Search NASA⌕ Search

SEARCH · Search NASA

Results for “anionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Anion exchange membrane test protocol validation

This study presents the validation of protocols for measuring ion exchange capacity (IEC) and alkaline stability of anion exchange membranes (AEMs) for low-temperature water electrolysis. While protocols are often tested within individual laboratories, their results across multiple laboratories with varying equipment, environmental conditions, and personnel qualification remain unverified. The validation involved Los Alamos National Laboratory (LANL), National Renewable Energy Laboratory (NREL), and University of Oregon (UO) using the same commercially available AEM to assess reproducibility and reliability of the protocols under diverse conditions. For the IEC protocol, results across laboratories were consistent within ±10% of the NMR-determined reference value. The alkaline stability protocol could pose greater challenges due to factors such as variations in sample collection timing, preservation methods, and analytical techniques, but consistent test results for percentage IEC loss were demonstrated across institutions. These results highlight the reliability and applicability of the protocols, emphasizing the importance of validation to ensure consistency in diverse research environments.

08 HYDROGEN↗

Anion-exchange membrane water electrolysis: insights from round-robin testing

As research and industrial interest in anion-exchange membrane water electrolysis (AEMWE) grows, there is an increasing need for reliable baselines and cross-lab validation of results. The wide variety of material sets and operating conditions under consideration for AEMWE has thus far limited efforts for standardization. In this study, round-robin testing was conducted in deionized water and KOH-based supporting electrolyte by 5 institutions from academia, national laboratories, and industry to provide baseline performance data and identify sources of cross-lab variability. Baseline membrane electrode assemblies were fabricated with commercial catalysts, membranes, and transport layers using standard techniques and tested using reagent-grade electrolytes, aiming for accessibility rather than state-of-the-art performance. From all tests, the average voltage at 1 A/cm 2 was 2.72 ± 0.17 V and 1.87 ± 0.03 V in deionized water and 0.1 M KOH, respectively. The maximum in-house and cross-lab variations at this current density were 118 mV and 476 mV in water and 60 and 88 mV in 0.1 M KOH. The KOH purity, station contamination, and temperature control were identified as possible factors affecting performance between labs, with in-house specific variation attributed to sample-to-sample differences in fabrication, cell assembly, and station contamination. This work provides a commercial baseline for the field and highlights the need for improved standardization and reproducibility in AEMWE research.

08 HYDROGEN↗

Stabilizing Li-rich NMC Materials by Using Precursor Salts with Acetate and Nitrate Anions for Li-ion Batteries

Lithium-rich layered oxide cathode materials of Li 1.2 Mn 0.5100 Ni 0.2175 Co 0.0725 O 2 have been synthesized using metal salts with acetate and nitrate anions as precursors in glycerol solvent. The effects of the precursor metal salts on particle size, morphology, cationic ordering, and ultimately, the electrode performance of the cathode powders have been studied. It was demonstrated that the use of cornstarch as a gelling agent with nitrate-based metal salts results in a reduction of particle size, leading to higher surface area and initial discharge capacity. However, the cornstarch gelling effect was minimized when acetate salts were used. As observed in the Fourier-transform infrared spectroscopy analysis, cornstarch can react with acetates to form acetyl groups during the synthesis, effectively preventing the cornstarch gel from capping the particles, thus leading to larger particles. A tradeoff was found when nitrate and acetate salts were mixed in the synthesis. It was shown that the new cathode powder has the best cationic ordering and capacity retention, promising a much stable Li-rich cathode material for lithium-ion batteries.

25 ENERGY STORAGE↗

Nanostructured ZnO-Based Electrochemical Sensor with Anionic Surfactant for the Electroanalysis of Trimethoprim

In this research, detection of trimethoprim (TMP) was carried out using a nanostructured zinc oxide nanoparticle-modified carbon paste electrode (ZnO/CPE) with an anionic surfactant and sodium dodecyl sulphate (SDS) with the help of voltametric techniques. The electrochemical nature of TMP was studied in 0.2 M pH 3.0 phosphate-buffer solution (PBS). The developed electrode displayed the highest peak current compared to nascent CPE. Effects of variation in different parameters, such as pH, immersion time, scan rate, and concentration, were investigated. The electrode process of TMP was irreversible and diffusion controlled with two electrons transferred. The effective concentration range (8.0 × 10 -7 M–1.0 × 10 -5 M) of TMP was obtained by varying the concentration with a lower limit of detection obtained to be 2.58 × 10 -8 M. In addition, this approach was effectively employed in the detection of TMP in pharmaceutical dosages and samples of urine with the excellent recovery data, suggesting the potency of the developed electrode in clinical and pharmaceutical sample analysis.

36 MATERIALS SCIENCE↗

Transport and Co-Transport of Carboxylate Ions and Ethanol in Anion Exchange Membranes

Understanding multi-component transport behavior through hydrated dense membranes is of interest for numerous applications. For the particular case of photoelectrochemical CO 2 reduction cells, it is important to understand the multi-component transport behavior of CO 2 electrochemical reduction products including mobile formate, acetate and ethanol in the ion exchange membranes as one role of the membrane in these devices is to minimize the permeation of these products. Anion exchange membranes (AEM) have been employed in these and other electrochemical devices as they act to facilitate the transport of common electrolytes (i.e., bicarbonates). However, as they act to facilitate the transport of carboxylates as well, thereby reducing the overall performance, the design of new AEMs is necessary to improve device performance through the selective transport of the desired ion(s) or electrolyte(s). Here, we investigate the transport behavior of formate and acetate and their co-transport with ethanol in two types of AEMs: (1) a crosslinked AEM prepared by free-radical copolymerization of a monomer with a quaternary ammonium (QA) group and a crosslinker, and (2) Selemion® AMVN. We observe a decrease in diffusivities to carboxylates in co-diffusion. We attribute this behavior to charge screening by the co-diffusing alcohol, which reduces the electrostatic attraction between QAs and carboxylates.

36 MATERIALS SCIENCE↗

Efficient Synthesis of High-Performance Anion Exchange Membranes by Applying Clickable Tetrakis(dialkylamino)phosphonium Cations

Tetrakis(dialkylamino)phosphonium (TKDAAP) compounds exhibit extraordinary base resistance, a prerequisite feature for high-performance anion exchange membranes (AEMs). It is, however, challenging to synthesize a TKDAAP compound with reactive functionality that can be used to link the cation to a polymer backbone. In this study, two TKDAAP compounds with alkyne functionality were synthesized and incorporated into an azide-modified SBS triblock copolymer backbone via Cu(I)-catalyzed alkyne–azide cycloaddition (CuAAC) “click” chemistry. The properties of the resulting AEMs were characterized. It was found that (1) the triazole linker between the cation and the polymer backbone was stable under alkaline conditions; (2) varying the substituents of TKDAAP compounds could dramatically alter the stability; and (3) increasing the hydrophilicity of the AEM was an efficient way to enhance its ionic conductivity. Using clickable TKDAAP compounds makes it easy to combine various cations into polymer backbones with adjustable cation content, thus potentially leading to an efficient way to screen a wide variety of polyelectrolyte structures to identify the most promising candidates for high-performance AEMs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Alkaline Anion Exchange Membranes through Crosslinking: A Review of Synthetic Strategies and Property Relationships

Alkaline anion exchange membranes (AAEMs) are an enabling component for next-generation electrochemical devices, including alkaline fuel cells, water and CO2 electrolyzers, and flow batteries. While commercial systems, notably fuel cells, have traditionally relied on proton-exchange membranes, hydroxide-ion conducting AAEMs hold promise as a method to reduce cost-per-device by enabling the use of non-platinum group electrodes and cell components. AAEMs have undergone significant material development over the past two decades; however, challenges remain in the areas of durability, water management, high temperature performance, and selectivity. In this review, we survey crosslinking as a tool capable of tuning AAEM properties. While crosslinking implementations vary, they generally result in reduced water uptake and increased transport selectivity and alkaline stability. We survey synthetic methodologies for incorporating crosslinks during AAEM fabrication and highlight necessary precautions for each approach.

08 HYDROGEN↗

Structural and Mechanistic Analysis through Electronic Spectra: Aqueous Hyponitrite Radical (N(2)O(2)(-)) and Nitrosyl Hyponitrite Anion (N(3)O(3)(-))

Aqueous hyponitrite radical (N{sub 2}O{sub 2}{sup -}) and nitrosyl hyponitrite anion (N{sub 3}O{sub 3}{sup -}) are important intermediates in the reductive chemistry of NO. The structures and absorption spectra of various hydrated isomers of these compounds were investigated in this work using high-level quantum mechanical calculations combined with the explicit classical description of the aqueous environment. For N{sub 2}O{sub 2}{sup -}, comparison of the calculated spectra and energetics with the experimental data reveals that (1) upon the one-electron oxidation of trans-hyponitrite (ON{double_bond}NO{sup 2-}), the trans configuration of the resulting ON{double_bond}NO{sup -} radical is preserved; (2) although cis- and trans-ON{double_bond}NO{sup -} are energetically nearly equivalent, the barrier for the trans-cis isomerization is prohibitively high because of the partial double character of the NN bond; (3) the calculations confirm that the UV spectrum of ONNO{sup -} was misinterpreted in the earlier pulse radiolysis work, and its more recent revision has been justified. For the N{sub 3}O{sub 3}{sup -} ion, the symmetric isomer the dominant observable species, and the asymmetric isomer contributes insignificantly to the experimental spectrum. Coherent analysis of the calculated and experimental data suggests a reinterpretation of the N{sub 2}O{sub 2}{sup -} + NO reaction mechanism according to which the reaction evenly bifurcates to yield both the symmetric and asymmetric isomers of N{sub 3}O{sub 3}{sup -}. While the latter isomer rapidly decomposes to the final NO{sub 2}{sup -} + N{sub 2}O products, the former isomer is stable toward this decomposition, but its formation is reversible with the homolysis equilibrium constant K{sub hom} = 2.2 x 10{sup -7} M. Collectively, these results demonstrate that advanced theoretical modeling can be of significant benefit in structural and mechanistic analysis on the basis of the electronic spectra of aqueous transients.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of H-2 Aggregation onto a Doubly Charged Anion in a Temperature-Controlled Ion Trap

Hydrogen is the second most difficult gas to be condensed due to its weak intermolecular interactions. Here we report observation of H2 aggregation onto a doubly charged anion, –O2C(CH2)12CO2– (DC2–). Weakly-bound DC2–(H2)n clusters were formed in a temperature-controlled ion trap and studied using photoelectron spectroscopy. The onset of clustering was observed at 30 K, whereas extensive condensation was observed at 12 K with n up to 12. Photoelectron spectra were obtained for DC2–(H2)n (n = 0–6) at 193 and 266 nm. The spectra of DC2–(H2)n were observed to be identical to that of the bare DC2– dianion except a slight blue shift, indicating the weak interactions between H2 and the parent dianion. The blue shift on average amounts to ~34 meV (3.3 kJ/mol) per H2, which represents the lower limit of the H2 binding energy to DC2–.

08 HYDROGEN↗

Solvent Effects on the Coexistence of Localized and Delocalized 4,4′-Dinitrotolane Radical Anion by Resonance Raman Spectroscopy

The resonance Raman spectrum of the simple alkyne bridge in 4,4{prime}-dinitrotolane radical anion shows two distinct bands, providing proof of the solvent-dependent coexistence of charge-localized and -delocalized species. The Raman spectra of normal modes primarily involving the charge-bearing ?PhNO{sub 2} units also support the coexistence of two solvent-dependent electronic species. The temperature dependence of the spectra of the bridging unit shows an inverse relationship between the solvent reorganization energy ({lambda}{sub s}) and the temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porphyrin Aerogel Catalysts for Oxygen Reduction Reaction in Anion-Exchange Membrane Fuel Cells

Platinum group metal (PGM)-free catalysts for oxygen reduction reaction have shown high oxygen reduction reaction activity in alkaline media. In order to further increase the power density of anion-exchange membrane fuel cells (AEMFCs), PGM-free catalysts need to have a high site density to reach high current densities. In this work, synthesis, characterization, and utilization of heat-treated iron porphyrin aerogels are reported as cathode catalysts in AEMFCs. The heat treatment effect is thoroughly studied and characterized using several techniques, and the best performing aerogel is studied in AEMFC, showing excellent performance, reaching a peak power density of 580 mW cm –2 and a limiting current density of as high as 2.0 A cm –2 , which can be considered the state-of-the-art for PGM-free based AEMFCs.

25 ENERGY STORAGE↗

Divalent Anionic Doping in Perovskite Solar Cells for Enhanced Chemical Stability

The chemical stabilities of hybrid perovskite materials demand further improvement toward long-term and large-scale photovoltaic applications. Herein, the enhanced chemical stability of CH 3 NH 3 PbI 3 is reported by doping the divalent anion Se 2- in the form of PbSe in precursor solutions to enhance the hydrogen-bonding-like interactions between the organic cations and the inorganic framework. As a result, in 100% humidity at 40 degrees C, the 10% w/w PbSe-doped CH 3 NH 3 PbI 3 films exhibited >140-fold stability improvement over pristine CH 3 NH 3 PbI 3 films. As the PbSe-doped CH 3 NH 3 PbI 3 films maintained the perovskite structure, a top efficiency of 10.4% with 70% retention after 700 h aging in ambient air is achieved with an unencapsulated 10% w/w PbSe:MAPbI 3 -based cell. As a bonus, the incorporated Se 2- also effectively suppresses iodine diffusion, leading to enhanced chemical stability of the silver electrodes.

14 SOLAR ENERGY↗

Anharmonic Cation–Anion Coupling Dynamics Assisted Lithium‐Ion Diffusion in Sulfide Solid Electrolytes

Abstract Sulfide‐based lithium superionic conductors often show higher Li‐ion conductivity than other types of electrolyte materials. This work unveils a unique Li‐ion conductive behavior in these materials through the perspective of anharmonic coupling assisted Li‐ion diffusion. Li hopping events can happen simultaneously with various types of lattice dynamics, while only a statistically important synchronization of motions may indicate coupling. This method enables a direct evaluation of the coupling strength between these motions, which more fundamentally decides if a specific type of lattice motion is really anharmonically coupled to the Li hopping event and whether the coupling can facilitate the Li diffusion. By a new ab initio computational approach, this work unveils a unique phenomenon in prototype sulfide electrolytes in comparison with typical halide ones, that Li‐ion conduction can be boosted by the anharmonic coupling of low‐frequency Li phonon modes with high‐frequency anion stretching or flexing phonon modes, rather than the low‐frequency rotational modes. The coupling pushes Li ions toward the diffusion channels for reduced diffusion barriers. The result from the lower temperature range (≈0–300 K) of simulation can also be more relevant to the application of solid‐state batteries.

Chemistry↗

Revisiting the Impact of Anion Selection on Sulfur Redox Reaction Kinetics for High Sulfur Loading Lithium–Sulfur Batteries

Lithium bis(trifluoromethane)sulfonimide (LiTFSI) is widely used in lithium–sulfur (Li–S) battery electrolytes due to its stability with lithium polysulfides (LiPSs) and moderate compatibility with lithium metal anodes. However, LiTFSI presents environmental concerns due to its association with per- and polyfluoroalkyl substances (PFAS), which are environmentally persistent and potentially toxic, raises sustainability concerns. This research also reveals that LiTFSI limits sulfur redox reactions (SRRs), making it less effective than other lithium salts. Additionally, some salts previously considered incompatible with Li-S systems due to their reactivity with LiPSs are demonstrated to perform effectively. For the first time, a protective, porous cathode electrolyte interphase (CEI) formed in situ through reactions between salt anions and LiPS is reported. The cells delivered a high specific capacity of 1230.8 mAh g −1 at 0.05 C with a sulfur loading of ≈6 mg cm −2 , limited lithium anode, maintaining a capacity retention of 76.2% after 100 cycles at 0.1 C. Under harsh conditions, such as high sulfur loading, lean electrolyte conditions (3 µL mg −1 ), and in anode-free cells, the cells continued to deliver outstanding capacity. This work provides valuable guidelines for understanding and selecting lithium salts to advance electrolyte design for Li–S batteries.

high loading batteries↗

Tri‐Metallic Catalyst for Oxygen Evolution Reaction Enables Continuous Operation of Anion Exchange Membrane Electrolyzer at 1A cm −2 for Hundreds of Hours

Abstract Although numerous efforts are made to synthesize active electrocatalysts for green hydrogen production; catalyst stability, and facile synthesis to scale up the production are still challenging. Herein, the production of novel non‐PGM catalysts for the oxygen reduction reaction (OER) in an alkaline aqueous medium is reported, which is based on the synthesis of a trimetallic metal–organic framework (MOF) precursors. Fine‐tuning of the composition of the metal centers (Ni, Co, and Fe) shows a great effect on OER activity after the MOF undergoes dynamic chemical and structural transformations under OER conditions. In situ characterization reveals the origin of OER activity enhancement as metals’ oxidation state increases, inducing compressive mechanical strain on metal centers, enhancing the electronic conductivity through the formation of oxygen vacancies, and stronger metal–oxygen covalency. Catalysts are used in membrane electrode assembly (MEA) setup within an industrial full‐cell anion exchange membrane electrolyzer (AEMEC), showing a stable performance for 550 h without noticeable decay at 750 and 1000 mA cm −2 industrial level current densities.

Chemistry↗

Regulating the Third Metal to Design and Engineer Multilayered NiFeM (M: Co, Mn, and Cu) Nanofoam Anode Catalysts for Anion-Exchange Membrane Water Electrolyzers

In this study, alkaline anion-exchange membrane water electrolyzers (AEMWEs) for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant platinum group metal (PGM)-free catalysts. Herein, the third metal is incorporated into NiFe-based catalysts to regulate their electronic structures and morphologies, aiming to achieve sufficient oxygen evolution reaction (OER) activity and performance in AEMWEs. The ternary NiFeM (M: Cu, Co, or Mn) catalysts are featured with multiple layered structures and nanofoam network morphologies, consisting of highly OER-active amorphous Ni-rich oxide shells and electrically conductive metallic alloy cores. The physical and electronic perturbations to the NiFe induced by a third element lead to a fine-tuning of the redox ability of the metal sites at the reaction centers, which breaks the scaling relationship between OH* and O* intermediates at the reaction centers. Thus, the unique structural configuration and electronic regulation simultaneously benefit catalytic activity and performance improvements. These NiFeM nanofoam catalysts demonstrated promising anode performance in actual AEMWEs, comparable to the IrO 2 reference, especially at high current densities. Notably, using various electrolytes (e.g., KOH solution or pure water) for AEMWEs exhibited a different performance trend among studied NiFeM catalysts, likely due to dynamic changes of catalysts under various OER environments.

25 ENERGY STORAGE↗

Nitrogen‐doped Carbon–CoO x Nanohybrids: A Precious Metal Free Cathode that Exceeds 1.0 W cm −2 Peak Power and 100 h Life in Anion‐Exchange Membrane Fuel Cells

Abstract Efficient and durable nonprecious metal electrocatalysts for the oxygen reduction (ORR) are highly desirable for several electrochemical devices, including anion exchange membrane fuel cells (AEMFCs). Here, a 2D planar electrocatalyst with CoO x embedded in nitrogen‐doped graphitic carbon (N‐C‐CoO x ) was created through the direct pyrolysis of a metal–organic complex with a NaCl template. The N‐C‐CoO x catalyst showed high ORR activity, indicated by excellent half‐wave (0.84 V vs. RHE) and onset (1.01 V vs. RHE) potentials. This high intrinsic activity was also observed in operating AEMFCs where the kinetic current was 100 mA cm −2 at 0.85 V. When paired with a radiation‐grafted ETFE powder ionomer, the N‐C‐CoO x AEMFC cathode was able to achieve extremely high peak power density (1.05 W cm −2 ) and mass transport limited current (3 A cm −2 ) for a precious metal free electrode. The N‐C‐CoO x cathode also showed good stability over 100 hours of operation with a voltage decay of only 15 % at 600 mA cm −2 under H 2 /air (CO 2 ‐free) reacting gas feeds. The N‐C‐CoO x cathode catalyst was also paired with a very low loading PtRu/C anode catalyst, to create AEMFCs with a total PGM loading of only 0.10 mg Pt‐Ru cm −2 capable of achieving 7.4 W mg −1 PGM as well as supporting a current of 0.7 A cm −2 at 0.6 V with H 2 /air (CO 2 free)—creating a cell that was able to meet the 2019 U.S. Department of Energy initial performance target of 0.6 V at 0.6 A cm −2 under H 2 /air with a PGM loading <0.125 mg cm −2 with AEMFCs for the first time.

Peng, Xiong↗

Direct Insertion Polymerization of Ionic Monomers: Rapid Production of Anion Exchange Membranes

Abstract The limited number of methods to directly polymerize ionic monomers currently hinders rapid diversification and production of ionic polymeric materials, namely anion exchange membranes (AEMs) which are essential components in emerging alkaline fuel cell and electrolyzer technologies. Herein, we report a direct coordination‐insertion polymerization of cationic monomers, providing the first direct synthesis of aliphatic polymers with high ion incorporations and allowing facile access to a broad range of materials. We demonstrate the utility of this method by rapidly generating a library of solution processable ionic polymers for use as AEMs. We investigate these materials to study the influence of cation identity on hydroxide conductivity and stability. We found that AEMs with piperidinium cations exhibited the highest performance, with high alkaline stability, hydroxide conductivity of 87 mS cm −1 at 80 °C, and a peak power density of 730 mW cm −2 when integrated into a fuel cell device.

Hsu, Jesse H.↗