Structure and magnetic properties of the pyrochlore iridate Y 2 Ir 2 O 7
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
High temperature material property data for structural materials used in existing Light Water Reactors (LWRs) are limited. Often, extrapolated values recommended in the literature differ significantly. To reduce such uncertainties, new data for SA533 Grade B, Class 1 (SA533B1) low alloy steel, Stainless Steel 304 (SS304), and Inconel 600, found in Light Water Reactor (LWR) vessels and penetrations, were acquired and tested using material property systems available at the High Temperature Test Laboratory (HTTL) at the Idaho National Laboratory (INL). Properties measured include thermal expansion, specific heat capacity, and thermal diffusivity for temperatures up to 1200 oC. From these results, thermal conductivity and density were calculated. Results show that, in some cases, previously recommended values for these material differ significantly from measured values at high temperatures. This is especially true for SA533B1, as previous data do not account for the phase transformation of this material between 740 oC and 840 oC.
Avena sativa oat is a cereal widely used as human food and livestock feed. However, the low metabolized energy and the rapid rumen degradations of protein and starch have limited the use of A. sativa oat grains. To overcome this disadvantage, new A. sativa oat varieties have been developed. Additionally, heat-related processing has been performed to decrease the degradation rate and improve the absorption of amino acids in the small intestine. The nutritive value is reflected by both chemical composition and inherent molecular structure conformation. However, the traditional wet chemical analysis is not able to detect the inherent molecular structures within an intact tissue. The advanced synchrotron-radiation and globar-based molecular microspectroscopy have been developed recently and applied to study internal molecular structures and the processing induced structure changes in A. sativa oats and reveal how molecular structure changes in relation to nutrient availability. This review aimed to obtain the recent information regarding physiochemical properties, molecular structures, metabolic characteristics of protein, and the heat-induced changes in new A. sativa oat varieties. The use of the advanced vibrational molecular spectroscopy was emphasized, synchrotron- and globar-based (micro)spectroscopy, to reveal the inherent structure of A. sativa oats at cellular and molecular levels and to reveal the heat processing effect on the degradation characteristics and the protein molecular structure in A. sativa oats. The relationship between nutrient availability and protein molecular inherent structure was also presented. Information described in this review gives better insight in the physiochemical properties, molecular structure, and the heat-induced changes in A. sativa oat detected with advanced molecular spectroscopic techniques in combinination with conventional nutrition study techniques.
Relativistic, infinite order exact two-component, density functional theory electronic structure calculations were performed for MCl{sub 4} and MOCl{sub 2} of group-4 elements Ti, Zr, Hf, and element 104, Rf, with the aim to predict their behaviour in gas-phase chromatography experiments. RfCl{sub 4} and RfOCl{sub 2} were shown to be less stable than their lighter homologs in the group, tetrachlorides and oxychlorides of Zr and Hf, respectively. The oxychlorides turned out to be stable as a bent structure, though the stabilization energy with respect to the flat one (C{sub 2v}) is very small. The trend in the formation of the tetrachlorides from the oxychlorides in group 4 is shown to be Zr < Hf < Rf, while the one in the formation of the oxychlorides from the chlorides is opposite. All the calculated properties are used to estimate adsorption energy of these species on various surfaces in order to interpret results of gas-phase chromatography experiments, as is shown in Paper II.
The electronic structure and mechanical and optical properties of five pyrophosphate crystals with very complex structures are studied by first principles density functional theory calculations. The results show the complex interplay of the minor differences in specific local structures and compositions can result in large differences in reactivity and interaction that are rare in other classes of inorganic crystals. These are discussed by dividing the pyrophosphate crystals into three structural units. H 2 P 2 O 7 is the most important and dominating unit in pyrophosphates. The other two are the influential cationic group with metals and water molecules. The strongest P-O bond in P 2 O 5 is the strongest bond for crystal cohesion, but O-H and N-H bonds also play an important part. Different type of bonding between O and H atoms such as O-H, hydrogen bonding, and bridging bonds are present. Metallic cations such as Mg, Zn, and Cu form octahedral bonding with O. The water molecule provides the unique H∙∙∙O bonds, and metallic elements can influence the structure and bonding to a certain extent. The two Cu-containing phosphates show the presence of narrow metallic bands near the valence band edge. All this complex bonding affects their physical properties, indicating that fundamental understanding remains an open question.
The structural properties and electronic structures of pentacoordinated uranyl complexes belonging to the [UO₂Fn(H₂O) 5-n ] 2-n series have been studied in the gas and aqueous phases using density functionals with relativistic pseudopotentials and all-electron basis sets in the gas-phase calculations in combination with COSMO in the aqueous phase. In addition, the conformational orientation and structural and electronic properties of [UO₂F₅]³¯ in the hydrophobic cavities of the right-handed coiled-coil (RHCC) protein of tetrabrachion have been determined using the hybrid QM/MM method. Although there is good agreement between the available experimental geometrical parameters and the values obtained in the aqueous phase using pseudopotentials or all-electron basis sets, variation of the uranyl U=O bond with the number of fluoride ligands is only truly captured after the inclusion of five water molecules in the second coordination sphere around the molecules. The docking procedure used in this work shows that there are only two possible orientations of the uranyl group of [UO₂F₅]³¯ embedded in the hydrophobic cavities of the RHCC protein. The two orientations are exclusively along the axes perpendicular to the protein axial channel with no possible orientation of the uranyl group along the axial channel because of both steric effects and interaction with the alkyl chain of the isoleucine residues pointing into the axial channel. In addition, the embedded complex is always positioned nearer to the isoleucine residues at the N-terminal ends of the hydrophobic cavities. Energy analysis, however, reveals that both conformations can only be observed in cavity 2, the largest hydrophobic cavity. The structural and electronic properties of the ligand embedded in this cavity are very similar to those of the gas-phase structure. A comparable study of [Pt(CN)₆]²¯ and the anticancer drug cisplatin, [PtCl₂(NH₃)₂], in cavity 2, revealed the existence of just two orientations for the former, similar to the uranyl complex, and multiple orientations for the latter.
The electronic structures and thermodynamic properties of LaPtIn and CePtIn are studied by means of ab-initio full-relativistic full-potential local orbital basis (FPLO) method within densities functional (DFT) methodologies. We have also examined the influence of hydrogen on the electronic structure and stability of CePtInH and LaPtInH systems. The positions of the hydrogen atoms have been found from the minimum of the total energy. Our calculations have shown that band structure and topology of the Fermi surfaces changed significantly during the hydrogenation. The thermodynamic properties (bulk modulus, Debye temperatures, constant pressure heat capacity) calculated in quasi-harmonic Debye-Grüneisen model are in a good agreement with the experimental data. We have applied different methods of the calculation of the equation of states (EOS) (Murnaghan, Birch-Murnaghan, Poirier–Tarantola, Vinet). The thermodynamic properties are presented for the pressure 0<P<9 GPa and the temperature range 0<T<300 K. - Highlights: • Full relativistic band structure of LaPtIn and CePtIn. • Fermi surface of LaPtIn, LaPtInH, CePtIn, CePtInH. • Effect of hydrogenation on the electronic structure of LaPtIn and CePtIn. • Thermodynamic properties in the quasi-harmonic Debye-Grüneisen model.
This paper deals with structure and properties of aluminum alloy 7475 and its joints obtained by friction stir welding including under ultrasonic action. Microhardness measurements show that ultrasonic action increases strength properties of the joints. Optical and transmission electron microscopy reveals that this effect is related to the precipitation of tertiary coherent S-and T-phase particles.
The structure and properties of the strengthening phases formed during aging in an Al-Cu-Li-Ag-Mg alloy (Weldalite 049) were elulcidated, by following the development of the microstructure by means of TEM. The results of observations showed that the Weldalite 049 alloy has a series of unusual and technologically useful combinations of mechanical properties in different aging conditions, such as natural aging without prior cold work to produce high strengths, a reversion temper of lower yield strength and unusually high ductility, a room temperature reaging of the reversion temper eventually leading to the original T4 hardness, and ultrahigh-strength T6 properties.
The chemical flexibility of the 𝑅𝑀 6 𝑋 6 stoichiometry, where an 𝑓-block element is intercalated in the CoSn structure type, allows for the tuning of flatbands associated with kagome lattices to the Fermi level and for emergent phenomena due to interactions between the 𝑓- and 𝑑-electron lattices. Yet, 5𝑓 members of the “166” compounds are underrepresented compared with 4𝑓 members. In this work, we report single-crystal growth of UCr 6 Ge 6 , which crystallizes in a monoclinically distorted Y 0.5 Co 3 Ge 3 -type structure. The real-space character of the modulation, which is unique within the 𝑅𝑀 6 𝑋 6 family, is approximated by a 3×1×2 supercell of the average monoclinic cell. The compound has kagome-lattice flatbands near the Fermi level and a moderately enhanced electronic heat capacity, as evidenced by its low-temperature Sommerfeld coefficient (𝛾=86.5 mJ mol −1 K −2 ) paired with band structure calculations. The small, isotropic magnetization and featureless resistivity of UCr 6 Ge 6 suggest itinerant uranium 5𝑓 electrons and Pauli paramagnetism. Angle-resolved photoemission spectroscopy results provide evidence for uranium 5𝑓 weight at the Fermi level and for a flatband near the Fermi level associated with the chromium 3𝑑 kagome lattice. The isotropic magnetic behavior of the uranium 5𝑓 electrons starkly contrasts with localized behavior in other uranium 166 compounds, highlighting the high tunability of the magnetic ground state across the material family.
The objective of this project is to measure the hydrogen-affected fracture properties of structural welded metals exposed to hydrogen isotopes. The main goal of FY16 was to evaluate low-temperature effects on fracture properties of stainless steel welds pre-charged with hydrogen. Forged stainless steels consisting of 316L, 304L, and 21-6-9 welded with 308L filler metal were pre-charged and tested at 223 K at select displacement rates to evaluate fracture behavior over the lower STS temperature range. Reductions in fracture thresholds were observed for all stainless steel welds when samples were precharged with hydrogen; however, temperature effects were not observed in the 304L and 21-6-9 welds. Only 316L exhibited enhanced degradation at 223 K. In addition to fracture testing, tensile specimens were extracted from the weld region and tested at 296 K and 223 K in the hydrogen pre-charged condition. A slight increase in yield strength was measured in the pre-charged condition at 296K and 223 K for the three different welds. A reduction in total elongation of 3-11% was observed at 296 K, whereas reductions in total elongation from 50-64% were observed at 223 K. Microhardness and ferrite numbers were measured in the weld regions to try to elucidate the factors affecting fracture. Lastly, in collaboration with Savannah River National Laboratory (SRNL), weld and heat-affected zone bend specimens extracted from forged 304L and 21-6-9 stainless steel were supplied to SRNL and are in the final stages of sample preparation for subsequent tritium exposure, aging, and fracture testing. The collection of testing completed and planned between Sandia and SRNL contributes to the development of a comprehensive database of properties for materials as a function of hydrogen-isotope concentrations.
The requisite properties of a parachute cloth are discussed and the methods for measuring these properties described. In addition to the structural analysis of the cloths, the properties measured were weight, breaking strength, tear resistance, elasticity, and air permeability. Thirty-six silk cloths of domestic manufacture, not previously used in parachute construction are compared with some silk cloths of foreign manufacture. These foreign cloths were ones proven by trial and extended use to be suitable materials for parachute construction. Contrary to the belief that domestic woven cloths were not suitable materials for parachute construction, it is shown that many domestic silk cloths are satisfactory and in some respects superior to the foreign products. Based on a comparative study of all the cloths, specifications are drawn for the manufacture of silk parachute cloth.
Correction for ‘The solvation structure, transport properties and reduction behavior of carbonate-based electrolytes of lithium-ion batteries' by Tingzheng Hou et al. , Chem. Sci. , 2021, 12 , 14740–14751, https://doi.org/10.1039/D1SC04265C.
Calculations were carried out to investigate energy- and structure-related properties for the (100) surfaces of beta-SiC. Investigations for both C- and Si-terminated planes include (1 x 1), (2 x 1) and c(2 x 2) surface phases. All calculations were performed employing the empirical Tersoff function developed for SiC systems. This function has been used on several occasions, with varying sets of parameters to calculate properties for systems containing Si and C atoms. Here a comparative study was conducted. Results obtained from different sets of parameters were compared with respect to each other and also with values from the literature. Suitabilities and limitations of each parameter set were delineated.
Direct study of changes in catalyst structure-kinetic properties during redox transitions using a new time-resolved technique The Temporal Analysis of Products (TAP) pulse response methodology1 is a transient technique offering the time scale needed to deconvolve many reaction steps from the complex network typical to industrial catalytic processes. The traditional TAP measurement observes the gas phase dynamic response but, hereto now, has been devoid of any direct measurement of change in the catalyst itself. The development of an operando technique that couples gas phase transient kinetics to dynamic metal centers and surface species is presented. Significance Unification of the TAP methodology with time-resolved spectroscopic measurement can offer unprecedented insight into the complex kinetic phenomena regulated by the solid catalyst.
We present a combined experimental and theoretical study to analyze the structure, electronic properties, and aggregation behavior of hydroxylated multiwalled carbon nanotubes (OH–MWCNT). Our MWCNTs have average diameters of ∼2 nm, lengths of approximately 100–300 nm, and a hydroxyl surface coverage θ∼0.1. When deposited on the air/water interface the OH–MWCNTs are partially soluble and the floating units interact and link with each other forming extended foam-like carbon networks. Surface pressure-area isotherms of the nanotube films are performed using the Langmuir balance method at different equilibration times. The films are transferred into a mica substrate and atomic force microscopy images show that the foam like structure is preserved and reveals fine details of their microstructure. Density functional theory calculations performed on model hydroxylated carbon nanotubes show that low energy atomic configurations are found when the OH groups form molecular islands on the nanotube's surface. This patchy behavior for the OH species is expected to produce nanotubes having reduced wettabilities, in line with experimental observations. OH doping yields nanotubes having small HOMO–LUMO energy gaps and generates a nanotube → OH direction for the charge transfer leading to the existence of more hole carriers in the structures. Our synthesized OH–MWCNTs might have promising applications.
With the objective of developing new near-infrared fluorescent probes and understanding the effect molecular structure exerts on physical properties, a series of aniline-based squaraine dyes with different number and position of methoxy substituents adjacent to the squaraine core were synthesized and investigated. Using both computational and experimental methods, we found that the subtle changes of the number or position of the methoxy substituents influenced the twisting angle of the structure and led to significant variations in optical properties. Moreover, the methoxy substituent also affected aggregation behavior due to steric effects. The X-ray crystal structure of one of the key members of the series, SD-2a, clearly demonstrates the distortion between the four-membered squaraine core and the adjacent aniline ring due to methoxy substitution. Structure-related fast relaxation processes were investigated by femtosecond pump–probe experiments and transient absorption spectra. Quantum chemical calculations and essential state models were exploited to analyze the primary experimental results. Here, the comprehensive investigation of structure-related properties of dihydroxylaniline-based squaraine dyes, with systematic substitution of OH by OCH 3 functional groups, serves as a guide for the design of novel squaraine dyes for photonics applications.