Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Correlating viscosity and die swell in 3D printing of polyphenylsulfone: A thermo-mechanical optimization modus operandi

Additive manufacturing (AM) of polyphenylsulfone (PPSU), an amorphous high-performance polymer (HPP), has shown promise in exhibiting structural integrity for many applications. With thermoplastic material extrusion 3D printing, parts consisting of layered melts exhibited voids, where the adhesion quality and void size depend on the processing parameters implemented during printing. However, the structure-process-property (SPP) relationships between the thermal properties and rheological and mechanical behavior of AM PPSU are poorly understood. Here, in this study, a comprehensive analysis of the thermal, thermo-mechanical, and layer-by-layer build-up of PPSU is investigated and correlated with viscosity and extrudate die swell behavior with void fraction volume as confirmed by high-resolution x-ray computed tomography (XCT). Gas chromatography–mass spectrometry (GC–MS) pyrolysis confirmed PPSU composition and degradation at 480 °C, consistent with thermo-gravimetric analysis TGA. A 141% difference in viscosity was observed when processing temperatures increased from 350 °C to 400 °C. Likewise, extrudate die swell decreased with increasing temperatures, resulting in a 17% difference. Tensile and compressive properties confirmed that higher extruding temperatures resulted in lower porosity and higher mechanical strength. In general, higher extruding temperatures lower the viscosity to allow for stronger cohesion between layers; however, increasing the temperature too high results in a below unity extrudate die swell, reducing mechanical properties. Therefore, to optimize the mechanical integrity of 3D printed amorphous PPSU parts, an increase in the viscosity, near unity of the extrudate die swell, and tempered extrusion temperature are needed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

OzDES Reverberation Mapping of Active Galactic Nuclei: Final Data Release, Black-Hole Mass Results, & Scaling Relations

Over the last decade, the Australian Dark Energy (OzDES) collaboration has used Reverberation Mapping to measure the masses of high redshift supermassive black holes. Here we present the final review and analysis of this OzDES reverberation mapping campaign. These observations use 6-7 years of photometric and spectroscopic observations of 735 Active Galactic Nuclei (AGN) in the redshift range 0.13-3.85 and bolometric luminosity range 44.3 - 47.5 erg/s. Both photometry and spectra are observed in visible wavelengths, allowing for the physical scale of the AGN broad line region to be estimated from reverberations of the H{̱e̱ṯa̱}̱, MgII and CIV emission lines. We successfully use reverberation mapping to constrain the masses of 62 super-massive black holes, and combine with existing data to fit a power law to the lag-luminosity relation for the H{̱e̱ṯa̱}̱ and MgII lines with a scatter of ~0.25 dex, the tightest yet identified, fit specifically for consistency with high redshift AGN. We fit a similarly constrained relation for CIV, resolving a tension with the low luminosity literature AGN by accounting for selection effects arising from finite survey length. We also examine the impact of emission line width and luminosity (related to accretion rate) in reducing the scatter of these scaling relationships and find no significant improvement over the lag-only approach for any of the three lines. Using these relations, we further estimate the masses and accretion rates of 246 AGN with single epoch methods. We also use these relations to estimate the relative sizes of the H{̱e̱ṯa̱}̱, MgII and CIV emitting regions. In short, we provide a comprehensive benchmark of high redshift AGN reverberation mapping at the close of this most recent generation of surveys, including light curves, time-delays, and a set of significantly improved radius-luminosity relations for use with high-redshift populations.

McDougall, Hugh [Queensland U.]↗
DOE OSTI2022

Anodic Interfacial Evolution in Extremely Fast Charged Lithium-Ion Batteries

Interfacial reaction mechanisms at the anode/separator interface play a central role in the performance and safety of lithium-ion batteries during fast charging. We report a mechanistic study on the evolution and interactions of the aging mechanisms at the anode/separator interface in lithium cobalt oxide/graphite pouch cells charged with variable charging rates (1–6C) over 10 cycles. In situ electrochemical measurements, including voltage relaxation, Coulombic efficiency, and direct current internal resistance, indicated an incremental lithium loss until the C rates were ≤5C. A substantial capacity fade is observed in the first few cycles of fast charging, but the magnitude of capacity fade progressively diminishes with the number of cycles, indicating a suppression in the lithium deposition mechanism. Post-mortem film thickness, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) analyses were performed to elucidate the evolution of electrolyte decomposition, the solid–electrolyte interface (SEI), lithium plating, and film fracture mechanisms with C rate. XPS measurements confirmed an increasing lithium concentration in an SEI film with an increase in the C rate. SEM images showed a growth of dendritic lithium on the anode surface from 1C to 3C. Precrack formation leading to an interfacial film fracture was observed at higher C rates. Furthermore, a differential analysis of the discharge capacity indicated a possible two-phase delithiation from the anode and reduced cathodic lithiation due to lithium loss at high C rates.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molten Sodium Penetration in NaSICON Electrolytes at 0.1 A cm –2

High-conductivity solid electrolytes, such as the Na superionic conductor, NaSICON, are poised to play an increasingly important role in safe, reliable battery-based energy storage, enabling advanced sodium-based batteries. Coupled demands of increased current density (≥0.1 A cm –2 ) and low-temperature (<200 °C) operation, combined with increased discharge times for long-duration storage (>12 h), challenge the limitations of solid electrolytes. Here, we explore the penetration of molten sodium into NaSICON at high current densities. Previous studies of β"-alumina proposed that Poiseuille pressure-driven cracking (mode I) and recombination of ions and electrons within the solid electrolyte (mode II) are the two main mechanisms for Na penetration, but a comprehensive study of Na penetration in NaSICON is necessary, particularly at high current density. To further understand these modes, this work employs unidirectional galvanostatic testing of Na|NaSICON|Na symmetric cells at 0.1 A cm –2 over 23 h at 110 °C. Further, while galvanostatic testing shows a relatively constant yet increasingly noisy voltage profile, electrochemical impedance spectroscopy (EIS) reveals a significant decrease in cell impedance correlated with significant sodium penetration, as observed in scanning electron microscopy (SEM). Further SEM analysis of sodium accumulation within NaSICON suggests that mode II failure may be far more prevalent than previously considered. Further, these findings suggest that total (dis)charge density (mAh cm –2 ), as opposed to current density (mA cm –2 ), may be a more critical parameter when examining solid electrolyte failure, highlighting the challenge of achieving long discharge times in batteries using solid electrolytes. Together, these results provide a better understanding of the limitations of NaSICON solid electrolytes under high current and emphasize the need for improved electrode–electrolyte interfaces.

25 ENERGY STORAGE↗
DOE OSTI2020

Pt-Assisted Carbon Remediation of Mo2C Materials for CO Disproportionation

Using the CO disproportionation (Boudouard) reaction as a probe reaction, an in-depth analysis of temperature-programmed pulse response data shows that the addition of Pt to Mo2C mitigates deactivation of Mo active sites by acting as a carbon collector. CO2 production on Mo2C and Pt/Mo2C materials is dependent on both the activation energy and the CO surface concentration. Detailed plane-wave density functional theory calculations of the CO adsorption and disproportion reactions on Mo2C-supported Pt nanoparticles (NPs) are reported. The Mo2C was modeled by the ß-Mo2C (100) surface, and the Pt/Mo2C interface was modeled by the addition of 12 Pt atoms to the Mo2C (100) surface (12Pt@Mo2C). The potential energy surfaces of the Boudouard reaction were calculated on pure Mo2C, 12Pt@Mo2C, and Pt (111) surfaces. CO dissociation readily occurs on the Mo2C (100) surface, but not on the Pt (111) surface, with the former being exothermic and the latter being endothermic. At the Pt/Mo2C interface, CO dissociation is still exothermic, but with a larger energy barrier. The Boudouard reaction takes place on the Mo2C region, where CO2 is formed from a surface O atom dissociated from one CO molecule in reaction with another CO molecule, leaving one C atom on the surface. C adsorption is preferential on the Pt site in comparison to the Mo site. The supported Pt domains can collect the remaining C atoms, facilitating further CO2 formation on the active Mo sites. A Bader charge analysis shows that the surface metal-carbon bond is a mixture of covalent and ionic bonds, whereas the surface metal-oxygen bond is ionic. Electron localization function (ELF) and partial charge density calculations agree well with the Bader charge analysis. These computational results are consistent with experimental observations of the interaction of CO with Mo2C nanotube supported Pt domains in the transient regime under far from equilibrium conditions. The Boudouard reaction is an important side reaction, and the unexpected role found for Pt as a carbon collector, with Mo serving as a disproportionation site, provides a unique vantage point for understanding carbon and coke formation on catalytic materials.

Pt-assisted carbon remediation, Pt/Mo2C interface,↗
DOE OSTI2025

Elucidating Gas Reduction Effects of Organosilicon Additives in Lithium-Ion Batteries

Lithium-ion batteries (LIBs) with nonaqueous liquid electrolytes are prone to gas generation at elevated voltages and temperatures, degrading battery performance and posing serious safety risks. Organosilicon (OS) additives are an emerging candidate solution for gassing problems in LIBs, but a detailed understanding of their functional mechanisms remains elusive. In this work, we present a combined computational and experimental study to elucidate the gasreducing effects of OS additives. Cell volume measurements and gas chromatography–mass spectrometry reveal that OS additives can substantially reduce gas evolution in LIBs, particularly CO 2 regardless of source. Through density functional theory calculations, we identify multiple plausible pathways for CO 2 evolution, including (1) nucleophile-induced ring-opening of ethylene carbonate (EC) and the subsequent electro-oxidation and (2) direct electro-oxidation of lithium carbonate (Li 2 CO 3 ). Correspondingly, we find that OS additives function via two primary mechanisms: (1) scavenging of nucleophiles such as superoxide (O 2 •– ), peroxide (O 2 2– ), and carbonate ion (CO 3 2– ); (2) oligomerization with ethylene carbonate oxide ion and ethylene dicarbonate ion. Moreover, we discover that OS additives possess strong lithium coordination affinity, which helps further reduce the nucleophilic reaction energies and hence increases their nucleophile-scavenging efficiency. Finally, we provide a mechanistic interpretation for the enhanced gasreduction effects observed with fluorinated OS compounds, corroborated by surface analysis results from X-ray photoelectron spectroscopy. Our study offers the first molecular-level insights into how OS additives contribute to reduced gas formation in LIBs, paving the way for improved safety and performance of LIBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Activation of Semicore Electrons in Alkali Metals and Their Role in the B1–B2 Phase Transition under Pressure

Alkali fluorides are often thought of as archetypical ionic compounds whose structures can be understood in terms of the packing of rigid spheres. At ambient pressure, they assume the rocksalt (B1) structure, while under only a few GPa of pressure, the cesium chloride (B2) structure, with higher coordination numbers, is assumed for KF, RbF, and CsF. NaF requires almost 10 times more pressure to undergo this same phase transition, which has not been observed for LiF. Herein, we provide a detailed analysis, based upon quantum chemical calculations, explaining this behavior. We show that for the heavier alkali metals, the semicore p orbitals engage in metal-metal bonding in the B2 phase, facilitating the pressure-induced B1 → B2 structural transition. Furthermore, these findings suggest that the semicore orbitals of heavy alkali metals can be activated without the need of strong oxidants at very mild levels of compression, resulting in the formation of chemical bonds, challenging both traditional and modern core-valence distinctions. In addition, we argue that Cs 5p-5p bonding in CsCl occurs already at ambient pressure, stabilizing the B2 phase, and suggest experiments that may be able to detect signatures of such bonding.

Anions↗
DOE OSTI2025

Quantifying UAS Observation Error Variance Used in Data Assimilation Systems and Its Impact on Predictive Skill

Observation error determines the weights of the observations and background state used in data assimilation to generate analyses. Quantifying observation error is critical for the optimal assimilation of observational data sets. Uncrewed Aircraft System (UAS) observations have shown potential benefits in filling observational gaps in the lower atmosphere; however, characterization of their error characteristics has been limited. To optimize the use of UAS observations in numerical weather prediction, UAS observation error is estimated based on the 3‐cornered hat diagnostic approach which uses three independent estimates of the atmospheric state. This approach is applied to data from the 2018 Lower Atmospheric Profiling Studies at Elevation‐a Remotely‐piloted Aircraft Team Experiment field campaign using collocated UAS and rawinsonde observations along with output from a set of convection‐permitting model simulations. The estimated observation error values for UAS temperature, wind, and relative humidity measurements were found to be only weakly dependent on height AGL with mean values equal to 0.5°C, 0.8 m s −1 , and 3%, respectively. Only the newly estimated observation error for temperature differed from that previously used to assimilate commercial aircraft observations into global models (1.0°C). However, using this reduced temperature observation error produced more accurate mesoscale analyses and forecasts of both terrain‐driven flows and convection initiation generated by colliding outflow boundaries within the San Luis Valley of Colorado.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Investigating Characteristic Droplet Size Distributions in Large Eddy Simulations of Stratocumulus Clouds

Cloud processes relevant to radiative and precipitation properties depend on the shape of the cloud droplet size distribution. Recent holographic observations revealed that cloud droplet populations do not have the same size distribution shapes throughout but form regions of characteristic distributions with similar microphysical properties. We investigate the existence and properties of these characteristic distributions within Large‐Eddy Simulations of stratocumulus clouds using Lagrangian and bin microphysics schemes. Distribution types are identified, revealing localized characteristic distributions that vary on the scale of the largest convective cell for simulations with bin microphysics. The results from the Lagrangian microphysics scheme hint at similar behavior. Compared to observations, the simulated clouds are much more uniform. Analysis of the LES results suggests a connection to the local entrainment rate, so the poorly resolved entrainment interface in LES may be a cause of the uniformity. The uniformity of the large‐scale forcing could also be a factor.

cloud droplet size distributions↗
DOE OSTI2021

DNA origami single crystals with Wulff shapes

DNA origami technology has proven to be an excellent tool for precisely manipulating molecules and colloidal elements in a three-dimensional manner. However, fabrication of single crystals with well-defined facets from highly programmable, complex DNA origami units is a great challenge. Here, we report the successful fabrication of DNA origami single crystals with Wulff shapes and high yield. By regulating the symmetries and binding modes of the DNA origami building blocks, the crystalline shapes can be designed and well-controlled. The single crystals are then used to induce precise growth of an ultrathin layer of silica on the edges, resulting in mechanically reinforced silica-DNA hybrid structures that preserve the details of the single crystals without distortion. The silica-infused microcrystals can be directly observed in the dry state, which allows meticulous analysis of the crystal facets and tomographic 3D reconstruction of the single crystals by high-resolution electron microscopy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Multiscale modeling of metal-hydride interphases—quantification of decoupled chemo-mechanical energies

Abstract The quantification of interphase properties between metals and their corresponding hydrides is crucial for modeling the thermodynamics and kinetics of the hydrogenation processes in solid-state hydrogen storage materials. In particular, interphase boundary energies assume a pivotal role in determining the kinetics of nucleation, growth, and coarsening of hydrides, alongside accompanying morphological evolution during hydrogenation. The total interphase energy arises from both chemical bonding and mechanical strains in these solid-state systems. Since these contributions are usually coupled, it is challenging to distinguish via conventional computational approaches. Here, a comprehensive atomistic modeling methodology is developed to decouple chemical and mechanical energy contributions using first-principles calculations, of which feasibility is demonstrated by quantifying chemical and elastic strain energies of key interfaces within the FeTi metal-hydride system. Derived materials parameters are then employed for mesoscopic micromechanical analysis, predicting crystallographic orientations in line with experimental observations. The multiscale approach outlined verifies the importance of the chemo-mechanical interplay in the morphological evolution of growing hydride phases, and can be generalized to investigate other systems. In addition, it can streamline the design of atomistic models for the quantitative evaluation of interphase properties between dissimilar phases and allow for efficient predictions of their preferred phase boundary orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Isothermal solidification for high-entropy alloy synthesis

Kinetically trapping the high-temperature states through rapid cooling solidification is widely used for the synthesis of high-entropy alloys (HEAs), especially those with intrinsically immiscible elemental combinations. However, strategies need to be developed to overcome the fundamental limitations of rapid cooling solidification in controlling the crystallinity, structure and morphology of HEAs. Here, in this study, we introduce an isothermal solidification strategy for the synthesis of HEAs by rapidly altering the metal alloy composition through liquid–liquid interface reactions at low temperatures, for example, from 25 °C to 80 °C. We use gallium (Ga)-based metal as the sacrificial reagent and mixing medium. By directing the reactions to the interfaces between the Ga-based liquid metal and an aqueous metal ion solution, the foreign metal ions can be reduced at the interfaces and incorporated into the liquid metal quickly. HEAs with various crystallinity (single crystal, mesocrystal, polycrystal and amorphous), morphology (zero, two and three dimensions) and compositions can be achieved through the isothermal solidification. Ga can be completely consumed, resulting in Ga-free HEAs. If desired, Ga can be one of the metal elements in the final products. In situ liquid phase transmission electron microscopy (TEM) studies and theoretical analysis show the isothermal solidification mechanisms. Our direct observations show the enhanced mixing of liquid metal elements and the solidification process with fluctuating nucleation dynamics. The isothermal solidification marks a powerful strategy for HEA synthesis through an unexplored pathway of kinetically trapping the high-entropy states.

Zhang, Qiubo [Lawrence Berkeley National Laborator↗
DOE OSTI2022

Unusual aliovalent doping effects on oxygen non-stoichiometry in medium-entropy compositionally complex perovskite oxides

Aliovalent doping of perovskite oxides can tune the oxygen vacancy formation energy. This work discovers normal vs. abnormal aliovalent doping effects on redox behaviors in medium-entropy compositionally complex perovskite oxides (CCPOs) (La 1–x Sr x )(Mn 1/3 Fe 1/3 Ti 1/3 )O 3–δ (LS_MFT) vs. (La 1–x Sr x )(Mn 1/3 Fe 1/3 Cr 1/3 )O 3–δ (LS_MFC). In the LS_MFC series, the oxygen non-stoichiometry range Δδ (= δ red – δ ox ) linearly depends on the Sr molar ratio x, while the LS_MFT series shows a V-shape dependence of Δδ on x. This unusual observation is investigated and explained based on the analysis of the energy loss near edge structure (ELNES) in STEM electron energy loss spectroscopy, along with density functional theory (DFT) calculations. In LS_MFC, Cr–L 2,3 , Mn–L 2,3 and Fe–L 2,3 peaks have a similar linear shift to higher energy with increasing x, which indicates higher oxidation states of Cr, Mn, and Fe with lower oxygen vacancy formation energies. In LS_MFT, the V-shape of the Δδ vs. x curve is caused by the stable Ti 4+ state and a V-shape Mn/Fe valency dependence on x. Furthermore, this study suggests the possible existence of different (including unexpected) coupled aliovalent doping effects in CCPOs with multiple B-site redox active elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Jet Drift in Heavy-Ion Collision: Acoplanarity and v 2

We introduce a sub-eikonal anisotropic contribution to jet-broadening, “jet drift,” that couples to the flow of the nuclear medium, showing that this effect results in a deflection of hard partons, and thus jets, in the direction of the medium flow. We study two-jet observables, i.e. v 2 and acoplanarity for √s = 5.02 TeV PbPb collisions at the LHC. We show that jet drift leads to an enhancement of the elliptic flow (v 2 ) of charged hadrons and modification of the acoplanarity of dihadrons and discuss the implications for jet substructure and medium response effects. We also demonstrate that we can obtain independent information about the event geometry encoded in the drift modification to acoplanarity vs v 2 enhancement, whereas the temperature dependence of these observables is qualitatively different. By disentangling this temperature vs geometry dependence of these observables, we can add discriminatory power to our analysis. Next, we study acoplanarity and v 2 across different system sizes and collisional energies i.e. 200 GeV AuAu collision at RHIC using our in-house simulation package (APE). Our analysis will be critical for understanding and generalizing dynamical jet-QGP interactions for different collisional systems and energies which will aid event engineering applications in the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Hot carrier relaxation and inhibited thermalization in superlattice heterostructures: The potential for phonon management

One of the main loss mechanisms in photovoltaic solar cells is the thermalization of photogenerated hot carriers via phonon-mediated relaxation. By inhibiting these relaxation mechanisms and reducing thermalization losses, it may be possible to improve the power conversion efficiency of solar cells beyond the single gap limit. Here, type-II InAs/AlAsSb multi-quantum well (MQW) structures are investigated to study the impact of the phononic properties of the AlAsSb barrier material in hot carrier thermalization. Experimental and theoretical results show that by increasing the barrier thickness (increasing the relative contribution of AlAsSb content in the superlattices), the relaxation of hot carriers is reduced as observed in power-dependent photoluminescence and thermalization analysis. Furthermore, this is attributed to an increase in the phononic bandgap of the MQW with increasing AlAsSb composition reducing the efficiency of the dominant Klemens mechanism as the phononic properties shift toward a more AlSb-like behavior.

14 SOLAR ENERGY↗
DOE OSTI2025

Exploring how urban form and demographics are linked with pedestrian and bicycle safety

With pedestrian and bicycle safety as the focus, this study investigates the role of urban form, burdened communities (BCs), and demographics at the national level. Urban form can contribute to segregation, limiting access to crucial resources such as safe infrastructure, essential services, and economic opportunities. Leveraging recent data, this research applies six key indicators to identify BCs based on various socioeconomic and environmental factors. Here, the study creates a unique database combining 10 years of pedestrian-bicycle-involved fatal crashes with data for the 71,729 census tracts with burden indicators and census data. The data are analyzed using descriptives and rigorous zero-hurdle negative binomial models, which account for excessive zeros observed in the data. The inference-based analysis results reveal a positive correlation between burden indicators and pedestrian-bicycle-involved fatal crash occurrences, alongside a heightened risk in areas with high-intensity development. Higher Black, American Indian, or Alaska Native populations are associated with more fatal crashes. The study offers novel insights into safety dynamics across different contexts characterized by urban forms, BCs, and demographics. The study underscores the importance of targeted interventions to enhance pedestrian and bicycle safety.

bicycle crashes↗
DOE OSTI2020

Ultrafast molecular frame electronic coherences from lab frame scattering anisotropies

Electronic coherences in molecules are ultrafast charge oscillations on the molecular frame (MF) and their direct observation and separation from electronic population dynamics is challenging. Here we present a valence shell lab frame (LF) scattering method suited to probing electronic coherences in isolated systems. MF electronic coherences lead to LF electronic anisotropies observable by ultrafast angle-resolved scattering. Moment analysis of the LF anisotropy completely separates electronic coherences from population dynamics, demonstrated in excited state NH 3 using ultrafast time-energy-angle-resolved photoelectron spectroscopy. Overall, this general approach applies equally to attosecond/femtosecond electronic coherences in isolated systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Automatic Detection and Classification of Radio Galaxy Images by Deep Learning

Abstract Surveys conducted by radio astronomy observatories, such as SKA, MeerKAT, Very Large Array, and ASKAP, have generated massive astronomical images containing radio galaxies (RGs). This generation of massive RG images has imposed strict requirements on the detection and classification of RGs and makes manual classification and detection increasingly difficult, even impossible. Rapid classification and detection of images of different types of RGs help astronomers make full use of the observed astronomical image data for further processing and analysis. The classification of FRI and FRII is relatively easy, and there are more studies and literature on them at present, but FR0 and FRI are similar, so it is difficult to distinguish them. It poses a greater challenge to image processing. At present, deep learning has made breakthrough progress in the field of image analysis and processing and has preliminary applications in astronomical data processing. Compared with classification algorithms that can only classify galaxies, object detection algorithms that can locate and classify RGs simultaneously are preferred. In target detection algorithms, YOLOv5 has outstanding advantages in the classification and positioning of small targets. Therefore, we propose a deep-learning method based on an improved YOLOv5 object detection model that makes full use of multisource data, combining FIRST radio with SDSS optical image data, and realizes the automatic detection of FR0, FRI, and FRII RGs. The innovation of our work is that on the basis of the original YOLOv5 object detection model, we introduce the SE Net attention mechanism, increase the number of preset anchors, adjust the network structure of the feature pyramid, and modify the network structure, thereby allowing our model to demonstrate galaxy classification and position detection effects. Our improved model produces satisfactory results, as evidenced by experiments. Overall, the mean average precision (mAP@0.5) of our improved model on the test set reaches 89.4%, which can determine the position (R.A. and decl.) and automatically detect and classify FR0s, FRIs, and FRIIs. Our work contributes to astronomy because it allows astronomers to locate FR0, FRI, and FRII galaxies in a relatively short time and can be further combined with other astronomically generated data to study the properties of these galaxies. The target detection model can also help astronomers find FR0s, FRIs, and FRIIs in future surveys and build a large-scale star RG catalog. Moreover, our work is also useful for the detection of other types of galaxies.

Astronomy & Astrophysics↗