Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reflectance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

UNAMBIGUOUS DETECTION OF REFLECTION IN MAGNETIC CATACLYSMIC VARIABLES: JOINT NuSTAR–XMM-NEWTON OBSERVATIONS OF THREE INTERMEDIATE POLARS

In magnetic cataclysmic variables (CVs), X-ray emission regions are located close to the white dwarf surface, which is expected to reflect a significant fraction of intrinsic X-rays above 10 keV, producing a Compton reflection hump. However, up to now, a secure detection of this effect in magnetic CVs has largely proved elusive because of the limited sensitivity of non-imaging X-ray detectors. Here we report our analysis of joint NuSTAR–XMM-Newton observations of three magnetic CVs, V709 Cas, NY Lup, and V1223 Sgr. The improved hard X-ray sensitivity of the imaging NuSTAR data has resulted in the first robust detection of Compton hump in all three objects, with amplitudes of ∼1 or greater in NY Lup, and likely <1.0 in the other two. We also confirm earlier reports of a strong spin modulation above 10 keV in V709 Cas, and we report the first detection of small spin amplitudes in the others. We interpret this as due to different height of the X-ray emitting region among these objects. A height of ∼0.2 white dwarf radii provides a plausible explanation for the low reflection amplitude of V709 Cas. Since emission regions above both poles are visible at certain spin phases, this can also explain the strong hard X-ray spin modulation. A shock height of ∼0.05 white dwarf radii can explain our results on V1223 Sgr, while the shock height in NY Lup appears negligible.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ laser reflectivity to monitor and control the nucleation and growth of atomically thin 2D materials*

The growth of atomically thin two-dimensional (2D) layered and other quantum materials is typically performed without in situ monitoring or control. Here, a simple laser reflectivity approach is demonstrated to provide in situ control over sub-monolayer thickness and growth kinetics during pulsed laser deposition (PLD) of MoSe 2 layers. First, the general technique is presented with emphasis on designing the maximum sensitivity of the optical contrast through consideration of Fresnel's equations with proper choice of layer thickness, substrate, and laser monitoring wavelength, incidence angle, and laser polarization. Then the 632.8 nm optical reflectivity of MoSe 2 layers on SiO 2 /Si substrates was predicted and compared with in situ monitoring of MoSe 2 growth by PLD under actual growth conditions using a probe HeNe laser beam. The measurements showed high sensitivity and excellent agreement with MoSe 2 surface coverages calculated from atomic resolution STEM analysis of 2D layers deposited in arrested growth experiments. Finally, growth kinetics revealed by these measurements showed sigmoidal nucleation and growth stages in the formation of the 2D MoSe 2 layers that are described by a simple model, indicating the promise of the laser reflectivity technique for in situ monitoring and control of 2D materials deposition.

2D materials↗

Deep-learning-guided high-resolution subsurface reflectivity imaging with application to ground-penetrating radar data

Subsurface reflectivity imaging is one of the most important geophysical characterization methods for revealing subsurface structures. In many cases, accurate subsurface reflectivity imaging is challenging because of, for example, random or coherent noise in the data and sparse source-receiver observation geometry. Here, we develop a deep-learning-guided iterative imaging method to improve subsurface structure imaging. Specifically, we train a supervised neural network to infer a noise-free, high-resolution image from a noisy, low-resolution image and use this estimated image as guidance to regularize least-squares imaging. We develop a systematic method to generate high-quality synthetic training data (data-label pairs) to train the guidance neural network. The trained neural network can provide high-fidelity predictions even for field-data images that are not in the training data. We validate our new imaging method using one synthetic and two field ground-penetrating radar data examples, and find that our method can produce clean, high-resolution subsurface reflectivity images where existing single-pass and least-squares imaging methods fail due to noise and insufficient data coverage.

58 GEOSCIENCES↗

Enhancement of phase-conjugate reflectivity using Zeeman coherence in highly degenerate molecular systems

A comprehensive theoretical analysis is developed for the vectorial phase conjugation using resonant four-wave mixing (FWM) in a highly degenerate rotational vibrational molecular system. The dynamic Stark shifts, saturation, and Doppler broadening are included for a realistic analysis. It is shown that the electromagnetically induced multilevel coherence controls the nonlinear wave mixing yielding interesting results for the phase conjugate (PC) reflectivity. It turns out that the efficiency of the PC reflectivity is decided by the relative phase of the Zeeman coherence and the population grating. When these two contributions are aligned in phase by a small detuning of the pump frequency, a large PC reflectivity (approx20%) is obtained with moderate pump intensity (approx500 mW/cm{sup 2}).

74 ATOMIC AND MOLECULAR PHYSICS↗

Anomalous quantum reflection as a quasidynamical damping effect

We develop a quasianalytical theory for the quantum reflection amplitude of Bose-Einstein condensates. We derive and calculate the decay width of a Bose-Einstein condensate (BEC). A general relation between the time-dependent decay law of the system and its quantum reflection amplitude allows us to explain the quantum reflection anomaly of Bose-Einstein condensates present in BEC-surface systems as a direct consequence of the repulsive particle interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Total reflection, frequency, and velocity tuning in optical pulse collision in nonlinear dispersive media

The total internal reflection of a weak signal pulse from a powerful reference pulse at another frequency in a dispersive nonlinear medium is demonstrated. As a result of the two-wave collision, the signal pulse changes its frequency and group velocity, and time delay occurs. We develop both a wave and a pulse-tracing theory of the total reflection from the moving inhomogeneity induced by the optical pulse. An analytical expression for the critical value of group-velocity mismatch as a function of pump intensity and the group-velocity dispersion are obtained. The possibility of signal pulse reflection from a bright soliton in a cubic medium is considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model solution for volume reflection of relativistic particles in a bent crystal

For volume reflection process in a bent crystal, exact analytic expressions for positively- and negatively-charged particle trajectories are obtained within a model of parabolic continuous potential in each interplanar interval, with the neglect of incoherent multiple scattering. In the limit of the crystal bending radius greatly exceeding the critical value, asymptotic formulas are obtained for the particle mean deflection angle in units of Lindhard's critical angle, and for the final beam profile. Volume reflection of negatively charged particles is shown to contain effects of rainbow scattering and orbiting, whereas with positively charged particles none of these effects arise within the given model. The model predictions are compared with experimental results and numerical simulations. Estimates of the volume reflection mean angle and the final beam profile robustness under multiple scattering are performed.

43 PARTICLE ACCELERATORS↗

Femtosecond tracking of carrier relaxation in germanium with extreme ultraviolet transient reflectivity

Extreme ultraviolet (XUV) transient reflectivity around the germanium M 4,5 edge (3d core-level to valence transition) at 30 eV is advanced to obtain the transient dielectric function of crystalline germanium [100] on femtosecond to picosecond time scales following photoexcitation by broadband visible-to-infrared (VIS/NIR) pulses. By fitting the transient dielectric function, carrier-phonon induced relaxations are extracted for the excited carrier distribution. The measurements reveal a hot electron relaxation rate of 3.2±0.2ps attributed to the X-L intervalley scattering and a hot hole relaxation rate of 600±300fs ascribed to intravalley scattering within the heavy hole (HH) band, both in good agreement with previous work. An overall energy shift of the XUV dielectric function is assigned to a thermally induced band gap shrinkage by formation of acoustic phonons, which is observed to be on a timescale of 4-5 ps, in agreement with previously measured optical phonon lifetimes. The results reveal that the transient reflectivity signal at an angle of 66° with respect to the surface normal is dominated by changes to the real part of the dielectric function, due to the near critical angle of incidence of the experiment (66°-70° for the range of XUV energies used. Finally, this work provides a methodology for interpreting XUV transient reflectivity near core-level transitions, and it demonstrates the power of the XUV spectral region for measuring ultrafast excitation dynamics in solids.

74 ATOMIC AND MOLECULAR PHYSICS↗

Extending the capillary wave model to include the effect of bending rigidity: X-ray reflectivity and diffuse scattering

The surface roughness of a thin film at a liquid interface exhibits contributions of thermally excited fluctuations. This thermal roughness depends on temperature (𝑇), surface tension (𝛾), and elastic material properties, specifically the bending modulus (𝜅) of the film. A nonzero 𝜅 suppresses the thermal roughness at small length scales compared to an interface with zero 𝜅, as expressed by the power spectral density of the thermal roughness. The description of the x-ray scattering of the standard capillary wave model (CWM), which is valid for zero 𝜅, is extended to include the effect of 𝜅. The extended CWM (eCWM) provides a single analytical form for both the specular x-ray reflectivity (XRR) and the diffuse scattering around the specular reflection, and recovers the expression of the CWM at its zero 𝜅 limit. This theoretical approach enables the use of single-shot grazing incidence x-ray off-specular scattering (GIXOS) measurements for characterizing the structure of thin films on a liquid surface. The eCWM analysis approach decouples the thermal roughness factor from the surface scattering signal, providing direct access to the intrinsic surface-normal structure of the film and its bending modulus. Moreover, the eCWM facilitates the calculation of reflectivity at any desired resolution (pseudo-XRR approach). The transformation into pseudo-XRR provides the benefit of using widely available XRR software to perform GIXOS analysis. The extended range of the vertical scattering vector (𝑄 𝑧 ) available with the GIXOS pseudo-XRR approach allows for a higher spatial resolution than with conventional XRR. Experimental results are presented for various lipid systems, showing strong agreement between conventional specular XRR and pseudo-XRR methods. This agreement validates the proposed approach and highlights its utility for analyzing soft, thin films.

36 MATERIALS SCIENCE↗

Stochastic Fitting of Specular X-ray Reflectivity Data Using StochFit

Specular X-ray reflectivity data provide detailed information on the electron density distribution at an interface. Typical modeling methods involve choosing a generic electron density distribution based on an initial speculation of the electron density profile from the physical parameters of the experimental system. This can lead to a biased set of solutions. StochFit provides stochastic model-independent and model-dependent methods for analyzing X-ray reflectivities of thin films at an interface. StochFit divides an electron density profile into many small boxes and stochastically varies the electron density of these boxes to locate the best fit to a measured reflectivity. Additionally, it provides the ability to perform model-dependent fitting with a stochastic search of the parameter space in order to locate the best possible fit. While model-independent profile search algorithms have been described previously, they are difficult to implement because of the heavy computational requirements, and there is a dearth of software available to the general scientific public utilizing these techniques. Several cases that illustrate the usefulness of these techniques are presented, with a demonstration of how they can be used in tandem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Powder diffraction by fixed incident angle reflection using a curved position-sensitive detector

As curved position-sensitive detectors improve in angular resolution, the effects that fixed incident angle reflection have on X-ray diffraction peaks become more apparent. In this study the effects of sample transparency, incident beam height, detector resolution and sample displacement on the intensity, location, width and shape of powder diffraction peaks were examined. The functions describing each of these phenomena are presented and were successfully used to quantitatively model the diffraction peaks collected in this geometry. Three distinct regimes of diffraction peak resolution were identified from the phenomena that limit the peak variance. Pertinent criteria based on experimental parameters have been outlined to classify fixed incident angle reflection experiments into each regime. Guidelines for improvement of experimental resolution and for conducting analysis of data acquired using fixed incident angle reflection geometry and curved position-sensitive detectors are also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of interface reaction in a B 4 C/Cr mirror at elevated temperature using soft X-ray reflectivity

Boron carbide is a prominent material for high-brilliance synchrotron optics as it remains stable up to very high temperatures. The present study shows a significant change taking place at 550°C in the buried interface region formed between the Cr adhesive layer and the native oxide layer present on the silicon substrate. An in situ annealing study is carried out at the Indus-1 Reflectivity beamline from room temperature to 550°C (100°C steps). The studied sample is a mirror-like boron carbide thin film of 400 Å thickness deposited with an adhesive layer of 20 Å Cr on a silicon substrate. The corresponding changes in the film structure are recorded using angle-dependent soft X-ray reflectivity measurements carried out in the region of the boron K-edge after each annealing temperature. Analyses performed using the Parratt recursive formalism reveal that the top boron carbide layer remains intact but interface reactions take place in the buried Cr–SiO2 region. After 300°C the Cr layer diffuses towards the substrate. At higher temperatures of 500°C and 550°C the Cr reacts with the native oxide layer and tends to form a low-density compound of chromium oxysilicide (CrSiOx). Depth profiling of Si and Cr distributions obtained from secondary ion mass spectroscopy measurements corroborate the layer model obtained from the soft X-ray reflectivity analyses. Details of the interface reaction taking place near the substrate region of boron carbide/Cr sample are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Total Internal Reflection Photoconductive Switch

We demonstrate a novel illumination technique for extrinsic photoconductive switches based on the creation of a total internal reflection trap to increase the optical path length. The optimal geometry is a square substrate illuminated from one of the corners along the diagonal, ensuring that the total internal reflection condition is maintained after any reflection off the device lateral sides. The optical absorption uniformity throughout the device bulk was improved by designing the entry window to have a cylindrical shape and by using a square core optical fiber as an illumination source. In conclusion, the concept is experimentally validated on a vanadium-doped silicon carbide device that shows approximately four-fold improvement in responsivity compared to normal illumination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Numerical Computation of Clear-Sky Transmittance and Reflectance of Solar Radiation for the Modeling of PV System Performance

Modeling of photovoltaics (PV) system performance requires numerical computation of plane-of-array (POA) irradiances that are influenced by atmospheric absorption and scattering. Clear-sky transmittance and reflectance of diffuse irradiance are essential for the understanding of solar radiation related to multiple reflection between land surface and clouds. This study analytically solves the radiative transfer equation for clear-sky conditions and numerically computes the transmittance and reflectance of diffuse irradiance as functions of the optical thickness of the atmosphere. The computation will be implemented in all-sky radiative transfer models to improve their computational efficiency.

14 SOLAR ENERGY↗

Simulating Scintillator Light Collection Using Measured Optical Reflectance

To accurately predict the light collection from a scintillating crystal through Monte Carlo simulations, it is crucial to know the angular distribution from the surface reflectance. Current Monte Carlo codes allow the user to set the optical reflectance to a linear combination of backscatter spike, specular spike, specular lobe, and Lambertian reflections. However, not all light distributions can be expressed in this way. In addition, the user seldom has the detailed knowledge about the surfaces that is required for accurate modeling. We have previously measured the angular distributions within BGO crystals and now incorporate these data as look-up-tables (LUTs) into modified Geant4 and GATE Monte Carlo codes. The modified codes allow the user to specify the surface treatment (ground, etched, or polished), the attached reflector (Lumirror(R), Teflon(R), ESR film, Tyvek(R), or TiO paint), and the bonding type (air-coupled or glued). Each LUT consists of measured angular distributions with 4o by 5o resolution in theta and phi, respectively, for incidence angles from 0? to 90? degrees, in 1o-steps. We compared the new codes to the original codes by running simulations with a 3 x 10 x 30 mm3 BGO crystal coupled to a PMT. The simulations were then compared to measurements. Light output was measured by counting the photons detected by the PMT with the 3 x 10, 3 x 30, or 10 x 30 mm2 side coupled to the PMT, respectively. Our new code shows better agreement with the measured data than the current Geant4 code. The new code can also simulate reflector materials that are not pure specular or Lambertian reflectors, as was previously required. Our code is also more user friendly, as no detailed knowledge about the surfaces or light distributions is required from the user.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of zinc oxide thin film using atomic force microscopy and optimized X-ray reflectivity by genetic algorithm

For the nanostructured thin films, the study of surface physical parameters is often of crucial importance. For example, the transport properties of ZnO thin film are strongly affected by the geometry of this film. In this study sol—gel ZnO thin film was spin coated on glass substrate. The inverse problem of thin film characterization is formulated as a parameter identification problem in which a set of parameters corresponding to the thin film property can be found by minimizing fitness functions formulated using theoretical and experimental X-ray reflectivity. Atomic force microscopy (AFM) measurements used as an independent procedure for extracting structural parameters of the film and accurate interpretation of X-ray reflectivity data. After applying Fractal calculations on the AFM measured data the Genetic algorithm (GA) method was applied for extracting other important structural parameters. Optimization of specular X-ray reflectivity by GA method gives information along the depth such as thickness, roughness, and electron density profile of layers in the film.

36 MATERIALS SCIENCE↗

Low energy Ar{sup +} bombardment of GaN surfaces: A statistical study of ion reflection and sputtering

Statistical molecular dynamics simulations are performed to analyze the sputtering of w-GaN (wurtzite) and z-GaN (zinc blende) surfaces under 100 eV Ar{sup +} ion bombardment. Ion reflection and physical sputtering mechanisms are investigated as a function of the ion impact angle and the crystalline nature of samples. The probability of ion reflection is lower for the w-GaN phase and increases with the angle of incidence {theta}{sub i}. As {theta}{sub i} becomes more glancing, the reflected ions become more energetic and their angular distribution tends to narrow. The sputtering yields of w-GaN and z-GaN surfaces are maximum for {theta}{sub i}=45 deg. For near-normal incidence, the probability of sputtering is smaller for the w-GaN phase, suggesting that the atomic arrangement in the pristine state modifies the characteristics of the momentum transfer occurring between the ion and the surface atoms during the collision cascade. Atomic nitrogen sputters preferentially and represents 87% to 100% of sputtered species due to its lower mass. These statistical results differ from the predictions of continuous ion bombardment simulations since the surfaces are not allowed to evolve self-consistently during the gathering of impact statistics.

36 MATERIALS SCIENCE↗

The Effect of Specular Reflectances on the Interaction of an Electromagnetic E Wave with a Thin Metal Film Placed between Two Dielectric Media

The interaction of an electromagnetic E wave with a thin metal film placed between two dielectric media is calculated in the case of different specular reflectances q{sub 1} and q{sub 2} for the reflection of electrons from the surface of the thin metal layer, in the case of variations in the values of dielectric permittivities ε{sub 1} and ε{sub 2} of the media, and in the case of different values of angle of incidence θ of the electromagnetic wave. The behavior of reflection coefficient R, transmission coefficient T, and absorption coefficient A in relation to the frequency of the external field is analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗