Search NASA⌕ Search

SEARCH · Search NASA

Results for “engine friction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Gas Flow Tightly Coupled to Elastoplastic Geomechanics for Tight- and Shale-Gas Reservoirs: Material Failure and Enhanced Permeability

We investigate coupled flow and geomechanics in gas production from extremely low permeability reservoirs such as tight and shale gas reservoirs, using dynamic porosity and permeability during numerical simulation. In particular, we take the intrinsic permeability as a step function of the status of material failure, and the permeability is updated every time step. We consider gas reservoirs with the vertical and horizontal primary fractures, employing the single and dynamic double porosity (dual continuum) models. We modify the multiple porosity constitutive relations for modeling the double porous continua for flow and geomechanics. The numerical results indicate that production of gas causes redistribution of the effective stress fields, increasing the effective shear stress and resulting in plasticity. Shear failure occurs not only near the fracture tips but also away from the primary fractures, which indicates generation of secondary fractures. These secondary fractures increase the permeability significantly, and change the flow pattern, which in turn causes a change in distribution of geomechanical variables. From various numerical tests, we find that shear failure is enhanced by a large pressure drop at the production well, high Biot's coefficient, low frictional and dilation angles. Smaller spacing between the horizontal wells also contributes to faster secondary fracturing. When the dynamic double porosity model is used, we observe a faster evolution of the enhanced permeability areas than that obtained from the single porosity model, mainly due to a higher permeability of the fractures in the double porosity model. These complicated physics for stress sensitive reservoirs cannot properly be captured by the uncoupled or flow-only simulation, and thus tightly coupled flow and geomechanical models are highly recommended to accurately describe the reservoir behavior during gas production in tight and shale gas reservoirs and to smartly design production scenarios.

02 PETROLEUM↗

A rheological model for loose sands with insights from DEM

A rheological model for loose granular media is developed to capture both solid-like and fluid-like responses during shearing. The proposed model is built by following the mathematical structure of an extended Kelvin–Voigt model, where an elastic spring and plastic slider act in parallel to a viscous damper. This arrangement requires the partition of the total stress into rate-independent and rate-dependent stress components. To model the solid-like behavior, a simple frictional plasticity model is adopted without modifications, thus contributing to the rate-independent stress. Instead, the fluid-like or rate-dependent stress is further decomposed into deviatoric and volumetric parts, by proposing a new formulation based on a combination of the μ(I) relation, originally developed under pressure-controlled shear, with a pressure-shear rate relation derived under volume-controlled shear. The proposed formulation allows the model to capture both the increase in the friction coefficient and the enhanced dilation at high shear rates. High-fidelity simulation data, obtained from discrete element method and multiscale modelling, are used to evaluate the performance of the proposed constitutive model. The model provides accurate results under both drained and undrained simple shear paths across a wide range of shear rates. Furthermore, it successfully reproduces at much lower computational cost the flowslide mobility computed through multiscale simulations, which is primarily regulated by the shear rate dependence of the material properties during the dynamic runout stage.

Elasticity↗

Experimental study on rheological and settling properties of shape memory polymer for fracture sealing in geothermal formations

This article studies the rheology and annular flow of a smart lost circulation material (LCM) at 160 °C, using a high-temperature flow loop. The smart LCM is a shape memory polymer (SMP) that activates at high temperatures, and its particle size increases to seal fractures in geothermal formations. SMP was mixed with the base fluid in two different concentrations, 1.0 and 3.0 wt%, to study rheology, wellbore hydraulics, activation process, and settling behavior under different testing conditions. The results of this study showed that the SMP could be activated at high temperatures. An increase of 80–100% in the particle size was observed at 160 °C. The mud samples showed a high shear-thinning behavior at the two concentrations with a Power-law flow index (n) ranging between 0.025 and 0.101. No additional frictional pressure losses were observed when SMP was added to the base fluid. SMP particles showed an excellent suspension at 1.0 wt% while, at 3.0 wt%, a bed was formed at a low flow rate and without pipe rotation. Increasing the drill pipe rotational speed or flow rate effectively removed the bed and homogeneously dispersed the SMP particles, ensuring a better sealing efficiency. SMP particle dispersion in inclined wells was better than in horizontal wells. Moreover, the findings of this study help optimize the lost circulation treatment by considering a wide range of operating parameters that can further be extended to different systems and geometries.

02 PETROLEUM↗

Toward Adaptive Mixed-Element Unstructured Grids for Simulations of Viscous Flows

Accurate prediction of surface skin friction and heat transfer for viscous flow applications using computational fluid dynamics tools necessitates thin wall-normal elements in the boundary layer. A tetrahedral adaptation process is extended to incorporate the advancing front local reconnection procedure. Thin boundary-layer grids are adapted from the solution, which governs the boundary-layer grid parameters such as first cell height off the wall. The process enables grid-converged steady-state results from a CAD file. Results are presented across the speed range from low subsonic flow over an airfoil to high-speed flows over blunt bodies and a rocket.

chemically reacting flow↗

A collision model for grain-resolving simulations of flows over dense, mobile, polydisperse granular sediment beds

We present a collision model for phase-resolved Direct Numerical Simulations of sediment transport that couple the fluid and particles by the Immersed Boundary Method. Typically, a contact model for these types of simulations comprises a lubrication force for particles in close proximity to another solid object, a normal contact force to prevent particles from overlapping, and a tangential contact force to account for friction. Our model extends the work of previous authors to improve upon the time integration scheme to obtain consistent results for particle-wall collisions. Furthermore, we account for polydisperse spherical particles and introduce new criteria to account for enduring contact, which occurs in many sediment transport situations. This is done without using arbitrary values for physically-defined parameters and by maintaining the full momentum balance of a particle in enduring contact. Lastly, we validate our model against several test cases for binary particle-wall collisions as well as the collective motion of a sediment bed sheared by a viscous flow, yielding satisfactory agreement with experimental data by various authors.

42 ENGINEERING↗

Control of friction at the nanoscale

Methods and apparatus are described for control of friction at the nanoscale. A method of controlling frictional dynamics of a plurality of particles using non-Lipschitzian control includes determining an attribute of the plurality of particles; calculating an attribute deviation by subtracting the attribute of the plurality of particles from a target attribute; calculating a non-Lipschitzian feedback control term by raising the attribute deviation to a fractionary power .xi.=(2m+1)/(2n+1) where n=1, 2, 3 . . . and m=0, 1, 2, 3 . . . , with m strictly less than n and then multiplying by a control amplitude; and imposing the non-Lipschitzian feedback control term globally on each of the plurality of particles; imposing causes a subsequent magnitude of the attribute deviation to be reduced.

42 ENGINEERING↗

Analytical modeling and simulation of electrical contact resistance for elastic rough electrode surface contact including frictional temperature rise

An improved electrical contact resistance (ECR) model for elastic rough electrode contact is proposed, incorporating the effects of asperity interactions and temperature rise by frictional and joule heating. The analytical simulation results show that the ECR decreases steeply at the beginning of the contact between Al and Cu. However, it becomes stabilized after reaching a specific contact force. It is also found that the longer elapsed sliding contact time, the higher ECR due to the increase in electrical resistivity of electrode materials by the frictional temperature rise at the interface. The effects of surface roughness parameters on ECR are studied through the 3 2 full-factorial design-of-experiment analysis. Based on the two representative roughness parameters, i.e., root-mean-square (rms) roughness and asperity radius, their individual and coupled effects on the saturated ECR are examined. The saturated ECR increases with the rms roughness for a rough machined surface condition, but it is hardly affected by the asperity radius. On the other hand, the saturated ECR increases with both the rms roughness and the asperity radius under a smooth thin film surface condition.

42 ENGINEERING↗

Friction Stir Scribe Joining of CFRP to Aluminum (Abstract)

The objective of this project is to develop and demonstrate friction stir scribe (FSS) joining of carbon fiber reinforced polymer (CFRP) to aluminum on light-duty vehicle body-in-white (BIW) joints. The project will also overcome the major obstacles of implementing FSS technology in a fully 3-D production robotic work cell and demonstrate the required CFRP-aluminum joint strengths in industrially relevant light-duty, BIW components. Specifically the project will develop the critical process technology, models and tools necessary to advance the FSS method through experimentation, validation at the laboratory scale, and integration into a production-like robotic environment. The ultimate goal is to demonstrate the technology on industrially relevant components based on process development and numerical simulation performed at scale.

42 ENGINEERING↗

Space Launch System Spacecraft and Payload Elements: Making Progress Toward First Launch

Significant and substantial progress continues to be accomplished in the design, development, and testing of the Space Launch System (SLS), the most powerful human-rated launch vehicle the United States has ever undertaken. Designed to support human missions into deep space, SLS is one of three programs being managed by the National Aeronautics and Space Administration's (NASA's) Exploration Systems Development directorate. The Orion spacecraft program is developing a new crew vehicle that will support human missions beyond low Earth orbit, and the Ground Systems Development and Operations program is transforming Kennedy Space Center into next-generation spaceport capable of supporting not only SLS but also multiple commercial users. Together, these systems will support human exploration missions into the proving ground of cislunar space and ultimately to Mars. SLS will deliver a near-term heavy-lift capability for the nation with its 70 metric ton (t) Block 1 configuration, and will then evolve to an ultimate capability of 130 t. The SLS program marked a major milestone with the successful completion of the Critical Design Review in which detailed designs were reviewed and subsequently approved for proceeding with full-scale production. This marks the first time an exploration class vehicle has passed that major milestone since the Saturn V vehicle launched astronauts in the 1960s during the Apollo program. Each element of the vehicle now has flight hardware in production in support of the initial flight of the SLS -- Exploration Mission-1 (EM-1), an un-crewed mission to orbit the moon and return. Encompassing hardware qualification, structural testing to validate hardware compliance and analytical modeling, progress in on track to meet the initial targeted launch date in 2018. In Utah and Mississippi, booster and engine testing are verifying upgrades made to proven shuttle hardware. At Michoud Assembly Facility in Louisiana, the world's largest spacecraft welding tool is producing tanks for the SLS core stage. This paper will particularly focus on work taking place at Marshall Space Flight Center (MSFC) and United Launch Alliance in Alabama, where upper stage and adapter elements of the vehicle are being constructed and tested. Providing the Orion crew capsule/launch vehicle interface and in-space propulsion via a cryogenic upper stage, the Spacecraft/Payload Integration and Evolution (SPIE) Element serves a key role in achieving SLS goals and objectives. The SPIE element marked a major milestone in 2014 with the first flight of original SLS hardware, the Orion Stage Adapter (OSA) which was used on Exploration Flight Test-1 with a design that will be used again on EM-1. Construction is already underway on the EM-1 Interim Cryogenic Propulsion Stage (ICPS), an in-space stage derived from the Delta Cryogenic Second Stage. Manufacture of the Orion Stage Adapter and the Launch Vehicle Stage Adapter is set to begin at the Friction Stir Facility located at MSFC while structural test articles are either completed (OSA) or nearing completion (Launch Vehicle Stage Adapter). An overview is provided of the launch vehicle capabilities, with a specific focus on SPIE Element qualification/testing progress, as well as efforts to provide access to deep space regions currently not available to the science community through a secondary payload capability utilizing CubeSat-class satellites.

Schorr, Andrew A.↗

Laminar drag reduction in microchannels with liquid infused textured surfaces

Liquid infused surfaces (LIS) achieve non-wetting properties through asperity structures containing pockets of a lubricating liquid rather than air. Although studies have demonstrated several potential applications of LIS, the effect of liquid infused texture on the flow of liquid in microchannels has not been systematically addressed. The present work focuses on the effect of liquid-infused texture geometry and the infused liquid properties on the flow characteristics of a bulk fluid in rectangular and round microchannel geometries. Considering four different textured geometries of transverse ridges, longitudinal ridges, in-lined square posts and staggered squares, a detailed parametric study is presented to assess the resulting drag reduction and friction factor, expressed in terms of the Poiseuille number, on the flow in microchannels. The effect of geometrical parameters is investigated for different asperity solid fraction (Φ s ), asperity height (h s ) and channel thickness (H) or tube diameter (D), while the effect of the infused fluid is studied in terms of a ratio of its viscosity relative to the viscosity of the flowing bulk fluid. Based on the results of the parametric study an extension of the conventional Moody diagram for non-wetting surfaces is developed. Finally, a design of experiments study is conducted to relate the drag reduction and Poiseuille number to the various governing parameters, using which conditions that maximize drag reduction are identified.

42 ENGINEERING↗

An Analytical Model for the Tension-Shear Coupling of Woven Fabrics with Different Weave Patterns under Large Shear Deformation

It is essential to accurately describe the large shear behavior of woven fabrics in the composite preforming process. An analytical model is proposed to describe the shear behavior of fabrics with different weave patterns, in which tension-shear coupling is considered. The coupling is involved in two parts, the friction between overlapped yarns and the in-plane transverse compression between two parallel yarns. By introducing the concept of inflection points of a yarn, the model is applicable for fabrics with different weave patterns. The analytical model is validated by biaxial tension-shear experiments. A parametric study is conducted to investigate the effects of external load, yarn geometry, and weave structure on the large shear behavior of fabrics. The developed model can reveal the physical mechanism of tension-shear coupling of woven fabrics. Moreover, the model has a high computational efficiency due to its explicit expressions, thus benefiting the material design process.

36 MATERIALS SCIENCE↗

Toward Adaptive Mixed-Element Unstructured Grids for Simulations of Viscous Flows

Accurate prediction of surface skin friction and heat transfer for viscous flow applications using computational fluid dynamics tools necessitates thin wall-normal elements in the boundary layer. A tetrahedral adaptation process is extended to incorporate the advancing front local reconnection procedure. Thin boundary-layer grids are adapted from the solution, which governs the boundary-layer grid parameters such as first cell height off the wall. The process enables grid-converged steady-state results from a CAD file. Results are presented across the speed range from low subsonic flow over an airfoil to high-speed flows over blunt bodies and a rocket.

CFD↗

Analysis of High-Power Diode Laser Heating Effects on HY-80 Steel for Laser Assisted Friction Stir Welding Applications

In this research, several conditions of high power diode laser heated HY-80 steel were characterized to determine the viability of using such lasers as a preheating source before friction stir welding in order to reduce frictional forces thereby reducing tool wear and increasing welding speeds. Differences in microstructures within heat affected zones were identified at specific laser powers and traverse speeds. Vickers hardness values were recorded and analyzed to validate the formation of additional martensite in diode laser heated regions of HY-80 steel. Conditions that produced little to no additional martensite were identified and relationships among high power diode laser power, traverse speed, and martensite formation were determined. The development of heat affected zones, change in grain structure, and creation of additional martensite in HY-80 can be prevented through the optimization of laser amperage and transverse speed.

36 MATERIALS SCIENCE↗

Space Launch System Spacecraft and Payload Elements: Making Progress Toward First Launch

Significant and substantial progress continues to be accomplished in the design, development, and testing of the Space Launch System (SLS), the most powerful human-rated launch vehicle the United States has ever undertaken. Designed to support human missions into deep space, SLS is one of three programs being managed by the National Aeronautics and Space Administration's (NASA's) Exploration Systems Development directorate. The Orion spacecraft program is developing a new crew vehicle that will support human missions beyond low Earth orbit, and the Ground Systems Development and Operations (GSDO) program is transforming Kennedy Space Center (KSC) into next-generation spaceport capable of supporting not only SLS but also multiple commercial users. Together, these systems will support human exploration missions into the proving ground of cislunar space and ultimately to Mars. SLS will deliver a near-term heavy-lift capability for the nation with its 70 metric ton Block 1 configuration, and will then evolve to an ultimate capability of 130 metric tons. The SLS program marked a major milestone with the successful completion of the Critical Design Review in which detailed designs were reviewed and subsequently approved for proceeding with full-scale production. This marks the first time an exploration class vehicle has passed that major milestone since the Saturn V vehicle launched astronauts in the 1960s during the Apollo program. Each element of the vehicle now has flight hardware in production in support of the initial flight of the SLS - Exploration Mission-1 (EM-1), an uncrewed mission to orbit the moon and return, and progress in on track to meet the initial targeted launch date in 2018. In Utah and Mississippi, booster and engine testing are verifying upgrades made to proven shuttle hardware. At Michoud Assembly Facility (MAF) in Louisiana, the world's largest spacecraft welding tool is producing tanks for the SLS core stage. This paper will particularly focus on work taking place at Marshall Space Flight Center (MSFC) and United Launch Alliance (ULA) in Alabama, where upper stage and adapter elements of the vehicle are being constructed and tested. Providing the Orion crew capsule/launch vehicle interface and in-space propulsion via a cryogenic upper stage, the Spacecraft/Payload Integration and Evolution (SPIE) Element serves a key role in achieving SLS goals and objectives. The SPIE element marked a major milestone in 2014 with the first flight of original SLS hardware, the Orion Stage Adapter (OSA) which was used on Exploration Flight Test-1 with a design that will be used again on EM-1. Construction is already underway on the EM-1 Interim Cryogenic Propulsion Stage (ICPS), an in-space stage derived from the Delta Cryogenic Second Stage. Manufacture of the Orion Stage Adapter and the Launch Vehicle Stage Adapter is set to begin at the Friction Stir Facility located at MSFC while structural test articles are either completed (OSA) or nearing completion (Launch Vehicle Stage Adapter). An overview is provided of the launch vehicle capabilities, with a specific focus on SPIE Element qualification/testing progress, as well as efforts to provide access to deep space regions currently not available to the science community through a secondary payload capability utilizing CubeSat-class satellites.

Schorr, Andrew A.↗

Computation of turbulent flows over backward and forward-facing steps using a near-wall Reynolds stress model

Separation and reattachment of turbulent shear layers is observed in many important engineering applications, yet it is poorly understood. This has motivated many studies on understanding and predicting the processes of separation and reattachment of turbulent shear layers. Both of the situations in which separation is induced by adverse pressure gradient, or by discontinuities of geometry, have attracted attention of turbulence model developers. Formulation of turbulence closure models to describe the essential features of separated turbulent flows accurately is still a formidable task. Computations of separated flows associated with sharp-edged bluff bodies are described. For the past two decades, the backward-facing step flow, the simplest separated flow, has been a popular test case for turbulence models. Detailed studies on the performance of many turbulence models, including two equation turbulence models and Reynolds stress models, for flows over steps can be found in the papers by Thangam & Speziale and Lasher & Taulbee). These studies indicate that almost all the existing turbulence models fail to accurately predict many important features of back step flow such as reattachment length, recovery rate of the redeveloping boundary layers downstream of the reattachment point, streamlines near the reattachment point, and the skin friction coefficient. The main objectives are to calculate flows over backward and forward-facing steps using the NRSM and to make use of the newest DNS data for detailed comparison. This will give insights for possible improvements of the turbulence model.

Ko, Sung HO↗

Laminar Flow Heat Transfer In Helical Oval-Twisted Tube for Heat Exchanger Applications

The heat transfer performance of a novel tube configuration that combines the swirling velocity induced by oval-twisting and secondary flow generated by a helical geometrical flow path is presented. The Nusselt number (Nu) and friction factor (f) are compared for the laminar flow regime (Re = 250- 2000) under isothermal wall conditions. Under the same flow and boundary conditions, the oval-twisted helical tube increased the Nu and slightly increased the f over the circular helical tube. The best performance with the highest Nuand lowest f occurs at the coil curvature ratio (d h /D) of 0.17. The quantified enhancement performance factor (h) shows a 46 - 56% increase for the oval-twisted helical tube over the circular helical tube with d h /D = 0.17. Correlations for the Nu and f are developed and agreed with the numerical results: ± 6% and ± 5% for the Nu and f, respectively.

42 ENGINEERING↗

Design of a Supercritical Carbon Dioxide Corrosion Test Rig for Tube-to-Tubesheet Joint and High Temperature Insulation Testing

Supercritical carbon dioxide (S-CO{sub 2}) Brayton cycles are attractive for thermal power generation since they offer highly efficient means of power generation (thermal solar, coal, nuclear, etc.) with a compact footprint, resulting in potential cost savings. The University of California, Berkeley (UCB) is developing an S-CO{sub 2}- Brayton Cycle design for advanced reactors using sodium and molten salt coolants. Coiled tube gas heaters (CTGH) made from 316L stainless steel are presently foreseen to transfer heat from a sodium or molten salt coolant at atmospheric pressure (approximately 0.1 MPa) to an S-CO{sub 2} power conversion fluid at very high pressure (approximately 20 MPa or more). CTGHs operate at temperatures of 400 to 700 deg. C where time-dependent creep is an important design issue. Given the high external pressure conditions and compressive stress, the highest stresses and creep rates in CTGH are expected to occur at the tube-to-tubesheet joints. UCB has developed different diffusion bonding techniques to fabricate 316L stainless steel tube-to-tubesheet joint dummies representative of the final design: press fitting and diffusion bonding, tube expansion and diffusion bonding as well as hybrid friction diffusion bonding. High pressure/temperature testing of such joints in an S-CO{sub 2} environment is important prior to deployment and will be foreseen with the corrosion test rig introduced in this work. This summary provides a brief overview of an Innovative S-CO, creep corrosion test rig for tube-to-tube sheet joint testing currently under construction at UCB. In contrast to other comparable test rigs, the design (1) makes the samples an active part of the pressure barrier and (2) uses internal insulation to reduce the temperature at the vessel wall, allowing the vessel to be manufactured from commercial carbon steel. (authors)

42 ENGINEERING↗

Pressure Drop Correlation Improvement for the Near-Wall Region of Pebble-Bed Reactors

Packed beds play an important role in several engineering fields, with their applications in nuclear energy being driven by the development of next-generation reactors utilizing pebble fuel. The random nature of a packed pebble bed creates a flow field that is complex and difficult to predict. Porous media models are an attractive option for modeling pebble-bed reactors (PBRs), as they provide intermediate fidelity results and are computationally efficient. Porous media models, however, rely on the use of correlations to estimate the effect of complicated flow features on the pressure drop and heat transfer in the system. Existing correlations were developed to predict the average behavior of the bed, but they are inaccurate in the near-wall region where the presence of the wall affects the pebble packing. This work aims to investigate the accuracy of a porous media model using the Kerntechnischer Ausschuss (KTA) correlation, the most common pressure drop correlation for PBRs compared to the high-fidelity large eddy simulation (LES). A bed of 1568 pebbles is investigated at Reynolds numbers from 625 to 10 000. The bed is divided into five concentric subdomains to compare the average velocity, friction losses, and form losses between the porous media and LES codes. The comparison between the LES simulation and the KTA correlation revealed that the KTA correlation largely underpredicts the form losses in the near-wall region, leading to an overprediction of the velocity near the wall by nearly 30%. An investigation of the form losses across the range of Reynolds numbers in the LES results provided additional insight into how the KTA correlation may be improved to better predict these spatial effects in a pebble bed. These data suggest that the form coefficient near the wall must be increased by 48% while decreasing the form coefficient of the inner bulk region of the bed by 15%. The implementation of these improvements to the KTA correlation in a porous media model produced a radial velocity profile that saw significantly improved agreement with the LES results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗