Search NASA⌕ Search

SEARCH · Search NASA

Results for “TARGET SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Fully nonlinear δf gyrokinetics for scrape-off layer parallel transport

Edge plasmas present a few challenges for gyrokinetic simulations that are absent in tokamak cores. Among them are large fluctuation amplitudes and plasma-wall interactions in the open field line region. In this work, the widely used core turbulence code GENE, which employs a δf -splitting technique, is extended to simulate open systems with large electrostatic fluctuations. With inclusion and proper discretization of the parallel nonlinear term, it becomes equivalent to a full- f code and the δf -splitting causes no fundamental difficulty in handling large fluctuations. The loss of particles to the wall is accounted for by using a logical sheath boundary, which is implemented in the context of a finite-volume method. The extended GENE code is benchmarked for the well-established one-dimensional parallel transport problem in the scrape-off layer during edge-localized modes. The parallel heat flux deposited onto the divertor target is compared with previous simulation results and shows good agreement.

43 PARTICLE ACCELERATORS↗

Computational study of instability and fill tube mitigation strategies for double shell implosions

Double shell capsules are an attractive alternative scheme for achieving robust alpha-heating at the National Ignition Facility due to their low convergence ratio and low predicted temperature for achieving volume ignition. Nevertheless, simulations suggest that double shell targets are more susceptible to the fill tube, used to fill the inner shell with liquid DT, than typical single-shell ignition capsule designs, due to the higher density gradient between the shell and the fill tube hole, a lower outer shell velocity, which prevents the implosion from catching up to the initial fill tube jet, and the absence of a rebounding shock through the foam to slow this jet. Double shells are also highly susceptible to the Rayleigh-Taylor instability at both interfaces with the high density inner shell. Combined, these effects are predicted by radiation-hydrodynamics simulations to reduce fuel confinement and temperature, resulting in reduced performance by a factor of ≈20–45, depending on design details, compared to idealized one-dimensional (1D) simulations. We discuss herein a mitigation strategy for both the interfacial instabilities and the fill tube that is predicted by simulations to decrease the yield degradation to a factor of ≈4. The mitigation strategy involves a modification of the capsule geometry as well as the use of a multishock pulse shape. The multishock pulse is required for the fill tube mitigation strategy and has the added benefit of stabilizing perturbations at the foam/pusher interface without decreasing 1D yield. In order to experimentally verify these predictions, we discuss the potential use of a hydrogrowth radiography platform that could be applied to test the proposed mitigation strategies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The redshift distribution of cosmological samples: a forward modeling approach

Determining the redshift distribution n ( z ) of galaxy samples is essential for several cosmological probes including weak lensing. For imaging surveys, this is usually done using photometric redshifts estimated on an object-by-object basis. We present a new approach for directly measuring the global n ( z ) of cosmological galaxy samples, including uncertainties, using forward modeling. Our method relies on image simulations produced using \textsc(UFig) (Ultra Fast Image Generator) and on ABC (Approximate Bayesian Computation) within the MCCL (Monte-Carlo Control Loops) framework. The galaxy population is modeled using parametric forms for the luminosity functions, spectral energy distributions, sizes and radial profiles of both blue and red galaxies. We apply exactly the same analysis to the real data and to the simulated images, which also include instrumental and observational effects. By adjusting the parameters of the simulations, we derive a set of acceptable models that are statistically consistent with the data. We then apply the same cuts to the simulations that were used to construct the target galaxy sample in the real data. The redshifts of the galaxies in the resulting simulated samples yield a set of n ( z ) distributions for the acceptable models. We demonstrate the method by determining n ( z ) for a cosmic shear like galaxy sample from the 4-band Subaru Suprime-Cam data in the COSMOS field. We also complement this imaging data with a spectroscopic calibration sample from the VVDS survey. We compare our resulting posterior n ( z ) distributions to the one derived from photometric redshifts estimated using 36 photometric bands in COSMOS and find good agreement. This offers good prospects for applying our approach to current and future large imaging surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

The recognition of extended targets - SAR images for level and hilly terrain

Radar image simulation techniques are used to determine the character of SAR images of area-extensive targets, for the cases of flat underlying terrain and of moderate relief, with a view to the severity of elevation change effects on the detection and recognition of boundaries and shapes. The experiment, which demonstrated these effects on shapes and boundaries, was performed in order to establish Seasat-A SAR performance. Attention is given to the geometry/propagation effects in range perspective imaging that must be known for information extraction.

Stiles, J. A.↗

In-Flight Edge Response Measurements for High Spatial Resolution Remote Sensing Systems

In-flight measurement of spatial resolution were conducted as part of the ASA Scientific Data Purchase (SDP) Validation and Verification (V&V) process. Characterization included remote sensing systems with ground sample distance (GSD) of 1 meter or less, such as the panchromatic imager on-board the ICONOS satellite and the airborne ADAR System 5500 multispectral instrument. Final image products were used to evaluate the effect of both the image acquisition system (e.g., optics, electronics, motion, jitter, atmosphere) and image post-processing (e.g., resampling, modulation trasfer function (MTF) compensator). Spatial resolution was characterized by full width at half maximum (FWHM) of an edge response-derived line spread function. This was found to be a more robust measure of spatial resolution than the value of NTF at Nyquist frequency The edge responses were analysed using the tilted-edge technique that ovecomes the spatial sampling limitations of the digital imaging systems. As an enhancement to existing algorithms, the slope of the edge response and the orientation of the edge target were determined by a single computational process. Adjacent black and white square panels, either painted on a flat surface or deployed as traps, formed the ground-based edge targets used in the tests. Orientation of the deployable tarps was optimized beforehand, based on simulations of the imaging system. Numerous edge target images were analyzed for each of the tested sensors. The effect of such factors as acquisition geometry, temporal variability, MTF compensation, and GSD on spatial resolution were investigated.

Blonski, Slawomir↗

Toward machine-learning-assisted PW-class high-repetition-rate experiments with solid targets

We present progress in utilizing a machine learning (ML) assisted optimization framework to study the trends in a parameter space defined by spectrally shaped, high-intensity, petawatt-class (8 J, 45 fs) laser pulses interacting with solid targets and give the first simulation-based overview of predicted trends. A neural network (NN) incorporating uncertainty quantification is trained to predict the number of hot electrons generated by the laser–target interaction as a function of pulse shaping parameters. The predictions of this NN serve as the basis function for a Bayesian optimization framework to navigate this space. For post-experimental evaluation, we compare two separate neural network (NN) models. One is based solely on data from experiments, and the other is trained only on ensemble particle-in-cell simulations. Reviewing the predicted and observed trends across the experiment-capable laser parameter search space, we find that both ML models predict a maximal increase in hot electron generation at a level of approximately 12%–18%; however, no statistically significant enhancement was observed in experiments. On direct comparison of the NN models, the average discrepancy is 8.5%, with a maximum of 30%. Since shot-to-shot fluctuations in experiments affect the observations, we evaluate the behavior of our optimization framework by performing virtual experiments that vary the number of repeated observations and the noise levels. Here, we discuss the implications of such a framework for future autonomous exploration platforms in high-repetition-rate experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of hard X-ray generation by hot electrons in a silver target

A semi-analytical model is developed for the generation of X-ray bremsstrahlung in metallic targets with the inclusion of hot electron recirculation (refluxing). The hard bremsstrahlung and characteristic X-ray yields are calculated in relation to the thickness of a silver target for an s-polarised subpicosecond laser pulse intensity of 2 × 10{sup 19} W cm{sup –2}. The effect of hot electron recirculation in thin foils is shown to significantly improve the K{sub α} radiation and bremsstrahlung yields in a photon energy of 10 – 100 keV. By contrast, the 0.1 – 1 MeV bremsstrahlung photon yield from thin foils with hot electron recirculation corresponds approximately to the highest photon yield from those targets in which recirculation is insignificant. We make a comparative analysis of the highest laser-to-X-ray energy conversion efficiencies obtained to date. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pion-Production Target for Mu2e-II: Design and Prototype

The higher beam intensity available for Mu2e-II will require a substantially different target design. This paper discusses our recent advances in conceptual R&D for a Mu2e-II target station. The design is based on energy deposition and radiation damage simulations as well as thermal and mechanical analyses to estimate the survivability of the system. We considered rotated targets, fixed granular targets and a novel conveyor target with tungsten or carbon spherical elements that are circulated through the beam path. The motion of the spheres can be generated either mechanically or both mechanically and by a He-gas flow. The simulations identified the conveyor target as the preferred approach, and that approach has been developed into a prototype. We describe this first prototype for the Mu2e-II target and report on its mechanical tests performed at Fermilab that indicate the feasibility of the design, discuss its challenges as well as suggest directions for further improvement.

Neuffer, David↗

Simulations of slow positron production using a low-energy electron accelerator

Monte Carlo simulations of slow positron production via energetic electron interaction with a solid target have been performed. The aim of the simulations was to determine the expected slow positron beam intensity from a low-energy, high-current electron accelerator. By simulating (a) the fast positron production from a tantalum electron-positron converter and (b) the positron depth deposition profile in a tungsten moderator, the slow positron production probability per incident electron was estimated. Normalizing the calculated result to the measured slow positron yield at the present AIST linear accelerator, the expected slow positron yield as a function of energy was determined. For an electron beam energy of 5 MeV (10 MeV) and current 240 {mu}A (30 {mu}A), production of a slow positron beam of intensity 5 x 10{sup 6} s{sup -1} is predicted. The simulation also calculates the average energy deposited in the converter per electron, allowing an estimate of the beam heating at a given electron energy and current. For low-energy, high-current operation the maximum obtainable positron beam intensity will be limited by this beam heating.

43 PARTICLE ACCELERATORS↗

SU-G-BRA-04: Simulation of Errors in Maximal Intensity Projection (MIP)-Based Lung Tumor Internal Target Volumes (ITV) Using Real-Time 2D MRI and Deformable Image Registration Based Lung Tumor Tracking

Purpose: To evaluate the effect of inter- and intra-fractional tumor motion on the error in four-dimensional computed tomography (4DCT) maximal intensity projection (MIP)–based lung tumor internal target volumes (ITV), using deformable image registration of real-time 2D-sagital cine-mode MRI acquired during lung SBRT treatments. Methods: Five lung tumor patients underwent free breathing SBRT treatment on the ViewRay, with dose prescribed to PTV (4DCT MIP-based ITV+3–6mm margin). Sagittal slice cine-MR images (3.5×3.5mm pixels) were acquired through the center of the tumor at 4 frames per second throughout the treatments (3–4 fractions of 21–32 minutes duration). Tumor GTVs were contoured on the first frame of the cine and tracked throughout the treatment using off-line optical-flow based deformable registration implemented on a GPU cluster. Pseudo-4DCT MIP-based ITVs were generated from MIPs of the deformed GTV contours limited to short segments of image data. All possible pseudo-4DCT MIP-based ITV volumes were generated with 1s resolution and compared to the ITV volume of the entire treatment course. Varying pseudo-4DCT durations from 10-50s were analyzed. Results: Tumors were covered in their entirety by PTV in the patients analysed here. However, pseudo-4DCT based ITV volumes were observed that were as small as 29% of the entire treatment-ITV, depending on breathing irregularity and the duration of pseudo-4DCT. With an increase in duration of pseudo-4DCT from 10–50s the minimum volume acquired from 95% of all pseudo-4DCTs increased from 62%–81% of the treatment ITV. Conclusion: A 4DCT MIP-based ITV offers a ‘snap-shot’ of breathing motion for the brief period of time the tumor is imaged on a specific day. Real time MRI over prolonged periods of time and over multiple treatment fractions shows that the accuracy of this snap-shot varies according to inter- and intra-fractional tumor motion. Further work is required to investigate the dosimetric effect of these results.

60 APPLIED LIFE SCIENCES↗

End-to-End Beam Simulations for the New Muon G-2 Experiment at Fermilab

The aim of the new muon g-2 experiment at Fermilab is to measure the anomalous magnetic moment of the muon with an unprecedented uncertainty of 140 ppb. A beam of positive muons required for the experiment is created by pion decay. Detailed studies of the beam dynamics and spin polarization of the muons are important to predict systematic uncertainties in the experiment. In this paper, we present the results of beam simulations and spin tracking from the pion production target to the muon storage ring. The end-to-end beam simulations are developed in Bmad and include the processes of particle decay, collimation (with accurate representation of all apertures) and spin tracking.

43 PARTICLE ACCELERATORS↗

Laboratory simulation of tunable diode laser remote measurement of atmospheric gases using topographic targets

In order to test the possibility that tunable diode laser (TDL) systems using topographic targets can be applied to the measurement of a variety of gases at concentrations and distances characteristic of industrial gas leaks, a single-ended TDL system was assembled for use with selected topographic targets to detect NO2 at atmospheric pressure and NO2 and NH3 at low pressures. In both cases, the intensity distribution of radiation backscattered from selected targets was found to be heavily weighted to a specular rather than a Lambertian distribution. A sensitivity of 5 ppm-m has been demonstrated for the case of NO2.

Webster, C. R.↗

Hubble space telescope pointing control system simulation

A time domain simulation of the Hubble Space Telescope (HST) pointing control system is described. The simulation was developed to aid in the evaluation of moving target pointing algorithms and to serve as an analysis tool. The HST pointing control system is briefly described, and the time domain simulation is discussed. A typical simulation result for moving target tracking is presented.

Strohbehn, K.↗

Fast Decompression Of Ultra-Thin Targets For High-Energy, High-Contrast Laser Pulses

In the laser-plasma interaction process, for ultra-high temporal contrast laser pulses, experimental measurements show that reducing the thickness of solid targets increases the laser-to-fast electrons energy conversion and the hot electron temperature. We have performed an experiment using the LULI 100 TW laser facility working in the chirped pulse amplification (CPA) mode at a wavelength {lambda}{sub 0} = 1.057 {mu}m, pulse duration 320 fs, laser spot size FWHM {approx}6 {mu}m and intensity {approx}1x10{sup 18} W/cm{sup 2} in which the laser pulses were temporal-contrast enhanced by the use of two plasma mirrors. Shots were performed on Si{sub 3}N{sub 4} aluminum coated targets of thickness 30 nm to 500 nm. Spectra of the laser-accelerated electrons were recorded with a spectrometer and are compared to PIC simulations performed with the CALDER code. The simulations allow an insight into the electron heating process during the laser-matter interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of the laser pulse irradiation point on a double layer target on the accelerated ion beam parameters

In proton acceleration by a laser pulse obliquely incident on a double layer target, it is shown by PIC simulations that the energy spread of the generated protons can be reduced by irradiating the laser pulse on to the off-center position of the target. This provides a way to control the proton energy spectrum. High energy protons are found to come from an area shifted from the initial target center towards the propagation direction of the laser pulse. We show that high energy protons with much smaller energy spread can be obtained by appropriately adjusting the size and position of the second proton layer.

43 PARTICLE ACCELERATORS↗

An Investigation into Solution Verification for CFD-DEM

This report presents the study of the convergence behavior of the computational fluid dynamicsdiscrete element method (CFD-DEM) method, specifically National Energy Technology Laboratory’s (NETL) open source MFiX code (MFiX-DEM) with a diffusion based particle-tocontinuum filtering scheme. In particular, this study focused on determining if the numerical method had a solution in the high-resolution limit where the grid size is smaller than the particle size. To address this uncertainty, fixed particle beds of two primary configurations were studied: i) fictitious beds where the particles are seeded with a random particle generator, and ii) instantaneous snapshots from a transient simulation of an experimentally relevant problem. Both problems considered a uniform inlet boundary and a pressure outflow. The CFD grid was refined from a few particle diameters down to 1/6 th of a particle diameter. The pressure drop between two vertical elevations, averaged across the bed cross-section was considered as the system response quantity of interest. A least-squares regression method was used to extrapolate the grid-dependent results to an approximate “grid-free” solution in the limit of infinite resolution. The results show that the diffusion based scheme does yield a converging solution. However, the convergence is more complicated than encountered in simpler, single-phase flow problems showing strong oscillations and, at times, oscillations superimposed on top of globally non-monotonic behavior. The challenging convergence behavior highlights the importance of using at least four grid resolutions in solution verification problems so that (over-determined) regression-based extrapolation methods may be applied to approximate the grid-free solution. The grid-free solution is very important in solution verification and VVUQ exercise in general as the difference between it and the reference solution largely determines the numerical uncertainty. By testing different randomized particle configurations of the same general problem (for the fictitious case) or different instances of freezing a transient simulation, the numerical uncertainties appeared to be on the same order of magnitude as ensemble or time averaging uncertainties. By testing different drag laws, almost all cases studied show that model form uncertainty in this one, very important closure relation was larger than the numerical uncertainty, at least with a reasonable CFD grid, roughly five particle diameters. In this study, the diffusion width (filtering length scale) was mostly set at a constant of six particle diameters. A few exploratory tests were performed to show that similar convergence behavior was observed for diffusion widths greater than approximately two particle diameters. However, this subject was not investigated in great detail because determining an appropriate filter size is really a validation question which must be determined by comparison to experimental or highly accurate numerical data. Future studies are being considered targeting solution verification of transient simulations as well as validation of the filter size with direct numerical simulation data.

97 MATHEMATICS AND COMPUTING↗

Modeling of direct-drive cylindrical implosion experiments with an Eulerian radiation-hydrodynamics code

Recent improvements to xRAGE, Los Alamos National Laboratory's Eulerian radiation-hydrodynamics code, have enabled the computation of laser-driven experiments relevant to inertial confinement fusion and high energy density physics. Here, previous directly driven cylindrical implosion experiments are modeled in order to benchmark xRAGE design simulations for future cylindrical implosion experiments, representing the first attempt to model such systems with an Eulerian code with adaptive mesh refinement. Simulations in 2D of transverse and axial cross-sections of the cylindrical target are performed, and the results are combined to form a 3D representation of the imploding cylinder. Synthetic radiographs are produced and analyzed from the simulation results, allowing for a direct comparison with experimentally measured quantities. The zeroth-order hydrodynamic trajectories of targets with no specified initial perturbation are well matched by the computations. Simulations of targets with a preimposed sinusoidal perturbation in the azimuthal direction show single-mode instability growth that is in agreement with the available data, but higher fidelity experimental measurements are required to enable more detailed comparisons. As a result, the mode growth observed in computations compares favorably with predictions of a linear theory for the ablative Rayleigh-Taylor instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling and verification of dynamic field ionization for laser-target interactions

Integrating field ionization models into kinetic plasma simulations is required for a variety of applications, especially when field strengths vary from low to high regimes, such as in laser-target interactions. The introduction of new physics models into kinetic codes requires a rigorous verification of their accuracy through well-defined verification problems. In this work, the field ionization model that has been included in the kinetic plasma code VPIC is presented, along with the detailed approach adopted for its integration. This model includes a comprehensive range of field ionization mechanisms: multiphoton ionization, tunneling ionization, and barrier suppression ionization. New verification problems employed to evaluate the ionization model's fidelity are outlined, and the simulation parameters that affect the accuracy of simulation results are explored. Additionally, this work addresses the impact of field ionization on computational performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗