Search NASA⌕ Search

SEARCH · Search NASA

Results for “WIND MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Evolution of the solar wind acceleration region during 1990-1994

The single-station measurements of interplanetary scintillation (IPS) at 2 and 8 GHz have been made at the Kashima Space Research Center of the Communications Research Laboratory in the period from 1990 to 1994. These IPS data are used to study the radial distribution of solar wind velocity and density fluctuations near the sun (i.e. 10-70 Rs), and the long-term variation in these properties. The IPS co-spectrum technique is applied here to estimate the solar wind velocity. Derived velocities show that the solar wind gains a speed significantly in the radial range from 10 to 30 Rs (solar radii). which is much farther than the source surface of the thermally driven solar wind model. From the scintillation index analysis. it is found that the radial fall of density fluctuations is well described by the power-law function. A series of IPS observations reveals that a pronounced change in velocity and turbulence level for this radial range occurs at the polar region of the sun during 1990-1994. That is, the high speed wind and the reduced turbulence region develop there as the solar activity declines. On the other hand, little long-term variation is observed for the solar wind acceleration region at a low latitude. From the comparison with He 1O83 nm observations. it is demonstrated that the change of the solar wind structure is closely linked with the evolution of the coronal hole on the solar surface.

Tokumaru, M.↗

Aeroelastic stability analyses of two counter rotating propfan designs for a cruise missile model

Aeroelastic stability analyses were performed to insure structural integrity of two counterrotating propfan blade designs for a NAVY/Air Force/NASA cruise missile model wind tunnel test. This analysis predicted if the propfan designs would be flutter free at the operating conditions of the wind tunnel test. Calculated stability results are presented for the two blade designs with rotational speed and Mach number as the parameters. A aeroelastic analysis code ASTROP2 (Aeroelastic Stability and Response of Propulsion Systems - 2 Dimensional Analysis), developed at LeRC, was used in this project. The aeroelastic analysis is a modal method and uses the combination of a finite element structural model and two dimensional steady and unsteady cascade aerodynamic models. This code was developed to analyze single rotation propfans but was modified and applied to counterrotating propfans for the present work. Modifications were made to transform the geometry and rotation of the aft rotor to the same reference frame as the forward rotor, to input a non-uniform inflow into the rotor being analyzed, and to automatically converge to the least stable aeroelastic mode.

Mahajan, Aparajit J.↗

CHARGE STATE EVOLUTION IN THE SOLAR WIND. II. PLASMA CHARGE STATE COMPOSITION IN THE INNER CORONA AND ACCELERATING FAST SOLAR WIND

In the present work, we calculate the evolution of the charge state distribution within the fast solar wind. We use the temperature, density, and velocity profiles predicted by Cranmer et al. to calculate the ionization history of the most important heavy elements in the solar corona and solar wind: C, N, O, Ne, Mg, Si, S, and Fe. The evolution of each charge state is calculated from the source region in the lower chromosphere to the final freeze-in point. We show that the solar wind velocity causes the plasma to experience significant departures from equilibrium at very low heights, well inside the field of view (within 0.6 R{sub sun} from the solar limb) of nearly all the available remote-sensing instrumentation, significantly affecting observed spectral line intensities. We also study the evolution of charge state ratios with distance from the source region, and the temperature they indicate if ionization equilibrium is assumed. We find that virtually every charge state from every element freezes in at a different height, so that the definition of freeze-in height is ambiguous. We also find that calculated freeze-in temperatures indicated by charge state ratios from in situ measurements have little relation to the local coronal temperature of the wind source region, and stop evolving much earlier than their correspondent charge state ratio. We discuss the implication of our results on plasma diagnostics of coronal holes from spectroscopic measurements as well as on theoretical solar wind models relying on coronal temperatures.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical solutions of Navier-Stokes equations for the structure of a trailing vortex

The structure and decay of a trailing vortex were analyzed during the numerical solutions of the full Navier-Stokes equations. Unsteady forms of the governing equations were recast in terms of circulation, vorticity, and stream function as dependent variables, and a second upwind finite difference scheme was used to integrate them with prescribed initial and boundary conditions. The boundary conditions at the outer edge and at the outflow section of the trailing vortex were considered. Different models of the flow were postulated, and solutions were obtained describing the development of the flow as integration proceeds in time. A parametric study was undertaken with a view to understanding the various phenomena that may possibly occur in the trailing vortex. Using the Hoffman and Joubert law of circulation at the inflow section, the results of this investigation were compared with experimental data for a Convair 990 wind model and a rectangular wing. With an exponentially decaying law of circulation at the inflow section and an adverse pressure gradient at the outer edge of the trailing vortex, solutions depict vortex bursting through the sudden expansion of the core and/or through the stagnation and consequent reversal of the flow on the axis. It was found that this bursting takes place at lower values of the swirl ratio as the Reynolds number increases.

Jain, A. C.↗

[Fe II] emissions associated with the young interacting binary UY Aurigae

We present high-resolution 1.06-1.28 μm spectra toward the interacting binary UY Aur obtained with GEMINI/NIFS and the adaptive optics system Altair. We have detected [Fe II] λ1.257 μm and He I λ1.083 μm lines from both UY Aur A (the primary source) and UY Aur B (the secondary). In [Fe II] UY Aur A drives fast and widely opening outflows with an opening angle of ∼90° along a position angle of ∼40°, while UY Aur B is associated with a redshifted knot. The blueshifted and redshifted emissions show a complicated structure between the primary and secondary. The radial velocities of the [Fe II] emission features are similar for UY Aur A and B: ∼ –100 km s{sup –1} for the blueshifted emission and ∼ +130 km s{sup –1} for the redshifted component. The He I line profile observed toward UY Aur A comprises a central emission feature with deep absorptions at both blueshifted and redshifted velocities. These absorption features may be explained by stellar wind models. The He I line profile of UY Aur B shows only an emission feature.

79 ASTRONOMY AND ASTROPHYSICS↗

Mapping and Modeling the Extended Winds of the Massive Interacting Binary, Eta Carinae

The combination HST/STIS high spatial and moderate spectral resolutions have revealed the massive interacting wind structure of Eta Carinae by forbidden lines of singly and doubly ionized elements. Throughout the 5.54-year period, lines of Fe++, Ne++, Ar++, S++ and N+ reveal the interacting wind structures, near critical electron densities of 10(exp 5) to 3 x 10(exp 7)cu cm, photoionized by the hot secondary, Eta Car B, Lines of Fe+ and Ni+ trace the denser (>10(exp 7)cu cm. less-ionized (< 8 eV) primary wind of Eta Car A as it wraps around the interacting binary stars. For 5 years of the 5.54 year period, the FUV radiation from Eta Car B escapes the orbital region, ionizing the boundaries of the expanding wind structures. But for three to six months, Eta Car B plunges into the primary wind approaching to within 1 to 2 AU, leading to cutoff of FUV and X-ray fluxes. The interacting wind structure, resolved out to 0.8", drops io ionization and then rebuilds as Eta Car B emerges from the primary wind envelope. Solid Particle Hydrodynamical(SPH) models have been developed extending out to 2000 AU and adapted to include FUV radiation effects of the winds. In turn, synthetic spectroimages of selected forbidden lines have been constructed and compared to the spectroimages recorded by the HST/STIS throughout 1998.0 to 2004.3, extending across the 1998 and 2003.5 minima. By this method, we show that the orbital axis of the binary system must bc within 15 degrees of the Homunculus axis of symmetry and that periastron occurs with Eta Car B passing on the far side of Eta Car B. This result ties the current binary orbit with the bipolar ejection with intervening skirt and leads to implications that the binary system influenced the mass ejection of the l840s and the lesser ejection of the 1890s.

Gull, Ted↗

Wind variability in the Large Magellanic Cloud B(e) supergiant HD 34664

We present optical linear spectropolarimetry of the B(e) supergiant HD 34664. The polarization and position angle display significant spectral features which correspond to the H-alpha and H-beta emission lines. We use the line polarizations to separate the interstellar foreground polarization from the intrinsic polarization of HD 34664. The intrinsic polarization is consistent with electron scattering in a circumstellar disk seen at high inclination and provides further and independent evidence for the two-component wind model of the B(e) supergiants. We compare the polarization and spectrum of HD 34664 to observations published in the literature. In our data the continuum polarization is by a factor of two larger and the H-alpha line-to-continuum ratio is by a factor of at least four increased over previous observations. Since both the polarization and the line intensity are measures of the electron density in the stellar wind, we suggest that the observed variations can be attributed to a rise in the stellar mass-loss rate.

Schulte-Ladbeck, R. E.↗

ROTATING BULLETS FROM A VARIABLE PROTOSTAR

We present Submillimeter Array (SMA) CO (2–1) observations toward the protostellar jet driven by SVS 13 A, a variable protostar in the NGC 1333 star-forming region. The SMA CO (2–1) images show an extremely high-velocity jet composed of a series of molecular “bullets.” Based on the SMA CO observations, we discover clear and large systematic velocity gradients, perpendicular to the jet axis, in the blueshifted and redshifted bullets. After discussing several alternative interpretations, such as twin-jets, jet precession, warped disk, and internal helical shock, we suggest that the systematic velocity gradients observed in the bullets result from the rotation of the SVS 13 A jet. From the SMA CO images, the measured rotation velocities are 11.7–13.7 km s{sup −1} for the blueshifted bullet and 4.7 ± 0.5 km s{sup −1} for the redshifted bullet. The estimated specific angular momenta of the two bullets are comparable to those of dense cores, about 10 times larger than those of protostellar envelopes, and about 20 times larger than those of circumstellar disks. If the velocity gradients are due to the rotation of the SVS 13 A jet, the significant amount of specific angular momenta of the bullets indicates that the rotation of jets/outflows is a key mechanism to resolve the so-called “angular momentum problem” in the field of star formation. The kinematics of the bullets suggests that the jet launching footprint on the disk has a radius of ∼7.2–7.7 au, which appears to support the extended disk-wind model. We note that further observations are needed to comprehensively understand the kinematics of the SVS 13 A jet, in order to confirm the rotation nature of the bullets.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling Innovations Advance Wind Energy Industry

In 1981, Glenn Research Center scientist Dr. Larry Viterna developed a model that predicted certain elements of wind turbine performance with far greater accuracy than previous methods. The model was met with derision from others in the wind energy industry, but years later, Viterna discovered it had become the most widely used method of its kind, enabling significant wind energy technologies-like the fixed pitch turbines produced by manufacturers like Aerostar Inc. of Westport, Massachusetts-that are providing sustainable, climate friendly energy sources today.

Source record↗

Data-Driven Machine Learning for Wind Plant Flow Modeling

In this study, we introduce a data-driven machine learning framework for improving the accuracy of wind plant flow models by learning turbulence model corrections based on data from higher-fidelity simulations. First, a high-dimensional PDE-constrained optimization problem is solved using gradient-based optimization with adjoints to determine optimal eddy viscosity fields that improve the agreement of a medium-fidelity Reynolds-Averaged Navier Stokes (RANS) model with large eddy simulations (LES). A supervised learning problem is then constructed to find general, predictive representations of the optimal turbulence closure. A machine learning technique using Gaussian process regression is trained to predict the eddy viscosity field based on local RANS flow field information like velocities, pressures, and their gradients. The Gaussian process is trained on LES simulations of a single turbine and implemented in a wind plant simulation with 36 turbines. We show improvement over the baseline RANS model with the machine learning correction, and demonstrate the ability to provide accurate confidence levels for the corrections that enable future uncertainty quantification studies.

17 WIND ENERGY↗

ON THE BREAK IN THE FERMI-LARGE AREA TELESCOPE SPECTRUM OF 3C 454.3

Fermi Gamma-ray Space Telescope observations of the flat spectrum radio quasar 3C 454.3 show a spectral-index change {Delta}{Gamma} {approx_equal} 1.2 {+-} 0.3 at break energy E {sub br} {approx} 2.4 {+-} 0.3 GeV. Such a sharp break is inconsistent with a cooling electron distribution and is poorly fit with a synchrotron self-Compton model. We show that a combination of two components, namely, the Compton-scattered disk and broad-line region (BLR) radiations, explains this spectral break and gives a good fit to the quasi-simultaneous radio, optical/UV, X-ray, and {gamma}-ray spectral energy distribution observed in 2008 August. A sharp break can be produced independent of the emitting region's distance from the central black hole if the BLR has a gradient in density {proportional_to}R {sup -2}, consistent with a wind model for the BLR.

79 ASTRONOMY AND ASTROPHYSICS↗

Lanthanides or Dust in Kilonovae: Lessons Learned from GW170817

The unprecedented optical and near-infrared lightcurves of the first electromagnetic counterpart to a gravitational-wave source, GW170817, a binary neutron star merger, exhibited a strong evolution from blue to near-infrared (a so-called “kilonova” or “macronova”). The emerging near-infrared component is widely attributed to the formation of r-process elements that provide the opacity to shift the blue light into the near-infrared. An alternative scenario is that the light from the blue component gets extinguished by dust formed by the kilonova and subsequently is re-emitted at near-infrared wavelengths. We test here this hypothesis using the lightcurves of AT 2017gfo, the kilonova accompanying GW170817. We find that of the order of 10{sup −5} M{sub ⊙} of carbon is required to reproduce the optical/near-infrared lightcurves as the kilonova fades. This putative dust cools from ∼2000 K at ∼4 days after the event to ∼1500 K over the course of the following week, thus requiring dust with a high condensation temperature, such as carbon. We contrast this with the nucleosynthetic yields predicted by a range of kilonova wind models. These suggest that at most 10{sup −9} M{sub ⊙} of carbon is formed. Moreover, the decay in the inferred dust temperature is slower than that expected in kilonova models. We therefore conclude that in current models of the blue component of the kilonova, the near-infrared component in the kilonova accompanying GW170817 is unlikely to be due to dust.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulated photoevaporative mass loss from hot jupiters in 3D

Ionizing stellar photons heat the upper regions of planetary atmospheres, driving atmospheric mass loss. Gas escaping from several hot, hydrogen-rich planets has been detected using UV and X-ray transmission spectroscopy. Because these planets are tidally locked, and thus asymmetrically irradiated, escaping gas is unlikely to be spherically symmetric. In this paper, we focus on the effects of asymmetric heating on local outflow structure. We use the Athena code for hydrodynamics to produce 3D simulations of hot Jupiter mass loss that jointly model wind launching and stellar heating via photoionization. Our fiducial planet is an inflated, hot Jupiter with radius R{sub p}=2.14R{sub Jup} and mass M{sub p}=0.53M{sub Jup}. We irradiate the initially neutral, atomic hydrogen atmosphere with 13.6 eV photons and compute the outflow’s ionization structure. There are clear asymmetries in the atmospheric outflow, including a neutral shadow on the planet’s nightside. Given an incident ionizing UV flux comparable to that of the Sun, we find a steady-state mass loss rate of ∼2×10{sup 10} g s{sup −1}. The total mass loss rate and the outflow substructure along the substellar ray show good agreement with earlier 1D models, for two different fluxes. Our 3D data cube can be used to generate the outflow’s extinction spectrum during transit. As a proof of concept, we find absorption of stellar Lyα at Doppler-shifted velocities of up to ±50 km s{sup −1}. Our work provides a starting point for further 3D models that can be used to predict observable signatures of hot Jupiter mass loss.

79 ASTRONOMY AND ASTROPHYSICS↗

CO STRUCTURE OF THE 21 {mu}m SOURCE IRAS 22272+5435: A SIGN OF A JET LAUNCH?

We report the results of radio interferometric observations of the 21 {mu}m source IRAS 22272+5435 in the CO J = 2-1 line. 21 {mu}m sources are carbon-rich objects in the post-asymptotic-giant-branch phase of evolution, which show an unidentified emission feature at 21 {mu}m. Since 21 {mu}m sources usually also have circumstellar molecular envelopes, the mapping of CO emission from the envelope will be useful in tracing the nebular structure. From observations made with the Combined Array for Research in Millimeter-wave Astronomy, we find that a torus and spherical wind model can explain only part of the CO structure. An additional axisymmetric region created by the interaction between an invisible jet and ambient material is suggested.

79 ASTRONOMY AND ASTROPHYSICS↗

A parcel-level evaluation of distributed wind opportunity in the contiguous United States

This study examines the potential for distributed wind (DW) energy across the contiguous United States, leveraging advancements in the National Renewable Energy Laboratory's distributed wind model, dWind. The novel modeling approach described here utilizes a high-resolution dataset and analyzes over 150 million parcels, a significant improvement from prior methods that extrapolated results from a smaller random sample. This achievement is enabled through key model performance improvements, such as transitioning to multiprocessing, which reduces runtime by 97 %. This optimized, high-resolution approach allows the inspection of technology deployment potential and impact on a variety of scales tailored to individual properties and regions. The results here align with prior work showing substantial opportunity for energy generation using DW technologies. Key findings reveal a substantial increase from prior results in estimated technical and economic potential for DW. Metrics tuned to highlight economic potential also show increased incentives supporting rural adoption. Results are spatially aggregated for usability and published via the U.S. Department of Energy Wind Data Portal and a custom scenario visualization platform, aiding policymakers, industry, and property owners in assessing DW viability across various scenarios and spatial scales.

17 WIND ENERGY↗

The Grism Lens-Amplified Survey from Space (GLASS). X. Sub-kiloparsec Resolution Gas-phase Metallicity Maps at Cosmic Noon behind the Hubble Frontier Fields Cluster MACS1149.6+2223

We combine deep Hubble Space Telescope grism spectroscopy with a new Bayesian method to derive maps of gas-phase metallicity for 10 star-forming galaxies at high redshift (1.2≲z≲2.3). Exploiting lensing magnification by the foreground cluster MACS1149.6+2223, we reach sub-kiloparsec spatial resolution and push the limit of stellar mass associated with such high-z spatially resolved measurements below 10{sup 8} M{sub ⊙} for the first time. Our maps exhibit diverse morphologies, indicative of various effects such as efficient radial mixing from tidal torques, rapid accretion of low-metallicity gas, and other physical processes that can affect the gas and metallicity distributions in individual galaxies. Based upon an exhaustive sample of all existing sub-kiloparesec resolution metallicity gradient measurements at high z, we find that predictions given by analytical chemical evolution models assuming a relatively extended star-formation profile in the early disk-formation phase can explain the majority of observed metallicity gradients, without involving galactic feedback or radial outflows. We observe a tentative correlation between stellar mass and metallicity gradients, consistent with the “downsizing” galaxy formation picture that more massive galaxies are more evolved into a later phase of disk growth, where they experience more coherent mass assembly at all radii and thus show shallower metallicity gradients. In addition to the spatially resolved analysis, we compile a sample of homogeneously cross-calibrated integrated metallicity measurements spanning three orders of magnitude in stellar mass at z ∼ 1.8. We use this sample to study the mass–metallicity relation (MZR) and find that the slope of the observed MZR can rule out the momentum-driven wind model at a 3σ confidence level.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessment of Model Hub Height Wind Speed Performance Using DOE Lidar Buoy Data

As the offshore wind industry continues to gain momentum both in the U.S. and globally, reanalysis products remain essential tools for the lifecycle of a wind farm. From project siting and production estimates to determining construction and maintenance windows, reanalysis products play an important role. These regional and global long-term models also serve as inputs to higher resolution models. With such wide-ranging impacts on the offshore wind industry, the need for validation of reanalysis products is strong, particularly at typical turbine hub heights. Pacific Northwest National Laboratory (PNNL) operates two AXYS WindSentinelTM buoys for the U.S. Department of Energy (DOE) in order to collect meteorological and oceanographic data, including hub height wind speed, in areas of interest for offshore wind development. This work uses DOE buoy observations off the coasts of New Jersey and Virginia to evaluate the performance of Modern Era Retrospective Analysis for Research and Applications-2 (MERRA-2), the North American Regional Reanalysis (NARR), the European Center for Medium-Range Weather Forecasts (ECMWF) Reanalysis 5th generation (ERA5), and the National Oceanic and Atmospheric Administration (NOAA) assimilation system Rapid Refresh (RAP). Biases and degrees of correspondence are determined for each reanalysis product in order to provide insights on the performance and uncertainty for long-term wind resource characterization. With the baseline metrics determined, this work proceeds with an investigation into the sources of large deviations between the modeled and observed hub height wind speeds during the East Coast lidar buoy deployments. Consistent sources of reanalysis model error include stably stratified flow conditions, high wind shear, flow parallel to the coastline, and tropical and winter storms. For the near shore New Jersey location, offshore winds (i.e. blowing from land to water) tend to be associated with model overestimation of observed hub height wind speed, while winds parallel to the coastline are correlated with model underestimation of wind speed. Similarly, near the Virginia buoy, during southerly winds (parallel to the coastline) models underestimate the observed wind speed due to coastal upwelling. Reanalysis model wind speeds underestimate the hub height winds with increasing stable atmospheric stratification. Reanalysis model biases are seen when the observed wind speeds approach or exceed typical turbine cut-out speeds (around 20 m s-1). Large model errors during winter and tropical storm events, high wind speed events, and ramp events are often the result of wind speed timing and magnitude offsets. Overall, ERA5 provides the most successful representation of observed offshore hub height wind speeds at the U.S. East Coast buoy locations and is therefore best suited as an input boundary condition for model case studies. ERA5 performs well for a variety of atmospheric phenomena, including storms and sea breezes, however RAP, the next most successful reanalysis model, performs best in capturing the frequency of ramp events.

17 WIND ENERGY↗