fusion. Here, we suggest a neural network surrogate model of energy and entropy and use thermodynamic relationships to derive other necessary thermodynamic EOS quantities. We incorporate phase information into the model by training a phase classifier and using phase-specific regression models, which improves the modal prediction accuracy. Our model predicts energy values to 1% relative error and entropy to 3.5% relative error in a log-transformed space. Although sound speed predictions require further improvement, the derived pressure values are accurate within 10% relative error. Our results suggest that neural network models can effectively model EOS for inertial confinement fusion simulation applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Multiphysics modeling of accelerators through code integration

This work aims to improve the ability of particle accelerator researchers to develop high-performance accelerator cavity designs by creating an overall multiphysics framework that integrates and couples existing application codes. This framework will allow accelerator researchers to build multiphysics models that will optimize cavity design, improve understanding of whole-device performance, and reduce the development and fabrication costs of accelerator research. We utilize the open-source VizSchema data standard as an intermediate data structure interface layer to standardize interfaces between individual application codes. VizScema is extensively documented online, and plugins for VizSchema are available for popular visualization packages, including VisIt and ParaView. Currently, the work focuses on coupling the EM field solver COMSOL and the electron gun code MICHELLE to allow COMSOL field-solve results to be seamlessly used by MICHELLE for particle-solve. Later work will extend this integration to include other fields, particles, and thermodynamics simulation codes.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

Generating MCNP Input Files for Unstructured Mesh Geometries

The Los Alamos National Laboratory’s (LANL) Monte Carlo N-Particle (MCNP)1 transport code version 6.3 (also known as MCNP6.3) has the capability for tracking particles on unstructured mesh (UM) geometry models embedded into constructive solid geometry (CSG) cells. This feature has been developed for performing calculations of complex geometry models because manually creating CSG models is time-consuming and error-prone as the complexities of geometries increase. A UM geometry model is a collection of finite elements representing a solid geometry. The first step of the MCNP UM calculation is using other software packages to create a finite element mesh representation of a solid 3D geometry because the MCNP code cannot be used to generate a UM model. Computer-aided design (CAD) software is typically used to create a solid geometry model, which is later imported into mesh generation software to create a UM model. Some mesh generation software packages may also be used to create solid geometries and thus CAD files are not needed. The MCNP UM feature was originally designed for models generated by the Abaqus/CAE software suite. The MCNP code version 6.0 and later can process UM models formatted as Abaqus input files. Starting with a 6.3 version, the MCNP code can process HDF5 mesh input files. We only focus on the UM models formatted as Abaqus input files in this report since currently no external software can be used to generate HDF5 mesh input files for MCNP UM calculations. The MCNP code version 6.3 can be used to convert the Abaqus mesh input files into the HDF5 mesh input files, but this option is typically used by the MCNP code development team to test the HDF5 mesh input file feature. Several software packages (such as Abaqus, Attila4MC, or Cubit) can be used to create the Abaqus input files for MCNP UM calculations. An MCNP UM calculation using an Abaqus model requires two input file types: MCNP and Abaqus input files. The Abaqus input files needed for MCNP UM calcu lations must have the correct Abaqus syntax and meet the additional requirements by the MCNP code. The MCNP code can process only Abaqus input files that make use of part and assembly definitions, where elements in each part must be grouped into one or more element sets (i.e., elset) using *Elset keyword lines with specified naming formats. The MCNP and Abaqus input files required for MCNP UM simulations must be related; pseudo-cells in an MCNP input file must be constructed from mesh model data from an Abaqus input file. For large complex UM models, it is tedious to manually create MCNP UM input files. The um pre op (unstructured mesh pre operations) program with the -m option can be used to create a skeleton MCNP input file from an Abaqus input file [6]. Since the um pre op program was written in Fortran and was not written for optimized performance, this program is a deprecated feature in the MCNP code version 6.3 and may be removed in the next release of the code. To improve calculation flow of multiphysics calculations, a Python3 code called write mcnp um input has been developed to generate an MCNP input file instead of using the um_pre_op -m option. This Python code was initially released to the public in 2020. We have updated this Python code for MCNP6.3 and it was used to generate the MCNP input files used to verify the MCNP6.3 code. The write_mcnp_um_input code is included with the MCNP6.3 code package which will be released to the public through the Radiation Safety Information Computational Center (RSICC) at Oak Ridge National Laboratory. This report is a revision of LA-UR-20-27139 report.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2021

xSDK: Building an ecosystem of highly efficient math libraries for exascale

Current efforts to build increasingly powerful computer architectures are opening up new avenues for more complex and higher fidelity simulations coupled with data analytics and learning, leading to new scientific insights and deeper understanding. At one extreme, exascale computers will be much faster than previous computer generations (performing 10 18 operations per second—that is, 1,000 times faster than petascale). To achieve these performance improvements, computer architectures are becoming increasingly complex, with deep memory hierarchies, very high node and core counts, and heterogeneous features such as graphics processing units (GPUs). Such architectural changes impact the full breadth of computing scales, as heterogeneity pervades even current-generation laptops, workstations, and moderate-sized clusters. While emerging advanced architectures provide unprecedented opportunities, they also present significant challenges for developers of scientific applications, such as multiphysics and multiscale codes, who must adapt their software to handle disruptive changes in architectures and new programming models that have not yet stabilized. Developers must consider increasing concurrency while reducing communication and synchronization, and other complexities such as the potential for using mixed precision to leverage the compute power available in low-precision tensor cores. On one hand, developers must implement new scientific capabilities, which in turn increase code complexity. On the other hand, the codes must be ported to new architectures, requiring the inclusion of new programming models and the restructuring of code to achieve good performance. Addressing these issues is beyond the capability of any single person or team—leading to the need for collaboration among many teams, who encapsulate their expertise in reusable software and work together to create sustainable software ecosystems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Reduced-Order CFD Modeling to Support Waste Loading Optimization in Hanford WTP Vitrification

The U.S. DOE Hanford Site stores over 56 million gallons of radioactive liquid tank waste that must be treated and immobilized for long-term disposal The Waste Treatment and Immobilization Plant (WTP) will vitrify this waste by feeding it into Joule-heated melters, where it is incorporated into a stable borosilicate glass Computational fluid dynamics (CFD) simulations of glass melters can provide insight into the maximum achievable waste loading under varying melter operating conditions Fully resolved VOF multiphase simulations were used as the reference model to capture bubble-driven convection in the melter, including bubble formation, rise behavior, and induced glass melt circulation Effective bubble column diameter and rise velocity were extracted from the resolved simulations, compared with empirical correlations, and refit across relevant viscosity and gas flow rate conditions Explicit gas–liquid interface tracking was replaced with a single-phase momentum source term model, enabling faster steady-state CFD simulations while preserving the dominant hydrodynamic effects of bubbling New empirical correlations were developed for effective bubble column diameter and bubble rise velocity by fitting resolved simulation data across expected melter viscosity and gas flow rate ranges, providing improved inputs for the momentum source term model compared with existing literature correlations The momentum source term model reduced fluid-domain mesh size by 89% and achieved an 8.4× computational speedup relative to resolved bubbling simulations The validated momentum source term approach enables prediction of process-relevant heat transfer behavior in the integrated melter model, including heat transfer from the molten glass to the cold cap, plenum, refractory walls, and surrounding structural regions under varying melter operating conditions

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗

DOE OSTI2024

Multiphysics Time-Integration for Turbulent Combustion at the Exascale

Turbulent reacting flow systems are often modeled with coupled time-dependent partial differential equations (PDEs). Solving such equations can easily tax the world's largest supercomputers. One pragmatic strategy for attacking such problems is to split the PDEs into components that can more easily be solved in isolation. This generic operator-splitting strategy leads to a set of ordinary differential equations (ODEs) that need to be solved as part of an "outer-loop" time-stepping approach. In many combustion applications, the ODEs to be solved can be very stiff, exhibiting timescales that span many orders of magnitude. The SUNDIALS library provides a plethora of robust time integration algorithms for solving these ODEs on exascale-capable computing hardware, yet for many complex applications (such multicomponent fuels or emissions predictions), the chemical models remain too complex to solve using reasonable resources. The Quasi-Steady State Approximation (QSSA) can be an effective tool for reducing the size and stiffness of the simulations. In this talk, I will discuss the use of the SUDIALS library of ODE solvers together with automatic code generation tools to solve complex turbulent reacting flow problems using QSSA models.

chemistry↗

DOE OSTI2023

A sensitivity analysis to predict the neutronics behavior of samples irradiated in the VTR rabbit system

We report a low-order neutronics model is developed to carry out hundreds of simulations efficiently and investigate the neutronics behavior of samples being irradiated in a test reactor setting under different geometrical constraints. The low-order model allowed for simulations that yield the expected neutronics behavior of any irradiated sample in any environment and allows for the calculation of highly accurate spatially averaged statistics and idealized spatial distributions in the neutron flux. Several benchmarks are performed to evaluate the performance and limitations of the low-order model revealing many important findings. The low-order model predicted the LHGR in the EBR-II driver fuel to within 2.34% by only simulating the fuel rod by itself, which served as a validation for the model. Sensitivity studies investigated 3% enriched UO 2 and U-10Zr being irradiated in the Versatile Test Reactor rabbit system. The analyses investigated a range of combinations of 15 radii and 5 heights for each sample in the rabbit system. Similar data sets are also provided for irradiations in the Advanced Test Reactor’s B-10 irradiation position, which is a thermal neutron spectrum environment. Generalized fits and fit coefficients are obtained for sample heating, reaction rate densities, and local multiplication rate characteristics, allowing the predictions of the neutronics behavior of the samples based on their geometrical constraints. The analyses and fits laid the groundwork for developing a user-end Multiphysics analysis framework to assist and accelerate irradiation experiment design and optimization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS2014

Object-Oriented/Data-Oriented Design of a Direct Simulation Monte Carlo Algorithm

Over the past decade, there has been much progress towards improved phenomenological modeling and algorithmic updates for the direct simulation Monte Carlo (DSMC) method, which provides a probabilistic physical simulation of gas Rows. These improvements have largely been based on the work of the originator of the DSMC method, Graeme Bird. Of primary importance are improved chemistry, internal energy, and physics modeling and a reduction in time to solution. These allow for an expanded range of possible solutions In altitude and velocity space. NASA's current production code, the DSMC Analysis Code (DAC), is well-established and based on Bird's 1994 algorithms written in Fortran 77 and has proven difficult to upgrade. A new DSMC code is being developed in the C++ programming language using object-oriented and data-oriented design paradigms to facilitate the inclusion of the recent improvements and future development activities. The development efforts on the new code, the Multiphysics Algorithm with Particles (MAP), are described, and performance comparisons are made with DAC.

Liechty, Derek S.↗

NASA NTRS2012

A Comparison of Perturbed Initial Conditions and Multiphysics Ensembles in a Severe Weather Episode in Spain

Ensembles of numerical model forecasts are of interest to operational early warning forecasters as the spread of the ensemble provides an indication of the uncertainty of the alerts, and the mean value is deemed to outperform the forecasts of the individual models. This paper explores two ensembles on a severe weather episode in Spain, aiming to ascertain the relative usefulness of each one. One ensemble uses sensible choices of physical parameterizations (precipitation microphysics, land surface physics, and cumulus physics) while the other follows a perturbed initial conditions approach. The results show that, depending on the parameterizations, large differences can be expected in terms of storm location, spatial structure of the precipitation field, and rain intensity. It is also found that the spread of the perturbed initial conditions ensemble is smaller than the dispersion due to physical parameterizations. This confirms that in severe weather situations operational forecasts should address moist physics deficiencies to realize the full benefits of the ensemble approach, in addition to optimizing initial conditions. The results also provide insights into differences in simulations arising from ensembles of weather models using several combinations of different physical parameterizations.

severe weather↗

DOE OSTI2021

Hyporheic Exchange Driven by Submerged Rigid Vegetation: A Modeling Study

Flow-vegetation interaction affects fluid flow hydraulics and associated material transport in river corridors. Concomitant changes in pressure within the flow field due to the presence of vegetation may act as a driver for the formation of hyporheic flow across the sediment-water interface. This potentially important process, however, has yet to be studied. In order to investigate vegetation-induced hyporheic exchange, a series of numerical models of interlinked surface-subsurface flow modified by plant stems was conducted. Periodically staggered plant stem arrays on a flat sediment bed were considered within a coupled multiphysics computational fluid dynamics approach. Plants were idealized as rigid cylinders and arranged in different streamwise and spanwise spacing distances. Each vegetation array was then subjected to a broad range of flow Reynolds Numbers (Re). The results showed that hyporheic flow occurs in all conditions with the presence of vegetation. The vegetation-induced hyporheic flux is found to be a function of Re via a power law. The flux increases with interstem space until the space reaches the distance that rigid stems no longer affect the flow structures in the vicinity of each other. Larger intervegetation distances lead to a larger hyporheic zone. A direct comparison with bedforminduced hyporheic flow showed that vegetation can induce higher hyporheic flux through relatively shallower exchange zones. The results of all the simulations were synthesized into predictive models for hyporheic flux, bulk residence time and exchange depth based on drag coefficient, vegetation density, and Reynolds Number.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2017

Quantitative analysis of time-resolved microwave conductivity data

Flash-photolysis time-resolved microwave conductivity (fp-TRMC) is a versatile, highly sensitive technique for studying the complex photoconductivity of solution, solid, and gas-phase samples. The purpose of this paper is to provide a standard reference work for experimentalists interested in using microwave conductivity methods to study functional electronic materials, describing how to conduct and calibrate these experiments in order to obtain quantitative results. The main focus of the paper is on calculating the calibration factor, K, which is used to connect the measured change in microwave power absorption to the conductance of the sample. We describe the standard analytical formulae that have been used in the past, and compare them to numerical simulations. This comparison shows that the most widely used analytical analysis of fp-TRMC data systematically under-estimates the transient conductivity by ~60%. We suggest a more accurate semi-empirical way of calibrating these experiments. However, we emphasize that the full numerical calculation is necessary to quantify both transient and steady-state conductance for arbitrary sample properties and geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Automated power-following control for nuclear thermal propulsion startup and shutdown using MOOSE-based applications

This paper describes an investigation of various automated control strategies applied to a full-core multiphysics Griffin/Bison/RELAP-7 model of a prototypical nuclear thermal propulsion system. In all cases, control is achieved by actuating control drums based on the demanded power and predicted quantities from the numerical model. One key finding is that hybrid proportional integral derivative controllers – a novel type of controller that uses both power and reactivity predicted signals – can demonstrate a level of performance rivaling that of period-generated control. The former requires parameter tuning, while the latter mostly necessitates providing reactivity coefficients and temperature rates of change, which could be very challenging to accurately measure in real-time. In addition, decay heat plays an important role in determining cooling requirements during cooldown phases. A decay heat model, accounting for burn time and throttling, was derived, and is incorporated within the model to simulate the steady-state and shutdown phases and satisfyingly follow the power demand. However, temperature overshoots and non-constant specific impulse during throttling will necessitate further improvements.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2021

OpenMC

OpenMC is an open source, community-developed framework for performing Monte Carlo particle transport calculations.It is capable of simulating neutron and photon transport below ~50 MeV and also includes a model for bremsstrahlung production of photons by electrons/positrons. Fixed source, k-eigenvalue, and subcritical multiplication problems can be solved. Problem geometries can be modeled either using constructive solid geometry or a CAD representation. A flexible and efficient tally system enables a wide variety of physical quantities to be tallied and analyzed. OpenMC can run in parallel using a hybrid MPI and OpenMP programming model and has been extensively tested on leadership class supercomputers. A built-in Bateman equation solver enables the modeling of material composition changes due to irradiation. One of the unique features of OpenMC is its rich, extensible Python and C/C++ programming interfaces that enable programming pre- and post-processing, multigroup cross section generation, workflow automation, multiphysics coupling, and the visualization of geometry and tally results. In addition to the core Monte Carlo transport solver and associated APIs, OpenMC includes a Python-based nuclear data interface that enables power users to inspect, modify,and perform various types of nuclear data processing on ENDF, ACE, and OpenMC¿s native HDF5 files

ROMANO, PaulK.↗

DOE OSTI2018

Modeling of Powder Bed Manufacturing Defects

Powder bed additive manufacturing offers unmatched capabilities. The deposition resolution achieved is extremely high enabling the production of innovative functional products and materials. Achieving the desired final quality is, however, hampered by many potential defects that have to be managed in due course of the manufacturing process. Defects observed in products manufactured via powder bed fusion have been studied experimentally. In this effort we have relied on experiments reported in the literature and—when experimental data were not sufficient—we have performed additional experiments providing an extended foundation for defect analysis. There is large interest in reducing the effort and cost of additive manufacturing process qualification and certification using integrated computational material engineering. A prerequisite is, however, that numerical methods can indeed capture defects. A multiscale multiphysics platform is developed and applied to predict and explain the origin of several defects that have been observed experimentally during laser-based powder bed fusion processes. The models utilized are briefly introduced. The ability of the models to capture the observed defects is verified. The root cause of the defects is explained by analyzing the numerical results thus confirming the ability of numerical methods to provide a foundation for rapid process qualification.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Status of Multiphysics Modeling of Critical DPCs in a Geological Repository

A summary of previous work focused on the first two scenarios is presented as an established workflow. These canisters could reach an equilibrium at a low quasi–steady-state power level that could be sustained for thousands of years. The majority of this report describes an effort to expand the initial methodology to include the scenario in which a DPC has enough excess reactivity to boil the water inside the canister. This scenario involves a variety of tools and modeling approaches to capture the two-phase behavior, including RELAP5-3D, STAR-CCM+, and TRACE. Efforts using the high-fidelity computational fluid dynamics results to verify the accuracy of RELAP5-3D and TRACE for boiling DPCs are also presented. A new modeling strategy using TRACE appears to be the most promising approach for expanding the analysis of critical DPCs beyond the subcooled scenarios. Finally, this report describes ongoing work investigating the fourth scenario, in which a critical DPC is sealed in saturated bentonite. The primary goal in this research is to understand the power output and associated pressure increase to inform geomechanics simulations that could predict the impact on a geological repository.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Multiscale Ecosystem for solving Maxwell-Schrodinger equations of open quantum systems (OpenMS)

Light-matter interactions play an important role in many branches of physics, chemistry, energy, and materials science. In the strong coupling regime, light-matter interactions are able to tune the materials properties via the formation of new quasiparticles, such as plasmons and polaritons. However, theoretical and numerical modeling of the light-matter interaction-mediated processes remain a big challenge because light-matter interactions are fundamentally multiscale and multiphysics problems involving multiple interactions between electrons, nuclei, and photons at different time/length scales. In the current community, light-matter interactions were treated at different levels of theoretical complexity in quantum chemistry and quantum optics. In quantum optics or quantum photonics, the matter is usually simplified as a few-level system, and the light is treated quantum-mechanically. On the other hand, quantum chemistry explores first-principles methods, including both single-particle and many-body-based techniques, to describe the electronic properties of matter in detail. However, light is usually prescribed as a classical electromagnetic field, and the light-matter interaction is taken into account as an external potential via classical approximations. This software is designed to fill current modeling shortcomings by delivering a first-ever scalable multiscale platform for simulating light-matter interactions in realistic electromagnetic environments. The software solves Maxwell and Schrodinger equations self-consistent on the heterogeneous platforms. It implements HF/DFT, TDDFT, and coupled-cluster counterparts for light-matter interactions and adopts modular programming to offload massively parallel algorithms on a large number of CPU/GPUs.

Zhang, Yu↗