Search NASA⌕ Search

SEARCH · Search NASA

Results for “initial state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

From underlying event sensitive to insensitive: factorization and resummation

In this study we study the transverse energy spectrum for the Drell-Yan process. The transverse energy is measured within the central region defined by a (pseudo-) rapidity cutoff. Soft-collinear effective theory (SCET) is used to factorize the cross section and resum large logarithms of the rapidity cutoff and ratios of widely separated scales that appear in the fixed order result. We develop a framework which can smoothly interpolate between various regions of the spectrum and eventually match onto the fixed order result. This way a reliable calculation is obtained for the contribution of the initial state radiation to the measurement. By comparing our result for Drell-Yan against Pythia we obtain a simple model that describes the contribution from multiparton interactions (MPI). A model with little or no dependence on the primary process gives results in agreement with the simulation. Based on this observation we propose MPI insensitive measurements.

74 ATOMIC AND MOLECULAR PHYSICS↗

Searches for the Zγ decay mode of the Higgs boson and for new high-mass resonances in $pp$ collisions at $ \sqrt{s}=13 $ TeV with the ATLAS detector

This study presents searches for the Zγ decay of the Higgs boson and for narrow high-mass resonances decaying to Zγ, exploiting Z boson decays to pairs of electrons or muons. The data analysis uses 36.1 fb –1 of pp collisions at √s = 13 recorded by the ATLAS detector at the CERN Large Hadron Collider. The data are found to be consistent with the expected Standard Model background. The observed (expected — assuming Standard Model pp → H → Zγ production and decay) upper limit on the production cross section times the branching ratio for pp → H → Zγ is 6.6. (5.2) times the Standard Model prediction at the 95% confidence level for a Higgs boson mass of 125.09 GeV. In addition, upper limits are set on the production cross section times the branching ratio as a function of the mass of a narrow resonance between 250 GeV and 2.4 TeV, assuming spin-0 resonances produced via gluon-gluon fusion, and spin-2 resonances produced via gluon-gluon or quark-antiquark initial states. For high-mass spin-0 resonances, the observed (expected) limits vary between 88 fb (61 fb) and 2.8 fb (2.7 fb) for the mass range from 250 GeV to 2.4 TeV at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of low-$p_T$ electrons from semileptonic heavy-flavour hadron decays at mid-rapidity in pp and Pb-Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76$ TeV

Transverse-momentum ($p_T$) differential yields of electrons from semileptonic heavy-flavour hadron decays have been measured in the most central (0–10%) and in semi-central (20–40%) Pb–Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76$ TeV. The corresponding production cross section in pp collisions has been measured at the same energy with substantially reduced systematic uncertainties with respect to previously published results. The modification of the yield in Pb–Pb collisions with respect to the expectation from an incoherent superposition of nucleon-nucleon collisions is quantified at mid-rapidity (|$y$| < 0.8) in the $p_T$ interval 0.50-3 GeV/$c$ via the nuclear modi cation factor, $R_{AA}$. This paper extends the $p_T$ reach of the $R_{AA}$ measurement towards significantly lower values with respect to a previous publication. In Pb–Pb collisions the $p_T$-differential measurements of yields at low $p_T$ are essential to investigate the scaling of heavy-flavour production with the number of binary nucleon-nucleon collisions. Heavy-quark hadronization, a collective expansion and even initial-state effects, such as the nuclear modification of the Parton Distribution Function, are also expected to have a significant effect on the measured distribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of inclusive and differential cross-sections of $t\overline{t}\gamma$ production in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

Inclusive and differential cross-sections are measured at particle level for the associated production of a top quark pair and a photon ($t\overline{t}\gamma$). The analysis is performed using an integrated luminosity of 140 fb -1 of proton-proton collisions at a centre-of-mass energy of 13 TeV collected by the ATLAS detector. The measurements are performed in the single-lepton and dilepton top quark pair decay channels focusing on ($t\overline{t}\gamma$) topologies where the photon is radiated from an initial-state parton or one of the top quarks. The absolute and normalised differential cross-sections are measured for several variables characterising the photon, lepton and jet kinematics as well as the angular separation between those objects. The observables are found to be in good agreement with the Monte Carlo predictions. The photon transverse momentum differential distribution is used to set limits on effective field theory parameters related to the electroweak dipole moments of the top quark. The combined limits using the photon and the Z boson transverse momentum measured in $t\overline{t}$ production in associations with a Z boson are also set.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for new particles in events with energetic jets and large missing transverse momentum in proton-proton collisions at $ \sqrt{s} $ = 13 TeV

A search is presented for new particles produced at the LHC in proton-proton collisions at s√ = 13 TeV, using events with energetic jets and large missing transverse momentum. The analysis is based on a data sample corresponding to an integrated luminosity of 101 fb -1 , collected in 2017–2018 with the CMS detector. Machine learning techniques are used to define separate categories for events with narrow jets from initial-state radiation and events with large-radius jets consistent with a hadronic decay of a W or Z boson. A statistical combination is made with an earlier search based on a data sample of 36 fb -1 , collected in 2016. No significant excess of events is observed with respect to the standard model background expectation determined from control samples in data. The results are interpreted in terms of limits on the branching fraction of an invisible decay of the Higgs boson, as well as constraints on simplified models of dark matter, on first-generation scalar leptoquarks decaying to quarks and neutrinos, and on models with large extra dimensions. Several of the new limits, specifically for spin-1 dark matter mediators, pseudoscalar mediators, colored mediators, and leptoquarks, are the most restrictive to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Lighting up the LHC with Dark Matter

We show that simultaneously explaining dark matter and the observed value of the muon’s magnetic dipole moment may lead to yet unexplored photon signals at the LHC. We consider the Minimal Supersymmetric Standard Model with electroweakino masses in the few-to-several hundred GeV range, and opposite sign of the Bino mass parameter with respect to both the Higgsino and Wino mass parameters. In such region of parameter space, the spin-independent elastic scattering cross section of a Bino-like dark matter candidate in direct detection experiment is suppressed by cancellations between different amplitudes, and the observed dark matter relic density can be realized via Bino-Wino co-annihilation. Moreover, the observed value of the muon’s magnetic dipole moment can be explained by Bino and Wino loop contributions. Interestingly, “radiative” decays of Wino-like neutralinos into the lightest neutralino and a photon are enhanced, whereas decays into leptons are suppressed. While these decay patterns weaken the reach of multi-lepton searches at the LHC, the radiative decay opens a new window for probing dark matter at the LHC through the exploration of parameter space regions beyond those currently accessible. To complement the current electroweakino searches, we propose searching for a single (soft) photon plus missing transverse energy, accompanied by a hard initial state radiation jet.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Tevatron at the Frontier of Dark Matter Direct Detection

Direct detection of dark matter (DM) requires an interaction of dark matter particles with nucleons. The same interaction can lead to dark matter pair production at a hadron collider, and with the addition of initial state radiation this may lead to mono-jet signals. Mono-jet searches at the Tevatron can thus place limits on DM direct detection rates. We study these bounds both in the case where there is a contact interaction between DM and the standard model and where there is a mediator kinematically accessible at the Tevatron. We find that in many cases the Tevatron provides the current best limit, particularly for light dark matter, below 5 GeV, and for spin dependent interactions. Non-standard dark matter candidates are also constrained. The introduction of a light mediator significantly weakens the collider bound. A direct detection discovery that is in apparent conflict with mono-jet limits will thus point to a new light state coupling the standard model to the dark sector. Mono-jet searches with more luminosity and including the spectrum shape in the analysis can improve the constraints on DM-nucleon scattering cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of prompt D 0 , D + , D *+ , and DS+$ {\mathrm{D}}_{\mathrm{S}}^{+} $ production in p–Pb collisions at sNN$ \sqrt{{\mathrm{s}}_{\mathrm{NN}}} $ = 5.02 TeV

The measurement of the production of prompt D 0 , D + , D *+, and $D_S^+$ mesons in proton–lead (p–Pb) collisions at the centre-of-mass energy per nucleon pair of \mathrm{\sqrt{s_{NN}}}$ = 5.02 TeV, with an integrated luminosity of 292 ± 11 μb -1 , are reported. Differential production cross sections are measured at mid-rapidity (-96 < y cms < 0.04) as a function of transverse momentum (p T ) in the intervals 0 < p T < 36 GeV/c for D 0 , 1 < p T < 36 GeV/c for D + and D *+ , and 2 < p T < 24 GeV/c for D + mesons. For each species, the nuclear modification factor R pPb is calculated as a function of p T using a proton-proton (pp) reference measured at the same collision energy. The results are compatible with unity in the whole p T range. The average of the non-strange D mesons R pPb is compared with theoretical model predictions that include initial-state effects and parton transport model predictions. The p T dependence of the D 0 , D + , and D *+ nuclear modification factors is also reported in the interval 1 < p T < 36 GeV/c as a function of the collision centrality, and the central-to-peripheral ratios are computed from the D-meson yields measured in different centrality classes. The results are further compared with charged-particle measurements and a similar trend is observed in all the centrality classes. The ratios of the p T -differential cross sections of D 0 , D + , D *+ , and $D_S^+$ mesons are also reported. The $D_S^+$ and D + yields are compared as a function of the charged-particle multiplicity for several p T intervals. No modification in the relative abundances of the four species is observed with respect to pp collisions within the statistical and systematic uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Semi-visible jets + X: illuminating dark showers with radiation

We investigate the potential to search for semi-visible jets (SVJs) at the Large Hadron Collider (LHC) using initial-state radiation (ISR). Both photon ISR and jet ISR channels are considered, using a benchmark signal model with the decay of a leptophobic Z$^{′}$ mediator forming two SVJs. We compare and extend several techniques to decompose the missing transverse momentum into per-jet contributions, in order to reconstruct the mediator mass and to define a new observable measuring the fraction of invisible dark hadrons. The presence of ISR facilitates the identification of the SVJs, and the resulting boost improves the resolution of the observables, especially for models with high invisible fractions. We combine the two observables to propose a complete search strategy and discuss an extension of the strategy to probe the whole model parameter space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Studying the Sivers and Boer-Mulders function with Lattice QCD

Transverse momentum dependent parton distribution functions (TMDs) characterize the intrinsic momentum distribution of quarks inside the nucleon. However, they also encode final or initial state interactions of the processes in which they are measured, such as semi-inclusive deep inelastic scattering (SIDIS) or the Drell-Yan process (DY). Consequently certain TMDs are process-dependent and predicted to be equal but opposite in sign for SIDIS and DY. Extending our method on the lattice to non-local operators with U-shaped Wilson lines, we can study these naively time-reversal odd TMDs, in particular the Sivers- and the Boer-Mulders function. We express our results in terms of Fourier-transformed TMDs that appear naturally in the Fourier transformed cross section of, e.g., SIDIS, and in Bessel-weighted asymmetries. We discuss the method, its limitations and preliminary results from an exploratory calculation using lattices generated by the MILC and LHP collaborations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energy dissipation via acoustic emission in ductile crack initiation

In this article, we present a modeling approach to estimate the energy release due to ductile crack initiation in conjunction to the energy dissipation associated with the formation and propagation of transient stress waves typically referred to as acoustic emission. To achieve this goal, a ductile fracture problem is investigated computationally using the finite element method based on a compact tension geometry under Mode I loading conditions. To quantify the energy dissipation associated with acoustic emission, a crack increment is produced given a pre-determined notch size in a 3D cohesive-based extended finite element model. The computational modeling methodology consists of defining a damage initiation state from static simulations and linking such state to a dynamic formulation used to evaluate wave propagation and related energy redistribution effects. The model relies on a custom traction separation law constructed using full field deformation measurements obtained experimentally using the digital image correlation method. The amount of energy release due to the investigated first crack increment is evaluated through three different approaches both for verification purposes and to produce an estimate of the portion of the energy that radiates away from the crack source in the form of transient waves. The results presented herein propose an upper bound for the energy dissipation associated to acoustic emission, which could assist the interpretation and implementation of relevant nondestructive evaluation methods and the further enrichment of the understanding of effects associated with fracture.

42 ENGINEERING↗

Manifestation of Molecular Chromophore Polymorphism in Diffuse Vibronic Spectra

The location of the purely electronic 0–0-transition v{sub 0} for homomorphic chromophores is defined in the transition cross-section spectrum σ(ν) by the extremum (∂φ/∂v = 0) of the function [σ(ν)/ν] exp ((∓hv/2kT) = φ(|v − v{sub 0}|) and '–' for absorption, ν < ν{sub 0} and '+' for emission) for the dipole Frank–Condon transition with thermal distribution among the initial-state sublevels. The observed effective cross section and spectrum with polymorphism are formed by partial contributions of electronic transitions of the separate species with different ν{sub i0}. In this instance, the homomorphic extremum is distorted, i.e., broadened, weakened, or absent, which is also indicative of a polymorphic chromophore. Examples of these distortions of the functions calculated from the experimental spectra are given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Digital quantum simulation of non-equilibrium quantum many-body systems

Digital quantum simulation uses the capabilities of quantum computers to determine the dynamics of quantum systems, which are beyond the computability of modern classical computers. A notoriously challenging task in this field is the description of non-equilibrium dynamics in quantum many-body systems. In this study, we used the IBM quantum computers to simulate the non-equilibrium dynamics of few spin and fermionic systems. Our results reveal that with a combination of error mitigation, noise extrapolation and optimized initial state preparation, one can tackle the most important drawbacks of modern quantum devices. The systems we simulate demonstrate the potential for large-scale quantum simulations of light–matter interactions in the near future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solving MaxCut with quantum imaginary time evolution

We introduce a method to solve the MaxCut problem efficiently based on quantum imaginary time evolution (QITE). We employ a linear Ansatz for unitary updates and an initial state involving no entanglement, as well as an imaginary-time-dependent Hamiltonian interpolating between a given graph and a subgraph with two edges excised. We apply the method to thousands of randomly selected graphs with up to fifty vertices. We show that our algorithm exhibits a 93% and above performance converging to the maximum solution of the MaxCut problem for all considered graphs. Our results compare favorably with the performance of classical algorithms, such as the greedy and Goemans–Williamson algorithms. We also discuss the overlap of the final state of the QITE algorithm with the ground state as a performance metric, which is a quantum feature not shared by other classical algorithms.

97 MATHEMATICS AND COMPUTING↗

Aluminum Ion Beam Treatment of Zirconium Ceramics

The paper presents the radiation and thermal treatment of zirconium ceramics with high-energy Al ion beams generated at an accelerating voltage of 1.5 kV, which modifies the structure and electrophysical properties of zirconium ceramics. Compact powder and ceramic samples are used for the radiation and thermal treatment performed at 1123–1173 K. The surface treatment of compact powders leads to the increase in the grain size, whereas the surface of ceramic samples turns black and electrically conductive in depth. This is because the change in the oxygen stoichiometry of zirconium ceramics. Air annealing of treated ceramics returns the sample to the initial state. The phase composition, microhardness and density of ceramic samples display no changes after the radiation and thermal treatment. Under the experimental conditions, the diffusion of aluminum ions in the surface layer is not observed. It is found that the ion beam treatment leads to the decrease in aluminum-containing impurity in the surface layers of zirconium ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Phase Composition of Heat-Resistant Ni–Al–Co Alloy After Annealing and Creep

The paper presents research into the structure and phase composition of Ni–Al–Co alloy modified by rhenium (~3 аt.%) alloying. Observations are carried out using the transmission electron microscopy. The initial state of the alloy is the state after the directional crystallization. The alloy is further subjected to 900°С annealing during 1143 h. Creep tests are additionally carried out for this alloy at the same temperature and time and 400 MPa load. It is shown that FCC disordered γ- and ordered γ′-phases are major in all alloy states. Secondary phases are found to be σ-phase, χ-phase, Laves and AlRe{sub 2} phases. Experiments show that the high temperature annealing changes the phase composition of the alloy. Thus, the amount of the ordered γ′-phase increases, while that of disordered γ-phase decreases. During the creep process, the amount of the former reduces and the amount of the latter increases. The annealing process modifies the phase composition in secondary phases. It is found that the structural modification caused by the creep process differs from that caused by the annealing process. Thus, the creep-induced modification of the cuboid structure in γ′-phase is stronger than due to annealing. Dislocations are observed in γ- and γ′-phases in all states of the alloy. During the annealing process, the dislocation density in γ-phase is higher than in γ′-phase, and vice versa during the creep process. The experiments show that the behavior of the dislocation structures is different during the annealing and creep processes.

36 MATERIALS SCIENCE↗

Laser-Hardened and Ultrasonically Peened Surface Layers on Tool Steel AISI D2: Correlation of the Bearing Curves’ Parameters, Hardness and Wear

This paper is focused on the effects of the separately applied laser heat treatment (LHT) and ultrasonic impact treatment (UIT) and the combined LHT + UIT process on the wear and friction behaviors of the hardened surface layers of the tool steel AISI D2. In comparison with the initial state, wear losses of the treated specimens after long-term wear tests were decreased by 68, 41, and 77% at the LHT, UIT, and combined LHT + UIT processes, respectively. The Abbott–Firestone bearing curves were used to analyze the material ratio and functional characterization (bearing capacity and oil capacitance) of the studied surface specimens. The wear losses registered after short (15 min) tests correlate well with the changes in experimental surface roughness Ra, and the predictive Rpk, and bearing capacity B{sub C} parameters, respectively, evaluated using the Abbott–Firestone curves and Kragelsky–Kombalov formula. The wear losses after the long-term (45 min) tests are in good correlation with the reciprocal surface microhardness HV and with the W{sub L} and W{sub P} wear parameters, respectively, estimated using Archard–Rabinowicz formula and complex roughness-and-strength approach. The observed HV increase is supported by nanotwins (LHT), by dense dislocation nets (UIT), and by dislocation cells/nanograins fixed with fine carbides (LHT + UIT) formed in the surface layers of the steel.

36 MATERIALS SCIENCE↗

Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure

The surface roughness, residual stress, and microstructure of AISI 304 stainless steel specimens after laser shock peening (LSP), water jet cavitation peening (WjCP), water jet shot peening (WjSP), and multi-pin ultrasonic impact treatment (UIT) were studied in this work. Compared to the initial state, the surface roughness (Ra) was, respectively, decreased by approx. 5.5, 7.8, 38.2, and 91.1% after the LSP, WjCP, WjSP, and UIT processes. The volume fraction of ε-martensite of ~ 3-5% was observed in all treated specimens except for the LSP-treated ones. The volume fraction of α′-martensite was increased in the following sequence: WjCP (~ 5%), LSP (~ 5%), WjSP (~ 25%), UIT (~ 50%). The studied mechanical surface treatments promote a significant reduction in grains size of both austenite (~ 15-20 nm) and martensite (~ 20-37 nm) leading to essential hardening. All studied processes result in the formation of compressive residual stresses (− 377…693 MPa) and the improvement in the bearing curve parameters. The microhardness estimated accounting for the contributions of different hardening mechanisms to the yield strength magnitude correlates well with the experimental data. The grain boundary hardening and dislocation hardening are concluded to be the most influential mechanisms.

36 MATERIALS SCIENCE↗