Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIZE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Exploring the relationship between solvent-assisted ball milling, particle size, and sintering temperature in garnet-type solid electrolytes

Garnet-type solid electrolytes, such as Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO), are promising materials for solid-state batteries, but processing remains a challenge, in part due to the high sintering temperature required for densification. Additionally, this temperature can be lowered by decreasing the initial particle size via solvent-assisted ball milling, but the relationship between solvent choice, particle properties, sintering behavior, and ionic conductivity is not well understood. In this work, we systematically explore these parameters, showing that milling in commonly used protic solvents, such as alcohols, effectively decreases the particle size but results in lithium loss (through Li + /H + exchange) that leads to poor sintering. By contrast, milling in aprotic solvents with surfactant reduces the particle size to ~220 nm without lithium loss, enabling the fabrication of dense samples (5.1 g/cm 3 ) with good ionic conductivity (0.43 mS/cm at 25 °C) at a lower sintering temperature (1000 °C). We compare ionic conductivities and activation energies for samples prepared with different particle sizes and sintering temperatures and use multiphase-field simulations to identify the mass transport and microstructural mechanisms responsible for the observed sintering dependence on particle size. These results further clarify the relationship between processing parameters and performance and represent important progress toward overcoming fabrication challenges for these materials.

25 ENERGY STORAGE↗

Optical phonons in nanostructured thin films composed by zincblende zinc selenide quantum dots in strong size-quantization regime: Competition between phonon confinement and strain-related effects

Raman scattering in combination with optical spectroscopy and structural studies by X-ray diffraction was employed to investigate the phonon confinement and strain-induced effects in 3D assemblies of variable-size zincblende ZnSe quantum dots close packed in thin film form. Nanostructured thin films were synthesized by colloidal chemical approach, while tuning of the nanocrystal size was enabled by post-deposition thermal annealing treatment. In-depth insights into the factors governing the observed trends of the position and half-width of the 1LO band as a function of the average QD size were gained. The overall shifts in the position of 1LO band were found to result from an intricate compromise between the influence of phonon confinement and lattice strain-induced effects. Both contributions were quantitatively and exactly modeled. Accurate assignments of the bands due to surface optical (SO) modes as well as of the theoretically forbidden transverse optical (TO) modes were provided, on the basis of reliable physical models (such as the dielectric continuum model of Ruppin and Englman). The size-dependence of the ratio of intensities of the TO and LO modes was studied and discussed as well. Relaxation time characterizing the phonon decay processes in as-deposited samples was found to be approximately 0.38 ps, while upon post-deposition annealing already at 200 °C it increases to about 0.50 ps. Both of these values are, however, significantly smaller than those characteristic for a macrocrystalline ZnSe sample. - Graphical abstract: Optical phonons in nanostructured thin films composed by zincblende zinc selenide quantum dots in strong size-quantization regime: competition between phonon confinement and strain-related effects. - Highlights: • Phonon confinement vs. strain-induced effects in ZnSe 3D QD assemblies were studied. • Shifts of the 1LO band result from an intricate compromise between the two effects. • SO and theoretically forbidden TO modes were accurately assigned. • Phonon relaxation time in as-deposited and annealed samples is 0.38 ps and 0.50 ps. • Both values are significantly smaller than in macrocrystalline ZnSe sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of porous aluminosilicate grain size materials in experimental and modelling Cs + adsorption kinetics and wastewater column process

This paper focuses on the influence of the grain size of a geopolymer based adsorbent on its Cs + adsorption performances both in batch and fixed-bed process. The geopolymer phase was used as a binder to support NaY zeolite particle in a 20 wt% charged porous composite with 160 m 2 .g –1 of porous surface area. These samples were shaped with three grain sizes (50 /100/500 µm) to remove 80–90 mg/g of Cs + in batch and column operations. After their microstructural and porous characterizations, their efficiency and adsorption characteristics were investigated through adsorption isotherms and kinetic in the two processes. While the grain size has no influence on the maximal extraction capacity of the adsorbent, it strongly affects the sorption kinetic. By coupling experimental data and a modelling approach, the complex sorption mechanism was highlighted, suggesting a new insight of the contaminant sorption kinetic. Then, comparison of batch and column adsorption experiments illustrates the detailed explanation of various process parameters for column study. The results show challenges for fixed-bed column utilization by the choice of the appropriate grain size as a compromise between the material sorption kinetic and hydrodynamic considerations. Furthermore, this is of high importance to more accurately optimize the design of column adsorption to assess the transport of Cs+ in multi-porous tailored grain size materials.

36 MATERIALS SCIENCE↗

Impact of mixed grain size sediment input on braided river Morphodynamics: Insights from experimental and numerical modeling

The rate of sediment supply has significant impacts on river morphology, making it crucial to understand the geomorphic changes and grain size distribution dynamics in rivers. However, the effects of varying grain size sediment input on morphological changes in braided channels remain poorly understood. This study is the first to investigate the bar development and sediment sorting processes in braided channels with non-uniform sediment inputs using both numerical and experimental approaches. We applied a two-dimensional numerical model, Nays2DH to confirm and generalize experimental results. The model reproduced key experiment results, including 1) stream elevation changes, and 2) grain size distribution. Using this validated model, we explored the morphological changes and sorting process in a braided river with sediment inputs. The numerical experiments demonstrate that sediment input controls the elevation of the stream bed and the grain size distribution. Notably, both the elevation and grain-size distribution become relatively stable in downstream of the channel. Additionally, the simulation results suggest that an increased sediment supply leads to greater channel complexity, with bed surface armoring decreasing.

Nays2DH↗

Effects of combined silicon and molybdenum alloying on the size and evolution of microalloy precipitates in HSLA steels containing niobium and titanium

The effects of combined silicon and molybdenum alloying additions on microalloy precipitate formation in austenite after single- and double-step deformations below the austenite no-recrystallization temperature were examined in high-strength low-alloy (HSLA) steels microalloyed with titanium and niobium. The precipitation sequence in austenite was evaluated following an interrupted thermomechanical processing simulation using transmission electron microscopy. Large (~ 105 nm), cuboidal titanium-rich nitride precipitates showed no evolution in size during reheating and simulated thermomechanical processing. The average size and size distribution of these precipitates were also not affected by the combined silicon and molybdenum additions or by deformation. Relatively fine (< 20 nm), irregular-shaped niobium-rich carbonitride precipitates formed in austenite during isothermal holding at 1173 K. Based upon analysis that incorporated precipitate growth and coarsening models, the combined silicon and molybdenum additions were considered to increase the diffusivity of niobium in austenite by over 30% and result in coarser precipitates at 1173 K compared to the lower alloyed steel. Deformation decreased the size of the niobium-rich carbonitride precipitates that formed in austenite. - Highlights: • We examine combined Si and Mo additions on microalloy precipitation in austenite. • Precipitate size tends to decrease with increasing deformation steps. • Combined Si and Mo alloying additions increase the diffusivity of Nb in austenite.

36 MATERIALS SCIENCE↗

The effect of cell-size dispersity on the mechanical properties of closed-cell aluminum foam

Highlights: • The effect of cell-size dispersity on the Young’s modulus of foam was investigated through experiments and simulations • Crushing experiments were conducted on 27 foam specimens in order measure the relative Young’s modulus • Three types of numerical models, including monodispersed, bidispersed and polydispersed models were studied • The numerical convergence on the model size for different models was also studied • The difference among numerical results obtained from the three models was insignificant - Abstract: The mechanical properties of open-celled and closed-celled metallic foam are strongly influenced by the cellular microstructure and material properties of the base material from which the foam is made. The present study investigated the microstructure and mechanical properties of ALPORAS closed-cell Al foam. In particular, the effect of cell-size dispersity on the Young's modulus of foam was investigated through crushing experiments and numerical simulations. Crushing experiments were first conducted on two mutually perpendicular directions. Numerical models of varying cell-size dispersity and complexity were subsequently developed, including the monodispersed model that is based on the Kelvin structure, the bidispersed model, and the polydispersed model that is based on the random Laguerre tessellation algorithm. The numerical models were discretized using shell elements, and the simulations were conducted using the ABAQUS finite element method software. Relative Young's moduli with various relative densities were predicted, and the numerical convergence on the model size was studied accordingly. Numerical results obtained from all three numerical models developed were found to overestimate the experimental results by a factor of approximately 3. The difference between the numerical and experimental results can be attributed to the difference in detailed microstructural characteristics. Furthermore, the difference among numerical results obtained from the three models was insignificant.

36 MATERIALS SCIENCE↗

Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions

Effect of dynamic recrystallization (DRX) on the grain refinement and texture modification was studied by conducting a series of hot compression on AZ31B Mg alloy. Processing-grain size-texture maps were established as a function of temperature, strain rate, strain, and the Zener-Hollomon parameter (Z). Moreover, influence of simultaneous changes in the grain size and texture on tensile yield strength and ductility of the hot-worked Mg alloy was studied using the grain size and texture maps established. The processing-grain size map showed that the DRX grain size decreased with the increase in Z, also revealing various characteristics ranging from a grain growth, grain refinement, to a bimodal distribution of ultrafine grains and partially recrystallized grains. The effect of twinning on the grain refinement was also evident at high Z conditions. The processing-texture map revealed that the initial fiber texture was altered significantly to a shear, off-normal, or extension-twin texture with the increase in Z. The Schmid-factor maps were calculated to identify a dominant deformation mode during a subsequent tensile deformation of the hot-worked samples. Finally, a corresponding Hall-Petch relationship for each dominant deformation mode was used to establish tensile yield-strength maps, which agree well with the measured data.

36 MATERIALS SCIENCE↗

Photocatalytic degradation of reactive brilliant blue X-BR in aqueous solution using quantum-sized ZnO

Quantum-sized ZnO was prepared using sol-gel method with zinc acetate dehydrate (Zn(CH{sub 3}COO){sub 2}.2H{sub 2}O) and lithium hydroxide monohydrate (LiOH.H{sub 2}O) as raw material. The ZnO particles annealed at different temperature were characterized by means of X-ray diffraction (XRD), Infrared absorption spectroscopy (IR) and UV-vis spectroscopy. The degradation rate of reactive brilliant blue X-BR in aqueous solution was used to evaluate the photocatalytic performance of the quantum-sized ZnO. The experimental results indicated that the photocatalytic property of the ZnO was excellent. The photocatalytic efficiency of quantum-sized ZnO was significantly influenced by the calcining heat. When calcined at 300 deg. C, its size is 6.78 nm and the photocatalytic performance is the best. The degradation rate of reactive brilliant blue X-BR could exceed 90% in 15 min at 35 deg. C, when the concentration of the quantum-sized ZnO was 0.35 mg/L.

36 MATERIALS SCIENCE↗

Size effect on electronic transport in nC–Si/SiO{sub x} core/shell quantum dots

Highlights: ► Electrical conductivity (σ) demonstrated to exhibit quantum size effect for Si-QDs. ► High σ ∼ 4 × 10{sup −2} S cm{sup −1} for Si-QDs of average size ∼3.7 nm, number density ∼4.8 × 10{sup 11} cm{sup −2}. ► Heterojunction-like band-structure at the QD interface controls electronic transport. -- Abstract: Electronic transport in silicon quantum dots (Si-QDs) in core/shell configuration was studied. The nC–Si cores encapsulated by protective SiO{sub x} shells embedded in a-Si matrix were obtained from one-step and spontaneous plasma processing, at low substrate temperature (300 °C) compatible for device fabrication. The size, density and distribution of nC–Si QDs were controlled by optimizing the plasma parameters. Very high electrical conductivity, σ ∼ 4 × 10{sup −2} S cm{sup −1}, was achieved at a total number density of Si-QDs, N ∼ 4.8 × 10{sup 11} cm{sup −2}, corresponding to the lowering in its average core size, d ∼ 3.7 nm, to the order of the bulk Si exciton Bohr radius and the associated quantum confinement effects. The electrical conductivity was demonstrated to exhibit quantum size (3 < d (nm) < 10) effect in zero dimensional quantum dots. The underlying electronic transport was explained using heteroquantum-dot model, the nC–SiO{sub x}:H QDs possess hetero-junction like band structure in the interface regions, due to their different band gaps.

36 MATERIALS SCIENCE↗

Size-controllable porous NiO electrodes for high-performance lithium ion battery anodes

Highlights: • Size-controllable porous NiO electrodes were prepared by a simple thermal oxidation route. • The prepared porous NiO electrodes exhibit high capacity and excellent rate capability and cycling stability. • The smaller nanopore and crystallite size are benefical to improve the electrochemical properties of the porous NiO electrodes. - Abstract: Size-controllable porous NiO electrodes were prepared by a simple and easily scalable thermal oxidation route and were evaluated as anode materials for lithium ion batteries. The nanopore size of the prepared electrodes can be obtained in the range from 20 to 80 nm by varying the thermal oxidation condition. Lithium storage performance measurement showed that porous NiO electrodes exhibit high capacity and excellent rate capability and cycling stability. Furthermore, it was shown that the smaller nanopore and crystallite size are beneficial to improve the electrochemical properties of the porous NiO electrodes.

36 MATERIALS SCIENCE↗

Grain-size dependent mechanical behavior of nanocrystalline metals

Grain size has a profound effect on the mechanical response of metals. Molecular dynamics continues to expand its range from a handful of atoms to grain sizes up to 50 nm, albeit commonly at strain rates generally upwards of 10 6 s -1 . In this work, we examine the most important theories of grain size dependent mechanical behavior pertaining to the nanocrystalline regime. For the sake of clarity, grain sizes d are commonly divided into three regimes: d>1 μm, 1 μm < d < 100 nm; and d<100 nm. These different regimes are dominated by different mechanisms of plastic flow initiation. We focus here in the region d<100 nm, aptly named the nanocrystalline region. An interesting and representative phenomenon at this reduced spatial scale is the inverse Hall–Petch effect observed experimentally and in MD simulations in FCC, BCC, and HCP metals. Significantly, we compare the results of molecular dynamics simulations with analytical models and mechanisms based on the contributions of Conrad and Narayan and Argon and Yip, who attribute the inverse Hall–Petch relationship to the increased contribution of grain-boundary shear as the grain size is reduced. The occurrence of twinning, more prevalent at the high strain rates enabled by shock compression, is evaluated.

36 MATERIALS SCIENCE↗

Size effect on the growth and pulverization behavior of Si nanodomains in SiO anode

Silicon monoxide (SiO) as a promising silicon-based anode electrode of lithium-ion batteries (LIBs) has been the subject of many recent investigations. However, the complex microstructural features of SiO hinder attempts to link the microstructure changes in SiO with its electrochemical performances upon electrochemical cycling. This study employs X-ray pair distribution function (PDF), with a high-resolution transmission electron microscope (HRTEM), to investigate the microstructure of Si nanodomains in SiO and its structural evolution over the electrochemical cycling process. The experiment results reveal the size evolution of Si nanodomains in SiO during the electrochemical cycling and find it highly dependent on the initial Si domain size in SiO. If the initial Si domain size is too large, the average size of Si nanodomains would increase at first and then decrease after a certain number of cycles, which indicates the pulverization of Si domains after the electrochemical-driven growth of Si nanodomains reaches a critical point. Furthermore, these results suggest that an optimal initial Si nanodomain size of 4-6 nm for SiO anode materials is essential to retard the growth and subsequent pulverization process of Si nanodomains and thus to improve the cyclability of SiO during long-term cycling.

25 ENERGY STORAGE↗

Heliostat sizing methodology for concentrating solar thermal industrial process heat projects

This study presents a method to obtain a heliostat size that minimizes the levelized cost of heat (LCOH) of a heliostat-based concentrating solar thermal system for applications of solar heating for industrial processes at operating temperatures from 565 to 1550°C. The method extends prior work by embedding a routine for system design that obtains near-optimal subsystem sizes, increasing the fidelity of drive cost functions, and adding an optical performance model to supplement the previously developed cost models, which we update to reflect current pricing trends. An illustrative business case is developed for Daggett, California, targeting specified annual thermal energy outputs of 50 to 400 GWh th . Optical performance is modeled using verified estimates from the literature. A surrogate heliostat cost model, derived from commercial heliostat designs and scaled for production volume, installation, and operations and maintenance costs, is used to develop cost functions. Results show that heliostat size strongly affects the LCOH, producing a characteristic U-shaped trend with a robust near-optimal window of 7-20 m 2 ; the heliostat size producing the lowest project cost in our study grows slightly as the project size increases, and is reduced as the operating temperature increases. The findings in this study are consistent with the general trend of smaller heliostats being deployed at existing projects for high-temperature industrial process heat and reflect the significant reduction in power electronics and other per-heliostat costs. The methodology we propose is general and can be tailored to revised cost curves as the technology continues to evolve.

14 SOLAR ENERGY↗

Effect of myonuclear number and mitochondrial fusion on Drosophila indirect flight muscle organization and size

Mechanisms involved in establishing the organization and numbers of fibres in a muscle are not completely understood. During Drosophila indirect flight muscle (IFM) formation, muscle growth is achieved by both incorporating hundreds of nuclei, and hypertrophy. As a result, IFMs provide a good model with which to understand the mechanisms that govern overall muscle organization and growth. We present a detailed analysis of the organization of dorsal longitudinal muscles (DLMs), a subset of the IFMs. We show that each DLM is similar to a vertebrate fascicle and consists of multiple muscle fibres. However, increased fascicle size does not necessarily change the number of constituent fibres, but does increase the number of myofibrils packed within the fibres. We also find that altering the number of myoblasts available for fusion changes DLM fascicle size and fibres are loosely packed with myofibrils. Additionally, we show that knock down of genes required for mitochondrial fusion causes a severe reduction in the size of DLM fascicles and fibres. Our results establish the organization levels of DLMs and highlight the importance of the appropriate number of nuclei and mitochondrial fusion in determining the overall organization, growth and size of DLMs. - Highlights: • Drosophila dorsal longitudinal muscles are similar to vertebrate skeletal muscles. • A threshold number of myoblasts governs the organization of a fibre and its size. • Mitochondrial fusion defect leads to abnormal fibre growth and organization.

60 APPLIED LIFE SCIENCES↗

CaCO 3 Crystallite Evolution during CaO Carbonation: Critical Crystallite Size and Rate Constant Measurement by In-Situ Synchrotron Radiation X-ray Powder Diffraction

In this work, the evolution of the CaCO 3 crystalline phase during the CaO–CO 2 reaction was investigated by means of in situ synchrotron radiation X-ray powder diffraction performed at the Advanced Photon Source (APS) facilities of the Argonne National Laboratory. CO 2 absorption experiments were carried out in a high temperature reaction capillary with a controlled atmosphere of pure carbon dioxide (CO 2 partial pressure of 1 bar) and in the temperature range between 450 and 750 °C, using CaO-based sorbents obtained by calcination of commercial calcium carbonate. The Rietveld refinement method was applied to estimate the average size of the CaCO 3 crystallites formed during a carbonation time of 20 min, as a function of the carbonation temperature and of the initial calcination conditions. Local maxima were observed in the CaCO 3 crystallite size versus time curves and were identified as the critical CaCO 3 crystallite sizes, marking the transition between the first fast carbonation stage and the second reaction stage controlled by product-layer diffusion. A relationship between this parameter and the reaction temperature, as well as with the initial (at the beginning of carbonation) CaO crystallite size, were found. The CaCO 3 critical crystallite sizes were used to estimate the active surface areas of the CaO sorbent particles where CaCO 3 crystals form and grow. Here, the computed active surface areas were utilized to calculate the kinetic parameters of the surface carbonation reaction: a reaction rate constant of 4.41 × 10 –4 mol/m 2 s, with zero-activation energy, was obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size, Composition, and Source Profiles of Inhalable Bioaerosols from Colorado Dairies

Particulate matter emissions from agricultural livestock operations contain both chemical and biological constituents that represent a potential human health hazard. The size and composition of these dusts, however, have not been well described. We evaluated the full size distribution (from 0 to 100 μm in aerodynamic diameter) and chemical/biological composition of inhalable dusts inside several Colorado dairy parlors. Four aerodynamic size fractions (<3, 3-10, 10-30, and >30 μm) were collected and analyzed using a combination of physiochemical techniques to understand the structure of bacterial communities and chemical constituents. Airborne particulate mass followed a bimodal size distribution (one mode at 3 μm and a second above 30 μm), which also correlated with the relative concentrations of the following microbiological markers: bacterial endotoxin, 3-hydroxy fatty acids, and muramic acid. Sequencing of the 16S- rRNA components of this aerosol revealed a microbiome derived predominantly from animal sources. Bacterial genera included Staphlyococcus, Pseudomonas, and Streptococcus, all of which have proinflammatory and pathogenic capacity. Our results suggest that the size distribution of bioaerosols emitted by dairy operations extends well above 10 μm in diameter and contains a diverse mixture of potentially hazardous constituents and opportunistic pathogens. These findings should inform the development of more effective emissions control strategies.

Schaeffer, Joshua W↗

Size-Resolved Elemental Composition of Respiratory Particles in Three Healthy Subjects

The chemical composition of respiratory particles is of interest because the viability of any viruses and bacteria in the particles has been shown to depend on this factor. Here, using computer controlled scanning electron microscopy/energy dispersive X-ray spectroscopy (CCSEM/EDX), we analyzed the size-resolved chemical composition of greater than 35,000 individual respiratory particles collected from three healthy human subjects, quantitatively at nanometer-scale spatial resolution. The desiccated particles ranged in size from 0.05 to 4.4 μm, and the mode of the size distribution was approximately 0.1 μm. Particles were heterogeneous in composition, with approximately 42% of them containing a carbon atomic percentage greater than 95% and approximately 53% of them containing a Na + P + K + Cl percentage greater than 5%. Based on the particles’ elemental composition, we classified them into five categories: 48%–56% of the total number were carbonaceous, mostly organic; 40%–50% Na-rich salt; 0.3%–0.5% P-rich salt; 0.1–0.8% K-rich salt; and 1%–2.5% mixed salt. The number ratio of Na-rich salt particles to carbonaceous particles increased with increasing particle size; particles larger than approximately 2 μm were dominated by Na-rich salt. Size-dependent differences in the chemical composition of respiratory particles may have important implications for the efficiency of airborne transmission of respiratory pathogens.

60 APPLIED LIFE SCIENCES↗

Probing Pore Size and Connectivity in Porous Silicas Using 13C MAS NMR Spectroscopy of Supercritical Methane

Measuring the pore size and pore-size distributions and exploring the fluid-exchange dynamics between different types of pores in porous materials remains a significant experimental challenge but is critical to understanding catalysis, chromatography, nutrient cycling, and a whole range of geochemical phenomena, including shale gas and tight gas extraction. Here, we present the results of 1D 13 C NMR and 2D exchange spectroscopy (EXSY) NMR investigations of a porous silica using supercritical methane (scCH 4 ) as a direct probe of pore size and fluid exchange between pore types. The results show that the 13 C chemical shift of scCH 4 adsorbed in nanometer-scale silica pores becomes more negative with increasing pore diameter, in agreement with trends reported for gas hydrates, zeolites, MOFs, and clays and other microporous (<10 nm pores) geochemical materials. These 13 C chemical shifts follow a natural log–linear trend with pore size in the vacuum-dried porous silicas studied here, allowing one to predict pore size based on the 13 C chemical shift in dry silica nanopores. The EXSY and 1D 13 C NMR results both show that CH 4 exchanges between pore and bulk fluid environments over rate scales from 0.01 to 1 kHz in vacuum-dried samples and that exchange dynamics must be considered when interpreting 13 C NMR of pore-adsorbed CH 4 . Introducing H 2 O to the system causes the 13 C chemical shift to become more negative with increasing H 2 O content as a result of H 2 O preferentially filling small pores, forcing CH 4 to occupy larger pores that are better connected to the bulk environment. Likewise, the 1D 13 C data show a decreased distribution of exchange rates between pore-adsorbed and bulk CH 4 in the presence of H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗