Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rock sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

The Mineralogical Record of Ancient Fluvio-Lacustrine Environments in Gale Crater as Measured by the MSL CheMin Instrument

The Mars Science Laboratory Curiosity rover landed in Gale crater in August 2012 to investigate early Hesperian-aged sedimentary rocks on the lower slopes of Aeolis Mons (i.e., Mount Sharp) that show variations in phyllosilicates, hematite, and sulfates from orbital reflectance spectroscopy, suggesting changes in ancient aqueous environments. During the Eighth International Conference on Mars in July 2014, Curiosity was still traversing the Bradbury group on the plains of Gale crater (Aeolis Palus) and had only analyzed four samples in its internal laboratories. Soon after Mars 8, Curiosity began its investigation of Mount Sharp and has since driven through ~350 m of vertical stratigraphy, the majority of which is part of the Murray formation. The Murray fm is comprised primarily of laminated mudstone with occasional sandstone and heterolithic facies and represents a long-lived fluvio-lacustrine environment. Curiosity has analyzed 13 drilled rock samples from the Murray formation and 4 from the ancient eolian Stimson fm with the Chemistry and Mineralogy (CheMin) instrument. Here, we discuss the mineralogy of all fluvio-lacustrine samples analyzed to date and what these results tell us about sources of the sediments, aqueous environments, and habitability of ancient Gale crater.

Rampe, E. B.↗

Rb-Sr systematics for chemically defined Apollo 15 and 16 materials

Concentrations of Rb and Sr and the Sr87/86 ratios are determined in a large number of Apollo 15 samples, including KREEP basalts, mare basalts, anorthosite breccia clasts, lithic fragments, a spinel-bearing clast, green glass samples, breccia matrix, and soils. Relative concentrations of Sm, Eu, Rb, and Sr are also examined in the samples, with particular attention to Rb/Sr systematics vs other trace element abundances and total chemical compositions of rocks. Analysis of crystalline KREEP samples rich in trace elements indicates that the differentiation of these rocks has extended to -4.25 AE age, a significantly later time than the presumed time of accretion of the moon.

Nyquist, L. E.↗

Making Thin Sections from National Treasures: A Little Moon Rock Goes a Long Way

NASA’s Johnson Space Center curates the Apollo sample collection through their facilities in Houston, TX. It is a dual-purpose facility, intended both to store and preserve the precious samples, as well as to make them available for ongoing scientific study and public examination. The facilities consist of multiple vaults and lab spaces, including the Apollo Thin Section Lab. Although it is a part of the Curation facilities, this lab is intended to process specific lunar rock and dust samples into what are called “thin sections”. A thin section is a microscope slide with a very thin, highly polished slice of rock material mounted on it. These are used not only for microscope viewing, but also for a range of other sophisticated scientific instruments to map and measure fine details of the rock’s physical and chemical composition and structure. The process of making a thin section requires great care and patience and is an art in itself; each one is unique, and each sample can behave very differently while going through the same basic procedures. In general, it begins by taking a small chip of rock from a much larger sample. The rock fragment is placed within a small mold and liquid epoxy is poured over it and allowed to harden, producing what is called a “potted butt” (Figure 1). This is to stabilize the rock so that it won’t fragment or crumble during polishing, and to fill any cracks or voids within the rock. Once hardened, the epoxy on the bottom is carefully ground away to expose the rock surface within, which is then polished to a 1-micron finish. A thin new layer of fresh epoxy is then applied to the polished surface and used to mount it to a silica slide. Once the mounting epoxy has hardened, the potted butt is cut off less than one millimeter above the slide using a low-speed circular saw. This thin layer of sample material attached to the slide undergoes further grinding and polishing, typically bringing the sample thickness down to about 35 microns – roughly one third of the thickness of a human hair. The remaining potted butt is saved for future scientific investigations and can be re-polished and used again until all the rock material within it is used up. A single thin section can be reused countless times by numerous different researchers. In addition, thin sections are often exquisitely beautiful (Figure 2) and in some cases, lunar thin sections are used as public display samples, such as at the Smithsonian Air and Space Museum in Washington, DC. The production of thin sections allows an immense variety of research to be conducted on a tiny amount of rock or mineral material, allowing the bulk of the Apollo collection to stay pristine and unaltered, and thus, remain available for next generation of lunar scientists to further our insight into the Moon’s geological diversity, and to bring valuable new insights to our understanding of the origin of the Earth-Moon system.

J J Kent↗

Strategies for Investigating Early Mars Using Returned Samples

The 2011 Visions & Voyages Planeary Science Decadal Survey identified making significant progress toward the return of samples from Mars as the highest priority goal for flagship missions in next decade. Numerous scientific objectives have been identified that could be advanced through the potential return and analysis of martian rock, regolith, and atmospheric samples. The analysis of returned martian samples would be particularly valuable in in-creasing our understanding of Early Mars. There are many outstanding gaps in our knowledge about Early Mars in areas such as potential astrobiology, geochronology, planetary evolution (including the age, context, and processes of accretion, differentiation, magmatic, and magnetic history), the history of water at the martian surface, and the origin and evolution of the martian atmosphere. Here we will discuss scientific objectives that could be significantly advanced by Mars sample return.

Carrier, B. L.↗

Characterization of Apollo Regolith by X-Ray and Electron Microbeam Techniques: An Analog for Future Sample Return Missions

The Apollo missions collected 382 kg of rock and regolith from the Moon; approximately 1/3 of the sample mass collected was regolith. Lunar regolith consists of well mixed rocks, minerals, and glasses less than 1-centimeter n size. The majority of most surface regolith samples were sieved into less than 1, 1-2, 2-4, and 4-10- millimiter size fractions; a portion of most samples was re-served unsieved. The initial characterization and classification of most Apollo regolith particles was done primarily by binocular microscopy. Optical classification of regolith is difficult because (1) the finest fraction of the regolith coats and obscures the textures of the larger particles, and (b) not all lithologies or minerals are uniquely identifiable optically. In recent years, we have begun to use more modern x-ray beam techniques [1-3], coupled with high resolution 3D optical imaging techniques [4] to characterize Apollo and meteorite samples as part of the curation process. These techniques, particularly in concert with SEM imaging of less than 1-millimeter regolith grain mounts, allow for the rapid characterization of the components within a regolith.

Zeigler, Ryan A.↗

Mineral-specific heterogeneous neptunium sorption onto geological repository rocks in oxic and anoxic conditions and various temperatures

Neptunium poses challenges for radioactive wastes management due to its long half-life and ingrowth from americium decay, as well as its high mobility in water in its oxidized forms. Np(V)-bearing aqueous solutions were contacted with polished and crushed gneiss and dolerite from the Yeniseisky site, Russia, which is under consideration as a location for an underground repository, both in oxic and anoxic conditions at 20 and 90 °C. Neptunium sorption on crushed gneiss and dolerite in oxic conditions at 20 °C was quite low, but increased substantially in anoxic conditions. Autoradiography on samples treated at 20 °C revealed that sorbed Np was associated mostly with dark colored iron-bearing minerals, and solvent extraction indicated partial reduction of Np(V) to Np(IV). Sorption of Np from aqueous solutions contacted with dolerite and gneiss at 90 °C was in all cases higher than at the lower temperature. Autoradiography of polished rock samples treated in anoxic conditions at 90 °C revealed that Fe-bearing minerals had 3–4 orders of magnitude more Np sorbed on them than the quartz and feldspar grains. X-ray photoelectron spectroscopy indicated this sorbed Np was present as NpO 2 . This study supports the concept that the geologic conditions present at the planned repository site will retard Np migration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Elemental Composition of Analogs to Mars Return Samples Studied with X-Ray Fluorescence Imaging at NSLS-II

In 2020, NASA will launch out into the first step of what may be an ambitious, multi-mission campaign with the goal to bring back for analysis in laboratories here to Earth a collection of rock, regolith, and atmosphere samples from Mars. It is the main objective of this endeavor to determine whether or not Mars was ever host to ancient microbial life. Finding evidence for extinct (or extant) life on Mars has the potential to fundamentally alter our view of the origin and evolution of life. It would provide proof for Earth being just one amongst others regarding the question of biological activity in the Solar System. Furthermore, returned Martian samples would provide a rich repository of information on the history of planetary accretion and differentiation, geochronology, atmospheric evolution, and the paleo-environmental history of Mars, adding tremendous additional value to such a mission beyond the issue of extraterrestrial life. Here the potential knowledge to be obtained by such a collection of samples will equal or exceed that of the Apollo lunar sample archive, which even today yields new insights on the history of the Solar System, over 40 years after they were returned to Earth.

36 MATERIALS SCIENCE↗

Compositional and Geochronological Constraints on the Lunar Cataclysm from Planetary Samples

Radiometric dating and compositional clustering of lunar impact-melt rocks form the backbone of the lunar cataclysm hypothesis. Precise age determinations of Apollo and Luna impact-melt rocks define the classic formulation of the cataclysm: a large number of samples 3.9 Ga old, a steep decline after 3.9 Ga, and few impact rocks older than ~4.0 Ga. Lunar meteorites more randomly sample the lunar surface, but impact-melt clasts in these rocks show the same apparent age cutoff at 4.0 Ga (though their ages extend approx.500 Myr later). Neither do impact-formed glass spherules and fragments, formed by impacts of all sizes throughout lunar history, predate 4.0 Ga. Geological associations between compositional groups of impact-melt rocks and specific impact basins imply that five large basins formed on the Moon within 200 Myr but a counter-argument postulates they are all products of the Imbrium basin-forming impact; it is not yet proven whether groups of impact melt that are resolvable from each other in age and in trace-element composition represent multiple impacts. The 3.9 Ga age peak and subsequent steep decline are not well mirrored in meteorite data. Radiometric ages in ordinary chondrites and HED meteorites peak around 3.9 Ga but ages older and younger than 3.9 Ga are common. Among Martian meteorites, there is a single impact-related age: ALH 84001 was shocked at 3.92 Ga. Differences in relative impact velocity, impact-melt production, and sampling rate could explain differences between the meteorite and lunar records. One way to anchor the early end of the lunar flux is to directly sample the impact-melt sheet of a large lunar basin distant from Imbrium, such as the South Pole-Aitken basin, where melt rocks probably still resides on the basin floor and could be directly sampled by a human or robotic mission.

Cohen, Barbara A.↗

A Dataset of 3D Structural and Simulated Transport Properties of Complex Porous Media

Physical processes that occur within porous materials have wide-ranging applications including - but not limited to - carbon sequestration, battery technology, membranes, oil and gas, geothermal energy, nuclear waste disposal, water resource management. The equations that describe these physical processes have been studied extensively; however, approximating them numerically requires immense computational resources due to the complex behavior that arises from the geometrically-intricate solid boundary conditions in porous materials. Here, we introduce a new dataset of unprecedented scale and breadth, DRP-372: a catalog of 3D geometries, simulation results, and structural properties of samples hosted on the Digital Rocks Portal. The dataset includes 1736 flow and electrical simulation results on 217 samples, which required more than 500 core years of computation. This data can be used for many purposes, such as constructing empirical models, validating new simulation codes, and developing machine learning algorithms that closely match the extensive purely-physical simulation. This article offers a detailed description of the contents of the dataset including the data collection, simulation schemes, and data validation.

3D images↗

Split Hopkinson Resonant Bar Test for Sonic-Frequency Acoustic Velocity and Attenuation Measurements of Small, Isotropic Geologic Samples

Mechanical properties (seismic velocities and attenuation) of geological materials are often frequency dependent, which necessitates measurements of the properties at frequencies relevant to a problem at hand. Conventional acoustic resonant bar tests allow measuring seismic properties of rocks and sediments at sonic frequencies (several kilohertz) that are close to the frequencies employed for geophysical exploration of oil and gas resources. However, the tests require a long, slender sample, which is often difficult to obtain from the deep subsurface or from weak and fractured geological formations. In this paper, an alternative measurement technique to conventional resonant bar tests is presented. This technique uses only a small, jacketed rock or sediment core sample mediating a pair of long, metal extension bars with attached seismic source and receiver - the same geometry as the split Hopkinson pressure bar test for large-strain, dynamic impact experiments. Because of the length and mass added to the sample, the resonance frequency of the entire system can be lowered significantly, compared to the sample alone. The experiment can be conducted under elevated confining pressures up to tens of MPa and temperatures above 100 C, and concurrently with x-ray CT imaging. The described Split Hopkinson Resonant Bar (SHRB) test is applied in two steps. First, extension and torsion-mode resonance frequencies and attenuation of the entire system are measured. Next, numerical inversions for the complex Young's and shear moduli of the sample are performed. One particularly important step is the correction of the inverted Young's moduli for the effect of sample-rod interfaces. Examples of the application are given for homogeneous, isotropic polymer samples and a natural rock sample.

54 ENVIRONMENTAL SCIENCES↗

Application of MAC-Europe AVIRIS data to the analysis of various alteration stages in the Landdmannalauger Hydrothermal Area (South Iceland)

In June 1991 extensive airborne remote sensing data-sets have been acquired over Iceland in the framework of the joint NASA/ESA Multisensor Airborne Campaign Europe (MAC-Europe). The study area is located within the Torfajokull central volcanic complex in South Iceland. This complex is composed by anomalously abundant rhyolitic acid volcanics, which underwent intensive hydrothermal alteration. Detailed studies of surface alteration of rhyolitic rocks in the area showed that all the major elements are leached as the rock is affected by complex mineralogical changes. Montmorillonite appears during the earliest stages of alteration. In the ultimate alteration product montmorillonite is absent and the rock consists mostly of amorphous silica, anatase, up to a volume of 50% kaolinite and variable amounts of native sulphur and pyrite. The case study presented shall endeavor to assess the potential of MAC-Europe AVIRIS and TMS data in determining a possible zonation of hydrothermal alteration in relationship to the active geo-thermal fields and structural features. To this end, the airborne data is analysed in comparison with laboratory spectral measurements of characteristics rock, soil, and vegetation samples collected in the study areaduring the summer of 1992. Various spectral mapping algorithms as well as unmixing approaches are tested and evaluated. Detailed geological and structural mapping as well as geochemical analysis of the main rock and soil types were performed to underpin the analysis of the airborne data.

Sommer, S.↗

Cosmogenic nuclides in football-sized rocks.

The activity of long- and short-lived isotopes in a series of samples from a vertical column through the center of rock 14321 was measured. Rock 14321 is a 9 kg fragmental rock whose orientation was photographically documented on the lunar surface. Also investigated was a sample from the lower portion of rock 14310, where, in order to study target effects, two different density fractions (mineral separates) were analyzed. A few nuclides in a sample from the comprehensive fines 14259 were measured. This material has been collected largely from the top centimeter of the lunar soil. The study of the deep samples of 14321 and 14310 provided values for the activity of isotopes at points where only effects produced by galactic cosmic rays are significant.

Wahlen, M.↗

Distribution of siderophile and other trace elements in melt rock at the Chicxulub impact structure

Recent isotopic and mineralogical studies have demonstrated a temporal and chemical link between the Chicxulub multiring impact basin and ejecta at the Cretaceous-Tertiary boundary. A fundamental problem yet to be resolved, however, is identification of the projectile responsible for this cataclysmic event. Drill core samples of impact melt rock from the Chichxulub structure contain Ir and Os abundances and Re-Os isotopic ratios indicating the presence of up to approx. 3 percent meteoritic material. We have used a technique involving microdrilling and high sensitivity instrumental neutron activation analysis (INAA) in conjunction with electron microprobe analysis to characterize further the distribution of siderophile and other trace elements among phases within the C1-N10 melt rock.

Schuraytz, B. C.↗

An Approximately 4.35 Ga Ar-Ar Age for GRA 8 and the Complex Chronology of its Parent Body

GRA06128 and GRA06129 (hereafter GRA 8 and GRA 9) are partial melts of a parent body of approximately chondritic composition. We reported a conventional Sm-147-Nd-143 isochron age of 4.559+/-0.096 Ga and a 146 Sm-142Nd model age of 4.549+/-0.036 for combined data for the two rocks. Plagioclase plus whole rock and leachate (approx.phosphate) samples gave a secondary Sm-147-Nd-143 age of 3.4+/-0.4 Ga. An Ar-39-Ar-40 age of 4.460+/-0.028 Ga was interpreted as dating metamorphism in GRA 9. We report Ar-39-Ar-40 ages in the range approx.4344-4366 Ma for GRA 8, establishing similar but different Ar-39-Ar-40 ages for the two rocks, consistent with their different Sr-isotopic systematics, and discuss these ages in the context of the complex sequence of events that affected these samples.

Park, J.↗

Preserving and Curating the Moon: Adventures in Lunar Core Processing

The lunar crust is the most easily accessible part of the Moon to both remote sensing and sample analyses and provides an archive of information about planetary formation, crustal evolution, and contains a wealth of information about the origin of the Earth-Moon system [e.g., 1-5]. The Apollo mission returned 382 kg of rocks, soil and core samples. Studies of these lunar samples are crucial for our understanding of the Moon’s formation and geological evolution, and for the past 50 years these returned samples have provided the foundation for lunar science [5]. The returned samples are stored and cared for in the lunar curation facility at NASA’s Johnson Space Center. This facility is comprised of a large suite of clean rooms, sample vaults for pristine and return samples, thin section labs, core and saw rooms, storage and working areas, and ancillary labs all designed to minimize contamination from the environment and other samples. Some of the returned samples were intentionally set aside and left unopened. Recently, the Apollo Next Generation Sample Analysis (ANGSA) initiative was designed to examine these pristine samples so the next generation of lunar scientists can further our insight into the Moon’s history. Here, we present the meticulous process that involves preparing for, and ultimately opening, one of the unopened core samples: Apollo 17 drive tube 73002,0,which was collected on the Moon from a landslide deposit near Lara Crater by astronauts Gene Cernan and Jack Schmitt. In order to open, examine, and curate 73002,0withminimalpotential contamination, great care had to be taken prior to opening its container. Beginning18 months before extrusion of the sample, all core processing equipment was pulled out of storage, identified, sorted, cleaned, and purged with nitrogen gas. However, limited institutional memory has made this step challenging as most of the former core processors from the Apollo area have retired or passed away. Twelvemonths prior to extrusion, table-top rehearsals were initiated to identify equipment and learn how it fits together and operates. Five months before extruding the real core, preparations further evolved to include the extrusion and dissection of a lunar core simulant. In addition, a mock-up glovebox was designed and built to allow for a more realistic practice environment. One month prior to extrusion, the actual core cabinet was prepared for use, which included fitting it with lights, a webcam, and power. The tool and equipment cleaning procedure was also modified to include increased cleanliness and sterility requirements. While still sealed, the core was CT scanned at the University of Texas at Austin to maximize its scientific return. Days before the extrusion, witness plates and foil were deployed inside the core cabinet to monitor potential particle and organic contamination within the cabinet. On Nov. 5th, 2019, core sample 73002,0 was successfully opened and extruded(Fig.1). Dissection of 73002,0 began immediately afterwards and is still under way. Processing this sample will help us prepare for future sampling missions and core extrusions and will enable new scientific discoveries about the Moon.

C H Krysher↗