Search NASA⌕ Search

SEARCH · Search NASA

Results for “multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Tuning magnetization dynamic properties of Fe-SiO{sub 2} multilayers by oblique deposition

The static and dynamic magnetic properties of Fe-SiO{sub 2} multilayers fabricated onto Si(100) substrates by a radio frequency sputter-deposition system are investigated as functions of deposition angle and Fe thickness. By changing the oblique deposition angle, one can effectively tune the ferromagnetic resonance frequency from 1.7 to 3.5 GHz. In addition, the frequency linewidth is significantly changed with the oblique deposition angle when the Fe layer is thick, but it is almost constant in the case of small Fe thickness.

36 MATERIALS SCIENCE↗

Silicon-rich SiO{sub 2}/SiO{sub 2} multilayers: A promising material for the third generation of solar cell

Si-rich-SiO{sub 2}(SRSO)/SiO{sub 2} multilayers (MLs) have been grown by reactive magnetron sputtering. The presence of silicon nanoclusters (Si-ncls) within the SRSO sublayer and annealing temperature influence optical absorption as well as photoluminescence. The optimized annealing temperature has been found to be 1100 deg. C, which allows the recovery of defects and thus enhances photoluminescence. Four MLs with Si-ncl size ranging from 1.5 to 8 nm have been annealed using the optimized conditions and then studied by transmission measurements. Optical absorption has been modeled so that a size effect in the linear absorption coefficient alpha (in cm{sup -1}) has been evidenced and correlated with TEM observations. It is demonstrated that amorphous Si-ncl absorption is fourfold higher than that of crystalline Si-ncls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of film texture on magnetization reversal and switching field in continuous and patterned (Co/Pd) multilayers

We studied the reversal properties of perpendicular anisotropy (Co/Pd) multilayers with different crystallographic textures. In case of continuous films, an increase in the coercivity and reduction in the switching field distribution (SFD) were observed as the growth is improved. From magnetic force microscopy, a stripe-type domain configuration was observed in films deposited at low gas pressure while a bubble-type domain was observed in high pressure deposited films. In patterned films, the SFD did not vary significantly for samples with different textures although a 2 kOe increase in the switching field was measured. In patterned structures, the controllability of SFD may not be related to the improvement of film crystallographic growth as was observed for unpatterned films. The results from this study indicate that local variation in the intrinsic film properties plays a major role in the SFD.

36 MATERIALS SCIENCE↗

Induced ferromagnetism in Mn{sub 3}N{sub 2} phase embedded in Mn/Si{sub 3}N{sub 4} multilayers

Room temperature ferromagnetism has been obtained for different sets of Mn/Si{sub 3}N{sub 4} multilayers prepared by sputtering. In order to find the most suitable conditions to stabilize the ferromagnetic ordering in this system, the evolution of the magnetic properties has been studied for films in which the Si{sub 3}N{sub 4} layer thickness was maintained constant while that of the Mn layer was varied, [Mn(t{sub m})/Si{sub 3}N{sub 4}(3.4 nm)]{sub n}, and conversely, in [Mn(0.7 nm)/Si{sub 3}N{sub 4}(t{sub sn})]{sub 43} samples, in which the Mn layer thickness was kept constant while varying the Si{sub 3}N{sub 4} layer thickness. Structural, compositional, electronic and magnetic characterizations have been performed by means of x-ray reflectometry, Rutherford backscattering spectrometry, x-ray photoemission spectroscopy, x-ray absorption, and superconducting quantum interference device for further knowledge of the magnetic-structural relationship in this system. Our results show that the peculiar magnetic behavior of these films is mainly related to the stabilization of a slightly distorted Mn{sub 3}N{sub 2} phase that is induced by the Si{sub 3}N{sub 4} at the interfaces. For samples with larger Mn layer thickness, metallic Mn and Mn{sub 3}N{sub 2} phases coexist, which leads to a reduction of the total magnetization per Mn atom due to the presence of metallic Mn. For small Mn layer thickness (t{sub m}<0.86 nm), where noncontinuous Mn{sub 3}N{sub 2} layers are formed, the magnetization decreases noticeably due to the superparamagnetic size limit. It has been found that the best conditions for the stabilization of the ferromagnetism in this system occur when both, the manganese-rich and the silicon nitride layers, are continuous and with similar thickness, close to 3.5 nm.

36 MATERIALS SCIENCE↗

Anisotropic strain-stress state and intermixing in epitaxial Mo(110)/Ni(111) multilayers: An x-ray diffraction study

The present study deals with the analysis of elastic strains and stresses in high-quality heteroepitaxial Mo/Ni superlattices with periods {Lambda} lying in the range 4.8-27.6 nm. The strain-stress state in this lattice-mismatched system grown under energetic deposition conditions (ion beam sputtering) is rather complex, resulting from three contributions: (i) intrinsic (growth) stress due to atomic peening, (ii) coherency stresses of opposite sign in the two elemental layers due to the observed Nishiyama-Wassermann epitaxial relationship Ni[110](111)||Mo[001](110), and (iii) interfacial mixing. The measurement of the lattice parameters of Mo and Ni sublayers in various crystallographic directions was performed by x-ray diffraction, using the sin{sup 2} {psi} method adapted for epitaxial layers. A large anisotropy of elastic strain and associated in-plane coherency stresses is revealed in the Mo sublayers, while for Ni sublayers no such behavior could be detected due to the superimposition of growth variants with threefold symmetry. Postgrowth ion irradiation with Ar ions at very low dose ({approx}0.2 dpa) was employed as a powerful tool to modify the intrinsic stress, thus providing additional data to be implemented in a triaxial strain-stress model, which enabled us to separate the different stress sources (intrinsic and coherency stresses) as well as to quantify the intermixing occurring during growth. This model, which has been successfully applied previously to Mo thin films, yields in the case of multilayer systems to the determination of the ''stress-free and defect-free'' lattice parameter, a{sub 0}, i.e., solely linked to chemical mixing. The linear dependence of a{sub 0} with {Lambda} observed in both sublayers reveals an interface-mediated chemical mixing mechanism, the extent of this interfacial mixing being much more pronounced in Mo sublayers than in Ni ones.

36 MATERIALS SCIENCE↗

Thermoelectric properties of electrically stressed Sb/Bi-Sb-Te multilayered films

Electrically stressed Bi-Sb-Te thin films have demonstrated markedly enhanced Hall mobility and moderately reduced carrier concentration. To lower electrical resistivity further, a Sb-inserted Bi-Sb-Te multilayer structure was prepared through consecutively sputtering Bi-Sb-Te and Sb layers followed by electric current stressing. The electrically stressed Sb/Bi-Sb-Te film demonstrates high carrier concentration and enhanced Hall mobility. We propose that the additional Sb supply suppresses electromigration-induced Sb depletion in crystal lattices, thus maintains high carrier concentration of the Bi-Sb-Te film. The presented approach provides a simple means to optimize thermoelectric properties of Bi-Sb-Te films.

36 MATERIALS SCIENCE↗

Size dependent strengthening mechanisms in sputtered Fe/W multilayers

We investigate size dependent strengthening mechanisms in sputtered Fe/W multilayers with individual layer thickness, h, varying from 1 to 200 nm. Microstructure analyses reveal that Fe/W has incoherent bcc/bcc interface when h is greater than 5 nm. When h decreases to 1-2.5 nm, the interface becomes semicoherent, and Fe and W show significant lattice distortions comparing to their bulk counterpart due to interface constraint. The layer thickness dependent drastic variations in x-ray diffraction profiles are simulated well by using an analytical model. Film hardness increases with decreasing h, and approaches a maximum value of 12.5 GPa when h is 1 nm. The layer thickness dependent film hardnesses are compared with analytical models. Koehler's image force plays a major role in determining the maximum strength of composites at smaller h.

36 MATERIALS SCIENCE↗

OPTIMIZATION OF LAYER DENSITIES FOR MULTILAYERED INSULATION SYSTEMS

Numerous tests of various multilayer insulation systems have indicated that there are optimal densities for these systems. However, the only method of calculating this optimal density was by a complex physics based algorithm developed by McIntosh. In the 1970's much data were collected on the performance of these insulation systems with many different variables analyzed. All formulas generated included number of layers and layer density as geometric variables in solving for the heat flux, none of them was in a differentiable form for a single geometric variable. It was recently discovered that by converting the equations from heat flux to thermal conductivity using Fourier's Law, the equations became functions of layer density, temperatures, and material properties only. The thickness and number of layers of the blanket were merged into a layer density. These equations were then differentiated with respect to layer density. By setting the first derivative equal to zero, and solving for the layer density, the critical layer density was determined. This method was checked and validated using test data from the Multipurpose Hydrogen Testbed which was designed using Mcintosh's algorithm.

36 MATERIALS SCIENCE↗

Strongly enhanced incorporation of oxygen into barium titanate based multilayer ceramic capacitors using water vapor

The reoxidation of sintered BaTiO{sub 3}-based multilayer ceramic capacitors (MLCCs) is currently an empirically determined, but poorly understood, procedure. In this work, the incorporation of oxygen into BaTiO{sub 3}-based MLCCs has been studied by means of isotope exchange annealing ({sup 18}O{sub 2}/{sup 16}O{sub 2}, {sup 1}H{sub 2}{sup 18}O/{sup 1}H{sub 2}{sup 16}O or {sup 2}H{sub 2}{sup 16}O/{sup 1}H{sub 2}{sup 16}O) and subsequent determination of the isotope profiles in the solid by secondary ion mass spectrometry. Oxygen isotope profiles in the barium titanate dielectric can be described by a bulk diffusion coefficient D* and a surface exchange coefficient k*. The values obtained for k* indicate that oxygen incorporation from H{sub 2}O is much faster than from dry O{sub 2}; it thus plays the key role in the reoxidation process.

36 MATERIALS SCIENCE↗

A W/B{sub 4}C Transmission Multilayer as an Achromatic Phase Shifter in the XUV: Some Experimental Aspects

Completing previous investigations we study a W/B{sub 4}C transmission multilayer with 350 periods each 1.74 nm as a phase shifter for polarization analysis between 720 eV and 1020 eV. The FWHM of the Bragg curve is as small as 0.18 deg. = 3 mrad and thus smaller than the inherent accuracy of most polarimeters. We discuss some of the experimental implications and limitations. We obtain a phase shift of up to {Delta} = 24 deg. through out the spectral range.

43 PARTICLE ACCELERATORS↗

Effects of total thickness on (001) texture, surface morphology, and magnetic properties of [Fe/Pt]{sub n} multilayer films by monatomic layer deposition

Atomic-scale [Fe/Pt]{sub n} multilayer films with different total thickness were prepared on thermally oxidized Si (100) substrates at room temperature by monatomic layer deposition using dc-magnetron and rf-magnetron sputtering. Effects of the total thickness on (001) texture, surface morphology, and magnetic properties of the postannealed films have been investigated. It is found that the particlelike structure films with perfect (001) texture and perpendicular magnetic anisotropy are obtained with a thickness of less than or equal to 6.5 nm. After 500 deg. C annealing, the films with thickness of 6.5 and 11.9 nm show very smooth surface. In addition, with increasing total thickness of the films, (001) texture and perpendicular magnetic anisotropy of the annealed films deteriorate, and the films become continuous in structure. The total thickness of the films also affects the exchange-coupling interaction among FePt magnetic grains and the magnetization reversal process.

36 MATERIALS SCIENCE↗

Swift Heavy Ion Irradiation Effect On Nanometer Range W/Fe Multilayers

The present study reports the effect of swift heavy ion irradiation on structural and magnetic properties of sputtered Fe/W multilayer structure (MLS) having a bilayer composition of [W(30A)/Fe(20A)]{sub 10BL}. The MLS was irradiated by 120 MeV Au{sup 9+} ions up to fluence of 4x10{sup 13} ions/cm{sup 2}. Structural study of pristine and irradiated MLS reveals that intra-layer microstructure of Fe-layers in the MLS becomes nano-crystalline on irradiation. Magnetic studies show increase in coercivity at higher fluence which may be due to increase in surface and interface roughness after recrystallization of Fe-layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correspondence Between Magnetoresistance and Magnetization in Co/Cu Multilayers Studied at Higher Spacer Layer Thickness

A series of [Cu(t{sub Cu})/Co(25 A)]{sub 25} multilayers at higher spacer layer thickness have been deposited by dc magnetron sputtering. Magnetoresistance (MR) measurements have been carried out at different temperatures. MR curves showed hysteresis by displaying peaks at magnetic field H{sub p}. The field values exhibiting the maximum resistance in the magnetoresistance curve (H{sub p}) were greater than the coercivity (H{sub c}). The correspondence between the shape of the MR curve and that of the magnetization curve has been established and observed peak splitting in MR curves is attributed to a hardening in the magnetization reversal of some magnetic grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effective work function lowering of multilayer graphene films by subnanometer thick AlO{sub x} overlayers

A simple method for controlling the effective work function (WF) of conductive multilayer graphene (MLG) film, synthesized by using chemical vapor deposition and transferred to a dielectric substrate, was developed. The WFs of the MLG during the step-by-step deposition of aluminum (Al) were measured using in situ ultraviolet photoelectron spectroscopy. Core-level spectra were also collected to investigate the chemical reaction that occurred when a small amount of Al was deposited onto MLG in a stepwise manner. The measurements revealed that the effective WF of the conductive MLG film could be controlled from 3.77 to 4.40 eV by the deposition of an Al layer less than 0.6 nm thick.

36 MATERIALS SCIENCE↗

Optimization and Characterisation of Amorphous Iron Disilicide formed by Ion Beam Mixing of Fe/Si Multilayer Structures for Photovoltaic Applications

This study presents an optimization and characterization of amorphous Iron Disilicide (a-FeSi{sub 2}) synthesized using Ion Beam Mixing (IBM) of Fe/Si multilayer structures. The layers were deposited using RF magnetron sputtering, and subsequently irradiated with Ar{sup +} and Fe{sup +} beams of 150 and 200 keV. Rutherford Back Scattering (RBS) analysis was used to determine the structure and level of silicidation of the samples. The nature of the band-gap and the optical absorption coefficients were determined by optical transmission analysis. The results demonstrate that the synthesis of a-FeSi{sub 2} can be achieved using this technique, with the total level of silicidation being highly dependant upon the initial structure configuration and beam parameters. Direct band-gap energies of {approx}0.90 eV have been observed for those samples with the highest levels of silicidation, with optical absorption coefficients of {approx}10{sup 4} cm{sup -1}. Therefore this method of fabrication has been shown to produce a-FeSi{sub 2} layers without the need for post-synthesis treatment, using established technologies without compromising the optical properties that make this material such a promising semiconductor for the photovoltaics market.

36 MATERIALS SCIENCE↗

Growth of multilayers of Bi{sub 2}Se{sub 3}/ZnSe: Heteroepitaxial interface formation and strain

Multilayers of Bi{sub 2}Se{sub 3}/ZnSe with the periodicity of a few nanometers were grown by molecular-beam epitaxy on Si(111). While epitaxial growth of Bi{sub 2}Se{sub 3} on ZnSe proceeded by two-dimensional nucleation, ZnSe growth on Bi{sub 2}Se{sub 3} showed the three-dimensional growth front. Therefore, the two complementary interfaces of Bi{sub 2}Se{sub 3}/ZnSe were asymmetric in morphological properties. Strain-relaxation rates were found to differ between epitaxial ZnSe and Bi{sub 2}Se{sub 3}, which could be attributed to the specific growth modes and the properties of Bi{sub 2}Se{sub 3} and ZnSe surfaces.

36 MATERIALS SCIENCE↗

Microwave assisted magnetization switching in Co/Pt multilayer

In this study, we have experimentally investigated the microwave assisted magnetization by switching (MAS) on the microstructured Co/Pt multilayer. The sample exhibits the typical magnetization curve peculiar to perpendicular anisotropy films, that is, a steep reversal initiated by nucleation of a reversed domain followed by its subsequent gradual expansion by the domain wall displacement. By applying microwaves with the frequency of GHz order, the nucleation field H{sub n} is significantly reduced at three frequencies. Taking into account the effective anisotropy field of our sample, the first dip of H{sub n} at the lowest frequency probably corresponds to the Kittel mode excitation, and the other two dips at higher frequencies correspond to unidentified excitation modes other than the Kittel mode. Among them, the last dip of H{sub n} at the highest frequency reaches about 1/3 of that without microwave application. These results suggest the existence of more effective excitation modes for MAS than the Kittel mode.

36 MATERIALS SCIENCE↗

Adsorption of ammonia on multilayer iron phthalocyanine

The adsorption of ammonia on multilayers of well-ordered, flat-lying iron phthalocyanine (FePc) molecules on a Au(111) support was investigated by x-ray photoelectron spectroscopy. We find that the electron-donating ammonia molecules coordinate to the metal centers of iron phthlalocyanine. The coordination of ammonia induces changes of the electronic structure of the iron phthalocyanine layer, which, in particular, lead to a modification of the FePc valence electron spin.

36 MATERIALS SCIENCE↗