Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

On the acceleration of charged particles at relativistic shock fronts

The diffusive acceleration of highly relativistic particles at a shock is reconsidered. Using the same physical assumptions as Blandford and Ostriker (1978), but dropping the restriction to nonrelativistic shock velocities, the authors find approximate solutions of the particle kinetic equation by generalizing the diffusion approximation to higher order terms in the anisotropy of the particle distribution. The general solution of the transport equation on either side of the shock is constructed, which involves the solution of an eigenvalue problem. By matching the two solutions at the shock, the spectral index of the resulting power law is found by taking into account a sufficiently large number of eigenfunctions. Low-order truncation corresponds to the standard diffusion approximation and to a somewhat more general method described by Peacock (1981). In addition to the energy spectrum, the method yields the angular distribution of the particles and its spatial dependence.

Kirk, J. G.↗
NASA NTRS1990

Distribution of galaxies in the Southern Galactic Cap

Observations in the southern galactic hemisphere in the declination range between -17.5 and 2.5 degrees are combined with other available observation. The data set is used to study the spatial distribution of galaxies of a contiguous area of 3.13 sr of the Southern Galactic Cap. An approximately homogeneous magnitude-limited sample of galaxies in the Southern Galactic Cap is constructed from different catalogs. The resulting large scale structure is similar to that of previous surveys in which bright galaxies are distributed on surfaces which intersect at sharp corners and nearly surround voids that are almost empty of galaxies.

Pellegrini, P. S.↗
DOE OSTI2022

Functional soft materials and methods of making and using thereof

Disclosed are functional materials for use in additive manufacturing (AM). The functional material can comprise an elastomeric composition (e.g., a silicone composite) for use in, for example, direct ink writing. The elastomeric composition can include and elastomeric resin, and a magnetic nanorod filler dispersed within the elastomeric resin. Nanorod characteristics (e.g., length, diameter, aspect ratio) can be selected to create 3D-printed constructs with desired mechanical properties along different axes. Furthermore, since nickel nanorods are ferromagnetic, the spatial distribution and orientation of nanorods within the continuous phase can be controlled with an external magnetic field. This level of control over the nanostructure of the material system offers another degree of freedom in the design of functional parts and components with anisotropic properties. Magnetic fields can be used to remotely sense compression of the constructs, or alternatively, control the stiffness of these materials.

Berkland, Cory↗
DOE OSTI2024

Functional soft materials and methods of making and using thereof

Disclosed are functional materials for use in additive manufacturing (AM). The functional material can comprise an elastomeric composition (e.g., a silicone composite) for use in, for example, direct ink writing. The elastomeric composition can include an elastomeric resin, and a magnetic nanorod filler dispersed within the elastomeric resin. Nanorod characteristics (e.g., length, diameter, aspect ratio) can be selected to create 3D-printed constructs with desired mechanical properties along different axes. Furthermore, since nickel nanorods are ferromagnetic, the spatial distribution and orientation of nanorods within the continuous phase can be controlled with an external magnetic field. This level of control over the nanostructure of the material system offers another degree of freedom in the design of functional parts and components with anisotropic properties. Magnetic fields can be used to remotely sense compression of the constructs, or alternatively, control the stiffness of these materials.

Berkland, Cory↗
DOE OSTI2014

Quantifying (dis)agreement between direct detection experiments in a halo-independent way

We propose an improved method to study recent and near-future dark matter direct detection experiments with small numbers of observed events. Our method determines in a quantitative and halo-independent way whether the experiments point towards a consistent dark matter signal and identifies the best-fit dark matter parameters. To achieve true halo independence, we apply a recently developed method based on finding the velocity distribution that best describes a given set of data. For a quantitative global analysis we construct a likelihood function suitable for small numbers of events, which allows us to determine the best-fit particle physics properties of dark matter considering all experiments simultaneously. Based on this likelihood function we propose a new test statistic that quantifies how well the proposed model fits the data and how large the tension between different direct detection experiments is. We perform Monte Carlo simulations in order to determine the probability distribution function of this test statistic and to calculate the p-value for both the dark matter hypothesis and the background-only hypothesis.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2019

Developing an Aircraft-Based Angular Distribution Model of Solar Reflection from Wildfire Smoke to Aid Satellite-Based Radiative Flux Estimation

This study examines the angular distribution of scattered solar radiation associated with wildfire smoke aerosols observed over boreal forests in Canada during the ARCTAS (Arctic Research of the Composition of the Troposphere from Aircraft and Satellites) campaign. First, it estimates smoke radiative parameters (550 nm optical depth of 3.9 and single scattering albedo of 0.90) using quasi-simultaneous multiangular and multispectral airborne measurements by the Cloud Absorption Radiometer (CAR). Next, the paper estimates the broadband top-of-atmosphere radiances that a satellite instrument such as the Clouds and the Earth’s Radiant Energy System (CERES) could have observed, given the narrowband CAR measurements made from an aircraft circling about a kilometer above the smoke layer. This estimation includes both an atmospheric correction that accounts for the atmosphere above the aircraft and a narrowband-to-broadband conversion. The angular distribution of estimated radiances is found to be substantially different than the angular model used in the operational data processing of CERES observations over the same area. This is because the CERES model is a monthly average model that was constructed using observations taken under smoke-free conditions. Finally, a sensitivity analysis shows that the estimated angular distribution remains accurate for a fairly wide range of smoke and underlying surface parameters. Overall, results from this work suggest that airborne CAR measurements can bring some substantial improvements in the accuracy of satellite-based radiative flux estimates.

Varnai, Tamas↗
NASA NTRS1989

Nonlinear and distributed parameter models of the mini-mast truss

Large spacecraft such as Space Station Freedom employ large trusses in their construction. The structural dynamics of such trusses often exhibit nonlinear behavior and little damping which can impact significantly the performance of control systems. The Mini-MAST truss was constructed to research such structural dynamics and control systems. The Mini-MAST truss is an object of study for the guest investigator program as part of NASA's controls-structures interaction program. The Mini-MAST truss is deployable and about 65 ft long. Although the bending characteristics of the Mini-MAST truss are essentially linear, the angular deflection under torsional loading has exhibited significant hysteresis and nonlinear stiffness. It is the purpose to develop nonlinear and distributed parameter models of the truss and to compare the model dynamics with actual measurements. Distributed parameter models have the advantage of requiring fewer model parameters. A tangent function is used to describe the nonlinear stiffness in torsion, partly because of the convenience of its easily expressed inverse. Hysteretic slip elements are introduced and extended to a continuum to account for the observed hysteresis in torsion. The contribution of slipping to the structural damping is analyzed and found to be strongly dependent on the applied loads. Because of the many factors which affect the damping and stiffness in a truss, it is risky to assume linearity.

Taylor, Lawrence W., Jr.↗
NASA NTRS1991

Maintaining consistency in distributed systems

In systems designed as assemblies of independently developed components, concurrent access to data or data structures normally arises within individual programs, and is controlled using mutual exclusion constructs, such as semaphores and monitors. Where data is persistent and/or sets of operation are related to one another, transactions or linearizability may be more appropriate. Systems that incorporate cooperative styles of distributed execution often replicate or distribute data within groups of components. In these cases, group oriented consistency properties must be maintained, and tools based on the virtual synchrony execution model greatly simplify the task confronting an application developer. All three styles of distributed computing are likely to be seen in future systems - often, within the same application. This leads us to propose an integrated approach that permits applications that use virtual synchrony with concurrent objects that respect a linearizability constraint, and vice versa. Transactional subsystems are treated as a special case of linearizability.

Birman, Kenneth P.↗
DOE OSTI2022

Quark and gluon helicity evolution at small x: revised and updated

We revisit the problem of small Bjorken-x evolution of the gluon and flavor-singlet quark helicity distributions in the shock wave (s-channel) formalism. Earlier works on the subject in the same framework resulted in an evolution equation for the gluon field-strength F 12 and quark “axial current” $\overline{\psi}\gamma$ + γ 5 ψ operators (sandwiched between the appropriate light-cone Wilson lines) in the double-logarithmic approximation (summing powers of α s ln 2 (1/x) with α s the strong coupling constant). In this work, we observe that an important mixing of the above operators with another gluon operator, ${}_D{}^{\leftarrow i} {}_D{}^{i}$, also sandwiched between the light-cone Wilson lines (with the repeated transverse index i = 1, 2 summed over), was missing in the previous works. This operator has the physical meaning of the sub-eikonal (covariant) phase: its contribution to helicity evolution is shown to be proportional to another sub-eikonal operator, ${}_D{}^{i} {}_D{}^{\leftarrow i}$, which is related to the Jaffe-Manohar polarized gluon distribution. In this work we include this new operator into small-x helicity evolution, and construct novel evolution equations mixing all three operators (${}_D{}^{i} {}_D{}^{\leftarrow i}$, F 12 , and $\overline{\psi}\gamma$ + γ 5 ψ), generalizing the results of . We also construct closed double-logarithmic evolution equations in the large-N c and large-N c &N f limits, with N c and N f the numbers of quark colors and flavors, respectively. Solving the large-N c equations numerically we obtain the following small-x asymptotics of the quark and gluon helicity distributions ΔΣ and ΔG, along with the g 1 structure function, $$ \Delta \Sigma \left(x,{Q}^2\right)\sim \Delta G\left(x,{Q}^2\right)\sim {g}_1\left(x,{Q}^2\right)\sim {\left(\frac{1}{x}\right)}^{3.66\sqrt{\frac{\alpha_s{N}_c}{2\pi }}} $$ in complete agreement with the earlier work by Bartels, Ermolaev and Ryskin.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

A phase-field approach to model multi-axial and microstructure dependent fracture in nuclear grade graphite

The fracture behavior of nuclear grade graphites is strongly influenced by underlying microstructural features such as the character of filler particles, and the distribution of pores and voids. These microstructural features influence the crack nucleation and propagation behavior, resulting in quasi-brittle fracture with a tortuous crack path and significant scatter in measured bulk strength. This paper uses a phase-field method to model the microstructural and multi-axial fracture in H-451, a historic variant of nuclear graphite that provides the basis for an idealized study on a legacy grade. The representative volume elements are constructed from randomly located pores with random size obtained from experimentally determined log-normal distribution. The representative volume elements are then subjected to simulated multi-axial loading, and a reasonable agreement of the resulting fracture stress with experiments is obtained. Finally, quasi-brittle stress-strain evolution with a tortuous crack path is also observed from the simulations and is consistent with experimental results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

SU-E-I-07: An Improved Technique for Scatter Correction in PET

Purpose: In positron emission tomography (PET), the single scatter simulation (SSS) algorithm is widely used for scatter estimation in clinical scans. However, bias usually occurs at the essential steps of scaling the computed SSS distribution to real scatter amounts by employing the scatter-only projection tail. The bias can be amplified when the scatter-only projection tail is too small, resulting in incorrect scatter correction. To this end, we propose a novel scatter calibration technique to accurately estimate the amount of scatter using pre-determined scatter fraction (SF) function instead of the employment of scatter-only tail information. Methods: As the SF depends on the radioactivity distribution and the attenuating material of the patient, an accurate theoretical relation cannot be devised. Instead, we constructed an empirical transformation function between SFs and average attenuation coefficients based on a serious of phantom studies with different sizes and materials. From the average attenuation coefficient, the predicted SFs were calculated using empirical transformation function. Hence, real scatter amount can be obtained by scaling the SSS distribution with the predicted SFs. The simulation was conducted using the SimSET. The Siemens Biograph™ 6 PET scanner was modeled in this study. The Software for Tomographic Image Reconstruction (STIR) was employed to estimate the scatter and reconstruct images. The EEC phantom was adopted to evaluate the performance of our proposed technique. Results: The scatter-corrected image of our method demonstrated improved image contrast over that of SSS. For our technique and SSS of the reconstructed images, the normalized standard deviation were 0.053 and 0.182, respectively; the root mean squared errors were 11.852 and 13.767, respectively. Conclusion: We have proposed an alternative method to calibrate SSS (C-SSS) to the absolute scatter amounts using SF. This method can avoid the bias caused by the insufficient tail information and therefore improve the accuracy of scatter estimation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1999

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near-Earth asteroid (NEA) population is thought to contain approximately 1500 objects as large as a kilometer, approximately 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗
NASA NTRS1999

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near Earth asteroid (NEA) population is thought to contain approx. 1500 objects as large as a kilometer, approx. 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗
DOE OSTI2023

Know Your Space: Inlier and Outlier Construction for Calibrating Medical OOD Detectors

This software offers methods and functions for training calibrated out-of-distribution detectors for medical image classification tasks. It includes functionalities for training, synthesizing data augmentations, calibration, and out-of-distribution detection. Developed using PyTorch, this software is compatible with standard neural network architectures used for imaging data. Additionally, it provides capabilities to compute evaluation metrics for assessing the performance and quality of the detectors.

Narayanaswamy, VivekSivaraman↗
DOE OSTI2021

Towards robust autonomous impedance spectroscopy analysis: A calibrated hierarchical Bayesian approach for electrochemical impedance spectroscopy (EIS) inversion

Distribution-based analyses, such as the distribution of relaxation times (DRT) and the distribution of diffusion times (DDT), present model-free alternatives to equivalent circuit modeling for analysis of electrochemical impedance spectroscopy (EIS) data. However, reconstructing such distributions from noisy impedance data is an ill-posed problem that must be solved with specialized inversion algorithms, requiring careful control and tuning. Furthermore, most inversion algorithms developed to date can only solve problems of limited complexity. Herein, we present a new hierarchical Bayesian method for EIS inversion, leveraging efficient algorithms for optimization and Hamiltonian Monte Carlo (HMC) sampling to solve models of arbitrary complexity. We overcome the challenge of ad-hoc parameter tuning by encoding intrinsic characteristics of the DRT and DDT into flexible prior distributions and “pre-calibrating” the model to simulated data. This approach is versatile, highly robust to noise, and provides quantitative estimates of both the error structure of the data and the uncertainty in the recovered distributions. The model is validated with simulated data to demonstrate accurate recovery of the DRT and the DDT. The method also shows promise for simultaneous recovery of multiple distributions, raising the intriguing possibility of semi-autonomous EIS analysis and ad-hoc model construction. Finally, the practical utility of the method is illustrated with experimental data. Throughout, we draw comparisons to several recently published EIS inversion methodologies.

36 MATERIALS SCIENCE↗
NASA NTRS2007

Automatic Command Sequence Generation

Automatic Sequence Generator (Autogen) Version 3.0 software automatically generates command sequences for the Mars Reconnaissance Orbiter (MRO) and several other JPL spacecraft operated by the multi-mission support team. Autogen uses standard JPL sequencing tools like APGEN, ASP, SEQGEN, and the DOM database to automate the generation of uplink command products, Spacecraft Command Message Format (SCMF) files, and the corresponding ground command products, DSN Keywords Files (DKF). Autogen supports all the major multi-mission mission phases including the cruise, aerobraking, mapping/science, and relay mission phases. Autogen is a Perl script, which functions within the mission operations UNIX environment. It consists of two parts: a set of model files and the autogen Perl script. Autogen encodes the behaviors of the system into a model and encodes algorithms for context sensitive customizations of the modeled behaviors. The model includes knowledge of different mission phases and how the resultant command products must differ for these phases. The executable software portion of Autogen, automates the setup and use of APGEN for constructing a spacecraft activity sequence file (SASF). The setup includes file retrieval through the DOM (Distributed Object Manager), an object database used to store project files. This step retrieves all the needed input files for generating the command products. Depending on the mission phase, Autogen also uses the ASP (Automated Sequence Processor) and SEQGEN to generate the command product sent to the spacecraft. Autogen also provides the means for customizing sequences through the use of configuration files. By automating the majority of the sequencing generation process, Autogen eliminates many sequence generation errors commonly introduced by manually constructing spacecraft command sequences. Through the layering of commands into the sequence by a series of scheduling algorithms, users are able to rapidly and reliably construct the desired uplink command products. With the aid of Autogen, sequences may be produced in a matter of hours instead of weeks, with a significant reduction in the number of people on the sequence team. As a result, the uplink product generation process is significantly streamlined and mission risk is significantly reduced. Autogen is used for operations of MRO, Mars Global Surveyor (MGS), Mars Exploration Rover (MER), Mars Odyssey, and will be used for operations of Phoenix. Autogen Version 3.0 is the operational version of Autogen including the MRO adaptation for the cruise mission phase, and was also used for development of the aerobraking and mapping mission phases for MRO.

Fisher, Forest↗
DOE OSTI2021

The Intrinsic Shapes of Low Surface Brightness Galaxies (LSBGs): A Discriminant of LSBG Galaxy Formation Mechanisms

We use the low surface brightness galaxy (LSBG) samples created from the Hyper Suprime-Cam Subaru Strategic Program (781 galaxies), the Dark Energy Survey (20977 galaxies), and the Legacy Survey (selected via H ι detection in the Arecibo Legacy Fast ALFA Survey, 188 galaxies) to infer the intrinsic shape distribution of the LSBG population. To take into account the effect of the surface brightness cuts employed when constructing LSBG samples, we simultaneously model both the projected ellipticity and the apparent surface brightness in our shape inference. We find that the LSBG samples are well characterized by oblate spheroids, with no significant difference between red and blue LSBGs. This inferred shape distribution is in good agreement with similar inferences made for ultra-diffuse cluster galaxy samples, indicating that environment does not play a key role in determining the intrinsic shape of LSBGs. In this study, we also find some evidence that LSBGs are more thickened than similarly massive high surface brightness dwarfs. We compare our results to intrinsic shape measures from contemporary cosmological simulations, and find that the observed LSBG intrinsic shapes place considerable constraints on the formation path of such galaxies. In particular, LSBG production via the migration of star formation to large radii produces intrinsic shapes in good agreement with our observational findings.

79 ASTRONOMY AND ASTROPHYSICS↗