Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple scattering effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

1 SEISMIC AMPLITUDES AND ATTENUATIONS OF GAS HYDRATEBEARING SEDIMENTS IN FRACTURED AND SAND RESERVOIRS

Seismic amplitude is principally affected by velocities above and below an interface. However, the amplitude presents attenuation on the hydrate bearing sediments. Thus, seismic interpretation relied on amplitude in elastic wave behavior can not completely reveal seismic characteristics of the hydrate bearing sediments, especially if multiple hydrate layers are present. In the paper, we discuss the physical mechanisms of intrinsic and scattering attenuations. Some previous lab measurements and viscoelastic modeling studies show attenuation behaviors on low frequency and synthetic seismic. Two offset wells provide log data of resistivity, porosity, density, and sonic velocities for identifying hydrate layers and, therefore, allow us to investigate the behaviors of attenuations. The intrinsic and scattering attenuations are significantly in strong dissolved or free gas filling fractures/faults. Hydrate filling fractures/faults are expected to have the effects of intrinsic and scattering attenuations, however it is difficult to distinguish them from no-hydrate filling fractures/faults. In no-fracture/fault zone above the BSR, significant amplitude reduction comparing to background indicates possible fracture-filling hydrate or pore-filling hydrate.

attenuation↗

Measurement of the sodium and iodine scintillation quenching factors across multiple NaI(Tl) detectors to identify systematics

The amount of light produced by nuclear recoils in scintillating targets is strongly quenched compared to that produced by electrons. A precise understanding of the quenching factor is particularly interesting for weakly interacting massive particles (WIMP) searches and coherent elastic neutrino-nucleus scattering ( CE ν NS ) measurements since both rely on nuclear recoils, whereas energy calibrations are more readily accessible from electron recoils. There is a wide variation among the current measurements of the quenching factor in sodium iodide (NaI) crystals, especially below 10 keV, the energy region of interest for dark matter and CE ν NS studies. A better understanding of the quenching factor in NaI(Tl) is of particular interest for resolving the decades-old puzzle in the field of dark matter between the null results of most WIMP searches and the claim for dark matter detection by the DAMA/LIBRA collaboration. In this work, we measured sodium and iodine quenching factors for five small NaI(Tl) crystals grown with similar thallium concentrations and growth procedures. Unlike previous experiments, multiple crystals were tested, with measurements made in the same experimental setup to control systematic effects. The quenching factors agree in all crystals we investigated, and both sodium and iodine quenching factors are smaller than those reported by DAMA/LIBRA. The dominant systematic effect was due to the electron equivalent energy calibration originating from the nonproportional behavior of the NaI(Tl) light yield at lower energies, potentially the cause for the discrepancies among the previous measurements. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Technical Note: Improved implementation of doppler broadening in MCNP5

Purpose: Incoherent scattering has a substantial effect on spectroscopic measurements and simulations. Many general-purpose Monte Carlo codes include models that account for the effects of bound electrons on incoherent scattering, including Doppler broadening (DB). This work investigates the DB model used in the Monte Carlo N-particle transport code (MCNP5). Methods: Simulations were run with three versions of MCNP5: v1.51, v1.60, and a modified form of v1.60 (v1.60m). All simulations used the MCPLIB04 photon data library, which presents the electron subshell data for incoherent scattering in the form of a probability density function. In v1.60m, the source code was altered to sample the electron subshell from a cumulative density function instead. Each version of the code was tested using an identical set of simulations that investigated DB in a slab of silicon at scattering angles of 15 Degree-Sign , 30 Degree-Sign , and 45 Degree-Sign . For each angle, simulations were run for multiple energies between 200 keV and 800 keV. The spectrum of singly-scattered photons at the exit of the slab was scored. Spectra were analytically calculated for comparison. Results: In v1.51, DB was modeled for incident photon energies below 760 keV, 384 keV, and 260 keV at scattering angles of 15 Degree-Sign , 30 Degree-Sign , and 45 Degree-Sign , respectively. Above these energy thresholds, v1.51 did not model DB. The spectra calculated using v1.60 and v1.60m exhibited DB for all energy-angle combinations; however, v1.60m, exhibited more energy broadening than did v1.60. The spectra calculated with v1.60m agreed with the analytical calculations. Conclusions: MCNP5 v1.51 and v1.60 model partial broadening when used with the MCPLIB04 data library. MCNP5 v1.60m models DB more accurately due to the form of the electron subshell data. In response to these results, Los Alamos National Laboratory has released a new photon data library, MCPLIB84, that presents the electron subshell data in cumulative distribution form. MCNP5 v1.60 should be used with this library when incoherent scattering has a significant impact on simulation results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of Ti and Zn Doping on the Structural, Electric, and Magnetic Properties of GaFeO{sub 3}

Multidoped (Zn,Ti) gallium orthoferrite [GaFeO{sub 3} and Ga{sub 0.98}Zn{sub 0.02}Fe{sub 0.98}Ti{sub 0.02}O{sub 3}] ceramic was synthesized through a solid-state reaction. X-ray analysis of the prepared material provides its basic crystal data of a single-phase orthorhombic system. The scattered crystallite size and lattice strain of the material were estimated. Analysis of the micrograph of field emission scanning electron microscope shows uniform grain distribution in the sample, suggesting the formation of good quality of sample. Founded on the magnetic measurements, it is concluded that (Zn,Ti)-modified gallium ferrite has provided a reduction in the Curie temperature (T{sub C}); however, no significant changes in the magnetization values with Zn and Ti integration in GaFeO{sub 3} lattice. A noteworthy effect of substitution of multiple elements at the Ga and Fe sites on dielectric constant and tangent loss of GaFeO{sub 3} has been observed. Complete studies of temperature (180–400 K) and frequency (10–10{sup 7} Hz) dependence of dielectric constant and impedance have provided the effect of grains and grain boundaries on the conduction mechanism and dielectric relaxation of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe

We report several synergistic effects in Hg alloying of SnTe to enhance the power factor and overall figure of merit ZT. Hg alloying decreases the energy separation between the two valence bands, leading to pronounced band convergence that improves the Seebeck coefficient. Hg alloying of SnTe also significantly enlarges the band gap thereby effectively suppressing the bipolar diffusion. Collectively, this results in high ZT of similar to 1.35 at 910 K for 2% Bi-doped SnTe with 3% HgTe. The solubility limit of Hg in SnTe is less than 3 mol%, and above this level we observe HgTe precipitates in the SnTe matrix, typically trapped at grain boundary triple junctions. The strong point defect scattering of phonons caused by Hg alloying coupled with mesoscale scattering via grain boundaries contributes to a great reduction of lattice thermal conductivity. The multiple synergistic roles that Hg plays in regulating the electron and phonon transport in SnTe provide important new insights into continued optimization of SnTe-based and related materials.

Tan, Gangjian↗

Tycho: Realistically Simulating Exoplanets within Stellar Clusters. I. Improving the Monte Carlo Approach

To fully understand the diverse population of exoplanets, we must study their early lives within open clusters, the birthplace of most stars with masses >0.5M {sub ⊙} (including those currently in the field). Indeed, when we observe planets within clustered environments, we notice highly eccentric and odd systems that suggest the importance of dynamical pathways created by interactions with additional bodies (as in the case of HD 285507b). However, it has proven difficult to investigate these effects, as many current numerical solvers for the multi-scale N-body problem are simplified and limited in scope. To remedy this, we aim to create a physically complete computational solution to explore the role of stellar close encounters and interplanetary interactions in producing the observed exoplanet populations for both open cluster stars and field stars. We present a new code, Tycho, which employs a variety of different computational techniques, including multiple N-body integration methods, close encounter handling, modified Monte Carlo scattering experiments, and a variety of empirically informed initial conditions. We discuss the methodology in detail, and its implementation within the AMUSE software framework. Approximately 1% of our systems are promptly disrupted by star-star encounters contributing to the rogue planets occurrence rate. Additionally, we find that close encounters which that perturb long-period planets lead to 38.3% of solar-system-like planetary systems becoming long-term unstable.

79 ASTRONOMY AND ASTROPHYSICS↗

Scattering from coated structures and antenna pattern control using impedance surfaces, part A/B

The scattering from coated, conducting structures, specifically the coated dihedral corner reflector configuration and the coated strip/plate configuration is examined. The formulation uses impedance-wedge Uniform Theory of Diffraction scattering coefficients to calculate the diffracted fields. A finite-thickness coating is approximated using the impedance boundary condition to arrive at an equivalent impedance for the coating. The formulation of the impedance wedge coefficients is outlined. Far-field, perfectly conducting approximations are discussed. Problems with the present dihedral corner reflector model for certain angles of incidence and observation are discussed along with a potentially rectifying modification. Also, the capacity to measure the electromagnetic properties of lossy materials was developed. The effects of using multiple material coatings on the radiation pattern of the horn antenna were studied. Numerous computations were devoted toward the inverse problem of synthesizing desired radiation patterns using the impedance surfaces. Stabilizing the equivalent sheet impedance using the linear control condition was attempted, and it was found to be a very difficult task.

Balanis, Constantine A.↗

Temperature Distribution in a Composite of Opaque and Semitransparent Spectral Layers

The analysis of radiative transfer becomes computationally complex for a composite when there are multiple layers and multiple spectral bands. A convenient analytical method is developed for combined radiation and conduction in a composite of alternating semitransparent and opaque layers. The semi- transparent layers absorb, scatter, and emit radiation, and spectral properties with large scattering are included. The two-flux method is used, and its applicability is verified by comparison with a basic solution in the literature. The differential equation in the two-flux method Is solved by deriving a Green's function. The solution technique is applied to analyze radiation effects in a multilayer zirconia thermal barrier coating with internal radiation shields for conditions in an aircraft engine combustor. The zirconia radiative properties are modeled by two spectral bands. Thin opaque layers within the coating are used to decrease radiant transmission that can degrade the zirconia insulating ability. With radiation shields, the temperature distributions more closely approach the opaque limit that provides the lowest metal wall temperatures.

Siegel, Robert↗

Investigating the p--π ± and p--p--π ± dynamics with femtoscopy in pp collisions at $\sqrt{s}$ = 13 TeV

The interaction between pions and nucleons plays a crucial role in hadron physics. It represents a fundamental building block of the low-energy QCD dynamics and is subject to several resonance excitations. This work studies the p--π ± dynamics using femtoscopic correlations in high-multiplicity pp collisions at $\sqrt{s}$ = 13 TeV measured by ALICE at the LHC. As the final-state interaction between protons and pions is well constrained by scattering experiments and the study of pionic hydrogen, the results give access to information on the particle-emitting source in pp collisions using the femtoscopy methods. The scaling of the source size of primordial protons and pions against their pair transverse mass is extracted. The results are compared with the source sizes studied with p–p, p--K + , and π ± –π ± pairs by ALICE in the same collision system and are found to be in agreement for the different particle pairs. This reinforces recent findings by ALICE of a common emission source for all hadron-pairs in pp collisions at LHC energies. Furthermore, the p--p--π ± systems are studied using three-particle femtoscopy in pp collisions at TeV. The presence of three-body effects is analyzed utilizing the cumulant expansion method. In this formalism, the known two-body interactions are subtracted in order to isolate the three-body effects. For both, p--p--π + and p--p--π – , a non-zero cumulant is found, indicating effects beyond pairwise interactions. These results give information on the coupling of the pion to multiple nucleons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dose enhancement in radiotherapy of small lung tumors using inline magnetic fields: A Monte Carlo based planning study

Purpose: To report on significant dose enhancement effects caused by magnetic fields aligned parallel to 6 MV photon beam radiotherapy of small lung tumors. Findings are applicable to future inline MRI-guided radiotherapy systems. Methods: A total of eight clinical lung tumor cases were recalculated using Monte Carlo methods, and external magnetic fields of 0.5, 1.0, and 3 T were included to observe the impact on dose to the planning target volume (PTV) and gross tumor volume (GTV). Three plans were 6 MV 3D-CRT plans while 6 were 6 MV IMRT. The GTV’s ranged from 0.8 to 16 cm{sup 3}, while the PTV’s ranged from 1 to 59 cm{sup 3}. In addition, the dose changes in a 30 cm diameter cylindrical water phantom were investigated for small beams. The central 20 cm of this phantom contained either water or lung density insert. Results: For single beams, an inline magnetic field of 1 T has a small impact in lung dose distributions by reducing the lateral scatter of secondary electrons, resulting in a small dose increase along the beam. Superposition of multiple small beams leads to significant dose enhancements. Clinically, this process occurs in the lung tissue typically surrounding the GTV, resulting in increases to the D{sub 98%} (PTV). Two isolated tumors with very small PTVs (3 and 6 cm{sup 3}) showed increases in D{sub 98%} of 23% and 22%. Larger PTVs of 13, 26, and 59 cm{sup 3} had increases of 9%, 6%, and 4%, describing a natural fall-off in enhancement with increasing PTV size. However, three PTVs bounded to the lung wall showed no significant increase, due to lack of dose enhancement in the denser PTV volume. In general, at 0.5 T, the GTV mean dose enhancement is around 60% lower than that at 1 T, while at 3 T, it is 5%–60% higher than 1 T. Conclusions: Monte Carlo methods have described significant and predictable dose enhancement effects in small lung tumor plans for 6 MV radiotherapy when an external inline magnetic field is included. Results of this study indicate that future clinical inline MRI-guided radiotherapy systems will be able to deliver a dosimetrically superior treatment to small (PTV < 15 cm{sup 3}), isolated lung tumors over non-MRI-Linac systems. This increased efficacy coincides with the reimbursement in the United States of lung CT screening and the likely rapid growth in the number of patients with small lung tumors to be treated with radiotherapy.

61 RADIATION PROTECTION AND DOSIMETRY↗

Tensile strained Ge tunnel field-effect transistors: k · p material modeling and numerical device simulation

Group IV based tunnel field-effect transistors generally show lower on-current than III-V based devices because of the weaker phonon-assisted tunneling transitions in the group IV indirect bandgap materials. Direct tunneling in Ge, however, can be enhanced by strain engineering. In this work, we use a 30-band k · p method to calculate the band structure of biaxial tensile strained Ge and then extract the bandgaps and effective masses at Γ and L symmetry points in k-space, from which the parameters for the direct and indirect band-to-band tunneling (BTBT) models are determined. While transitions from the heavy and light hole valence bands to the conduction band edge at the L point are always bridged by phonon scattering, we highlight a new finding that only the light-hole-like valence band is strongly coupling to the conduction band at the Γ point even in the presence of strain based on the 30-band k · p analysis. By utilizing a Technology Computer Aided Design simulator equipped with the calculated band-to-band tunneling BTBT models, the electrical characteristics of tensile strained Ge point and line tunneling devices are self-consistently computed considering multiple dynamic nonlocal tunnel paths. The influence of field-induced quantum confinement on the tunneling onset is included. Our simulation predicts that an on-current up to 160 (260) μA/μm can be achieved along with on/off ratio > 10{sup 6} for V{sub DD} = 0.5 V by the n-type (p-type) line tunneling device made of 2.5% biaxial tensile strained Ge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Balance functions of (un)identified hadrons in Pb–Pb, p–Pb, and pp collisions at the LHC

In ultrarelativistic heavy-ion collisions, correlations of particles with opposite quantum numbers provide insight into quark production mechanisms and time scales, collective motion, and re-scattering in the hadronic phase. The longitudinal and azimuthal widths of balance functions for charged kaons and charged pions are used to examine the two-wave quark production model proposed to explain quark-antiquark production within the QGP, which predicts a large increase in up and down quark pairs relative to strange quark pairs around the time of hadronization. Balance functions are also analyzed in small collision systems such as p–Pb and pp to study fragmentation effects and possible collective effects in high-multiplicity events. A comprehensive set of balance functions has been measured using the ALICE detector, including results for unidentified hadrons in Pb–Pb and p–Pb collisions at √ s NN = 5.02 TeV, for charged pions in Pb–Pb collisions at √ s NN = 2.76 TeV, p–Pb collisions at √ s NN = 5.02 TeV and pp collisions at √ s NN = 7 TeV, and for charged kaons in Pb–Pb collisions at √ s NN = 2.76 TeV. The first balance function yield results are also presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Observation of solid-state bidirectional thermal conductivity switching in antiferroelectric lead zirconate (PbZrO 3 )

Materials with tunable thermal properties enable on-demand control of temperature and heat flow, which is an integral component in the development of solid-state refrigeration, energy scavenging, and thermal circuits. Although gap-based and liquid-based thermal switches that work on the basis of mechanical movements have been an effective approach to control the flow of heat in the devices, their complex mechanisms impose considerable costs in latency, expense, and power consumption. As a consequence, materials that have multiple solid-state phases with distinct thermal properties are appealing for thermal management due to their simplicity, fast switching, and compactness. Thus, an ideal thermal switch should operate near or above room temperature, have a simple trigger mechanism, and offer a quick and large on/off switching ratio. In this study, we experimentally demonstrate that manipulating phonon scattering rates can switch the thermal conductivity of antiferroelectric PbZrO 3 bidirectionally by –10% and +25% upon applying electrical and thermal excitation, respectively. Our approach takes advantage of two separate phase transformations in PbZrO 3 that alter the phonon scattering rate in different manners. In this study, we demonstrate that PbZrO 3 can serve as a fast (<1 second), repeatable, simple trigger, and reliable thermal switch with a net switching ratio of nearly 38% from ~1.20 to ~1.65 W m –1 K –1 .

25 ENERGY STORAGE↗

A Free Spectroscopic Databank of Optical Constants for Use in Optics Education and Modeling: complex refractive index data n and k from 1.0 to 25 um

The reflectance spectra of solid and liquids can be complicated since they depend not only on absorption, but also on the refraction, reflection, and scattering of light, all of which are wavelength dependent. The physical form and morphological effects associated with solid and liquid samples are thus known to affect their reflectance spectra in a non-linear fashion, particularly in the infrared. Measuring the optical constants n(?) and k(?) represents an alternative approach, allowing one to model these many effects and thus requiring fewer laboratory measurements. In this paper an overview is presented of the protocols used to measure the n/k optical constants, particularly for liquids. For the liquids, a multiple path length measurements approach is employed, and in this paper we demonstrate the method to determine the complex optical constants n(?) and k(?) of squalene. The resultant calculated spectra of 1 µm and 100 µm thick layers of squalene on an aluminum substrate as derived from the experimental n(?) and k(?) values are shown to demonstrate such effects. The public availability of the n(?)/k(?) data as well as solids hemispherical reflectance data are also discussed.

optical constants, refractive index, solids, Liqui↗

SU-E-T-505: CT-Based Independent Dose Verification for RapidArc Plan as a Secondary Check

Purpose: To design and develop a CT-based independent dose verification for the RapidArc plan and also to show the effectiveness of inhomogeneous correction in the secondary check for the plan. Methods: To compute the radiological path from the body surface to the reference point and equivalent field sizes from the multiple MLC aperture shapes in the RapidArc MLC sequences independently, DICOM files of CT image, structure and RapidArc plan were imported to our in-house software. The radiological path was computed using a three-dimensional CT arrays for each segment. The multiple MLC aperture shapes were used to compute tissue maximum ratio and phantom scatter factor using the Clarkson-method. In this study, two RapidArc plans for oropharynx cancer were used to compare the doses in CT-based calculation and water-equivalent phantom calculation using the contoured body structure to the dose in a treatment planning system (TPS). Results: The comparison in the one plan shows good agreement in both of the calculation (within 1%). However, in the other case, the CT-based calculation shows better agreement compared to the water-equivalent phantom calculation (CT-based: -2.8% vs. Water-based: -3.8%). Because there were multiple structures along the multiple beam paths and the radiological path length in the CT-based calculation and the path in the water-homogenous phantom calculation were comparatively different. Conclusion: RapidArc treatments are performed in any sites (from head, chest, abdomen to pelvis), which includes inhomogeneous media. Therefore, a more reliable CT-based calculation may be used as a secondary check for the independent verification.

60 APPLIED LIFE SCIENCES↗

Epitaxial synthesis of diamond layers on a monocrystalline diamond substrate in a torch microwave plasmatron

The epitaxial growth of a diamond single-crystal film in a torch microwave discharge excited by a magnetron of a domestic microwave oven with the power of {<=}1 kW in an argon-hydrogen-methane mixture with a high concentration of methane (up to 25% with respect to hydrogen) at atmospheric pressure on a sub-strate of a synthetic diamond single crystal (HPHP) with the orientation (100) and 4 Multiplication-Sign 4 mm in size is obtained. A discharge with the torch diameter of {approx}2 mm and the concentration of the microwave power absorbed in the torch volume of >10{sup 3} W/cm{sup 3} is shown to be effective for epitaxial enlargement of a single crystal of synthetic diamond. The structure of the deposited film with the thickness up to 10 {mu}m with high-quality morphology is investigated with an optical microscope as well as using the methods of the Raman scattering and scanning electron microscopy.

36 MATERIALS SCIENCE↗

Doping dependent blue shift and linewidth broadening of intersubband absorption in non-polar m-plane AlGaN/GaN multiple quantum wells

Blue shift and broadening of the absorption spectra of mid-infrared intersubband transition in non-polar m-plane AlGaN/GaN 10 quantum wells were observed with increasing doping density. As the doping density was increased from 6.6 × 10{sup 11} to 6.0 × 10{sup 12 }cm{sup −2} per a quantum well, the intersubband absorption peak energy shifted from 274.0 meV to 302.9 meV, and the full width at half maximum increased from 56.4 meV to 112.4 meV. Theoretical calculations reveal that the blue shift is due to many body effects, and the intersubband linewidth in doped AlGaN/GaN QW is mainly determined by scattering due to interface roughness, LO phonons, and ionized impurities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interference effects in proton scattering on {sup 15}N nuclei at intermediate energies

The differential cross section for proton scattering on {sup 15}N nuclei is calculated within Glauber diffraction theory at energies of 0.2, 0.6, and 1.0 GeV. Use is made of the shell-model wave function for the {sup 15}N nucleus. The contribution of single and double collisions to the Glauber operator {Omega} is taken into account. The sensitivity of the differential cross sections to the contributions of scattering on nucleons from different shells, to the parameters of the elementary pN amplitude, and to the energy of projectile protons is investigated. It is shown that the interference between amplitudes corresponding to different collision multiplicities, as well as between the amplitudes for scattering on nucleons from different shells, determines special features of the cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗