Search NASA⌕ Search

SEARCH · Search NASA

Results for “intermediates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Cost-Effectiveness of Primary Radiation Therapy Versus Radical Prostatectomy for Intermediate- to High-Risk Prostate Cancer

To compare, using a cost-effectiveness analysis, the quality-adjusted life expectancy (QALE) and cost between the 2 treatment options for intermediate- to high-risk prostate cancer: (1) radiation (RT) with androgen deprivation therapy (ADT) or (2) radical prostatectomy (RP) followed by adjuvant RT for patients with risk factors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Biochemical Control and Toxicity Outcomes of Stereotactic Body Radiation Therapy Versus Low-Dose-Rate Brachytherapy in the Treatment of Low- and Intermediate-Risk Prostate Cancer

Low-dose-rate (LDR) brachytherapy and stereotactic body radiation therapy (SBRT) have both shown acceptable outcomes in the treatment of low- and intermediate-risk prostate cancer. Minimal data have been published directly comparing rates of biochemical control and toxicity with these 2 modalities. We hypothesize that LDR and SBRT will provide similar rates of biochemical control.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Combination of Radiation Therapy and Short-Term Androgen Blockade With Abiraterone Acetate Plus Prednisone for Men With High- and Intermediate-Risk Localized Prostate Cancer

Long-term androgen-deprivation therapy (ADT) is the standard of care in combination with radiation therapy (RT) in high-risk prostate cancer (PC), despite substantial toxicity from the resulting hypogonadism. We hypothesized that a combination of more potent but shorter-term androgen inhibition in men with intermediate- or high-risk localized PC would synergize with definitive RT to provide short-term testosterone recovery and improve disease control.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Fission yeast Duf89 and Duf8901 are cobalt/nickel-dependent phosphatase–pyrophosphatases that act via a covalent aspartyl–phosphate intermediate

Domain of Unknown Function 89 (DUF89) proteins are metal-dependent phosphohydrolases. Exemplary DUF89 enzymes differ in their metal and phosphosubstrate preferences. Here, we interrogated the activities and structures of two DUF89 paralogs from fission yeast—Duf89 and Duf8901. We find that Duf89 and Duf8901 are cobalt/nickel-dependent phosphohydrolases adept at hydrolyzing p-nitrophenylphosphate and PP i . Crystal structures of metal-free Duf89 and Co 2+ -bound Duf8901 disclosed two enzyme conformations that differed with respect to the position of a three-helix module, which is either oriented away from the active site in Duf89 or forms a lid over the active site in Duf8901. Lid closure results in a 16 Å movement of Duf8901 Asp195, vis-à-vis Asp199 in Duf89, that brings Asp195 into contact with an octahedrally coordinated cobalt. Reaction of Duf8901 with BeCl 2 and NaF in the presence of divalent cations Co 2+ , Ni 2+ , or Zn 2+ generated covalent Duf8901-(Asp248)–beryllium trifluoride (BeF 3 )•Co 2+ , Duf8901-(Asp248)–BeF 3 •Ni 2+ , or Duf8901-(Asp248)–BeF 3 •Zn 2+ adducts, the structures of which suggest a two-step catalytic mechanism via formation and hydrolysis of an enzyme-(aspartyl)–phosphate intermediate. Alanine mutations of Duf8901 Asp248, Asn249, Lys401, Asp286, and Asp195 that interact with BeF 3 •Co 2+ squelched p-nitrophenylphosphatase activity. A 1.8 Å structure of a Duf8901-(Asp248)–AlF 4 –OH 2 •Co 2+ transition-state mimetic suggests an associative mechanism in which Asp195 and Asp363 orient and activate the water nucleophile. Whereas deletion of the duf89 gene elicited a phenotype in which expression of phosphate homeostasis gene pho1 was derepressed, deleting duf8901 did not, thereby hinting that the DUF89 paralogs have distinct functional repertoires in vivo.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An in-situ electrochemical IR investigation of solution CO electro-oxidation on a polycrystalline Au surface in an alkaline electrolyte: Identification of active reaction intermediates

Here we report an in-situ electrochemical surface enhanced IR reflection absorption spectroscopic (SEIRAS) study of carbon monoxide electro-oxidation reaction (COR) of CO dissolved in alkaline supporting electrolyte (CO sol ). With judiciously chosen concentration of OH - , we were able to observe for the first time the vibrational band of the weakly adsorbed CO w in an alkaline solution and identify it as the active reaction intermediate for the COR of CO sol , as in the acidic media. With the help of deuterium labeling, we were also able to confirm spectroscopically, again for the first time, the previously proposed CO-adsorption-promoted-OH-adsorption hypothesis. We proposed a reaction mechanism accordingly that consists of (1) CO-adsorption-promoted OH adsorption, (2) formation of weakly-bound CO w from CO sol , and (3) the oxidation of CO w by a surface-anchored weakly-hydrogen-bound species. We believe that the synergistic actions of these elemental chemical processes are the reasons for the observed unusually high activity of COR of CO sol in an alkaline solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dependence of short and intermediate-range order on preparation in experimental and modeled pure a-Si

Variability in the short-to-intermediate range order of pure amorphous silicon prepared by different experimental and computational techniques is probed by measuring mass density, atomic coordination, bond-angle deviation, and dihedral angle deviation. It is found that there is significant variability in order parameters at these length scales in this archetypal covalently bonded, monoatomic system. This diversity strongly reflects preparation technique and thermal history in both experimental and simulated systems. Experiment and simulation do not fully quantitatively agree, partly due to differences in the way parameters are accessed. However, qualitative agreement in the trends is identified. Relaxed forms of amorphous silicon closely resemble continuous random networks generated by a hybrid method of bond-switching Monte Carlo and molecular dynamics simulation. As-prepared ion implanted amorphous silicon can be adequately modeled using a structure generated from amorphization via ion bombardement using energetic recoils. Preparation methods which narrowly avoid crystallization such as experimental pressure-induced amorphization or simulated melt-quenching result in inhomogeneous structures that contain regions with significant variations in atomic ordering. Ad hoc simulated structures containing small (1 nm) diamond cubic crystal inclusions were found to possess relatively high bond-angle deviations and low dihedral angle deviations, a trend that could not be reconciled with any experimental material.

36 MATERIALS SCIENCE↗

Synthesis and characterization of super occluded LiCl-KCl in zeolite-4A as a chloride salt waste form intermediate

Here, this paper reports the hygroscopic properties of eutectic LiCl-KCl after absorption into zeolite-4A, up to salt loadings of 75 wt%. Samples of the salt occluded zeolite were hydrated in a humidity chamber at constant temperature and relative humidity for up to 100 h. At up to 45 wt% salt loading, the un-occluded phase of salt consisted primarily of NaCl, which forms when the Na + ions present in the zeolite framework exchange with Li + and K + ions from the eutectic LiCl-KCl. This results in minimal water absorption and corrosion of contacted stainless steel. At greater than 45 wt% salt loading, water absorption and corrosion progressively worsened. The mixture has a significant amount of excess LiCl-KCl, making it highly hygroscopic. This study reveals an option for the intermediate treatment of waste salt from spent nuclear fuel electrorefiners that could facilitate it to be stored in a non-inert atmosphere for extended periods of time before final conversion into a permanent waste form.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Intermediate-temperature Polymorphic Phase Transition in KH2PO4: A Synchrotron X-ray Diffraction Study

We have used synchrotron X-ray diffraction to investigate the structural and chemical changes undergone by polycrystalline KH{sub 2}PO{sub 4} (KDP) upon heating within the 30-250 C temperature interval. Our data show evidence of a polymorphic transition at T {approx} 190 C from the room-temperature tetragonal KDP phase to a new intermediate-temperature monoclinic KDP modification (spacegroup P2{sub 1}/m and lattice parameters a = 7.590, b = 6.209, c = 4.530 {angstrom}, and {beta} = 107.36{sup o}). The monoclinic RDP polymorph remains stable upon further heating to 235 C, and is isomorphic to its RbH{sub 2}PO{sub 4} and CsH{sub 2}PO{sub 4} counterparts.

36 MATERIALS SCIENCE↗

Nanostructured carbon electrocatalyst supports for intermediate-temperature fuel cells: Single-walled versus multi-walled structures

It is unknown if nanostructured carbons possess the requisite electrochemical stability to be used as catalyst supports in the cathode of intermediate-temperature solid acid fuel cells (SAFCs) based on the CsH2PO4 electrolyte. To investigate this application, single-walled carbon nanohorns (SWNHs) and multi-walled carbon nanotubes (MWNTs) were used as supports for Pt catalysts in SAFCs operating at 250 °C. SWNH-based cathodes display greater maximum activity than their MWNT-based counterparts at a cell voltage of 0.8 V, but are unstable in the SAFC cathode as a consequence of electrochemical carbon corrosion. MWNT-based cells are resistant to this effect and capable of operation for at least 160 h at 0.6 V and 250 °C. Cells fabricated with nanostructured carbon supports are more active (52 mA cm -1 vs. 28 mA cm -1 at 0.8 V) than state-of-the-art carbon-free formulations while simultaneously displaying enhanced Pt utilization (40 mA mgPt -1 vs. 16 mA mgPt -1 at 0.8 V). Finally, these results suggest that MWNTs are a viable support material for developing stable, high-performance, low-cost air electrodes for solid-state electrochemical devices operating above 230 °C.

25 ENERGY STORAGE↗

Electrochemical performance and stability of SrTi 0.3 Fe 0.6 Co 0.1 O 3-δ infiltrated La 0.8 Sr 0.2 MnO 3 Zr 0.92 Y 0.16 O 2-δ oxygen electrodes for intermediate-temperature solid oxide electrochemical cells

We report that the La 0.8 Sr 0.2 MnO 3 -Zr 0.92 Y 0.16 O 2-δ (LSM-YSZ) composite is the most widely used oxygen electrode for solid oxide electrochemical cells (SOCs). However, operating temperatures > 700 degrees C are required for good performance since oxygen reactions are limitied to three-phase boundaries (TPBs) because of poor ionic conductivity of LSM. Furthermore, LSM-YSZ electrodes typically delaminate during electrolysis operation leading to cell degradation. One strategy to improve SOCs with LSM-YSZ electrodes is to infiltrate a mixed ionically and electronically conducting (MIEC) material that promotes oxygen exchange. However, infiltrated materials have a nano-scale structure that may not be stable under SOC operating temperatures. Here, we report results on the infiltration of SrTi 0.3 Fe 0.6 Co 0.1 O 3-δ (STFC), a recently reported high performance MIEC, into LSM-YSZ to improve its electrochemical performance and stability at intermediate temperatures. The infiltrated STFC enhances LSM-YSZ and cell performance, typically yielding a decrease in electrode polarization resistance by a factor > 3 times, resulting in an increase in fuel cell maximum power density and electrolysis current density (at 1.3 V) by a factor > 2 times. Perhaps more significantly, the infiltrated electrodes show good performance stability, with suppression of electrode delamination during electrolysis and no evidence of coarsening or segregation induced degradation.

36 MATERIALS SCIENCE↗

Phase equilibrium and intermediate phases in the Eu-Sb system

Rapid heating rate thermal analysis, X-ray diffraction, fluorescence spectrometry, and differential dissolution method were used to study the high-temperature phase equilibrium in the Eu-Sb system within the composition range between 37 and 96 at% Sb. The techniques were effective in determination of the vapor-solid-liquid equilibrium since intermediate phases except Eu{sub 4}Sb{sub 3} evaporated incongruently after melting. A thermal procedure was developed to determine the liquidus and solidus lines of the T-x diagram. Six stable phases were identified: two phases, EuSb{sub 2} and Eu{sub 4}Sb{sub 3}, melt congruently at 1045{+-}10 deg. C and 1600{+-}15 deg. C, the Eu{sub 2}Sb{sub 3}, Eu{sub 11}Sb{sub 10}, Eu{sub 5}Sb{sub 4}, and Eu{sub 5}Sb{sub 3} phases melt incongruently at 850{+-}8 deg. C, 950{+-}10 deg. C, 1350{+-}15 deg. C, and 1445{+-}15 deg. C, respectively. The exact composition shifting of Sb-rich decomposable phases towards Eu{sub 4}Sb{sub 3}, the most refractory compound, was determined. The topology of the Eu-Sb phase diagram was considered together with that of the Yb-Sb system. - Graphical abstract: The high-temperature range of the T-x phase diagram for the Eu-Sb system. Highlights: > The phase relations in the Eu-Sb system were studied over a large composition and temperature scale. > The liquidus and solidus lines of the T-x diagram were well established using effective techniques. > In the system, six binary phases are stable and they melt incongruently except EuSb{sub 2} and Eu{sub 4}Sb{sub 3}. > Incongruent evaporation was found to be typical of all the phases besides Eu{sub 4}Sb{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure and chemical bonding of {alpha}- and {beta}-CeIr{sub 2}Si{sub 2} intermediate valence compounds

The dimorphism of the intermediate valence ternary cerium silicide CeIr{sub 2}Si{sub 2} in the ThCr{sub 2}Si{sub 2} ({alpha}) and CaBe{sub 2}Ge{sub 2} ({beta}) modifications is addressed in the framework of the density functional theory. The geometry optimization is in good agreement with the experiment and the subsequent establishment of the energy-volume equation of state (EOS) indicates a stabilization of the {beta}-type relative to the {alpha}-type concomitant with the trend of the cerium valence, changing to tetravalent in {beta}-CeIr{sub 2}Si{sub 2}. This is equally shown from the site projected DOS and from the large increase of the electronic contribution to the specific heat. The chemical bonding indicates the strongest bonding interactions within the Ir-Si substructure in both varieties. Stabilization of {beta}-CeIr{sub 2}Si{sub 2} with almost tetravalent cerium is in good agreement with Th{sup IV}Ir{sub 2}Si{sub 2} which exclusively crystallizes in the CaBe{sub 2}Ge{sub 2} type. The EOS behavior of different RIr{sub 2}Si{sub 2} (R=Th, Ce, La) is comparatively discussed. - Graphical abstract: The crystal structures of {alpha}- and {beta}-CeIr{sub 2}Si{sub 2}. Relevant interatomic distances (A), the three-dimensional [Ir{sub 2}Si{sub 2}] networks and the crystallographically independent iridium and silicon sites are indicated. Highlights: Black-Right-Pointing-Pointer Energy stabilization of (HT) {beta}-CeIr{sub 2}Si{sub 2} versus (LT) {alpha}-CeIr{sub 2}Si{sub 2} from DFT methods. Black-Right-Pointing-Pointer Concomitant with the change of Ce valence to tetravalent (HT)-enhanced specific heat. Black-Right-Pointing-Pointer Equations of states for La, Ce and Th members with CeIr{sub 2}Si{sub 2} resembling tetravalent-Th. Black-Right-Pointing-Pointer Chemical bonding shows changes on the {l_brace}Ir{sub 2}Si{sub 2}{r_brace} intralayer and Ce{sup IV}-Ir bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase equilibria, crystal structure and oxygen content of intermediate phases in the Y–Ba–Co–O system

The phase equilibria in the Y–Ba–Co–O system were systematically studied at 1373 K in air. The intermediate phases formed in the Y–Ba–Co–O system at 1373 K in air were: YBaCo₂O 5+δ , YBaCo₄O₇ and BaCo 1–y Y y O 3–δ (0.09≤y≤0.42). It was shown that YBaCo₂O 5+δ possesses tetragonal structure with the 3aₚ×3aₚ×2aₚ superstructure (sp. gr. P4/mmm). High-temperature X-ray diffraction analysis of the YBaCo₂O 5+δ in the temperature range from 298 K up to 1073 K under Po₂=0.21 atm has not shown any phase transformations. The value of oxygen content for the YBaCo₂O 5+δ at room temperature was estimated as 5.40 and at 1323 K it was equal to 5.04. Thermal expansion of sample shows a linear characteristics and the average thermal expansion coefficient (TEC) is about 13.8×10⁻⁶, K⁻¹ in the temperature range 298–1273 K. The homogeneity range and crystal structure of the BaCo 1–y Y y O 3–δ (0.09≤y≤0.42) solid solutions were determined by X-ray diffraction of quenched samples. All BaCo 1–y Y y O 3–δ solid solutions were found to have cubic structure (sp. gr. Pm3m). The unit cell parameters were refined using Rietveld full-profile analysis. Oxygen nonstoichiometry of BaCo 1–y Y y O 3–δ solid solutions with 0.1≤y≤0.4 was measured by means of thermogravimetric technique within the temperature range 298–1373 K in air. Thermal expansion of BaCo 1–y Y y O 3–δ (y=0.0; 0.1; 0.2; 0.3) samples was studied within the temperature range 298–1200 K in air. The projection of isothermal–isobaric phase diagram for the Y–Ba–Co–O system to the compositional triangle of metallic components was presented. - Graphical abstract: A projection of isobaric isothermal phase diagram of the Y–Ba–Co–O system to the metallic components triangle (T=1373 K, Po₂=0.21 atm). Highlights: • High-temperature X-ray diffraction analyses of the YBaCo₂O 5+δ in the temperature range 298–1073 K. • The value of oxygen content for the YBaCo₂O 5+δ in the temperature range 298 –1323 K. • The homogeneity range and crystal structure of the BaCo 1–y Y y O 3–δ (0.09≤y≤0.42) solid solutions. • Oxygen nonstoichiometry of BaCo 1–y Y y O 3–δ solid solutions. • The projection of isothermal–isobaric phase diagram for the Y–Ba–Co–O system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of La{sub 0.6}Sr{sub 0.4}Fe{sub 0.8}Cu{sub 0.2}O{sub 3−δ} oxide as cathode for Intermediate Temperature Solid Oxide Fuel Cells

Nanocrystalline La{sub 0.6}Sr{sub 0.4}Fe{sub 0.8}Cu{sub 0.2}O{sub 3−δ} (LSFCu) material was synthetized by combustion method using EDTA as fuel/chelating agent and NH{sub 4}NO{sub 3} as combustion promoter. Structural characterization using thermodiffraction data allowed to determine a reversible phase transition at 425 °C from a low temperature R-3c phase to a high temperature Pm-3m phase and to calculate the thermal expansion coefficient (TEC) of both phases. Important characteristics for cathode application as electronic conductivity and chemical compatibility with Ce{sub 0.9}Gd{sub 0.1}O{sub 2−δ} (CGO) electrolyte were evaluated. LSFCu presented a p-type conductor behavior with maximum conductivity of 135 S cm{sup −1} at 275 °C and showed a good stability with CGO electrolyte at high temperatures. This work confirmed that as prepared LSFCu has excellent microstructural characteristics and an electrical conductivity between 100 and 60 S cm{sup −1} in the 500–700 °C range which is sufficiently high to work as intermediate temperature Solid Oxide Fuel Cells (IT-SOFCs) cathode. However a change in the thermal expansion coefficient consistent with a small oxygen loss process may affect the electrode-electrolyte interface during fabrication and operation of a SOFC. - Graphical abstract: Nanocrystalline La{sub 0.6}Sr{sub 0.4}Fe{sub 0.8}Cu{sub 0.2}O{sub 3−δ} was prepared by gel combustion and characterized by X-ray thermodiffraction and its conductivity was determined. The phase shows a reversible rhombohedral to cubic structural phase transition at 425 °C and a semiconductor to metallic phase transition at 275 °C. - Highlights: • LSFCu was prepared by gel combustion route using EDTA and NH{sub 4}NO{sub 3}. • LSFCu shows a reversible phase transition at 425 °C from R-3c to Pm-3m phase. • The sample has a maximum conductivity value of 135 S cm{sup −1} at 275 °C. • LSFCu shows a good chemical compatibility with CGO at 900 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the phase relations in the U-Al-Ge ternary system: Influence of the Al/Ge substitution on the properties of the intermediate phases

The phase relations within the U-Al-Ge ternary system were studied for two isothermal sections, at 673 K for the whole Gibbs triangle and at 1173 K for the concentration range 25–100 at% U. The identification of the phases, their composition ranges and stability were determined by x-ray powder diffraction, scanning electron microscopy coupled to energy dispersive spectroscopy and differential thermal analysis. The tie-lines and the solubility domains were determined for the U-Ge and U-Al binaries, the UAl{sub 3}-UGe{sub 3} solid-solution and for the unique ternary intermediate phase U{sub 3}Al{sub 2−x}Ge{sub 3+x}. The experimental isopleth section of the pseudo-binary UAl{sub 3}-UGe{sub 3} reveals an isomorphous solid solution based on the Cu{sub 3}Au-type below the solidus. The U{sub 3}Al{sub 2−x}Ge{sub 3+x} solid solution extends for −0.1≤x≤1.35 and −0.2≤x≤1.5 at 673 K and 1173 K respectively. It crystallizes in the I-centered tetragonal symmetry. The reciprocal lattice of several compositions of the U{sub 3}Al{sub 2−x}Ge{sub 3+x} solid solution was examined by electron diffraction at room temperature, revealing the presence of a c-glide plane. Their crystal structure was refined by single crystal x-ray diffraction suggesting an isomorphous solid solution best described with the non-centrosymmetric space group I4cm in the paramagnetic domain. The magnetic measurements confirm the ferromagnetic ordering of the solid solution U{sub 3}Al{sub 2−x}Ge{sub 3+x} with an increase of Tc with the Al content. The thermal variation of the specific heat bear out the magnetic transitions with some delocalized character of the uranium 5f electrons. - Graphical abstract: The phase relations within the U-Al-Ge ternary system were experimentally assessed for two isothermal sections, at 673 K for the whole Gibbs triangle and at 1173 K for the concentration range 25–100 at% U. A complete UAl{sub 3}-UGe{sub 3} solid-solution based on the Cu{sub 3}Au-type forms below the solidus. A unique ternary phase showing a large homogeneity domain, U{sub 3}Al{sub 2−x}Ge{sub 3+x} for −0.1≤x≤1.35 and −0.2≤x≤1.5 at 673 K and 1173 K respectively has been evidenced. It is best described with the non-centrosymmetric space group I4cm above room temperature. A linear increase of the ferromagnetic ordering is observed with the Al content. - Highlights: • Isothermal sections of the U-Al-Ge system were investigated for 673 K and 1173 K. • An isomorphous solid-solution UAl{sub 3}-UGe{sub 3} forms for the whole composition range. • U{sub 3}Al{sub 2−x}Ge{sub 3+x} the unique ternary phase to form exists for a large homogeneity domain. • U{sub 3}Al{sub 2−x}Ge{sub 3+x} is best described in I4cm space group above room temperature. • The ferromagnetic transition of U{sub 3}Al{sub 2−x}Ge{sub 3+x} linearly increases with the Al content.

36 MATERIALS SCIENCE↗

Investigation of structural and electrochemical properties of LaSrCo{sub 1−x}Sb{sub x}O{sub 4} (0≤x≤0.20) as potential cathode materials in intermediate-temperature solid oxide fuel cells

The structural and electrochemical properties of the layered perovskite oxides LaSrCo{sub 1−x}Sb{sub x}O{sub 4} (0≤x≤0.20) were investigated to study the effects of substituting Sb for Co for application as cathode materials in intermediate temperature solid oxide fuel cells (IT-SOFCs). The results of crystal structure analyses show the maximum content of Sb in LaSrCo{sub 1−x}Sb{sub x}O{sub 4} to be 0.05 as a pure single phase. XPS shows that Co and Sb in LaSrCo{sub 0.95}Sb{sub 0.05}O{sub 4} may possess mixed-oxidation states. The electrical conductivity increased greatly after Sb substitution. An improvement in the cathode polarization (R{sub p}) values is observed from the Sb-doped sample with respect to the undoped samples. For example, R{sub p} of LaSrCo{sub 0.95}Sb{sub 0.05}O{sub 4} on LSGM was observed to be 0.16 Ω cm{sup 2} at 800 °C in air. The main rate-limiting step for LaSrCo{sub 0.95}Sb{sub 0.05}O{sub 4} cathode is charge transfer of oxygen atoms. These results indicate that Sb can be incorporated into LaSrCo{sub 1−x}Sb{sub x}O{sub 4} based materials and can have a beneficial effect on the performance, making them potentially suitable for use as cathode materials in IT-SOFCs. - Graphical abstract: The oxygen partial pressure dependence of polarization resistances for a new layered perovskite cathode LaSrCo{sub 0.95}Sb{sub 0.05}O{sub 4} at various temperatures was measured. - Highlights: • The maximum content of Sb was 0.05 mol in LaSrCo{sub 1−x}Sb{sub x}O{sub 4}. • The maximum electrical conductivity is 194 S cm{sup −1}for LaSrCo{sub 0.95}Sb{sub 0.05}O{sub 4} at 800 °C. • A rate-limiting process of charge transfer presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and properties of Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} perovskite cathode material for intermediate temperature solid-oxide fuel cells

A highly stable perovskite cathode material, Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} (BSCZF) for intermediate temperature solid-oxide fuel cells (IT-SOFCs) was synthesized via the improved EDTA-citric acid complexing technique combined with high-temperature sintering. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectra (EIS) measurements. An electrolyte-supported BSCZF/SDC/Ni-SDC fuel cell was fabricated to evaluate the performance of the material. The XRD study indicates that the sintering temperature higher than 950 deg. C is sufficient to the formation of clean single BSCZF perovskite phase. Due to the incorporation of Zr ions, BSCZF perovskite exhibit lower electrical conductivity with higher activation energy but higher structural stability than the Ba{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3-{delta}} (BSCF) parent oxide. The maximum electrical conductivity of BSCZF attains 16.9 S cm{sup -1} at around 540 deg. C. Impedance spectra showed that the ASRs of BSCZF cathode on samaria doped ceria (Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9}, SDC) electrolyte are low but are still slightly larger than those of BSCF at similar conditions. The BSCZF/SDC/Ni-SDC cell exhibited a stable output with the maximum power densities of 30, 75, 139 and 241 mW cm{sup -2} at 550, 600, 650 and 700 deg. C, respectively. Due to the high electrochemical performances as well as the excellent stability, BSCZF perovskite may be an attractive cathode material for IT-SOFCs.

36 MATERIALS SCIENCE↗

Properties and performance of La{sub 1.6}Sr{sub 0.4}NiO{sub 4+{delta}}-Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9} composite cathodes for intermediate temperature solid oxide fuel cells

La{sub 1.6}Sr{sub 0.4}NiO{sub 4+{delta}}-Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9} composite cathodes were prepared successfully using combustion synthesis method for intermediate temperature solid oxide fuel cells. The chemical compatibility, thermal expansion behavior, electrical conductivity and electrode performance were studied. The X-ray diffraction of La{sub 1.6}Sr{sub 0.4}NiO{sub 4+{delta}}-Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9} composite result proved a slight reaction between La{sub 1.6}Sr{sub 0.4}NiO{sub 4+{delta}} and Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9}. Both the thermal expansion coefficient and the electrical conductivity of La{sub 1.6}Sr{sub 0.4}NiO{sub 4+{delta}}-Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9} decreased with increasing Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9} content. AC impedance spectroscopy measurements indicated that the addition of 30 wt% Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9} to La{sub 1.6}Sr{sub 0.4}NiO{sub 4+{delta}} exhibited the lowest polarization resistance (0.238 {Omega}cm{sup 2}) at 800 deg. C in air, which was only one fourth of the La{sub 1.6}Sr{sub 0.4}NiO{sub 4+{delta}} electrode measured at the same temperature.

36 MATERIALS SCIENCE↗