Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Pattern selection in a boundary-layer model of dendritic growth in the presence of impurities

Presently analyzed, in the context of a boundary-layer model, is the problem of pattern selection in dendritic growth in a situation where impurities are present in the undercooled liquid. It is found that the tip-velocity selection criterion that has been proposed recently for the geometrical model and the boundary-layer model of a pure substance can be extended, in a nontrivial way, to this more complex situation where two coupled diffusion fields (temperature and solute) determine the interface dynamics. This model predicts a sharp enhancement of tip velocity in good qualitative agreement with experiment. This agreement is consistent with the conjecture that a solvability condition can be used to determine the operating point of the dendrite in the full nonlocal problem.

Karma, A.↗

NSC 800, 8-bit CMOS microprocessor

The NSC 800 is an 8-bit CMOS microprocessor manufactured by National Semiconductor Corp., Santa Clara, California. The 8-bit microprocessor chip with 40-pad pin-terminals has eight address buffers (A8-A15), eight data address -- I/O buffers (AD(sub 0)-AD(sub 7)), six interrupt controls and sixteen timing controls with a chip clock generator and an 8-bit dynamic RAM refresh circuit. The 22 internal registers have the capability of addressing 64K bytes of memory and 256 I/O devices. The chip is fabricated on N-type (100) silicon using self-aligned polysilicon gates and local oxidation process technology. The chip interconnect consists of four levels: Aluminum, Polysi 2, Polysi 1, and P(+) and N(+) diffusions. The four levels, except for contact interface, are isolated by interlevel oxide. The chip is packaged in a 40-pin dual-in-line (DIP), side brazed, hermetically sealed, ceramic package with a metal lid. The operating voltage for the device is 5 V. It is available in three operating temperature ranges: 0 to +70 C, -40 to +85 C, and -55 to +125 C. Two devices were submitted for product evaluation by F. Stott, MTS, JPL Microprocessor Specialist. The devices were pencil-marked and photographed for identification.

Suszko, S. F.↗

Variable Property Flow in Rectangular Ducts with Repeated Rectangular Rib Roughness

PHOENICS was used to simulate turbulent flow of supercritical hydrogen through asymmetrically heated rectangular ducts with one side rib-roughened, in order to provide design data for active cooling systems of hypersonic aircraft where the hydrogen fuel is used as coolant. Variable property and conjugate heat transfer effects were considered. The computations using PHOENICS required provision of property sub-routines for supercritical hydrogen, a low-Reynolds number form of the k-epsilon turbulence model, a rough-wall wall function and a procedure for calculating proper diffusion coefficients at the fluid-solid interface. The effect of each design variable such as width and height of duct and wall thickness, on pressure drop and maximum wall temperature was investigated. PHOENICS version 1.4 was used on an IBM 3090 computer.

Youn, B.↗

Adsorption and solvation of ethanol at the water liquid-vapor interface: a molecular dynamics study

The free energy profiles of methanol and ethanol at the water liquid-vapor interface at 310K were calculated using molecular dynamics computer simulations. Both alcohols exhibit a pronounced free energy minimum at the interface and, therefore, have positive adsorption at this interface. The surface excess was computed from the Gibbs adsorption isotherm and was found to be in good agreement with experimental results. Neither compound exhibits a free energy barrier between the bulk and the surface adsorbed state. Scattering calculations of ethanol molecules from a gas phase thermal distribution indicate that the mass accommodation coefficient is 0.98, and the molecules become thermalized within 10 ps of striking the interface. It was determined that the formation of the solvation structure around the ethanol molecule at the interface is not the rate-determining step in its uptake into water droplets. The motion of an ethanol molecule in a water lamella was followed for 30 ns. The time evolution of the probability distribution of finding an ethanol molecule that was initially located at the interface is very well described by the diffusion equation on the free energy surface.

NASA Discipline Exobiology↗

Offset-Stoichiometric Reflowable Composite Bonding Method with Adhesive for Mitigating Strict Faying Surface Tolerances

Inherent susceptibility of adhesive bonds to miniscule quantities of contamination can cause undetectable weakened bonds. For this reason, the Federal Aviation Administration (FAA) places strict regulations on adhesively bonded joints in primary aircraft structures. To meet certification requirements aircraft manufactures resort to redundant load paths in the form of fasteners which inherently add weight to the structure and increase manufacturing time. In prior work, a secondary bonding technique called AERoBOND was developed, which utilized off-stoichiometric epoxymatrix resins to facilitate reflow and diffusion of the resin within the joint interface during a secondary bonding/cure process, thus achieving a bond similar to a co-cured joint. However, the AERoBOND process required tight spatial tolerances between the two parts being joined. This study examined the utilization of conventional adhesive with the AERoBOND method to act as a filler in the joint line, effectively reducing the need for tight tolerances on the joining parts and serving as a flexible alternative for existing manufacturing processes. Ultrasonic inspection, optical microscopy, and ASTM International standard tests were performed to analyze the joints for defects and to quantify the mode-I and mode-II interlaminar fracture toughness and short beam strength of the proposed methodology with varying manufacturing parameters. The comprehensive results indicate that the AERoBOND+ method with and without surface preparation performs comparably to co-cured and conventional, adhesively bonded joints when secondary cured in an autoclave with 791 kPa of pressure. As an example, the AERoBOND+ panel without surface preparation bonded with 791 kPa of pressure (referred to as AB+3 throughout paper) had a mode-I fracture toughness (G Ic ) of 0.643 kJ/m 2 and a mode-II fracture toughness (G IIc ) of 4.000 kJ/m 2 in the non-precracked condition and 4.218 kJ/m 2 in the precracked condition at the adhesive-to-prepreg interface. These results were 96%, 142%, and 217%, respectively, of a co-cured baseline panel (referred to as C1 throughout paper).

Composites↗

Effect of film morphology on oxygen and water interaction with copper phthalocyanine

Copper phthalocyanine (CuPc) films of thickness 25 nm and 100 nm were grown by thermal sublimation at 25 C, 150 C, and 250 C in order to vary morphology. Using a source-measure unit and a quartz crystal microbalance (QCM), we measured changes in electrical resistance and film mass in situ during exposure to controlled pulses of O2 and H2O vapor. Mass loading by O2 was enhanced by a factor of 5 in films deposited at 250 C, possibly due to the ~200 C CuPc transition which allows higher O2 mobility between stacked molecules. While gas/vapor sorption occurred over timescales of < 10 minutes, resistance change occurred over timescales > 1 hour, suggesting that mass change occurs by rapid adsorption at active surface sites, whereas resistive response is dominated by slow diffusion of adsorbates into the film bulk. Resistive response generally increases with film deposition temperature due to increased porosity associated with larger crystalline domains. The 25 nm thick films exhibit higher resistive response than 100 nm thick films after an hour of O2/H2O exposure due to the smaller analyte diffusion length required for reaching the film/electrode interface. We found evidence of decoupling of CuPc from the gold-coated QCM crystal due to preferential adsorption of O2/H2O molecules on gold, which is consistent with findings of other studies.

Miller, Nicholas↗

Understanding the Reliability of Solder Joints Used in Advanced Structural and Electronics Applications: Part 2 - Reliability Performance.

Whether structural or electronic, all solder joints must provide the necessary level of reliability for the application. The Part 1 report examined the effects of filler metal properties and the soldering process on joint reliability. Filler metal solderability and mechanical properties, as well as the extents of base material dissolution and interface reaction that occur during the soldering process, were shown to affect reliability performance. The continuation of this discussion is presented in this Part 2 report, which highlights those factors that directly affect solder joint reliability. There is the growth of an intermetallic compound (IMC) reaction layer at the solder/base material interface by means of solid-state diffusion processes. In terms of mechanical response by the solder joint, fatigue remains as the foremost concern for long-term performance. Thermal mechanical fatigue (TMF), a form of low-cycle fatigue (LCF), occurs when temperature cycling is combined with mismatched values of the coefficient of thermal expansion (CTE) between materials comprising the solder joint “system.” Vibration environments give rise to high-cycle fatigue (HCF) degradation. Although accelerated aging studies provide valuable empirical data, too many variants of filler metals, base materials, joint geometries, and service environments are forcing design engineers to embrace computational modeling to predict the long-term reliability of solder joints.

42 ENGINEERING↗

Interaction transfer of silicon atoms forming Co silicide for Co/√(3)×√(3)R30°-Ag/Si(111) and related magnetic properties

Combined scanning tunneling microscopy, Auger electron spectroscopy, and surface magneto-optic Kerr effect studies were employed to study the microscopic structures and magnetic properties for ultrathin Co/√(3)×√(3)R30°-Ag/Si(111). As the annealing temperature increases, the upward diffusion of Si atoms and formation of Co silicides occurs at temperature above 400 K. Below 600 K, the √(3)×√(3)R30°-Ag/Si(111) surface structure persists. We propose an interaction transferring mechanism of Si atoms across the √(3)×√(3)R30°-Ag layer. The upward transferred Si atoms react with Co atoms to form Co silicide. The step height across the edge of the island, a separation of 0.75 nm from the analysis of the 2 × 2 structure, and the calculations of the normalized Auger signal serve as strong evidences for the formation of CoSi{sub 2} at the interface. The interaction transferring mechanism for Si atoms enhances the possibility of interactions between Co and Si atoms. The smoothness of the surface is advantage for that the easy axis of magnetization for Co/√(3)×√(3)R30°-Ag/Si(111) is in the surface plane. This provides a possible way of growing flat magnetic layers on silicon substrate with controllable silicide formation and shows potential applications in spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combined Raman imaging and {sup 18}O tracer analysis for the study of high temperature oxidation of pre-oxidized Zircaloy-4 in spent fuel pool accident - 6.4 STP-2016-0037

Oxidation at high temperature of Zr-based cladding materials is expected to be the primary cause of the fuel assemblies' degradation in Spent Fuel Storage Pool loss of cooling accidents. Differently from Loss Of Coolant Accident (LOCA) in reactor vessel, presence of air in the atmosphere in case of a spent fuel pool accident is known to be an aggravating factor because of the 'catalytic' role of nitrogen on the oxidation. 'Low temperature' oxidation scales simulating corrosion oxide formed during normal operation have been observed to have a protective effect regarding subsequent high temperature oxidation, in steam as well as in air and air + steam atmospheres. However, in the presence of nitrogen, this protective effect is lost much earlier than in pure steam or pure oxygen. We present results on oxygen transport through such corrosion oxide layers studied using an {sup 18}O tracer technique. Experiments were performed in {sup 18}O{sub 2} alone as well as in mixed {sup 18}O{sub 2} + N{sub 2} atmospheres, at 850 deg. C, a temperature for which nitrogen is known to have a strong effect on the Zr-based alloys oxidation. Post-test investigations of the specimens were performed by means of micro-Raman profiling or imaging, giving simultaneous information on the {sup 18}O distribution and on structural factors such as composition and stresses in the scales. Raman imaging gave clear evidence for different characteristic distributions of {sup 18}O in the scales. Some of them have been correlated with the development of cracks and porosity in the oxide which allows oxygen to locally penetrate in the scales. Although nitrogen appears to have no or limited influence on the oxygen diffusion, it is observed to reach the metal/oxide interface much faster than oxygen. A mechanism explaining the role of nitrogen on the loss of the protective effect and the kinetic acceleration observed by TGA is proposed. (authors)

36 MATERIALS SCIENCE↗

Fabrication of Monolithic RERTR Fuels by Hot Isostatic Pressing

The RERTR (Reduced Enrichment for Research and Test Reactors) Program is developing advanced nuclear fuels for high-power test reactors. Monolithic fuel design provides higher uranium loading than that of the traditional dispersion fuel design. Hot isostatic pressing is a promising process for low-cost batch fabrication of monolithic RERTR fuel plates for these high-power reactors. Bonding U Mo fuel foil and 6061 Al cladding by hot isostatic press bonding was successfully developed at Idaho National Laboratory. Due to the relatively high processing temperature, the interaction between fuel meat and aluminum cladding is a concern. Two different methods were employed to mitigate this effect: (1) a diffusion barrier and (2) a doping addition to the interface. Both types of fuel plates have been fabricated by hot isostatic press bonding. Preliminary results show that the direct fuel/cladding interaction during the bonding process was eliminated by introducing a thin zirconium diffusion barrier layer between the fuel and the cladding. Fuel plates were also produced and characterized with a silicon-rich interlayer between fuel and cladding. This paper reports the recent progress of this developmental effort and identifies the areas that need further attention.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hydro-chemo-mechanical phase field formulation for corrosion induced cracking in reinforced concrete

Steel corrosion induced cracking in reinforced concrete structures is often caused by volumetric straining at the steel-concrete interface. This volumetric strain is mainly controlled by the rate of generation of corrosion product, which depends on the diffusion of Cl{sup −} and dissolved O{sub 2} as well as the chemical reaction at the steel-concrete interface. While many numerical modeling techniques have been proposed to tackle this complex phenomenon, most have been limited to using staggered solution schemes, where the diffusion, chemical reaction, mechanical strain, and crack fields are solved for separately. Unfortunately, such approaches introduce numerical errors that can lead to unrealistic predictions. Therefore, a coupled solution, is needed to remove the formulation induced errors and understand this complex phenomenon. To provide a unifying solution framework for corrosion induced cracking in reinforced concrete, a phase field formulation is presented and implemented with FEM algorithms. The governing equations are derived from the system's free energy and Fick's law of diffusion. The proposed formulation was first validated in 1D by comparing the modeling results with the semi-analytical solution approximated via Laurent series to avoid singularities in the complex domain. 2D plane strain solutions to the embedded rebar undergoing corrosion induced cracking with pre-cracks are also presented and compared with the approximated solutions from linear elastic fracture mechanics theory (LEFM). The modeling of crack propagation enabled by the proposed formulation is also presented along with parametric studies to reveal the roles of the fracture toughness and permeability of the concrete on the corrosion induced cracking. A case study was also conducted on H-pile steel with concrete jackets to demonstrate the feasibility of modeling corrosion induced fracture in reinforced concrete structures with complex steel-concrete interfaces.

36 MATERIALS SCIENCE↗

Modulating electronic coupling at the quantum dot/molecule interface by wavefunction engineering

In this work, we use wavefunction engineering by varying the size of Quantum Dots (QDs) and tuning the delocalization (or diffuseness) of frontier orbitals of an acceptor molecule to modulate charge transfer dynamics at the QD/molecule interface. For this purpose, we apply our recently developed bulk-adjusted linear combination of atomic orbitals (BA-LCAO) approach for nanostructures and a density functional theory (DFT) for the acceptor molecules. These electronic structure calculations, combined with extensive molecular dynamics simulations using a fragmented molecular mechanics (FraMM) force field, reveal intimate details of charge transfer across the QD/Acceptor interface. For the spherical wurtzite-(CdSe) 201 and (CdSe) 693 nanostructures, as model QDs with respective 2.8 and 4.1 nm diameters, and anthraquinone-2,3-dicarboxylic acid and its derivatives with the 7-OH, 7-OF, 10-BH, and 10-CH 2 substituents, as model molecular acceptors, we find that (1) both the electron donating and withdrawing groups greatly enhance hole transfer by means of diffusing the acceptor HOMO; (2) electron transfer is affected only by the electron donating groups; (3) solvent effects are largely negligible for the orbital overlaps, and (4) consistent with spatial confinement theories, the electron density of the smaller QD penetrates farther into the vacuum than the corresponding density of the larger QD leading to stronger coupling with the acceptor. These findings suggest that (a) one can effectively control charge transfer across the QD/molecule interface by either changing the size of the QD or by tuning diffuseness of frontier orbitals of the acceptor molecule and (b) the combination of the recently developed BA-LCAO approach for QDs with a DFT for the acceptor molecules, facilitated by the use of the FraMM force field and extensive molecular dynamics simulations, provide qualitatively accurate description of charge transfer dynamics at the QD/acceptor interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles investigation of cerium and neodymium diffusion in BCC chromium and vanadium via vacancy-mediated transport

Lanthanide transport plays a crucial role in the performance and longevity of metallic nuclear fuels. This study examines the diffusion behavior of Ce and Nd—two major fission products—in body-centered cubic (BCC) Cr and V, which are potential liner or coating materials for mitigating fuel-cladding chemical interactions (FCCI). Using density functional theory (DFT) calculations and self-consistent mean-field (SCMF) analysis, the vacancy-mediated diffusion coefficients are evaluated. Our findings reveal that Ce and Nd act as oversized solutes and are strongly bound to vacancies in BCC Cr and V, with diffusivities in Cr significantly lower than in V and in hexagonal closed-packed (HCP) Zr, as investigated in our previous work. The activation energies for Ce and Nd diffusion are 3.39 and 3.32 eV, respectively, in BCC Cr, and 2.56 and 2.33 eV, respectively, in BCC V. Analysis of vacancy drag and partial diffusion coefficient ratios indicates a strong tendency for lanthanide enrichment at vacancy sinks in BCC Cr, and to a lesser extent in BCC V, with this effect persisting up to the melting point in Cr and remaining substantial for Nd in V at high temperatures. Under irradiation, the increase in vacancy concentration is expected to enhance lanthanide transport, potentially accelerating interactions at liner-cladding interfaces. Although BCC Cr exhibits relatively low lanthanide diffusivities under equilibrium conditions, the expected segregation tendencies under irradiation suggest that Zr liners may be a more favorable option. Further investigations using rate theory, cluster dynamics, and phase-field modeling are required to quantitatively assess the performance of these materials in reactor environments.

36 - MATERIALS SCIENCE↗

Weak scaling of the contact distance between two fluctuating interfaces with system size

A pair of flat parallel surfaces, each freely diffusing along the direction of their separation, will eventually come into contact. If the shapes of these surfaces also fluctuate, then contact will occur when their centers-of-mass remain separated by a nonzero distance ℓ. An example of such a situation is the motion of interfaces between two phases at conditions of thermodynamic coexistence, and in particular the annihilation of domain wall pairs under periodic boundary conditions. Here we present a general approach to calculate the probability distribution of the contact distance ℓ and determine how its most likely value ℓ* depends on the surfaces' lateral size L. Using the Edward-Wilkinson equation as a model for interfaces, we demonstrate that ℓ* scales weakly with system size, i.e., the dependence of ℓ* on L for both (1+1)- and (2+1)-dimensional interfaces is such that lim L→∞ (ℓ*/L) = 0. In particular, for (2+1)-dimensional interfaces ℓ* is an algebraic function of logL, a result that is confirmed by computer simulations of slab-shaped domains formed under periodic boundary conditions. Overall, this weak scaling implies that such domains remain topologically intact until ℓ becomes very small compared to the lateral size of the interface, contradicting expectations from equilibrium thermodynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Implementation and Evaluation of the Emergency Response Dose Assessment System (ERDAS) at Cape Canaveral Air Station/Kennedy Space Center

The Emergency Response Dose Assessment System (ERDAS) is a system which combines the mesoscale meteorological prediction model RAMS with the diffusion models REEDM and HYPACT. Operators use a graphical user interface to run the models for emergency response and toxic hazard planning at CCAS/KCS. The Applied Meteorology Unit has been evaluating the ERDAS meteorological and diffusion models and obtained the following results: (1) RAMS adequately predicts the occurrence of the daily sea breeze during non-cloudy conditions for several cases. (2) RAMS shows a tendency to predict the sea breeze to occur slightly earlier and to move it further inland than observed. The sea breeze predictions could most likely be improved by better parameterizing the soil moisture and/or sea surface temperatures. (3) The HYPACT/REEDM/RAMS models accurately predict launch plume locations when RAMS winds are accurate and when the correct plume layer is modeled. (4) HYPACT does not adequately handle plume buoyancy for heated plumes since all plumes are presently treated as passive tracers. Enhancements should be incorporated into the ERDAS as it moves toward being a fully operational system and as computer workstations continue to increase in power and decrease in cost. These enhancements include the following: activate RAMS moisture physics; use finer RAMS grid resolution; add RAMS input parameters (e.g. soil moisture, radar, and/or satellite data); automate data quality control; implement four-dimensional data assimilation; modify HYPACT plume rise and deposition physics; and add cumulative dosage calculations in HYPACT.

Evans, Randolph J.↗

Operando liquid cell electron microscopy of discharge and charge kinetics in lithium-oxygen batteries

Despite the promising future of lithium-oxygen (Li-O 2 ) battery in replacing conventional lithium ion battery for high-energy applications, the complicated reaction mechanisms determining the sluggish discharge-charge kinetics have not been fully understood. Here, utilizing in situ liquid transmission electron microscopy, the (electro) chemical fundamentals in a working Li-O 2 battery is explored. During discharge, the nucleation of Li 2 O 2 is observed at the carbon electrode/electrolyte interface, and the following growth process exhibits Li + diffusion-limited kinetics. Nucleation and growth of Li 2 O 2 are also observed within the electrolyte, where there is no direct contact with the carbon electrode indicating the existence of non-Faradaic disproportionation reaction of intermediate LiO 2 into Li 2 O 2 . The growth of Li 2 O 2 isolated in the electrolyte exhibits O 2 - diffusion-limited kinetics. Li 2 O 2 at the carbon electrode surface and isolated in the electrolyte are both active upon charging and gradually decomposed. For Li 2 O 2 particles rooted at the carbon electrode surface, the decomposition starts at the electrode/Li 2 O 2 interface indicating electron-conduction limited charge kinetics. For Li 2 O 2 isolated within the electrolyte, surprisingly, a side-to-side decomposition mode is identified indicating the non-Faradaic formation of dissolvable O 2 - , whose diffusion in the electrolyte controls the overall charge kinetics. In conclusion, this work reveals further details of underlying mechanisms in a working Li-O 2 battery and identifies various limiting factors controlling the discharge and charge processes.

25 ENERGY STORAGE↗

Analysis of models for two solution crystal growth problems

Two diffusive solution crystal growth models are considered which are characterized by two phases separated by an interface, a lack of convective mixing in either phase, and the presence of diffusion components differing widely in diffusivity. The first model describes precipitant-driven solution crystal growth and the second model describes a hanging drop evaporation problem. It is shown that for certain proteins sharp concentration gradients may develop in the drop during evaporation, while under the same conditions the concentrations of other proteins remain uniform.

Fehribach, Joseph D.↗

Atomic scale analysis of Nb3Sn on Nb prepared by a vapor-diffusion process for superconducting radiofrequency cavity applications

We report an atomic-scale analysis of the microstructure of Nb3Sn coating on Nb prepared by vapor diffusion process for superconducting radiofrequency (SRF) cavity application using transmission electron microscopy (TEM). Epitaxial growth of Nb3Sn on the Nb substrate is found and four types of orientation relationships at the Nb3Sn/Nb interface are identified by electron diffraction or high-resolution scanning transmission electron microscopy (STEM) analysis. Thin Nb3Sn grains are observed in regions with low Sn flux and they have the specific orientation relationship, Nb3Sn (1-20)//Nb (-111) and Nb3Sn (002)//Nb (0-11). The Nb3Sn/Nb interface of thin grains had a large lattice mismatch, 12.3 at.%, and a high density of misfit dislocations was observed by HR-STEM. Based on our microstructural analysis of the thin grains, we conclude that the thin regions are probably a result of a slow interfacial reaction with this particular orientation relationship at the interface. The Sn-deficient regions are seen to form initially at the Nb3Sn/Nb interface and remain in the grains due to the slow diffusion of Sn in bulk Nb3Sn. The formation of Sn-deficient regions and the effects of strain and interfacial energies on the formation of Sn-deficient regions at various interfaces were also estimated by first-principle calculation. The finding of orientation relationships at the Nb3Sn/Nb interface provides important information about the formation of defects in Nb3Sn coatings such as large thin regions, Sn-deficient regions, which are critical to the performance of Nb3Sn superconducting radiofrequency cavities for accelerators.

43 PARTICLE ACCELERATORS↗