Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitivity Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Flexible aircraft dynamic modeling for dynamic analysis and control synthesis

The linearization and simplification of a nonlinear, literal model for flexible aircraft is highlighted. Areas of model fidelity that are critical if the model is to be used for control system synthesis are developed and several simplification techniques that can deliver the necessary model fidelity are discussed. These techniques include both numerical and analytical approaches. An analytical approach, based on first-order sensitivity theory is shown to lead not only to excellent numerical results, but also to closed-form analytical expressions for key system dynamic properties such as the pole/zero factors of the vehicle transfer-function matrix. The analytical results are expressed in terms of vehicle mass properties, vibrational characteristics, and rigid-body and aeroelastic stability derivatives, thus leading to the underlying causes for critical dynamic characteristics.

Schmidt, David K.↗

Numerical and literal aeroelastic-vehicle-model reduction for feedback control synthesis

The simplification of a high-order, literal model for large flexible aircraft is discussed. Areas of model fidelity that are critical if the model is to be used for control law synthesis are presented. Several simplification techniques, some new and some widely available, that can deliver the necessary model fidelity are presented and applied to a model from the literature. The techniques include both numerical and analytical approaches. An analytical approach, based on first-order sensitivity theory, is shown to lead not only to excellent numerical results, but also to closed-form analytical expressions for key system dynamic properties such as the pole/zero factors of the vehicle transfer-function matrix. The analytical results are expressed in terms of vehicle vibrational characteristics and rigid-body and aeroelastic stability derivatives, thus providing insight into the underlying causes for critical dynamic characteristics.

Newman, Brett↗

Direct correlation of test-analysis cross-orthogonality

This paper presents an alternative to the correlation of individual components of a mode shape vectors by directly examining the sensitivity of the cross-orthogonality between test and analytical mode shapes. If the test and analysis mode shapes are identical, the diagonal elements of the cross-orthogonality will be identical to the test orthogonality matrix, so the cross-orthogonality matrix provides a concise measure of the 'closeness' between test and analysis mode shapes. There are two major advantages to the cross-orthogonality correlation approach. The first is that a direct correlation of this matrix will more directly meet the goal of the correlation effort (measured by cross-orthogonality). Secondly, and more importantly, the correlation of cross-orthogonality greatly reduces the amount of data that needs to be handled when compared to the correlation of mode shapes.

Blelloch, P. A.↗

Hot-wire calibration in subsonic/transonic flow regimes

A different approach for calibrating hot-wires, which simplifies the calibration procedure and reduces the tunnel run-time by an order of magnitude was sought. In general, it is accepted that the directly measurable quantities in any flow are velocity, density, and total temperature. Very few facilities have the capability of varying the total temperature over an adequate range. However, if the overheat temperature parameter, a(sub w), is used to calibrate the hot-wire then the directly measurable quantity, voltage, will be a function of the flow variables and the overheat parameter i.e., E = f(u,p,a(sub w), T(sub w)) where a(sub w) will contain the needed total temperature information. In this report, various methods of evaluating sensitivities with different dependent and independent variables to calibrate a 3-Wire hot-wire probe using a constant temperature anemometer (CTA) in subsonic/transonic flow regimes is presented. The advantage of using a(sub w) as the independent variable instead of total temperature, t(sub o), or overheat temperature parameter, tau, is that while running a calibration test it is not necessary to know the recovery factor, the coefficients in a wire resistance to temperature relationship for a given probe. It was deduced that the method employing the relationship E = f (u,p,a(sub w)) should result in the most accurate calibration of hot wire probes. Any other method would require additional measurements. Also this method will allow calibration and determination of accurate temperature fluctuation information even in atmospheric wind tunnels where there is no ability to obtain any temperature sensitivity information at present. This technique greatly simplifies the calibration process for hot-wires, provides the required calibration information needed in obtaining temperature fluctuations, and reduces both the tunnel run-time and the test matrix required to calibrate hotwires. Some of the results using the above techniques are presented in an appendix.

Nagabushana, K. A.↗

Dynamic Forms and Their Application to Control

The rigid body model plays a basic role in both mod- and control of many systems, including aircraft flight control. The distinctive feature of the rigid body is that its motion evolves on a curved space, Consequently, the designer must take into account the deterioration of chosen coordinations near their singularities. In these regions the control actions and the sensitivity to modeling and sensor errors become unacceptable. Thus, coordinate patches and patching logic should be a part of the overall control law design and implementation. The various dynamic forms, such as scalar forms, vector forms, matrix forms, rotational forms, Euler angle forms, and Euler parameter forms, described in the paper provide an effective means for coordinate patching and control law implementation. The utility of these forms is illustrated by means of several applications to flight control.

Meyer, George↗

LISA Parameter Estimation using Numerical Merger Waveforms

Coalescing supermassive black holes are expected to provide the strongest sources for gravitational radiation detected by LISA. Recent advances in numerical relativity provide a detailed description of the waveforms of such signals. We present a preliminary study of LISA's sensitivity to waveform parameters using a hybrid numerical/analytic waveform describing the coalescence of two equal-mass, nonspinning black holes. The Synthetic LISA software package is used to simulate the instrument response and the Fisher information matrix method is used to estimate errors in the waveform parameters. Initial results indicate that inclusion of the merger signal can significantly improve the precision of some parameter estimates. For example, the median parameter errors for an ensemble of systems with total redshifted mass of 10(exp 6) deg M solar mass at a redshift of z is approximately 1 were found to decrease by a factor of slightly more than two when the merger was included.

Thorpe, J. I.↗

ESO Diffuse Interstellar Bands Large Exploration Survey (EDIBLES) - Merging Observations and Laboratory Data

The Diffuse Interstellar Bands (DIBs) are a set of ~500 absorption bands that are detected in the spectra of stars with interstellar clouds in the line of sight. DIBs are found from the NUV to the NIR in the spectra of reddened stars spanning different interstellar environments in our local, and in other galaxies. DIB carriers are a significant part of the interstellar chemical inventory. They are stable and ubiquitous in a broad variety of environments and play a unique role in interstellar physics/chemistry. It has long been realized that the solving of the DIB problem requires a strong synergy between astronomical observations, laboratory astrophysics, and astrophysical modeling of line-of-sights. PAHs are among the molecular species that have been proposed as DIB carriers. We will present an assessment of the PAH-DIB model in view of the progress and the advances that have been achieved over the past years through a series of studies involving astronomical observations of DIBs, laboratory simulation of interstellar analogs for neutrals and ionized PAHs, theoretical calculations of PAH spectra and the modelization of diffuse and translucent interstellar clouds. We will present a summary of what has been learned from these complementary studies, the constraints that can now be derived for the PAHs as DIB carriers in the context of the PAH-DIB model and how these constraints can be applied to the EDIBLES project. The spectra of several neutral and ionized PAHs isolated in the gas phase at low temperature have been measured in the laboratory under experimental conditions that mimic interstellar conditions and are compared with an extensive set of astronomical spectra of reddened, early type stars. The comparisons of astronomical and laboratory data provide upper limits for the abundances of specific neutral PAH molecules and ions along specific lines-of-sight. Something that is not attainable from infrared observations alone. We present the characteristics of the laboratory facilities, MIS and COSmIC, that have been developed for this study and discuss the findings resulting from the comparison of the laboratory data with high resolution, high S/N ratio astronomical observations. MIS stands for Matrix Isolation Spectroscopy, a well-proven technique for isolating cold molecular species in inert solid environments. COSmIC stands for Cosmic Simulation Chamber. It combines a supersonic free jet expansion with discharge plasma and high-sensitivity cavity ringdown spectroscopy and time-of-flight mass spectrometry detection tools for the generation and the detection of cold, isolated gas-phase molecules and ions under experimental conditions that closely mimic interstellar conditions. The column densities of the individual neutral PAH molecules and ions probed in these surveys are derived from the comparison of these unique laboratory data with high resolution, high S/N ratio astronomical observations. The comparisons of astronomical and laboratory data lead to clear and unambiguous conclusions regarding the expected abundances for PAHs of various sizes and charge states in the interstellar environments probed in the surveys. Band profile comparisons between laboratory and astronomical spectra lead to information regarding the molecular structures and characteristics associated with the DIB carriers in the corresponding lines-of-sight. These quantitative surveys of neutral and ionized PAHs in the optical range open the way for unambiguous quantitative searches of PAHs and complex organics in a variety of interstellar and circumstellar environments.

astrophysics↗

Stepwise spectral swapping with three neutrino flavors

We develop a framework for studying collective three-flavor neutrino oscillations based on the density matrix formalism. We show how techniques proven useful for collective two-flavor neutrino oscillations such as corotating frames can be applied readily to three-flavor mixing. Applying two simple assumptions and the conservation of two 'lepton numbers', we use this framework to demonstrate how the adiabatic/precession solution emerges. We illustrate with a numerical example how two stepwise spectral swaps appear naturally if the flavor evolution of the neutrino gas can be described by such a solution. For the special case where mu and tau flavor neutrinos are equally mixed and are produced with identical energy spectra and total numbers, we find that one of the spectral swaps in the three-flavor scenario agrees with that in the two-flavor scenario when appropriate mixing parameters are used. Using the corotating-frame technique we show how the adiabatic/precession solution can obtain even in the presence of a dominant ordinary matter background. With this solution we can explain why neutrino spectral swapping can be sensitive to deviations from maximal 23-mixing when the 'mu-tau' matter term is significant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Few Group Collapsing of Covariance Matrix Data Based on a Conservation Principle

A new algorithm for a rigorous collapsing of covariance data is proposed, derived, implemented, and tested. The method is based on a conservation principle that allows the uncertainty calculated in a fine group energy structure for a specific integral parameter, using as weights the associated sensitivity coefficients, to be preserved at a broad energy group structure.

99 GENERAL AND MISCELLANEOUS↗

Five Micron High Resolution MALDI Mass Spectrometry Imaging with Simple, Interchangeable, Multi-Resolution Optical System

High-spatial resolution mass spectrometry imaging (MSI) is crucial for the mapping of chemical distributions at the cellular and subcellular level. In this work, we improved our previous laser optical system for matrix-assisted laser desorption ionization (MALDI)-MSI, from ~9 μm practical laser spot size to a practical laser spot size of ~4 μm, thereby allowing for 5 μm resolution imaging without oversampling. This is accomplished through a combination of spatial filtering, beam expansion, and reduction of the final focal length. Most importantly, the new laser optics system allows for simple modification of the spot size solely through the interchanging of the beam expander component. Using 10×, 5×, and no beam expander, we could routinely change between ~4, ~7, and ~45 μm laser spot size, in less than 5 min. We applied this multi-resolution MALDI-MSI system to a single maize root tissue section with three different spatial resolutions of 5, 10, and 50 μm and compared the differences in imaging quality and signal sensitivity. We also demonstrated the difference in depth of focus between the optical systems with 10× and 5× beam expanders. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Inherent paramagnetic defects in layered Si/SiO{sub 2} superstructures with Si nanocrystals

An extensive electron spin resonance (ESR) analysis has been carried out on structures comprised of Si nanoparticles ({approx}2 nm across) embedded in a regular pattern in an amorphous SiO{sub 2} matrix, fabricated by the SiO/SiO{sub 2} superlattice approach, with the intent to reveal and quantify occurring paramagnetic defects. The as-grown state is found to exhibit only a Si dangling bond (DB) signal, which through combination of first and second harmonic X-, K-, and Q-band observations in combination with computer spectra simulation, could be conclusively disentangled as solely comprised of overlapping powder pattern spectra of P{sub b(0)} and P{sub b1} defects, the archetypal intrinsic defects of the Si/SiO{sub 2} interface, with no evidence for a D line (Si DBs in disordered Si). This indicates a full crystalline system of randomly oriented Si nanocrystals (NCs). The P{sub b(0)}/P{sub b1} defect system, pertaining to the NC-Si/SiO{sub 2} interfaces, is found to be both qualitatively and quantitatively much alike that of standard (high-quality) thermal Si/SiO{sub 2}. The system is inherent, remaining unaffected by subsequent UV/vacuum UV irradiations. Relying on the known properties of P{sub b}-type defects in standard microscopic Si/SiO{sub 2}, the data would comply with Si nanocrystallites, in average, predominantly bordered by (111) and (100) facets, perhaps with morphology, schematically, of [100] truncated (111) octahedrons. Based on independent NC particles counting, there appears a P{sub b}-type center at {approx}71% of the Si NCs indicating the latter to be comprised of two subsystems-with or without an incorporated strain relaxing interface defect-which in that case will exhibit drastically different defect-sensitive properties, such as, e.g., photoluminescence (PL). Upon additional optical irradiation, two more defects appear, i.e., the SiO{sub 2}-associated E{sub {gamma}}{sup '} and EX centers, where the observed density of the former, taken as criterion, indicates the SiO{sub 2} matrix to be of standard thermal oxide quality. Thus, the properties of the revealed crucial intrinsic point defects bear out a high quality of both the NC-Si/SiO{sub 2} interfaces and the embedding SiO{sub 2}, alike that of standard thermal Si/SiO{sub 2}. In combination with H passivation/depassivation treatments, the degrading impact of the optical excitation ({approx}360 nm) itself used during PL measurements has been studied, revealing weak ESR reactivation of P{sub b(0)}, P{sub b1}, and E{sub {gamma}}{sup '} defects.

36 MATERIALS SCIENCE↗

The Optical Properties of Metamaterial-Superconductor Photonic Band Gap With/Without Defect Layer

In the present work, we have investigated theoretically the optical properties of a new one-dimensional defected photonic crystal structure (1DDPC). The structure is composed of alternating layers of metamaterial (double-negative material) and high Tc superconductor material called Hg1223 defected with a dielectric material (SiO{sub 2}) at the center of the structure. The transmittance spectra of the proposed structure are obtained by using the transfer matrix method (TMM). We noticed that multiple transmittance peaks within the photonic band gap (PBG) as the thickness of defect layer increases. The tunable filtering feature is obtained by varying the thicknesses of metamaterial and superconductor layer. In addition, the defect peak is red shifted as well as photonic band gap tuned to low-frequency region. Our structure is sensitive to the variation of the angle incidence. Also, defect mode shown to be blue shifted as the angle of incidence increases. The tunable filtering properties are very useful in the optoelectronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Base Heating Sensitivity Study for a 4-Cluster Rocket Motor Configuration in Supersonic Freestream

In support of launch vehicle base heating and pressure prediction efforts using the Loci-CHEM Navier-Stokes computational fluid dynamics solver, 35 numerical simulations of the NASA TND-1093 wind tunnel test have been modeled and analyzed. This test article is composed of four JP-4/LOX 500 lbf rocket motors exhausting into a Mach 2 - 3.5 wind tunnel at various ambient pressure conditions. These water-cooled motors are attached to a base plate of a standard missile forebody. We explore the base heating profiles for fully coupled finite-rate chemistry simulations, one-way coupled RAMP (Reacting And Multiphase Program using Method of Characteristics)-BLIMPJ (Boundary Layer Integral Matrix Program - Jet Version) derived solutions and variable and constant specific heat ratio frozen flow simulations. Variations in turbulence models, temperature boundary conditions and thermodynamic properties of the plume have been investigated at two ambient pressure conditions: 255 lb/sq ft (simulated low altitude) and 35 lb/sq ft (simulated high altitude). It is observed that the convective base heat flux and base temperature are most sensitive to the nozzle inner wall thermal boundary layer profile which is dependent on the wall temperature, boundary layer s specific energy and chemical reactions. Recovery shock dynamics and afterburning significantly influences convective base heating. Turbulence models and external nozzle wall thermal boundary layer profiles show less sensitivity to base heating characteristics. Base heating rates are validated for the highest fidelity solutions which show an agreement within +/-10% with respect to test data.

Mehta, Manish↗

Differentiation of C2C12 myoblasts expressing lamin A mutated at a site responsible for Emery-Dreifuss muscular dystrophy is improved by inhibition of the MEK-ERK pathway and stimulation of the PI3-kinase pathway

Mutation R453W in A-type lamins, that are major nuclear envelope proteins, generates Emery-Dreifuss muscular dystrophy. We previously showed that mouse myoblasts expressing R453W-lamin A incompletely exit the cell cycle and differentiate into myocytes with a low level of multinucleation. Here we attempted to improve differentiation by treating these cells with a mixture of PD98059, an extracellular-regulated kinase (ERK) kinase (also known as mitogen-activated kinase, MEK) inhibitor, and insulin-like growth factor-II, an activator of phosphoinositide 3-kinase. We show that mouse myoblasts expressing R453W-lamin A were sensitive to the drug treatment as shown by (i) an increase in multinucleation, (ii) downregulation of proliferation markers (cyclin D1, hyperphosphorylated Rb), (iii) upregulation of myogenin, and (iv) sustained activation of p21 and cyclin D3. However, nuclear matrix anchorage of p21 and cyclin D3 in a complex with hypophosphorylated Rb that is critical to trigger cell cycle arrest and myogenin induction was deficient and incompletely restored by drug treatment. As the turn-over of R453W-lamin A at the nuclear envelope was greatly enhanced, we propose that R453W-lamin A impairs the capacity of the nuclear lamina to serve as scaffold for substrates of the MEK-ERK pathway and for MyoD-induced proteins that play a role in the differentiation process.

60 APPLIED LIFE SCIENCES↗

Multi-scale investigation of heterogeneous swift heavy ion tracks in stannate pyrochlore

Er 2 Sn 2 O 7 pyrochlore was irradiated with swift heavy Au ions (2.2 GeV), and the induced structural modifications were systematically examined using complementary characterization techniques including transmission electron microscopy (TEM), X-ray diffraction (XRD), and neutron total scattering with pair distribution function (PDF) analysis. Each technique probes different aspects and length scales of the transformed material regions. TEM revealed a core–shell ion track structure—an amorphous core surrounded by a disordered, anion-deficient fluorite shell—which was confirmed by XRD. Neutron total scattering, with sensitivity to the oxygen sublattice, provided relative fractions of amorphous and disordered fluorite phases and confirmed the presence of a defective pyrochlore phase, which largely maintains its structural ordering but is clearly distinct from the pristine pyrochlore matrix. This defect-rich pyrochlore phase forms a halo extending radially beyond the well-characterized core–shell track morphology observed in electron micrographs. Despite their differing long-range periodicity, the short-range structures of the amorphous, disordered, and defective pyrochlore phases are all modeled well with a weberite-type configuration. Evolution of the phase fractions with increasing ion fluence was examined to ascertain the phase-to-phase pathways that occur during primary and secondary ion impact. Furthermore, this approach extends knowledge about the multi-scale response of stannate pyrochlores to swift heavy ion irradiation in the electronic energy loss regime and improves existing track-overlap models.

36 MATERIALS SCIENCE↗

Carbon nanotube substrates enhance SARS-CoV-2 spike protein ion yields in matrix-assisted laser desorption–ionization mass spectrometry

Nanostructured surfaces enhance ion yields in matrix-assisted laser desorption–ionization mass spectrometry (MALDI-MS). The spike protein complex, S1, is one fingerprint signature of Sars-CoV-2 with a mass of 75 kDa. Here, we show that MALDI-MS yields of Sars-CoV-2 spike protein ions in the 100 kDa range are enhanced 50-fold when the matrix–analyte solution is placed on substrates that are coated with a dense forest of multi-walled carbon nanotubes, compared to yields from uncoated substrates. Nanostructured substrates can support the development of mass spectrometry techniques for sensitive pathogen detection and environmental monitoring.

60 APPLIED LIFE SCIENCES↗

Electron-impact ionization excitation of helium in the quasiphoton regime

The triply differential cross section of ionization excitation of helium, leaving the residual ion in the n=2 excited states, is evaluated for the kinematics considered experimentally by Dupreet al. [J. Phys. B 25, 259 (1992)]. The interaction of the incident electron with the target is described at the first order, while the interaction of the ejected electron with the residual ion is treated very accurately within the formalism of the Jacobi matrix method. In the quasiphoton limit and for low ejected electron energies, the presence of series of doubly excited states, mainly below the n=3 single ionization threshold in helium, makes the triply differential cross sections extremely sensitive to both the energy and the emission angle of the ejected electron. We show that the convolution of our results with a Gaussian energy profile, in which the full width at half-maximum corresponds to the energy resolution in the experiment, has a significant effect. Our results suggest that it is also important to account for the finite resolution on the measurement of the scattering angle when the experimental data are compared to the theoretical predictions. Comparison of our theoretical results convoluted both in energy and in angle with the experimental data demonstrates the importance of an accurate description of the helium spectrum. A possible two-step mechanism involving single ionization of the target followed by excitation of the core electron is proposed to explain the remaining discrepancies.

74 ATOMIC AND MOLECULAR PHYSICS↗

The ETROC2 as the Final Version for CMS Endcap Timing Layer (ETL) Upgrade

The ETROC (Endcap Timing Readout Chip) is being developed for the LGAD-based CMS Endcap Timing Layer (ETL) at HL-LHC. The ETL on each side of the interaction region will be instrumented with a two-disk system of MIP-sensitive LGAD (Low Gain Avalanche Diodes) silicon devices, read out by ETROCs for precision timing measurement with down to ~30 ps timing resolution per track. The ETROC is designed to handle a 16 x 16 pixel cell matrix, with each pixel being 1.3 mm x 1.3 mm to match the LGAD sensor pixel size. The front-end design for preamplifier and discriminator has been specifically optimized for the reduced LGAD signals, with enough flexibilities to meet the ETL specific needs for time resolution, power budget and radiation profile. The ETROC chip is implemented in a commercial 65nm CMOS process. Each channel consists of a preamplifier, a discriminator, a TDC used for TOA (Time Of Arrival) and TOT (Time Over Threshold) measurements, and a memory for data storage and readout. An in-pixel auto threshold calibration is included, along with a self-testing pattern generator. The TOT is used for time-walk correction of the TOA measurement. The detailed hit information (TOA and TOT) from each cell will be read out from a local circular buffer after each Level-1 Accept (about 1 MHz). In addition, a charge injection circuit is implemented to allow for testing and calibration. For more detailed monitoring of the signal pulses, waveform sampling circuits are included for one pixel. The clock distribution is based on a 16x16 H-tree design with a shielding structure to alleviate potential interference. The global peripheral circuits include a PLL, a phase shifter, an I2C slave controller, a fast control block, a global readout, and a data driver along with an efuse and temperature sensor. The ETROC builds event data frames for each L1A selected event and is also capable of providing L1 trigger information for user-defined delayed hits. The main design challenge is how to extract precision timing information from the small LGAD signals in the presence of high irradiation fluence, while keeping the power consumption and digital activity low. The ETL design goal for the time resolution of 50 ps per hit is required to achieve a 35 ps arrival time measurement for a MIP particle, which has its track registered in two ETL disk layers. The LGAD contribution is known to be about 30 ps, this means that the jitter from the ETROC has to be kept below 40 ps. The ETROC2 is the first full size full functionality prototype design fully compatible with the final chip specifications for CMS ETL and now becomes the final version. The ETROC2 chips have been extensively tested. We will present here new testing results including the bump bonding yield improvement study, the time walk correction (TWC) generality study with one pixel TWC applying to all pixels, the final SEU testing using both heavy ion and proton beam, more beam test studies including different sensors, and readiness for the ETROC2 production for CMS ETL upgrade.

Liu, Tiehui [Fermilab] (ORCID:0009000765225605)↗