Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Modification of the Alfvén wave spectrum by pellet injection

Alfvén eigenmodes driven by energetic particles are routinely observed in tokamak plasmas. These modes consist of poloidal harmonics of shear Alfvén waves coupled by inhomogeneity in the magnetic field. In this work, further coupling is introduced by 3D inhomogeneities in the ion density during the assimilation of injected pellets. This additional coupling modifies the Alfvén continuum and discrete eigenmode spectrum. We find that the frequencies of Alfvén eigenmodes drop dramatically when a pellet is injected in JET. From these observations, information about the changes in the ion density caused by a pellet can be inferred. To use Alfvén eigenmodes for MHD spectroscopy of pellet injected plasmas, the 3D MHD codes Stellgap and AE3D were generalised to incorporate 3D density profiles. Additionally, a model for the expansion of the ionised pellet plasmoid along a magnetic field line was derived from the fluid equations. Thereby, the time evolution of the Alfvén eigenfrequency is reproduced. By comparing the numerical frequency drop of a toroidal Alfvén eigenmode (TAE) to experimental observations, the initial ion density of a cigar-shaped ablation region of length 4 cm is estimated to be n * =6.8×10 22 m -3 at the TAE location (r/a≈0.75). The frequency sweeping of an Alfvén eigenmode ends when the ion density homogenises poloidally. Modelling suggests that the time for poloidal homogenisation of the ion density at the TAE position is τ h =18±4 ms for inboard pellet injection, and τ h =26±2 ms for outboard pellet injection. By reproducing the frequency evolution of the elliptical Alfvén eigenmode (EAE), the initial ion density at the EAE location (r/a≈0.9) can be estimated to be n * =4.8×10 22 m -3 . Poloidal homogenisation of the ion density takes 2.7 times longer at the EAE location than at the TAE location for both inboard and outboard pellet injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1983

Correlation of compressive stress with spalling of plasma sprayed ceramic materials

Ceramics on metal substrates for potential use as high temperature seals or other applications are exposed to forces originating from differences in thermal expansion between the ceramic and the metal substrate. This report develops a relationship between the difference in expansion of the ceramic and the substrate, defines conditions under which shear between the ceramic and the substrate occurs, and those under which bending forces are produced in the ceramic. The off-axis effect of compression forces resulting from high temperature plastic flow of the ceramic producing buckling of the ceramic is developed. Shear is associated with the edge or boundary stresses on the component while bending is associated with the distortion of an interior region. Both modes are significant in predicting life of the ceramic.

Mullen, R. L.↗
NASA NTRS1983

Correlation of compressive and shear stress with spalling of plasma-sprayed ceramic materials

Ceramics on metal substrates for potential use as high temperature seals or other applications are exposed to forces originating from differences in thermal expansion between the ceramic and the metal substrate. This report develops a relationship between the difference in expansion of the ceramic and the substrate, defines conditions under which shear between the ceramic and the substrate occurs, and those under which bending forces are produced in the ceramic. The off-axis effect of compression forces resulting from high temperature plastic flow of the ceramic producing buckling of the ceramic is developed. Shear is associated with the edge or boundary stresses on the component while bending is associated with the distortion of an interior region. Both modes are significant in predicting life of the ceramic. Previously announced in STAR as N83-27016

Mullen, R. L.↗
DOE OSTI2023

Cellulose synthase-like D movement in the plasma membrane requires enzymatic activity

Cellulose Synthase-Like D (CSLD) proteins, important for tip growth and cell division, are known to generate β-1,4-glucan. However, whether they are propelled in the membrane as the glucan chains they produce assemble into microfibrils is unknown. To address this, we endogenously tagged all eight CSLDs in Physcomitrium patens and discovered that they all localize to the apex of tip-growing cells and to the cell plate during cytokinesis. Actin is required to target CSLD to cell tips concomitant with cell expansion, but not to cell plates, which depend on actin and CSLD for structural support. Like Cellulose Synthase (CESA), CSLD requires catalytic activity to move in the plasma membrane. We discovered that CSLD moves significantly faster, with shorter duration and less linear trajectories than CESA. In contrast to CESA, CSLD movement was insensitive to the cellulose synthesis inhibitor isoxaben, suggesting that CSLD and CESA function within different complexes possibly producing structurally distinct cellulose microfibrils.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Laser propagation in a subcritical foam: Subgrid model

Here, we present a subgrid model for laser propagation in a subcritical foam. Our model describes the expansion of laser-irradiated foam elements that are below the resolution of the simulation grid and predicts the plasma conditions that result from burning down the foam. Our model can be included as a module within a larger multiphysics code, and we have implemented it within the code pF3D, which is used for simulating a laser-plasma interaction. The model predicts a reduced propagation velocity for a laser through a subcritical foam compared to simulating that foam as a homogeneous gas. This is attributed to the laser energy that goes into burning down the foam microstructure. We compare our model against experimental data by simulating a 2 mg/cc SiO 2 foam shot performed at the Janus laser facility at the Lawrence Livermore National Laboratory. pF3D simulations with the foam model predict hot ion temperatures. This leads to a reduction in the level of stimulated Brillouin scattering (SBS), bringing the simulated level of SBS into agreement with the data. Intensity fluctuations at the foam front due to laser speckles and refraction result in ion temperature fluctuations when the foam burns down. These drive long-lived electron density fluctuations on scales that are large compared to the pore size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

PlasMod0 v.1.0

SAND2022-12609 O PlasMod0 is a 0-dimensional plasma modeling which approximates a plasma as a well-stirred reactor. The model uses two temperatures, one for electrons and one for ions and neutrals. This model was originally developed for laser produced plasma in single-particle aerosol mass spectrometers. As a result, there are some specialized capabilities that include spherical expansion into vacuum at a user-specified rate and photon reactions. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Lietz, Amanda↗
DOE OSTI2019

Theory of the Drift-Wave Instability at Arbitrary Collisionality

We introduce a framework, based on the expansion of the distribution function on a Hermite- Laguerre polynomial basis, to study the effects of collisions on magnetized plasma instabilities at arbitrary mean-free path. Focusing on the drift-wave instability, we show that our framework allows retrieving established collisional and collisionless limits. At the intermediate collisionalities relevant for present and future magnetic nuclear fusion devices, deviations with respect to collision operators used in state-of-the-art turbulence simulation codes show the need for retaining the full Coulomb operator in order to obtain both the correct instability growth rate and eigenmode spectrum, with potentially important implications to the understanding of plasma turbulence. The exponential convergence of the spectral representation that we propose makes the representation of the velocity space dependence, including the full collision operator, optimally efficient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1971

Structure of the plasma fireball produced by a CO2 laser.

Study of the space and time resolved structure of a helium plasma produced with a repetitive CO2 laser during the first 15 microsec of the afterglow period. The spectra of several neutral and ionized helium lines are used in the determination of the density and temperature profiles of the luminous fireball. It is found that the plasma is comprised of a dense hot core, which emits primarily ionic lines, and a well-defined tenuous outer shell, which is primarily the source of neutral emission lines. This ?two-component' plasma structure develops at about 0.4 microsec after breakdown, at about the time when the luminous fireball dissipates its expansion energy and comes to a virtual standstill.

George, E. V.↗
NASA NTRS1976

The role of Coulomb collisions in limiting differential flow and temperature differences in the solar wind

Data obtained by OGO 5 are used to confirm IMP 6 observations of an inverse dependence of the helium-to-hydrogen temperature ratio in the solar wind on the ratio of solar-wind expansion time to the Coulomb-collision equipartition time. The analysis is then extended to determine the relation of the difference between the hydrogen and helium bulk velocities (the differential flow vector) with the ratio between the solar-wind expansion time and the time required for Coulomb collisions to slow down a beam of ions passing through a plasma. It is found that the magnitude of the differential flow vector varies inversely with the time ratio when the latter is small and approaches zero when it is large. These results are shown to suggest a model of continuous preferential heating and acceleration of helium (or cooling and deceleration of hydrogen), which is cancelled or limited by Coulomb collisions by the time the plasma has reached 1 AU. Since the average dependence of the differential flow vector on the time ratio cannot explain all the systematic variations of the vector observed in corotating high-velocity streams, it is concluded that additional helium acceleration probably occurs on the leading edge of such streams.

Neugebauer, M.↗
NASA NTRS1993

Pseudobreakup and substorm growth phase in the ionosphere and magnetosphere

Observations made during the growth phase and the onset of a substorm on August 31, 1986 are presented. About 20 min after the epsilon parameter at the magnetopause had exceeded 10 exp 11 W, magnetic field dipolarization with an increase of energetic particle fluxes was observed by the AMPTE Charge Composition Explorer (CCE) spacecraft at the geocentric distance of 8.7 R(E) close to magnetic midnight. The event exhibited local signatures of a substorm onset at AMPTE CCE and a weak wedgelike current system in the midnight sector ionosphere, but did not lead to a full-scale substorm expansion; neither did it produce large particle injections at GEO. Only after another 20 min of continued growth phase could the entire magnetosphere-ionosphere system allow the onset of a regular substorm expansion. The initial activation is interpreted as a 'pseudobreakup'. We examine the physical conditions in the near-Earth plasma sheet and analyze the development in the ionosphere using ground-based magnetometers and electric field observations from the STARE radar.

Koskinen, H. E. J.↗
DOE OSTI2017

Experimental studies of the magnetic structure and plasma dynamics in current sheets (a review)

Based on measurements of magnetic fields in current sheets, spatial distributions of the electric current and electrodynamic forces in successive stages of the sheet evolution are determined. Two new effects manifesting themselves mostly in the late stages of the current sheet evolution have been discovered, namely, expansion of the current flow region at the periphery of the sheet and the appearance of a region with inverse currents, which gradually expands from the periphery toward the center of the sheet. Using spectroscopic methods, generation of superthermal plasma flows accelerated along the sheet width from the center toward the periphery has been revealed and investigated. The measured energies of accelerated plasma ions satisfactorily agree with the Ampère forces determined from magnetic measurements. The excitation of inverse currents additionally confirms the motion of high-speed plasma flows from the center of the current sheet toward its side edges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

A simulation study of interactions of space-shuttle generated electron beams with ambient plasma and neutral gas

The objective was to conduct large scale simulations of electron beams injected into space. The study of the active injection of electron beams from spacecraft is important, as it provides valuable insight into the plasma beam interactions and the development of current systems in the ionosphere. However, the beam injection itself is not simple, being constrained by the ability of the spacecraft to draw current from the ambient plasma. The generation of these return currents is dependent on several factors, including the density of the ambient plasma relative to the beam density, the presence of neutrals around the spacecraft, the configuration of the spacecraft, and the motion of the spacecraft through the plasma. Two dimensional (three velocity) particle simulations with collisional processes included are used to show how these different and often coupled processes can be used to enhance beam propagation from the spacecraft. To understand the radial expansion mechanism of an electron beam injected from a highly charged spacecraft, two dimensional particle-in-cell simulations were conducted for a high density electron beam injected parallel to magnetic fields from an isolated equipotential conductor into a cold background plasma. The simulations indicate that charge build-up at the beam stagnation point causes the beam to expand radially to the beam electron gyroradius.

Winglee, Robert M.↗
DOE OSTI2015

Plasma-gun-assisted field-reversed configuration formation in a conical θ-pinch

We show through injection of plasma via an annular array of coaxial plasma guns, during the pre-ionization phase of field-reversed configuration (FRC) formation how to catalyze the bulk ionization of a neutral gas prefill in the presence of a strong axial magnetic field and change the character of outward flux flow during field-reversal from a convective process to a much slower resistive diffusion process. Our approach has been found to significantly improve FRC formation in a conical θ-pinch, resulting in a ~350% increase in trapped flux at typical operating conditions, an expansion of accessible formation parameter space to lower densities and higher temperatures, and a reduction or elimination of several deleterious effects associated with the pre-ionization phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Erratum: “Accurate modeling of the hose instability in plasma wakefield accelerators” [Phys. Plasmas 25, 056703 (2018)]

Here, we would like to correct a typographical error which was introduced in Eqs. (5), (11), (14), (20a), and (20b) during revision of Ref. 1. The series expansion of the plasmaelectron phase space density to the first order of ⟨x⟩ and ⟨px⟩ [Eq. (5) in Ref. 1] correctly reads f p ≈ f p 0 - cos θ (⟨x⟩∂r+ ⟨px⟩∂pr)f p,0 The zeroth-order term, f p,0 , was not printed in Ref. 1. Accordingly, the correct expansion of the wakefield potential [Eq. (11) in Ref. 1] is ψ(r,θ) ≈ ψ0(r) -cos θ X p ∂ r ψ 0 (r), the correct expansion of the source term of the wakefield potential [Eq. (14) in Ref. 1] is S(r, θ) ≈ S 0 (r) - cos θ X p ∂ r S 0 (r), and the correct expansions of the force terms [Eqs. (20a) and (20b) in Ref. 1] are F r,b ≈ F r,b,o - cos θ X b ∂ r Fr,b,0, F r,b ≈ F r,p,o - cos θ ⟨x⟩ ∂ r F r,p,0 , The zeroth order terms in Eqs. (5), (11), (14), (20a), and (20b) are missing in the printing of Ref. 1 but were fully taken into account for the calculation of all derived equations of the mathematical model. The developed mathematical model and physical conclusions in Ref. 1 are therefore all unaltered by, and consistent with, the above corrections.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Direct stellarator coil optimization for nested magnetic surfaces with precise quasi-symmetry

We present a robust optimization algorithm for the design of electromagnetic coils that generate vacuum magnetic fields with nested flux surfaces and precise quasi-symmetry. The method is based on a bilevel optimization problem, where the outer coil optimization is constrained by a set of inner least squares optimization problems whose solutions describe magnetic surfaces. The outer optimization objective targets coils that generate a field with nested magnetic surfaces and good quasi-symmetry. The inner optimization problems identify magnetic surfaces when they exist, and approximate surfaces in the presence of magnetic islands or chaos. We show that this formulation can be used to heal islands and chaos, thus producing coils that result in magnetic fields with precise quasi-symmetry. We show that the method can be initialized with coils from the traditional two-stage coil design process, as well as coils from a near-axis expansion optimization. We present a numerical example where island chains are healed and quasi-symmetry is optimized up to surfaces with aspect ratio 6. Another numerical example illustrates that the aspect ratio of nested flux surfaces with optimized quasi-symmetry can be decreased from 6 to approximately 4. In conclusion, the last example shows that our approach is robust and a cold-start using coils from a near-axis expansion optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Covariant formulation of spatially non-symmetric kinetic equilibria in magnetized astrophysical plasmas

Astrophysical plasmas in the surrounding of compact objects and subject to intense gravitational and electromagnetic fields are believed to give rise to relativistic regimes. Theoretical and observational evidences suggest that magnetized plasmas of this type are collisionless and can persist for long times (e.g., with respect to a distant observer, coordinate, time), while exhibiting geometrical structures characterized by the absence of well-defined spatial symmetries. In this paper, the problem is posed whether such configurations can correspond to some kind of kinetic equilibrium. The issue is addressed from a theoretical perspective in the framework of a covariant Vlasov statistical description, which relies on the method of invariants. For this purpose, a systematic covariant variational formulation of gyrokinetic theory is developed, which holds without requiring any symmetry condition on the background fields. As a result, an asymptotic representation of the relativistic particle magnetic moment is obtained from its formal exact solution, in terms of a suitably defined invariant series expansion parameter (perturbative representation). On such a basis, it is shown that spatially non-symmetric kinetic equilibria can actually be determined, an example being provided by Gaussian-like distributions. As an application, the physical mechanisms related to the occurrence of a non-vanishing equilibrium fluid 4-flow are investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Theory of the Drift-Wave Instability at Arbitrary Collisionality

A numerically efficient framework that takes into account the effect of the Coulomb collision operator at arbitrary collisionalities is introduced. Such a model is based on the expansion of the distribution function on a Hermite-Laguerre polynomial basis to study the effects of collisions on magnetized plasma instabilities at arbitrary mean-free path. Focusing on the drift-wave instability, we show that our framework allows retrieving established collisional and collisionless limits. At the intermediate collisionalities relevant for present and future magnetic nuclear fusion devices, deviations with respect to collision operators used in state-of-the-art turbulence simulation codes show the need for retaining the full Coulomb operator in order to obtain both the correct instability growth rate and eigenmode spectrum, which, for example, may significantly impact quantitative predictions of transport. In conclusion, the exponential convergence of the spectral representation that we propose makes the representation of the velocity space dependence, including the full collision operator, more efficient than standard finite difference methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1988

Description of substorms in the tail incorporating boundary layer and neutral line effects

A description of the substorm expansion phase that includes the formation of a neutral line in the relatively near-earth portion of the tail plasma sheet and phenomena observed in the plasma sheet boundary layer (PSBL) is proposed. Specifically, it is proposed that substorm onset results from the formation of a neutral line within the preexisting source region for the PSBL. The source region is presumably the tail current sheet, which is suggested to extend well earthward of 80 earth radii. Both before and after the neutral line forms, auroral field-aligned currents and large ion flows remain confined to the PSBL earthward of the source region.

Lyons, L. R.↗