Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

An astrophysics data program investigation of cluster evolution

A preliminary status report is given on studies using the Einstein x ray observations of distant clusters of galaxies that are also candidates for gravitational lenses. The studies will determine the location and surface brightness distribution of the x ray emission from clusters associated with selected gravitational lenses. The x ray emission comes from hot gas that traces out the total gravitational potential in the cluster, so its distribution is approximately the same as the mass distribution causing gravitational lensing. Core radii and x ray virial masses can be computed for several of the brighter Einstein sources, and preliminary results are presented on A2218. Preliminary status is also reported on a study of the optical data from 0024+16. A provisional value of 1800 to 2200 km/s for the equivalent velocity dispersion is obtained. The ultimate objective is to extract the mass of the gravitational lens, and perhaps more detailed information on the distribution of matter as warranted. A survey of the Einstein archive shows that the clusters A520, A1704, 3C295, A2397, A1722, SC5029-247, A3186 and A370 have enough x ray counts observed to warrant more detailed optical observations of arcs for comparison. Mass estimates for these clusters can therefore be obtained from three independent sources: the length scale (core radius) that characterizes the density dropoff of the x ray emitting hot gas away from its center, the velocity dispersion of the galaxies moving in the cluster potential, and gravitational bending of light by the total cluster mass. This study will allow the comparison of these three techniques and ultimately improve the knowledge of cluster masses.

Kellogg, Edwin M.↗

Studying the spatial distribution of interstellar dust

The spacial distribution of interstellar dust reflects both interstellar dynamics and the processes which form and destroy dust in the interstellar medium (ISM). The IRAS survey, because of its high sensitivity to thermal emission from dust in the IR, provides new approaches to determining the spatial distribution of dust. The initial results are reported of an attempt to use the IRAS data to probe the spatial distribution of dust - by searching for thermal emission from dust in the vicinity of bright stars. These results show that this technique (which relies on finding IR emission associated with randomly selected stars) can ultimately be used to study the distribution of dust in the ISM. The density of the cloud producing the IR emission may be derived by assuming that the dust is at its projected distance from the star and that the heating is due to the star's (known) radiation field. The heating radiation is folded into a grain model, and the number of emitting grains adjusted to reproduce the observed energy distribution. It is noted that this technique is capable in principle of detecting dust densities much lower than those typical of the cirrus clouds.

Walker, Helen J.↗

THE SLOAN DIGITAL SKY SURVEY QUASAR LENS SEARCH. VI. CONSTRAINTS ON DARK ENERGY AND THE EVOLUTION OF MASSIVE GALAXIES

We present a statistical analysis of the final lens sample from the Sloan Digital Sky Survey Quasar Lens Search (SQLS). The number distribution of a complete subsample of 19 lensed quasars selected from 50,836 source quasars is compared with theoretical expectations, with particular attention given to the selection function. Assuming that the velocity function of galaxies does not evolve with redshift, the SQLS sample constrains the cosmological constant to {Omega}{sub {Lambda}} = 0.79{sup +0.06}{sub -0.07}(stat.){sup +0.06}{sub -0.06}(syst.) for a flat universe. The dark energy equation of state is found to be consistent with w = -1 when the SQLS is combined with constraints from baryon acoustic oscillation (BAO) measurements or results from the Wilkinson Microwave Anisotropy Probe (WMAP). We also obtain simultaneous constraints on cosmological parameters and redshift evolution of the galaxy velocity function, finding no evidence for redshift evolution at z {approx}< 1 in any combinations of constraints. For instance, number density evolution quantified as {nu}{sub n} {identical_to} dln {phi}{sub *}/dln (1 + z) and the velocity dispersion evolution {nu}{sub {sigma}} {identical_to} dln {sigma}{sub *}/dln (1 + z) are constrained to {nu}{sub n} = 1.06{sup +1.36}{sub -1.39}(stat.){sup +0.33}{sub -0.64}(syst.) and {nu}{sub {sigma}} = -0.05{sup +0.19}{sub -0.16}(stat.){sup +0.03}{sub -0.03}(syst.), respectively, when the SQLS result is combined with BAO and WMAP for flat models with a cosmological constant. We find that a significant amount of dark energy is preferred even after fully marginalizing over the galaxy evolution parameters. Thus, the statistics of lensed quasars robustly confirm the accelerated cosmic expansion.

79 ASTRONOMY AND ASTROPHYSICS↗

Signatures of Selection for Resistance/Tolerance to Perkinsus olseni in Grooved Carpet Shell Clam ( Ruditapes decussatus ) Using a Population Genomics Approach

ABSTRACT The grooved carpet shell clam ( Ruditapes decussatus ) is a bivalve of high commercial value distributed throughout the European coast. Its production has suffered a decline caused by different factors, especially by the parasite Perkinsus olsenii . Improving production of R . decussatus requires genomic resources to ascertain the genetic factors underlying resistance/tolerance to P. olseni i . In this study, the first reference genome of R . decussatus was assembled through long‐ and short‐read sequencing (1677 contigs; 1.386 Mb) and further scaffolded at chromosome level with Hi‐C (19 superscaffolds; 95.4% of assembly). Repetitive elements were identified (32%) and masked for annotation of 38,276 coding‐ and 13,056 non‐coding genes. This genome was used as a reference to develop a 2bRAD‐Seq 13,438 SNP panel for a genomic screening on six shellfish beds distributed across the Atlantic Ocean and Mediterranean Sea. Beds were selected by perkinsosis prevalence and the infection level was individually evaluated in all the samples. Genetic diversity was significantly higher in the Mediterranean than in the Atlantic region. The main genetic breakage was detected between those regions (F ST = 0.224), being the Mediterranean more heterogeneous than the Atlantic. Several loci under divergent selection (394 outliers; 261 genomic windows) were detected across shellfish beds. Samples were also inspected to detect signals of selection for resistance/tolerance to P. olseni i by using infection‐level and population‐genomics approaches, and 90 common divergent outliers for resistance/tolerance to perkinsosis were identified and used for gene mining. Candidate genes and markers identified provide invaluable information for controlling perkinsosis and for improving production of the grooved carpet shell clam.

Sambade, Inés M. [Department of Zoology, Genetics ↗

Bayesian Adaptive Polynomial Chaos Expansions

Polynomial chaos expansions (PCEs) are widely used for uncertainty quantification (UQ) tasks, particularly in the applied mathematics community. However, PCE has received comparatively less attention in the statistics literature, and fully Bayesian formulations remain rare—especially with implementations in R. Motivated by the success of adaptive Bayesian machine learning models such as BART, BASS and BPPR, we develop a new fully Bayesian adaptive PCE method with an efficient and accessible R implementation: khaos. Our approach includes a novel proposal distribution that enables data-driven interaction selection and supports a modified g-prior tailored to PCE structure. Through simulation studies and real-world UQ applications, we demonstrate that the Bayesian adaptive PCE provides competitive performance for surrogate modeling, global sensitivity analysis and ordinal regression tasks.

97 MATHEMATICS AND COMPUTING↗

A method and tool to determine the colorimetric and photobiological properties of light transmitted through glass and other optical materials

Here we describe a framework and provides a computational tool to characterize the color quality and biological potential of light that is transmitted through glass and other optical materials. The IES TM-30 framework and Excel computation tool were adapted to evaluate color quality, with measures from CIE S 026, UL 24480, and the WELL Building Standard v2 added to evaluate biological potential. The user selects a pre-transmittance spectral power distribution (SPD), such as for a CIE D-Series Illuminant, Planckian radiation, electric lamp, or measurement of daylight at a building site. The tool allows a user to populate a database with spectral data for glazing or other optical materials, comprising spectral transmission and the spectral reflectance of both sides. The user creates a unit with one, two, or three panes of glazing or other optical materials, and the tool calculates the composite spectral transmittance accounting for reflections between materials. The tool computes the transmitted SPD, then determines colorimetric and photobiological outputs using the transmitted SPD as the test source. Glass, window, and skylight manufacturers can employ the tool to optimize glazing spectral transmission to achieve intentional colorimetric and photobiological performance with transmitted light. Electric lighting manufacturers, designers, and researchers can use the tool to evaluate the impact of glazing units and other optical materials on the color quality and biological potential of transmitted light.

36 MATERIALS SCIENCE↗

Computed Tomography Number Changes Observed During Computed Tomography–Guided Radiation Therapy for Head and Neck Cancer

Purpose: To investigate CT number (CTN) changes in gross tumor volume (GTV) and organ at risk (OAR) according to daily diagnostic-quality CT acquired during CT-guided intensity modulated radiation therapy for head and neck cancer (HNC) patients. Methods and Materials: Computed tomography scans acquired using a CT-on-rails during daily CT-guided intensity modulated radiation therapy for 15 patients with stage II to IVa squamous cell carcinoma of the head and neck were analyzed. The GTV, parotid glands, spinal cord, and nonspecified tissue were generated on each selected daily CT. The changes in CTN distributions and the mean and mode values were collected. Pearson analysis was used to assess the correlation between the CTN change, organ volume reduction, and delivered radiation dose. Results: Volume and CTN changes for GTV and parotid glands can be observed during radiation therapy delivery for HNC. The mean (±SD) CTNs in GTV and ipsi- and contralateral parotid glands were reduced by 6 ± 10, 8 ± 7, and 11 ± 10 Hounsfield units, respectively, for all patients studied. The mean CTN changes in both spinal cord and nonspecified tissue were almost invisible (<2 Hounsfield units). For 2 patients studied, the absolute mean CTN changes in GTV and parotid glands were strongly correlated with the dose delivered (P<.001 and P<.05, respectively). For the correlation between CTN reductions and delivered isodose bins for parotid glands, the Pearson coefficient varied from −0.98 (P<.001) in regions with low-dose bins to 0.96 (P<.001) in high-dose bins and were patient specific. Conclusions: The CTN can be reduced in tumor and parotid glands during the course of radiation therapy for HNC. There was a fair correlation between CTN reduction and radiation doses for a subset of patients, whereas the correlation between CTN reductions and volume reductions in GTV and parotid glands were weak. More studies are needed to understand the mechanism for the radiation-induced CTN changes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis and structure of a new layered oxyfluoride Sr{sub 2}ScO{sub 3}F with photocatalytic property

Highlights: • A new oxyfluoride compound Sr{sub 2}ScO{sub 3}F was prepared by a solid state route. • The structure of this compound was determined by GSAS program based on XRD data. • The photocatalytic property was investigated under UV irradiation. - Abstract: A new Ruddlesden–Popper type scandium oxyfluoride, Sr{sub 2}ScO{sub 3}F, was synthesized by a conventional solid state reaction route. The detailed structure of Sr{sub 2}ScO{sub 3}F was investigated using X-ray diffraction (XRD) and selected area electron diffraction (SAED). The disorder distribution pattern of fluorine anions was determined by the {sup 19}F nuclear magnetic resonance (NMR) spectrum. The compound crystallizes in a K{sub 2}NiF{sub 4}-type tetragonal structure (space group I4/mmm) with O/F anions disordered over the apical sites of the perovskite-type Sc(O,F){sub 6} octahedron layers interleaved with strontium cations. Ultraviolet–visible (UV–vis) diffuse reflection spectrum of the prepared Sr{sub 2}ScO{sub 3}F indicates that it has an absorption in the UV–vis region. The photocatalytic activity of Sr{sub 2}ScO{sub 3}F was further investigated, showing an effective photodegradation of Rhodamine-B (RB) within 2 h under UV light irradiation.

36 MATERIALS SCIENCE↗

In-situ single-grain peak profile measurements on Ti-7Al during tensile deformation.

High-energy three-dimensional X-ray diffraction with medium and high reciprocal space resolution was applied to study in situ tensile deformation of Ti-7Al specimens. Samples with planar and random dislocation microstructures were prepared and characterized by electron microscopy. Stress tensors of individual grains were obtained at several loads up to 2% deformation. The stress tensors were found to rotate, and resolved shear stresses were calculated. High-resolution reciprocal space maps of selected grains were recorded. Azimuthal and radial distributions were visualized and discussed in terms of idealized dislocation structures. Heterogeneous grain rotations were observed for the planar microstructure and found to be consistent with activation of the highest stressed basal slip system. Intra-granular strain gradients were detected in excess of the intrinsic radial dislocation peak broadening. The potential of combining the applied techniques with modeling to obtain multiple length-scale information during deformation of bulk specimens is discussed.

36 MATERIALS SCIENCE↗

Development of an Amine Oxide Polyzwitterion Brush Martini Model with Polarizable Water and Ions

Abstract In order to accurately simulate the fouling process of proteins onto polyzwitterion brushes, models that accurately capture the hydration properties and chain conformations of such brushes must first be established. We developed a Martini coarse-grained (CG) model for amine oxide polyzwitterion (PNOMA) brushes, a promising class of antifouling materials, in polarizable water and ions by fitting to all-atom bond and angle distributions, monomer hydration free energy, monomer–monomer distance potential of mean force (PMF), and monomer–salt radial distribution functions (RDFs). Martini 2.2P was selected for compatibility with the established polarizable water and ion models. For comparison with PNOMA, we also constructed models for conventional sulfobetaine (PSBMA) and phosphorylcholine (PMPC) polyzwitterions and the polycation PMETAC using established nonbonded bead types from the literature and refitting bond and angle potentials. We simulated each polymer brush chemistry for varying grafting density and chain length, validating brush height scaling relations against experimental data. The CG models captured the relative hydration strengths among different polyzwitterion chemistries, and brush heights extrapolated to higher molecular weights are in agreement with experimental ellipsometry data. We find that chain swelling of the superhydrophilic PNOMA brushes lies between that of the traditional polyzwitterions PSBMA/PMPC and the polycation PMETAC. For PNOMA brushes in NaCl solution, simulated brush height decreases with salt concentration due to the selectively strong interactions between amine oxide and sodium ions.

Walker, Christopher C. [Oak Ridge National Laborat↗

Elucidating the Competitive Hydrodeoxygenation of Lignin-Derived Oxygenates over Bulk MoO 3 Catalyst through Kinetic Analysis

Ambient pressure hydrodeoxygenation (HDO) of lignin-derived oxygenates over molybdenum oxide-based catalysts is an effective strategy to produce chemicals that can be directly integrated into our existing petrochemical infrastructure. Complexities pertaining to the simultaneous kinetic and mechanistic analysis of HDO have limited research endeavors to single-compound systems. Although valuable insight into the catalytic reaction has been gained through this approach, it provides limited understanding of the competitive adsorption behavior manifest in a realistic multioxygenate reaction environment. To address this shortcoming, simultaneous gas-phase acetone and anisole HDO was performed at 330 °C and ≤1 bar H 2 partial pressure over bulk MoO 3 . Propene, propane, and benzene were the HDO products formed, showing a similar product distribution to the single-compound system. Selectivity to propene and propane was ∼14 times higher than benzene, even at three times higher anisole partial pressure compared to acetone. A negative anisole HDO (−0.97 ± 0.22) rate order with varying acetone partial pressure suggested a strong inhibition effect on anisole HDO by acetone. Conversely, with increasing anisole partial pressure, a rate order of −0.07 ± 0.12 was observed for acetone HDO, implying a weak impact of anisole cofeed on acetone HDO. A kinetic-driven approach was taken to estimate the relative adsorption constants of the oxygenates. Acetone exhibited a 6.4 times higher adsorption propensity on the HDO active site than anisole. Relative adsorption constants for phenolics increased with increasing basicity of the oxygenate but decreased for aliphatic molecules, suggesting a volcano-shaped relationship. The results suggest the possibility of an optimal electron density around the molecule’s oxygen atom to maximize the molecule’s adsorption strength.

acid sites↗

Conversion of Compositionally Diverse Plastic Waste over Earth-Abundant Sulfides

Chemical deconstruction of polyolefin plastic wastes via hydroconversion is promising for mitigating plastic accumulation in landfills and the environment. However, hydroconversion catalysts cannot handle complex feedstocks containing multiple polymers, additives, and heteroatom impurities. Here, we report a single-step strategy using earth-abundant metal sulfide catalysts to deconstruct these wastes. We show that NiMoS x /HY catalysts deconstruct polyolefin feedstocks, achieving ~81–94% selectivity to liquid products. Postsynthetic zeolite modification enhances the catalyst’s activity by >2.5 times, achieving over 95% selectivity to liquid fuels with controllable product distribution in the naphtha, jet fuel, and diesel range. The catalyst is resilient to increasingly complex feedstocks, such as additive-containing polymers and mixed plastics composed of polyolefins and heteroatom-containing polymers, including poly(vinyl chloride). As a result, we extend the strategy to single-use polyolefin wastes that can generate toxic byproducts, such as HCl and NH 3 , and eliminate their emissions by integrating reaction and sorption in a one-step process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying Progress Across Different CMIP Phases With the ESMValTool

Abstract More than 40 model groups worldwide are participating in the Coupled Model Intercomparison Project Phase 6 (CMIP6), providing a new and rich source of information to better understand past, present, and future climate change. Here, we use the Earth System Model Evaluation Tool (ESMValTool) to assess the performance of the CMIP6 ensemble compared to the previous generations CMIP3 and CMIP5. While CMIP5 models did not capture the observed pause in the increase in global mean surface temperature between 1998 and 2013, the historical CMIP6 simulations agree well with the observed recent temperature increase, but some models have difficulties in reproducing the observed global mean surface temperature record of the second half of the twentieth century. While systematic biases in annual mean surface temperature and precipitation remain in the CMIP6 multimodel mean, individual models and high‐resolution versions of the models show significant reductions in many long‐standing biases. Some improvements are also found in the vertical temperature, water vapor, and zonal wind speed distributions, and root‐mean‐square errors for selected fields are generally smaller with reduced intermodel spread and higher average skill in the correlation patterns relative to observations. An emerging property of the CMIP6 ensemble is a higher effective climate sensitivity with an increased range between 2.3 and 5.6 K. A possible reason for this increase in some models is improvements in cloud representation resulting in stronger shortwave cloud feedbacks than in their predecessor versions.

Bock, L.↗

Arsinothricin, an arsenic-containing non-proteinogenic amino acid analog of glutamate, is a broad-spectrum antibiotic

Abstract The emergence and spread of antimicrobial resistance highlights the urgent need for new antibiotics. Organoarsenicals have been used as antimicrobials since Paul Ehrlich’s salvarsan. Recently a soil bacterium was shown to produce the organoarsenical arsinothricin. We demonstrate that arsinothricin, a non-proteinogenic analog of glutamate that inhibits glutamine synthetase, is an effective broad-spectrum antibiotic against both Gram-positive and Gram-negative bacteria, suggesting that bacteria have evolved the ability to utilize the pervasive environmental toxic metalloid arsenic to produce a potent antimicrobial. With every new antibiotic, resistance inevitably arises. The arsN1 gene, widely distributed in bacterial arsenic resistance ( ars ) operons, selectively confers resistance to arsinothricin by acetylation of the α-amino group. Crystal structures of ArsN1 N -acetyltransferase, with or without arsinothricin, shed light on the mechanism of its substrate selectivity. These findings have the potential for development of a new class of organoarsenical antimicrobials and ArsN1 inhibitors.

59 BASIC BIOLOGICAL SCIENCES↗

Long-term multi-wavelength study of 1ES 0647+250

The BL Lac object 1ES 0647+250 is one of the few distant γ-ray emitting blazars detected at very high energies (VHEs; &100 GeV) during a non-flaring state. It was detected with the MAGIC telescopes during a period of low activity in the years 2009-2011 as well as during three flaring activities in the years 2014, 2019, and 2020, with the highest VHE flux in the last epoch. An extensive multi-instrument data set was collected as part of several coordinated observing campaigns over these years. We aim to characterise the long-term multi-band flux variability of 1ES 0647+250, as well as its broadband spectral energy distribution (SED) during four distinct activity states selected in four different epochs, in order to constrain the physical parameters of the blazar emission region under certain assumptions. We evaluated the variability and correlation of the emission in the different energy bands with the fractional variability and the Z transformed discrete correlation function, as well as its spectral evolution in X-rays and γ rays. Owing to the controversy in the redshift measurements of 1ES 0647+250 reported in the literature, we also estimated its distance in an indirect manner through a comparison of the GeV and TeV spectra from simultaneous observations with Fermi-LAT and MAGIC during the strongest flaring activity detected to date. Moreover, we interpret the SEDs from the four distinct activity states within the framework of one-component and two-component leptonic models, proposing specific scenarios that are able to reproduce the available multi-instrument data. We find significant long-term variability, especially in X-rays and VHE γ rays. Furthermore, significant (3-4σ) correlations were found between the radio, optical, and high-energy (HE) γ-ray fluxes, with the radio emission delayed by about ~400 days with respect to the optical and γ-ray bands. The spectral analysis reveals a harder-when-brighter trend during the non-flaring state in the X-ray domain. However, no clear patterns were observed for either the enhanced states or the HE (30 MeV < E < 100 GeV) and VHE γ-ray emission of the source. The indirect estimation of the redshift yielded a value of z = 0.45 ± 0.05, which is compatible with some of the values reported in the literature. The SEDs related to the low-activity state and the three flaring states of 1ES 0647+250 can be described reasonably well with the both one-component and two-component leptonic scenarios. However, the long-term correlations indicate the need for an additional radio-producing region located about 3.6 pc downstream from the gamma-ray producing region.

79 ASTRONOMY AND ASTROPHYSICS↗

Determining the CH{sub 3}SO{sub 2}{yields}CH{sub 3}+SO{sub 2} barrier from methylsulfonyl chloride photodissociation at 193 nm using velocity map imaging

These imaging experiments study the formation of the methylsulfonyl radical, CH{sub 3}SO{sub 2}, from the photodissociation of CH{sub 3}SO{sub 2}Cl at 193 nm and determine the energetic barrier for the radical's subsequent dissociation to CH{sub 3}+SO{sub 2}. We first state-selectively detect the angular and recoil velocity distributions of the Cl({sup 2}P{sub 3/2}) and Cl({sup 2}P{sub 1/2}) atoms to further refine the distribution of internal energy partitioned to the momentum-matched CH{sub 3}SO{sub 2} radicals. The internal energy distribution of the radicals is bimodal, indicating that CH{sub 3}SO{sub 2} is formed in both the ground state and low-lying excited electronic states. All electronically excited CH{sub 3}SO{sub 2} radicals dissociate, while those formed in the ground electronic state have an internal energy distribution which spans the dissociation barrier to CH{sub 3}+SO{sub 2}. We detect the recoil velocities of the energetically stable methylsulfonyl radicals with 118 nm photoionization. Comparison of the total recoil translational energy distribution for all radicals to the distribution obtained from the detection of stable radicals yields an onset for dissociation at a translational energy of 70{+-}2 kcal/mol. This onset allows us to derive a CH{sub 3}SO{sub 2}{yields}CH{sub 3}+SO{sub 2} barrier height of 14{+-}2 kcal/mol; this determination relies on the S-Cl bond dissociation energy, taken here as the CCSD(T) predicted energy of 65.6 kcal/mol. With 118 nm photoionization, we also detect the velocity distribution of the CH{sub 3} radicals produced in this experiment. Using the velocity distributions of the SO{sub 2} products from the dissociation of CH{sub 3}SO{sub 2} to CH{sub 3}+SO{sub 2} presented in the following paper, we show that our fastest detected methyl radicals are not from these radical dissociation channels, but rather from a primary S-CH{sub 3} bond photofission channel in CH{sub 3}SO{sub 2}Cl. We also present critical points on the ground state potential energy surface of CH{sub 3}SO{sub 2} at the //CCSD(T)/aug-cc-pV(Q+d)ZCCSD(T)/6-311++G(2df,p) level. We include harmonic zero-point vibrational corrections as well as core-valence and scalar-relativistic corrections. The CCSD(T) predicted barrier of 14.6 kcal/mol for CH{sub 3}SO{sub 2}{yields}CH{sub 3}+SO{sub 2} agrees well with our experimental measurement. These results allow us to predict the unimolecular dissociation kinetics of CH{sub 3}SO{sub 2} radicals and critique the analysis of prior time-resolved photoionization studies on this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical investigation of carrier transfer by an optical contacting scheme for optoelectronic application

As a promising charge carrier transfer scheme, optical coupling could potentially improve the performance of an optoelectronic device for energy harvesting based on well developed nanotechnology. By extracting carriers optically, the functional features of the nano-structured material could be better used by minimizing the concerns about its electrical properties. In this paper, we present a rigorous electromagnetic model to analyze the optical carrier transfer problem. The flow of the energy is analyzed carefully by the photon transfer spectrum, and the photon emitters (electron-hole pairs) are assumed in a thermal equilibrium described by Bose-Einstein distribution. The result shows that an energy selective carrier transfer can be optically achieved at the device level by integrating the emitter and receiver into a nano-optical resonator, where both the photon emission and absorption are significantly amplified by a near-field coupling around the resonant frequency. General design and optimization schemes in practice are addressed by examining the influence of the photonic design and an energy dependent emissivity of the emitter, which can be used to develop the optical contacting concept further.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vertical-cavity surface-emitting lasers with intracavity contacts and a rhomboidal current aperture for compact atomic clocks

Single-mode vertical-cavity surface-emitting lasers (VCSELs) with intracavity contacts, composite distributed Bragg reflectors, and a rhomboidal selectively-oxidised current aperture are studied. It is shown that the use of a rhomboidal current aperture allows the light output polarisation to be fixed without using a special surface relief and leads to efficient narrowing of the emission line with retaining a high slope efficiency. The developed VCSELs have a high output power (exceeding 1 mW), a threshold current below 1 mA, an effective modulation frequency exceeding 5 GHz, and a linewidth smaller than 60 MHz at increased (65 – 75 °C) temperatures and are promising for application in compact Cs vapour cell atomic clocks. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗