Search NASA⌕ Search

SEARCH · Search NASA

Results for “interfacial structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe 2-x V x (PO 4 )(SO 4 ) 2

Sodium (Na) super ionic conductor (NASICON) polyanionic compounds have recently attracted much attention from the battery community because of their electroactive properties and reasonably high ionic conductivities, leading to their use as a cathode in sodium-ion batteries. This article describes the compositional optimizations, crystallographic evaluations, and electrochemical behavior of a new mixed NASICON polyanionic compound, NaFe 2-x V x (PO 4 )(SO 4 ) 2 . By doping the characteristic Fe 3+ sites of the FeO 6 octahedrons with varying amounts of V 3+ , the electrochemical stability and charge transport in NaFe 2 (PO 4 )(SO 4 ) 2 were enhanced. The resulting best composition, with crystal structure NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 resolved through the Rietveld method, exhibited a stable capacity compared with the other synthesized compositions. In situ powder x-ray diffraction measurements, a single-phase intercalation/deintercalation mechanism of the NASICON structure in the measured sodium concentration window was observed with no impurity phase formation. Further electrochemical assessments revealed the interfacial charge transfer kinetics to be the rate-limiting step in the sodium concentration window. Also, the measured sodium-ion diffusivity values in the range of 6 × 10 -11 to 7 × 10 -11 cm 2 /s in the measured sodium concentration range. The results reported here highlight the potential of compositionally and morphologically optimized NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 with higher particle surface areas as a cathode material for high-performance sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2019

Probing Structural Reconstruction of Metal Nanoparticles under Annealing and Water Vapor Conditions: A Theoretical Study

Knowing the structural reconstruction of metal nanoparticles (NPs) under working conditions is of great importance to catalytic processes. Here, using Wulff construction combined with density functional theory (DFT) and molecular dynamics (MD) simulation, we investigated truncated octahedron-based Rh and Ir NPs (3.5, 5.5, and 9.5 nm in size) with different morphology for their structural reconstruction under annealing and water vapor conditions. Our MD results show that the NPs with lower average atomic coordination number ($\overline{CN}$) of surface atoms have lowered structural transformation inertness and thermal stability, resulting in more severe structural transition especially for smaller-sized NPs and Ir NPs. Under water vapor conditions, the competition between the interfacial tension ($γ^{\overline{int}}_{hkl}$) of (111) and (110) facets plays a major role in driving the shape evolution of Rh and Ir NPs by minimizing the total surface tension. It is revealed that annealing in vacuum/water vapor condition is an irreversible/reversible process on Rh and Ir NPs. We identified that the total adsorbate–metal ($γ^{\overline{int}}_{hkl}$) can serve as a key stability parameter for describing the potential energy surface of adsorbate–metal NP system in a variable gaseous environment (P, T).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Relaxation and Aging of Nanosphere Assemblies at a Water–Oil Interface

The relaxation and aging of an assembly of spherical nanoparticles (NPs) at a water-oil interface are characterized in situ by grazing incidence X-ray photon correlation spectroscopy. The dynamics of the interfacial assembly is measured while the interface saturates with NPs. Weak attractions between NPs lead to gel-like structures in the assembly, where the in-plane ordering is inhibited by the broad size distribution of the NPs. Structural rearrangements on the length scale of the NP-NP center-to-center distances proceed by intermittent fluctuations instead of continuous cooperative motions. Here, the coexistence of rapid and slow NP populations is confirmed, as commonly observed in soft glass-forming materials. Dynamics are increasingly slowed as the NPs initially segregate to the locally clustered interface. The structural relaxation of the NPs in these localized clusters is 5 orders of magnitude slower than that of free particles in the bulk. When the interface is nearly saturated, the time for relaxation increases suddenly due to the onset of local jamming, and the dynamics slow exponentially afterward until the system reaches collective jamming by cooperative rearrangements. This investigation provides insights into structural relaxations near the glass transition and the evolution of the structure and dynamics of the assemblies as they transition from an isotropic liquid to a dense disordered film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Partial charge transfer and absence of induced magnetization in EuS(111)/Bi 2 Se 3 heterostructures

We report that heterostructures made from topological and magnetic insulators promise to form excellent platforms for new electronic and spintronic functionalities mediated by interfacial effects. We report the results of a first-principles density functional theory study of the geometric, electronic structure, and magnetic properties of the EuS( 111 )/Bi 2 Se 3 interface, including van der Waals and relativistic spin-orbit effects. In contrast to previous theoretical studies, we find no appreciable magnetic anisotropy in such a heterostructure. We also do not see additional induced magnetization at the interface or the magnetic proximity effect on the topological states. This is due to the localized nature of Eu moments and because of a partial charge transfer of ~ 0.5 electron from Eu to Se. The formation of the surface dipole shifts the Dirac cone about 0.4 eV below the chemical potential, and the associated electrostatic screening moves the topological state from the first to the second quintuple layer of Bi 2 Se 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

A New Perspective of Post-Weld Baking Effect on Al-Steel Resistance Spot Weld Properties through Machine Learning and Finite Element Modeling

The root cause of post-weld baking on the mechanical performance of Al-steel dissimilar resistance spot welds (RSWs) has been determined by machine learning (ML) and finite element modeling (FEM) in this study. A deep neural network (DNN) model was constructed to associate the spot weld performance with the joint attributes, stacking materials, and other conditions, using a comprehensive experimental dataset. The DNN model positively identified that the post-weld baking reduces the joint performance, and the extent of degradation depends on the thickness of stacking materials. A three-dimensional finite element (FE) model was then used to investigate the root cause and the mechanism of the baking effect. It revealed that the formation of high thermal stresses during baking, from the mismatch of thermal expansion between steel and Al alloy, causes damage and cracking of the brittle intermetallic compound (IMC) formed at the interface of the weld nugget during welding. This in turn reduces the joint performance by promoting undesirable interfacial fracture when the welds were subjected to externally applied loads. The FEM model further revealed that increase in structural stiffness, because of increase in steel sheet thickness, reduces the thermal stresses at the interface caused by the thermal expansion mismatch and consequently lessens the detrimental effect of post-weld baking on the joint performance.

36 MATERIALS SCIENCE↗
NASA NTRS2013

High-Pressure Lightweight Thrusters

Returning samples of Martian soil and rock to Earth is of great interest to scientists. There were numerous studies to evaluate Mars Sample Return (MSR) mission architectures, technology needs, development plans, and requirements. The largest propulsion risk element of the MSR mission is the Mars Ascent Vehicle (MAV). Along with the baseline solid-propellant vehicle, liquid propellants have been considered. Similar requirements apply to other lander ascent engines and reaction control systems. The performance of current state-ofthe- art liquid propellant engines can be significantly improved by increasing both combustion temperature and pressure. Pump-fed propulsion is suggested for a single-stage bipropellant MAV. Achieving a 90-percent stage propellant fraction is thought to be possible on a 100-kg scale, including sufficient thrust for lifting off Mars. To increase the performance of storable bipropellant rocket engines, a high-pressure, lightweight combustion chamber was designed. Iridium liner electrodeposition was investigated on complex-shaped thrust chamber mandrels. Dense, uniform iridium liners were produced on chamber and cylindrical mandrels. Carbon/carbon composite (C/C) structures were braided over iridium-lined mandrels and densified by chemical vapor infiltration. Niobium deposition was evaluated for forming a metallic attachment flange on the carbon/ carbon structure. The new thrust chamber was designed to exceed state-of-the-art performance, and was manufactured with an 83-percent weight savings. High-performance C/Cs possess a unique set of properties that make them desirable materials for high-temperature structures used in rocket propulsion components, hypersonic vehicles, and aircraft brakes. In particular, more attention is focused on 3D braided C/Cs due to their mesh-work structure. Research on the properties of C/Cs has shown that the strength of composites is strongly affected by the fiber-matrix interfacial bonding, and that weakening interface realizes pseudo-plastic behavior with significant increase in the tensile strength. The investigation of high-temperature strength of C/Cs under high-rate heating (critical for thrust chambers) shows that tensile and compression strength increases from 70 MPa at room temperature to 110 MPa at 1,773 K, and up to 125 MPa at 2,473 K. Despite these unique properties, the use of C/Cs is limited by its high oxidation rate at elevated temperatures. Lining carbon/carbon chambers with a thin layer of iridium or iridium and rhenium is an innovative way to use proven refractory metals and provide the oxidation barrier necessary to enable the use of carbon/ carbon composites. Due to the lower density of C/Cs as compared to SiC/SiC composites, an iridium liner can be added to the C/C structure and still be below the overall thruster weight. Weight calculations show that C/C, C/C with 50 microns of Ir, and C/C with 100 microns of Ir are of less weight than alternative materials for the same construction.

Holmes, Richard↗
DOE OSTI2021

The impact of surface composition on the interfacial energetics and photoelectrochemical properties of BiVO{sub 4}.

The ability to engineer a photoelectrode surface is pivotal for optimizing the properties of any photoelectrode used for solar fuel production. Altering crystal facets exposed on the surface of photoelectrodes has been a major strategy to modify their surface structure. However, there exist numerous ways to terminate the surface even for the same facet, which can considerably alter the photoelectrode properties. Here we report tightly integrated experimental and computational investigations of epitaxial BiVO4 photoelectrodes with vanadium- and bismuth-rich (010) facets. Our study demonstrates that even for the same facet the surface Bi:V ratio has a remarkable impact on the interfacial energetics and photoelectrochemical properties. We also elucidate the microscopic origins of how the surface composition can affect the photoelectrochemical properties. This study opens an unexplored path for understanding and engineering surface energetics via tuning the surface termination/composition of multinary oxide photoelectrodes.

Lee, Dongho↗
NASA NTRS1976

The metal to metal interface and its effect on adhesion and friction

The paper considers the interface between two bulk metals and the effect of this interface on adhesive bonding, resistance to tangential displacements, friction and the interfacial transport from one surface to another. Using Auger emission spectroscopy, field ion microscopy, and low energy electron diffraction techniques, the influence of surface orientation, lattice registry, crystal lattice structure and defects, metal surface chemistry and alloying on the characteristics of the interface was studied for noble, platinum, transition, and Group 4B metals. With dissimilar metals in contact, epitaxial transfer of the cohesively weaker to the cohesively stronger metal has been observed. Surface chemical activity of the noble and platinum metals is shown to affect interfacial behavior as does a valence bonding in the transition metals, and the degree of metallic nature in the Group 4B elements. Alloying elements, e.g., Si and Fe, can alter interfacial behavior by segregation to the surface of metals or by altering bulk properties such as crystal transformation kinetics.

Buckley, D. H.↗
DOE OSTI2018

RGO/BaFe12O19/Fe3O4 nanocomposite as microwave absorbent with lamellar structures and improved polarization interfaces

Highlights: • RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} nanocomposite are prepared via a two-step solvothermal method. • The maximum reflection loss can reach −46.04 dB, and the effective absorption bandwidth under −10 dB is 5.68 GHz. • Interfacial polarization as one of the mechanism for the enhanced absorption properties was detailedly analyzed. - Abstract: In this paper, we designed and prepared a composite of BaFe{sub 12}O{sub 19} (BFO) flakes, two-dimensional graphene and Fe{sub 3}O{sub 4} nanoparticles using a two-step solvothermal method. The combination of BFO flakes and two-dimensional graphene could effectively enhance the heterointerface and is believed to be favorable to enhance the interface polarization. The introduction of inverse spinel Fe{sub 3}O{sub 4} as the third phase could increase the saturated magnetization. The phase structure, morphology, magnetic properties and electromagnetic wave absorption performance of the as-prepared samples were characterized. Due to the enhanced interfacial polarization between the BaFe{sub 12}O{sub 19} flakes and graphene, the composite of RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} exhibits excellent microwave absorption properties. The maximum reflection loss can reach -46.04 dB at 15.6 GHz with a thickness of 1.8 mm, and the effective absorption bandwidth reaches 5.68 GHz (from 11.60 GHz to 17.28 GHz). It is believed that the RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} composites can find potential application in the field of microwave absorption due to their excellent absorption properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Intrinsic exchange bias from interfacial reconstruction in an epitaxial Ni x Co y Fe 3– x – y O 4 (111)/α-Al 2 O 3 (0001) thin film family

Intrinsic exchange bias is known as the unidirectional exchange anisotropy that emerges in a nominally single-component ferro-(ferri-)magnetic system. In this work, with magnetic and structural characterizations, we demonstrate that intrinsic exchange bias is a general phenomenon in (Ni, Co, Fe)-based spinel oxide films deposited on α-Al 2 O 3 (0001) substrates, due to the emergence of a rock-salt interfacial layer consisting of antiferromagnetic CoO from interfacial reconstruction. We show that in Ni x Co y Fe 3–x–y O 4 (111)/α-Al 2 O 3 (0001) films, intrinsic exchange bias and interfacial reconstruction have consistent dependences on Co concentration y, while the Ni and Fe concentration appears to be less important. This work establishes a family of intrinsic exchange bias materials with great tunability by stoichiometry and highlights the strategy of interface engineering in controlling material functionalities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Quantifying the Impact of Electric Fields on the Local Structure and Migration of Potassium Ions at the Orthoclase (001) Surface

Developing an understanding of the response of mineral/water interfaces to applied electric fields is central to detecting and interpreting signatures of interfacial processes in the subsurface. Here we focus density functional theory calculations on understanding K + cation binding and diffusion across the (001) surface of orthoclase feldspar under various applied electric fields with and without surface hydration. The calculations reveal how water ligands labilize surface K + cations for diffusion while also increasing their sensitivity to electric field effects on the binding energy at different surface sites. The calculations also show how the direction and strength of the electric field systematically affect surface cation mobility, sorption, and hydration behavior. Specifically, electric fields directed toward the surface increase the potassium binding energies, facilitate K + diffusion across multiple binding sites, and increase the propensity of surface K + ions to lose their hydration shells. Furthermore, the findings help fill a major knowledge gap into the impact of electric fields on mineral/water interface structure and dynamics more generally, featuring in this case a commonly found type of feldspar involved in a multitude of atmospheric and geochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Detecting impurity-specific effects on structure and radiolytic hydrogen production in aluminum hydroxide

While radiolytic hydrogen (H 2 ) generation is an intrinsic property of aqueous and mineral radiolysis in nuclear waste systems, detection of the sub-ns events leading to H 2 generation is challenging. Interfacial processes involving key mineral phases in the sludge, e.g., gibbsite (α-Al(OH) 3 ), have been implicated, with impurities affecting the amount of H 2 generated. To understand why gibbsite synthesized from nitrate precursors produces less H 2 than gibbsite from chloride precursors, we paired 27 Al multiple quantum magic angle spinning (MQMAS) NMR spectroscopy to determine structural heterogeneity with transverse-field muon spin rotation (TF-μSR) to probe electron availability. MQMAS revealed greater structural disorder in the gibbsite synthesized with nitrate (NO 3 -gibbsite). Correspondingly, TF-μSR showed a larger diamagnetic fraction for NO 3 -gibbsite, indicating reduced persistence of μ + -electron bound states (muonium or other radicals) and thus fewer electrons available for reaction on the sub-ns timescale. This establishes a correlation between impurity-induced disorder and electron loss. The diamagnetic fraction serves as a signature for these sub-ns events, as it provides a key constraint for predictive models without currently resolving whether the electron is lost to direct chemical scavenging or trapping at lattice defects.

Graham, Trent R. [Pacific Northwest National Labor↗
NASA NTRS2004

Method for determining the three-dimensional structure of a protein

Microcapsules prepared by encapsulating an aqueous solution of a protein, drug or other bioactive substance inside a semi-permeable membrane by are disclosed. The microcapsules are formed by interfacial coacervation under conditions where the shear forces are limited to 0-100 dynes/cm.sup.2 at the interface. By placing the microcapsules in a high osmotic dewatering solution, the protein solution is gradually made saturated and then supersaturated, and the controlled nucleation and crystallization of the protein is achieved. The crystal-filled microcapsules prepared by this method can be conveniently harvested and stored while keeping the encapsulated crystals in essentially pristine condition due to the rugged, protective membrane. Because the membrane components themselves are x-ray transparent, large crystal-containing microcapsules can be individually selected, mounted in x-ray capillary tubes and subjected to high energy x-ray diffraction studies to determine the 3-D structure of the protein molecules. Certain embodiments of the microcapsules of the invention have composite polymeric outer membranes which are somewhat elastic, water insoluble, permeable only to water, salts, and low molecular weight molecules and are structurally stable in fluid shear forces typically encountered in the human vascular system.

Morrison, Dennis R.↗
DOE OSTI2025

Weakly solvating electrolytes: a solvation-centric paradigm for rechargeable metal batteries

Electrolyte design has long followed a solvation-first paradigm that prioritizes solvents capable of maximizing salt dissociation and ionic conductivity, while treating interfacial degradation and rheological limitations as secondary constraints. Although this approach has enabled significant progress in lithium-ion and sodium-ion batteries, it inherently favors solvent-dominated solvation structures that destabilize reactive metal interfaces. Weakly solvating electrolytes (WSEs) offer a fundamentally different strategy. By using solvents with intrinsically low donor strength and minimal electrostatic affinity for cations, WSEs suppress cation–solvent coordination and promote anion-rich solvation shells without relying on salt superconcentration. This shift lowers desolvation barriers, redirects interfacial decomposition pathways, and supports the formation of inorganic-rich, stable interphases. In this review, we discuss the molecular and solvation criteria that distinguish WSEs from conventional and concentrated or locally concentrated electrolyte systems, examine their implementation across different chemistries, and identify unresolved design challenges. WSEs are presented not as a niche formulation, but as a solvation-centric framework for rethinking electrolyte function in metal battery technologies.

Karbak, Mehdi [Pacific Northwest National Laborato↗
DOE OSTI2018

Supramolecular Assemblies on Surfaces: Nanopatterning, Functionality, and Reactivity

Understanding how molecules interact to form large-scale hierarchical structures on surfaces holds promise for building designer nanoscale constructs with defined chemical and physical properties. Here, we describe early advances in this field and highlight upcoming opportunities and challenges. Both direct intermolecular interactions and those that are mediated by coordinated metal centers or substrates are discussed. These interactions can be additive, but they can also interfere with each other, leading to new assemblies in which electrical potentials vary at distances much larger than those of typical chemical interactions. Earlier spectroscopic and surface measurements have provided partial information on such interfacial effects. In the interim, scanning probe microscopies have assumed defining roles in the field of molecular organization on surfaces, delivering deeper understanding of interactions, structures, and local potentials. Furthermore, self-assembly is a key strategy to form extended structures on surfaces, advancing nanolithography into the chemical dimension and providing simultaneous control at multiple scales. In parallel, the emergence of graphene and the resulting impetus to explore 2D materials have broadened the field, as surface-confined reactions of molecular building blocks provide access to such materials as 2D polymers and graphene nanoribbons. In this Review, we describe recent advances and point out promising directions that will lead to even greater and more robust capabilities to exploit designer surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

High valent lithiated surface structures for lithium ion battery electrode materials

The surface of a lithium ion cathode material (e.g., a lithium metal oxide material capable of releasing and accepting lithium ions during charging and discharging, respectively, of a lithium ion electrochemical cell) is coated with a lithium metal oxide (LMO) material comprising a high-valent metal to, inter alia, reduce interfacial resistance toward lithium exchange. Li-rich phases on the surface of the treated LMO particles allow for better lithium ion diffusion. The inclusion of elements that form phases with lithium and can substitute in the host structure allow for mixing across interfaces leading to more robust structures that better mimic epitaxial-type layers. Inclusion of doping elements in place of some of the high-valent metal in the surface-treating composition provides unexpectedly improved performance over surface treatments comprising lithium metal oxides that only include a high-valent metal.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mesocrystal growth through oriented sliding and attachment of nanoplates

Oriented attachment is a critical, yet poorly understood, crystal growth pathway based on the self-assembly of nanocrystals. During oriented attachment, solvent-separated particles align and coalesce through forces that enable precise rotation and translation. While prior studies emphasized intragap forces driving crystallographic alignment, the forces enabling uniform stacking and superlattice formation remain unclear. Here, we demonstrate how macroscopic gibbsite mesocrystals emerge from nanoplates guided into staggered positions by directional sliding. Electron microscopy and X-ray scattering reveal the monoclinic superlattice structure, based on nanoplate stacking with a uniform ≈50° stagger along the gibbsite [010] direction. In situ liquid-cell TEM captures preferential sliding along the gibbsite [010] direction, decelerating with increasing particle overlap. Molecular dynamics simulations reveal that this staggered arrangement corresponds to a global free-energy minimum, rather than full alignment. The simulations also confirm that sliding along the [010] direction is energetically favored and provide insight into the role of interfacial water in achieving long-range ordered assemblies. These insights highlight the energy landscape’s role in oriented attachment, with implications for material synthesis and hierarchical structures in nature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Genetic control of morphological transitions in a coacervating protein template

Nature routinely exploits liquid–liquid phase separation (LLPS) of proteins to control the assembly and mineralization of hybrid materials. Here, we show that fusion of the Car9 silica-binding peptide to an elastin-like polypeptide (ELP) yields temperature- and sequence-programmable soft matter templates for the synthesis of silicified architectures ranging in size from nanometers to micrometers. Specifically, we demonstrate unprecedented control over the diameter of silica nanoparticles (SiNP) in the 30–60 nm range with 4 nm precision, show that a single arginine residue (R4) in the Car9 sequence underpins the transition from micelles to proteinosomes, and find that substitutions in other basic residues modulate electrostatic repulsion and solvation to enable access to kinetically trapped species. These structures, which include interconnected micelles, small (∼200 nm) and large (>5 µm) vesicles, are readily visualized by SEM imaging following silicification. Molecular dynamics (MD) simulations and AlphaFold predictions reveal that mutations in positively charged residues alter interfacial packing, hydration, and conformational freedom of the silica-binding segments. Overall, our results establish sequence and thermal energy as synergistic levers for morphological control across length scales using solid-binding ELPs and establish mineralization as a powerful tool to visualize the structure of dynamic soft matter assemblies.

hierarchy↗